Chapter 2: Electrochemistry
Electrochemistry is a two-way street between chemistry and electricity: spontaneous chemical reactions can produce electricity, and electricity can force non-spontaneous reactions to happen. Let’s break every concept down step by step so nothing feels overwhelming!
Chapter 2 Visual Roadmap — Pick Any Topic
Jump to Final NCERT Summary Page ↓Page 1 of 10 · FoundationsNCERT 2.1–2.2
NCERT Sections 2.1 & 2.2 · Galvanic Cells & SHE
Electrochemical Cells, Daniell Cell & Standard Electrode Potential
Big Idea in 3 Simple Points (Read This First!)
- Galvanic (Voltaic) Cell: Uses a natural (spontaneous) chemical reaction to produce electricity — just like a Daniell cell giving $1.1\text{ V}$.
- Electrolytic Cell: Uses an external battery to force a non-spontaneous reaction to happen.
- Same Cell Can Flip Roles: Push back on a Daniell cell with an opposing voltage ($E_{\text{ext}} \gt 1.1\text{ V}$), and it reverses into an electrolytic cell!
What You Will Master in This Chapter (NCERT Objectives)
- Differentiate galvanic vs electrolytic cells
- Apply Nernst equation & define standard $E^\circ$
- Connect $E_{\text{cell}}^\circ$, Gibbs energy ($\Delta_r G^\circ$), and $K_c$
- Define resistivity ($\rho$), conductivity ($\kappa$), and $\Lambda_m$
- Differentiate metallic vs electrolytic conductance
- Measure ionic conductivity via AC Wheatstone bridge
- Explain dilution curves ($\kappa, \Lambda_m$) & $\Lambda_m^\circ$
- Apply Kohlrausch’s law to weak electrolytes
- Use Faraday’s laws & predict electrolysis products
- Learn primary, secondary batteries & fuel cells
- Understand corrosion (rusting) as an electrochemical cell
Interactive Lab 1: Daniell Cell Under External Voltage $E_{\text{ext}}$ (NCERT Figs. 2.1 & 2.2)
Move the slider past $1.10\text{ V}$ to see how a Galvanic cell stops at $1.10\text{ V}$ and flips into an Electrolytic cell.
Operating Mode
Galvanic Cell
Net Reaction
Zn + Cu²⁺ → Zn²⁺ + Cu
When $E_{\text{ext}} \lt 1.1\text{ V}$, electrons flow from $\text{Zn}$ to $\text{Cu}$ (current flows $\text{Cu} \to \text{Zn}$). $\text{Zn}$ dissolves at the anode and $\text{Cu}$ deposits at the cathode.
How a Galvanic Cell Creates Voltage (4 Easy Steps)
- Two Half-Cells (Redox Couples): Place a $\text{Zn}$ rod in $\text{ZnSO}_4$ (oxidation half-cell) and a $\text{Cu}$ rod in $\text{CuSO}_4$ (reduction half-cell).
- Charge Separation Develops Electrode Potential: At each metal–solution boundary, metal ions try to deposit while metal atoms try to dissolve as ions, leaving a potential difference called electrode potential. (When all concentrations $= 1\text{ mol dm}^{-3}$, it is called standard electrode potential, $E^\circ$.)
- Connect Externally & Internally: Join the rods with a metallic wire (electrons flow from negative anode $\text{Zn}$ to positive cathode $\text{Cu}$; current flows opposite) and connect the solutions with a salt bridge (not required if both electrodes dip in the same electrolyte).
- Two Half-Reactions Add Up (Eqs. 2.1–2.3): $\text{Zn}(s) \to \text{Zn}^{2+} + 2e^-$ (Anode, oxidation) + $\text{Cu}^{2+} + 2e^- \to \text{Cu}(s)$ (Cathode, reduction) $\implies \text{Zn}(s) + \text{Cu}^{2+}(aq) \to \text{Zn}^{2+}(aq) + \text{Cu}(s)$.
Differentiation: Galvanic Cell vs Electrolytic Cell
| Basis of Difference | Galvanic / Voltaic Cell (2.2) | Electrolytic Cell (2.5) |
|---|---|---|
| Energy Conversion | Converts chemical energy of a redox reaction into electrical energy | Uses electrical energy to drive a chemical reaction |
| Spontaneity & $\Delta_r G$ | Spontaneous reaction ($\Delta_r G \lt 0$, $E_{\text{cell}} \gt 0$) | Non-spontaneous reaction ($\Delta_r G \gt 0$) |
| Anode Sign (Oxidation) | Negative ($-$) electrode (releases electrons) | Positive ($+$) electrode (connected to $+$ terminal of battery) |
| Cathode Sign (Reduction) | Positive ($+$) electrode (accepts electrons) | Negative ($-$) electrode (connected to $-$ terminal of battery) |
| Daniell Condition | $E_{\text{ext}} \lt 1.1\text{ V}$ (at $1\text{ M}$ $\text{Zn}^{2+}, \text{Cu}^{2+}$) | $E_{\text{ext}} \gt 1.1\text{ V}$ ($\text{Zn}$ deposits, $\text{Cu}$ dissolves) |
| Salt Bridge / Setup | Two half-cells usually joined by a salt bridge | Both electrodes usually dip in the same vessel |
IUPAC Galvanic Cell Notation & Cell EMF
NCERT Eqs. (2.2)–(2.7)Left • Oxidation • Anode • Negative.
Also remember: by IUPAC rules, standard reduction potentials are simply called standard electrode potentials ($E^\circ$).
2.2.1 Measuring Electrode Potential with SHE
NCERT Fig. 2.3: Standard Hydrogen Electrode (SHE)
Assigned $E^\circ = 0.00\text{ V}$ at all temperatures
How We Find Any Unknown $E^\circ$
- Why SHE is needed: A single half-cell’s potential cannot be measured alone — only the difference between two half-cells can!
- Setup: Put SHE on the left ($\text{Pt}(s)\,|\,\text{H}_2(g, 1\text{ bar})\,|\,\text{H}^+(1\text{ M})$) and the unknown electrode on the right: $E^\circ = E^\circ_R - 0 = E^\circ_R$.
- SHE Half-Reaction: $\text{H}^+(aq) + e^- \to \frac{1}{2}\text{H}_2(g)$ ($E^\circ = 0.00\text{ V}$).
- If $E^\circ$ is Positive ($\text{Cu}^{2+}/\text{Cu} = +0.34\text{ V}$): $\text{Cu}^{2+}$ reduces more easily than $\text{H}^+$. So $\text{Cu}$ does NOT dissolve in $\text{HCl}$! (In $\text{HNO}_3$, $\text{NO}_3^-$ oxidises $\text{Cu}$, NOT $\text{H}^+$.)
- If $E^\circ$ is Negative ($\text{Zn}^{2+}/\text{Zn} = -0.76\text{ V}$): $\text{H}^+$ oxidises $\text{Zn}$ (zinc releases $\text{H}_2$ gas with acids).
- Inert Electrodes ($\text{Pt}, \text{Au}$): Do not react chemically; only provide a surface to conduct electrons (e.g., $\text{Pt}\,|\,\text{Br}_2(aq)\,|\,\text{Br}^-(aq)$).
How to Read the Electrochemical Series (NCERT Table 2.1 at $298\text{ K}$)
One simple rule makes Table 2.1 effortless: higher $E^\circ$ = stronger oxidising agent (loves gaining $e^-$); lower $E^\circ$ = stronger reducing agent (loves losing $e^-$).
| Half-Cell Reduction Reaction | $E^\circ\text{ / V}$ | What It Means for Exams |
|---|---|---|
| $\text{F}_2(g) + 2e^- \to 2\text{F}^-$ | $+2.87$ | Strongest oxidising agent ($\text{F}_2$); weakest reducing agent ($\text{F}^-$) |
| $\text{MnO}_4^- + 8\text{H}^+ + 5e^- \to \text{Mn}^{2+} + 4\text{H}_2\text{O}$ | $+1.51$ | Very strong oxidant (oxidises $\text{Fe}^{2+}, \text{Cl}^-, \text{Br}^-, \text{I}^-$) |
| $\text{Cl}_2 + 2e^- \to 2\text{Cl}^-$ / $\text{Cr}_2\text{O}_7^{2-} \to 2\text{Cr}^{3+}$ | $+1.36\ /\ +1.33$ | Also note: $\text{O}_2/\text{H}_2\text{O} = +1.23\text{ V}$, $\text{Br}_2/\text{Br}^- = +1.09\text{ V}$ |
| $\text{Ag}^+ + e^- \to \text{Ag}$ / $\text{Fe}^{3+} + e^- \to \text{Fe}^{2+}$ | $+0.80\ /\ +0.77$ | $\text{Ag}^+, \text{Br}_2, \text{Cl}_2$ oxidise $\text{Fe}^{2+}$ to $\text{Fe}^{3+}$ ($\text{I}_2$ at $+0.54\text{ V}$ cannot!) |
| $\text{Cu}^{2+} + 2e^- \to \text{Cu}(s)$ | $+0.34$ | Reduced form ($\text{Cu}$) is more stable than $\text{H}_2(g)$ |
| $2\text{H}^+ + 2e^- \to \text{H}_2(g)$ (SHE) | $0.00$ | Zero reference point at all temperatures |
| $\text{Fe}^{2+} \to \text{Fe}$ / $\text{Zn}^{2+} \to \text{Zn}$ | $-0.44\ /\ -0.76$ | Negative $E^\circ \implies$ stronger reducing agent than $\text{H}^+/\text{H}_2$ |
| $\text{Al}^{3+}$ ($-1.66$), $\text{Mg}^{2+}$ ($-2.36$), $\text{Na}^+$ ($-2.71$) | $-1.66$ to $-2.71$ | Too reactive for carbon reduction — extracted by electrolysis |
| $\text{Li}^+ + e^- \to \text{Li}(s)$ | $-3.05$ | Strongest reducing agent ($\text{Li}$) in water; weakest oxidant ($\text{Li}^+$) |
Common Board & NEET/JEE Mistakes to Avoid (2.1–2.2)
- Anode vs Cathode Sign: Oxidation ALWAYS happens at the anode and reduction ALWAYS at the cathode. Only the electrical sign flips (Anode is $-$ in Galvanic, $+$ in Electrolytic).
- Copper in $\text{HNO}_3$ Trap: $\text{H}^+$ cannot oxidise $\text{Cu}$ because $E^\circ_{\text{Cu}^{2+}/\text{Cu}} = +0.34\text{ V} \gt 0$. In nitric acid, $\text{Cu}$ is oxidised by $\text{NO}_3^-$ ($+0.97\text{ V}$), NOT by $\text{H}^+$.
- Extra Uses of Electrochemical Cells (NCERT p. 36): Used to find pH, solubility product ($K_{sp}$), equilibrium constant ($K_c$), thermodynamic quantities, and for potentiometric titrations.
No! Zinc ($E^\circ = -0.76\text{ V}$) is more reactive (stronger reducing agent) than copper ($+0.34\text{ V}$).
So $\text{Zn}(s) + \text{Cu}^{2+}(aq) \to \text{Zn}^{2+}(aq) + \text{Cu}(s)$ happens spontaneously ($E^\circ_{\text{cell}} = +1.10\text{ V}$), dissolving zinc and creating holes in the pot.
Page 2 of 10 · Voltage & ThermodynamicsNCERT 2.3
NCERT Sections 2.3, 2.3.1 & 2.3.2 · Concentration, Equilibrium & Work
Nernst Equation, Equilibrium Constant ($K_c$) & Gibbs Energy ($\Delta_r G$)
Why Do We Need the Nernst Equation? (3 Simple Points)
- The Real-Life Problem: Standard $E^\circ$ only works when every ion is at exactly $1\text{ M}$ — which changes the moment a battery starts running!
- What Happens Over Time: Reactants get used up and products pile up, so cell voltage steadily falls until $E_{\text{cell}} = 0$ (the cell reaches equilibrium and dies).
- The 3 Big Equations of This Page: Nernst gives voltage at any concentration, setting $E_{\text{cell}} = 0$ gives $K_c$, and $\Delta_r G = -nFE_{\text{cell}}$ gives maximum electrical work.
Nernst Equation — Single Electrode & Complete Cell
NCERT Eqs. (2.8)–(2.13)Interactive Lab 2: Live Daniell Cell Voltmeter ($298\text{ K}$)
Slide $[\text{Zn}^{2+}]$ and $[\text{Cu}^{2+}]$ to watch live changes in $Q$, $E_{\text{cell}}$, and $\Delta_r G$.
Reaction Quotient $Q$
1.00
Gibbs Energy $\Delta_r G$
-212.3 kJ/mol
Standard state ($Q = 1$): $\log Q = 0$, so $E_{\text{cell}} = E^\circ_{\text{cell}} = 1.100\text{ V}$ and $\Delta_r G^\circ = -212.27\text{ kJ mol}^{-1}$.
Linking Cell Potential to $K_c$ and Gibbs Energy ($\Delta_r G$)
2.3.1 Equilibrium Constant ($K_c$)
NCERT Eq. (2.14)- At equilibrium: Voltmeter reads $E_{\text{cell}} = 0$ and $Q = K_c$.
- Daniell Cell ($n = 2, E^\circ = 1.1\text{ V}$): $\log K_c = \frac{1.1 \times 2}{0.059} = 37.288 \implies K_c = 2 \times 10^{37}$ at $298\text{ K}$!
2.3.2 Gibbs Energy & Reversible Work
NCERT Eqs. (2.15)–(2.16)- $E_{\text{cell}}$ is intensive: Doubling the equation does NOT double voltage.
- $\Delta_r G$ is extensive: Doubling $\text{Zn} + \text{Cu}^{2+}$ makes $n = 4$, so $\Delta_r G = -4FE_{\text{cell}}$!
Example 2.1 — Cell Representation & Nernst EMF for $\text{Mg} + 2\text{Ag}^+$
$E_{\text{cell}} = 3.17 - \frac{0.059}{2}\log\frac{0.130}{(0.0001)^2} = 3.17 - 0.21$
Example 2.2 — Equilibrium Constant $K_c$ of $\text{Cu} + 2\text{Ag}^+$
Example 2.3 — Standard Gibbs Energy $\Delta_r G^\circ$ of Daniell Cell
Top 3 Exam Traps in Section 2.3
- Don’t Forget Powers in $Q$: In $\text{Mg} + 2\text{Ag}^+ \to \text{Mg}^{2+} + 2\text{Ag}$, always square $[\text{Ag}^+]^2$ in the denominator!
- Shortcut for Hydrogen Electrode at Any pH (Intext 2.4): $E_{\text{H}^+/\text{H}_2} = -0.059 \times \text{pH}$. So at $\text{pH} = 10$, $E = -0.59\text{ V}$!
- Adding Half-Cells: Never add two $E^\circ$ values directly when their electron counts ($n$) differ — convert to $\Delta G^\circ = -nFE^\circ$ first, then add.
$E^\circ_{\text{cell}}$ stays $1.10\text{ V}$ (intensive property).
$\Delta_r G^\circ$ doubles from $-2FE^\circ_{\text{cell}}$ to $-4FE^\circ_{\text{cell}}$ ($-424.54\text{ kJ mol}^{-1}$) because $\Delta_r G^\circ$ is extensive and $n$ becomes $4$.
Page 3 of 10 · Ionic ConductionNCERT 2.4
NCERT Sections 2.4 & 2.4.1 · Resistivity, Conductivity & Wheatstone Bridge
Conductance of Electrolytic Solutions & Conductivity Cells
Simple Explanation (How Electricity Moves in Wires vs Solutions)
- In Metals (Electronic Conductance): Free electrons carry current; heating makes metal atoms vibrate more, so conductance drops.
- In Salt Solutions (Ionic Conductance): Swimming cations & anions carry current; heating lowers solvent thickness (viscosity), so conductance rises.
- How We Measure a Liquid’s Resistance: We hold the liquid in a conductivity cell ($G^* = l/A$) and use AC power (not DC!) on a Wheatstone bridge so the liquid does not electrolyse.
5 Core Formulas You Must Know ($R, G, \kappa, G^*, \Lambda_m$)
NCERT Eqs. (2.17)–(2.21)Differentiation: Metallic (Electronic) vs Electrolytic (Ionic) Conductance
| Basis of Difference | Electronic / Metallic Conductance | Electrolytic / Ionic Conductance |
|---|---|---|
| Charge Carriers | Electrons (metals, graphite, carbon-black, conducting polymers) | Ions (cations & anions in solution or molten salt) |
| Effect of Heating ($T \uparrow$) | Decreases as temperature rises | Increases as temperature rises |
| Chemical Change | No change in composition of the wire | Prolonged DC causes chemical change (electrolysis) |
| Depends On | (i) Nature & structure of metal, (ii) Valence electrons per atom, (iii) Temperature | (i) Nature of electrolyte, (ii) Ion size & solvation, (iii) Solvent viscosity, (iv) Concentration, (v) Temperature |
4 Classes of Materials (NCERT Table 2.2)
- Conductors: $\text{Ag}$ ($6.2\times 10^3$), $\text{Cu}$ ($5.9\times 10^3$), $\text{Au}$ ($4.5\times 10^3$), $\text{Na}$ ($2.1\times 10^3$), $\text{Fe}$ ($1.0\times 10^3$), Graphite ($1.2\times 10\text{ S m}^{-1}$).
- Semiconductors: $\text{Ge}$ ($2.0$), $\text{Si}$ ($1.5\times 10^{-2}$), $\text{CuO}$ ($1\times 10^{-7}$), doped $\text{Si}$, $\text{GaAs}$.
- Insulators: Glass ($10^{-16}$), Teflon ($10^{-18}\text{ S m}^{-1}$). Pure water ($\sim 10^{-7}\text{ M H}^+/\text{OH}^-$): $3.5\times 10^{-5}\text{ S m}^{-1}$.
- Superconductors: Zero resistivity ($\infty$ conductivity). Metals/alloys at $0\text{–}15\text{ K}$; ceramics & mixed oxides up to $150\text{ K}$!
Interesting NCERT Note: Conducting Polymers (p. 42)
- 1977 Discovery (Nobel Prize 2000): MacDiarmid, Heeger & Shirakawa found that polyacetylene exposed to $\text{I}_2$ vapours turns metallic and conducts electricity.
- Examples: Polyaniline, polypyrrole, polythiophene.
- Why They Matter: Much lighter than metals (light-weight batteries) and flexible like plastic (bendable transistors!).
NCERT Figs. 2.4 & 2.5: Measuring Resistance with an AC Wheatstone Bridge
Step-by-step method using a platinised Pt conductivity cell and $550\text{–}5000\text{ Hz}$ audio AC source.
3 Easy Steps to Measure $\kappa$ (Table 2.3)
- Step 1 (Balance Bridge, Eq. 2.19): Adjust $R_1$ until detector $P$ (headphone) has zero current: $R_2 = \frac{R_1 R_4}{R_3}$.
- Step 2 (Calibrate $G^*$ with $\text{KCl}$): Measuring $l$ and $A$ with a ruler is unreliable, so fill the cell with standard $\text{KCl}$ of known $\kappa$ to get $G^* = R\kappa$.
- Standard $\text{KCl}$ Values ($298.15\text{ K}$): $1.0\text{ M}$ ($\kappa = 11.13\text{ S m}^{-1}$), $0.1\text{ M}$ ($1.29$), $0.01\text{ M}$ ($0.141\text{ S m}^{-1}$).
- Step 3 (Find Unknown $\kappa$): Fill the same cell with your test solution, read $R$, and compute $\kappa = G^*/R$!
Example 2.4 — $0.1\text{ M KCl}$ ($100\ \Omega, \kappa = 1.29\text{ S m}^{-1}$) → $0.02\text{ M KCl}$ ($520\ \Omega$)
$\kappa_2 = \frac{129}{520} = 0.248\text{ S m}^{-1}$; $\Lambda_m = \frac{0.248}{20} = 124\times 10^{-4}\text{ S m}^2\text{ mol}^{-1}$
$\Lambda_m = 124\text{ S cm}^2\text{ mol}^{-1}$
Example 2.5 — $0.05\text{ M NaOH}$ Column ($d = 1\text{ cm}, l = 50\text{ cm}, R = 5.55 \times 10^3\ \Omega$)
$\kappa = \frac{1}{87.135} = 0.01148\text{ S cm}^{-1}$; $\Lambda_m = \frac{0.01148 \times 1000}{0.05}$
$\kappa = 0.01148\text{ S cm}^{-1}$
$\Lambda_m = 229.6\text{ S cm}^2\text{ mol}^{-1}$
Top 2 Exam Traps in Section 2.4
- Watch the $1000$ Factor: Use $\Lambda_m = \frac{\kappa \times 1000}{M}$ ONLY when $\kappa$ is in $\text{S cm}^{-1}$. If $\kappa$ is in $\text{S m}^{-1}$, divide by $1000 M$ instead!
- Diameter vs Radius (Example 2.5): Diameter $d = 1\text{ cm} \implies r = 0.5\text{ cm}$. Forgetting to halve $d$ gives a $4\times$ error in area $A = \pi r^2$!
Passing direct current (DC) causes electrolysis, which changes the chemical composition and ion concentration of the solution.
High-frequency AC flips direction rapidly so no net chemical reaction occurs at the platinised platinum electrodes.
Page 4 of 10 · Dilution & Weak ElectrolytesNCERT 2.4.2
NCERT Section 2.4.2 · Variation with Concentration & Kohlrausch Law
Why $\kappa$ Drops While $\Lambda_m$ Rises on Dilution
Simple Explanation (Board Exam Favourite!)
- Conductivity ($\kappa$) ALWAYS decreases on dilution: $\kappa$ measures the current carried by ions in just $1\text{ cm}^3$ of solution. Adding water spreads the ions apart, so fewer ions remain per unit volume.
- Molar Conductivity ($\Lambda_m$) ALWAYS increases on dilution: $\Lambda_m = \kappa V$ measures the conducting power of ALL ions produced by $1\text{ mol}$ of electrolyte. When you add water, the volume $V$ grows much faster than $\kappa$ drops — so $\Lambda_m$ goes UP!
- Limiting Molar Conductivity ($\Lambda_m^\circ$): The maximum value $\Lambda_m$ reaches when concentration approaches zero ($c \to 0$, infinite dilution).
Interactive Lab 3: $\Lambda_m$ vs $c^{1/2}$ Dilution Plotter (NCERT Fig. 2.6)
Slide concentration $c$ down toward $0$ and compare how $\text{KCl}$ (strong, solid line) differs from $\text{CH}_3\text{COOH}$ (weak, dashed steep curve).
$\text{KCl}$ (Strong) $\Lambda_m$
141.3 S cm²/mol
$\text{CH}_3\text{COOH}$ (Weak) $\Lambda_m$
16.2 S cm²/mol
Weak Dissociation $\alpha$
4.1%
$\sqrt{c}$ on x-axis
0.100
Notice how $\text{KCl}$ stays a gentle straight line (easy to extrapolate to $\Lambda_m^\circ = 150.0$), while $\text{CH}_3\text{COOH}$ shoots upward sharply as dilution increases $\alpha$!
Strong vs Weak Electrolytes (Differentiation Table)
| Property | Strong Electrolytes ($\text{KCl}, \text{NaCl}, \text{HCl}$) | Weak Electrolytes ($\text{CH}_3\text{COOH}, \text{NH}_4\text{OH}$) |
|---|---|---|
| Dissociation | Almost $100\%$ ionised even at moderate concentration. | Partially ionised ($\alpha \ll 1$); $\alpha$ rises sharply on dilution. |
| Why $\Lambda_m$ Rises | Only a slow linear rise because dilution reduces inter-ionic attraction, letting ions move freer. | Steep exponential-like rise near $c \to 0$ because both the number of ions ($\alpha$) and mobility surge! |
| Graph Equation | Debye–Hückel–Onsager: $\Lambda_m = \Lambda_m^\circ - A c^{1/2}$ (straight line, slope $= -A$). | Curve runs nearly parallel to the y-axis as $c \to 0$; cannot be extrapolated graphically. |
| How to Find $\Lambda_m^\circ$ | Direct graphical extrapolation to $c^{1/2} = 0$ (y-intercept). | Indirectly calculated using Kohlrausch’s Law of independent migration of ions! |
Kohlrausch’s Law, Degree of Dissociation ($\alpha$) & $K_a$
NCERT Eqs. 2.23–2.26Example 2.6 — Plot $\Lambda_m$ vs $c^{1/2}$ for $\text{KCl}$ in water at $298\text{ K}$
$A = 87.46\text{ S cm}^2\text{ mol}^{-1}/(\text{mol L}^{-1})^{1/2}$
Example 2.7 — $\Lambda_m^\circ$ for $\text{CaCl}_2$ and $\text{MgSO}_4$ using NCERT Table 2.4
$\Lambda_m^\circ(\text{MgSO}_4) = 106.0 + 160.0 = 266.0$
$\text{MgSO}_4 = 266\text{ S cm}^2\text{ mol}^{-1}$
Example 2.8 — Find $\Lambda_m^\circ(\text{HAc})$ from $\text{NaCl}, \text{HCl}, \text{NaAc}$
$= 425.9 + 91.0 - 126.4$
Example 2.9 — Dissociation Constant $K_a$ of $0.001028\text{ M}$ Acetic Acid
$\alpha = \frac{48.15}{390.5} = 0.1233 \implies K_a = \frac{0.001028 \times (0.1233)^2}{1 - 0.1233}$
$K_a = 1.78 \times 10^{-5}\text{ mol L}^{-1}$
Top 2 Exam Traps in Section 2.4.2
- Don’t Forget Stoichiometric Multipliers ($\nu_+, \nu_-$): For $\text{CaCl}_2$, you MUST multiply $\lambda^\circ(\text{Cl}^-)$ by $2$: $\Lambda_m^\circ(\text{CaCl}_2) = \lambda^\circ(\text{Ca}^{2+}) + 2\lambda^\circ(\text{Cl}^-)$.
- Keep $(1 - \alpha)$ in the Denominator of $K_a$: In Example 2.9, $\alpha = 0.1233$ ($12.3\%$) is NOT negligible! Dropping $(1-\alpha)$ gives a $14\%$ error.
Conductivity ($\kappa$) is the conductance of ions present in unit volume ($1\text{ cm}^3$ or $1\text{ m}^3$) of solution.
On dilution, the number of ions per unit volume decreases, so $\kappa$ always decreases for both strong and weak electrolytes.
Page 5 of 10 · Forced Reactions & PlatingNCERT 2.5
NCERT Section 2.5 & 2.5.1 · Electrolytic Cells, Faraday’s Laws & Products
Electrolysis, Faraday’s Quantitative Laws & Overpotential
Big Idea in 3 Simple Points
- How Electrolysis Works: An external DC battery pumps electrons into the cathode (now negative) for reduction and pulls electrons out of the anode (now positive) for oxidation.
- Industrial Extraction & Refining: Impure copper (anode) dissolves as $\text{Cu}^{2+}$ and deposits as pure copper on the cathode. Reactive metals $\text{Na}, \text{Mg}, \text{Al}$ are extracted by electrolysis of their molten salts (because no chemical reducing agent is strong enough).
- Faraday’s Rule of Counting Electrons: Every $1\text{ mol}$ of electrons carries a charge of $1\text{ Faraday} = 96487\text{ C mol}^{-1}$ ($\approx 96500\text{ C mol}^{-1}$).
Faraday’s First Law (1833–34)
- The amount of chemical reaction (mass $m$ deposited or liberated) at any electrode is directly proportional to the quantity of electricity $Q$ passed through the electrolyte:
- $m \propto Q = I \cdot t \implies m = Z I t$
- Using molar mass $M$ and electron count $n$: $m = \frac{M \cdot I \cdot t}{n \cdot F}$.
Faraday’s Second Law
- When the same quantity of electricity ($Q$) is passed through different electrolytic solutions connected in series, the masses of substances liberated are proportional to their chemical equivalent weights ($M / n$):
- $\frac{m_1}{m_2} = \frac{E_1}{E_2} = \frac{M_1/n_1}{M_2/n_2}$
- Example: $1\text{ F}$ deposits $1\text{ mol Ag}$ ($108\text{ g}$), $\frac{1}{2}\text{ mol Cu}$ ($31.5\text{ g}$), or $\frac{1}{3}\text{ mol Al}$ ($9\text{ g}$).
Faraday Stoichiometry Formulas
NCERT Eqs. 2.27–2.31Interactive Lab 4: Faraday Electroplating Simulator (Starts at NCERT Example 2.10)
Switch the metal ion ($\text{Ag}^+, \text{Cu}^{2+}, \text{Al}^{3+}$) and adjust current $I$ and time $t$ to watch the cathode coating thicken in real time.
Charge $Q = I \cdot t$
900 C
Moles of $e^-$ ($Q/F$)
0.00933 mol
Mass Deposited ($m$)
0.2938 g
Molar Mass / $n$
63 / 2 = 31.5
Example 2.10 — $\text{Cu}^{2+}(aq) + 2e^- \to \text{Cu}(s)$
$2\text{ F} = 2 \times 96487\text{ C}$ deposits $63\text{ g Cu}$
$m = \frac{63 \times 900}{2 \times 96487}$
2.5.1 Predicting Products of Electrolysis (Master Board Table)
When water is present, ions compete with $\text{H}_2\text{O}$. At the cathode, the reaction with the higher $E^\circ$ wins; at the anode, the reaction with the lower $E^\circ$ wins — except when overpotential slows $\text{O}_2$ formation!
| Electrolyte & Electrodes | Cathode Product (Reduction) | Anode Product (Oxidation) | Key NCERT Reason |
|---|---|---|---|
| Molten $\text{NaCl}$ (inert) | $\text{Na}(l)$ ($\text{Na}^+ + e^- \to \text{Na}$) | $\text{Cl}_2(g)$ ($2\text{Cl}^- \to \text{Cl}_2 + 2e^-$) | No water present, so only $\text{Na}^+$ and $\text{Cl}^-$ exist. |
| Aqueous $\text{NaCl}$ (inert) | $\text{H}_2(g)$ + $\text{OH}^-$ left in solution | $\text{Cl}_2(g)$ (NOT $\text{O}_2$!) | $\text{H}_2\text{O}$ beats $\text{Na}^+$ ($0.00 \gt -2.71\text{ V}$). At anode, $\text{O}_2$ needs extra overpotential, so $\text{Cl}^-$ oxidises instead! |
| Dilute $\text{H}_2\text{SO}_4$ (Pt) | $\text{H}_2(g)$ | $\text{O}_2(g)$ ($2\text{H}_2\text{O} \to \text{O}_2 + 4\text{H}^+ + 4e^-$) | Water oxidation ($+1.23\text{ V}$) is preferred over $\text{SO}_4^{2-}$ ($+1.96\text{ V}$). |
| Conc. $\text{H}_2\text{SO}_4$ (Pt) | $\text{H}_2(g)$ | $\text{S}_2\text{O}_8^{2-}$ (peroxodisulphate) | High $[\text{SO}_4^{2-}]$ favours $2\text{SO}_4^{2-} \to \text{S}_2\text{O}_8^{2-} + 2e^-$. |
| Aq. $\text{AgNO}_3$ (Ag vs Pt) | $\text{Ag}(s)$ deposits in both cases | Ag anode: Ag dissolves ($\text{Ag} \to \text{Ag}^+ + e^-$) Pt anode: $\text{O}_2(g)$ evolves |
Silver is an active electrode; platinum is an inert electrode. |
Top 2 Exam Traps in Section 2.5
- Overpotential Trap (Aqueous $\text{NaCl}$): On paper, $E^\circ(\text{O}_2/\text{H}_2\text{O}) = 1.23\text{ V}$ is lower than $E^\circ(\text{Cl}_2/\text{Cl}^-) = 1.36\text{ V}$. Yet $\text{Cl}_2$ is liberated at the anode because $\text{O}_2$ formation is kinetically slow and requires extra overpotential.
- Don’t Leave Time in Minutes or Hours: Always multiply minutes by $60$ and hours by $3600$ before computing $Q = I \cdot t$.
Balanced half-reaction: $\text{Cr}_2\text{O}_7^{2-} + 14\text{H}^+ + \mathbf{6e^-} \to 2\text{Cr}^{3+} + 7\text{H}_2\text{O}$.
Each Cr drops from $+6 \to +3$ (change $= 3$, times $2$ Cr atoms $= \mathbf{6\text{ F}}$).
Charge $= 6 \times 96487\text{ C} = \mathbf{578{,}922\text{ C}}$ (or $5.79 \times 10^5\text{ C}$).
Page 6 of 10 · Commercial CellsNCERT 2.6
NCERT Sections 2.6.1 & 2.6.2 · Batteries in Everyday Life
Primary (One-Time) & Secondary (Rechargeable) Batteries
Simple Explanation — What Makes a Good Battery?
- A battery is one or more galvanic cells connected in series to convert chemical energy into electrical energy.
- A good commercial battery should be reasonably light, compact, and keep a steady voltage while you use it.
- Primary vs Secondary: Primary batteries work only once and go dead (cannot be recharged). Secondary batteries can be recharged by passing current in the opposite direction!
| Feature | Primary Batteries (Sec. 2.6.1) | Secondary Batteries (Sec. 2.6.2) |
|---|---|---|
| Reversibility | Reaction occurs only once; becomes dead after use. | Reversible! Recharged by external current passing in reverse. |
| NCERT Examples | Dry Cell (Leclanché), Mercury Cell (Button Cell). | Lead Storage Battery (cars/inverters), Nickel–Cadmium (Ni-Cd) Cell. |
4 Commercial Batteries at a Glance (NCERT Figs. 2.8–2.11)
1. Dry Cell / Leclanché Cell (Fig. 2.8 · $\approx 1.5\text{ V}$)
- Uses: Transistors and wall clocks.
- Anode ($-$): Zinc container ($\text{Zn} \to \text{Zn}^{2+} + 2e^-$).
- Cathode ($+$): Carbon (graphite) rod surrounded by powdered $\text{MnO}_2 + \text{C}$; moist paste of $\text{NH}_4\text{Cl} + \text{ZnCl}_2$ fills the space.
- Cathode Reaction: $\text{MnO}_2 + \text{NH}_4^+ + e^- \to \text{MnO(OH)} + \text{NH}_3$ ($\text{Mn}$ reduces $+4 \to +3$).
- Key NCERT Fact: $\text{NH}_3$ gas does not build pressure because it forms complex $[\text{Zn}(\text{NH}_3)_4]^{2+}$ with $\text{Zn}^{2+}$.
2. Mercury Cell (Fig. 2.9 · Constant $1.35\text{ V}$)
- Uses: Low-current devices like hearing aids and wristwatches.
- Anode ($-$): Zinc–mercury amalgam ($\text{Zn(Hg)}$).
- Cathode ($+$): Paste of $\text{HgO}$ and carbon; electrolyte is moist $\text{KOH} + \text{ZnO}$.
- Why Voltage Stays Constant ($1.35\text{ V}$): Overall reaction $\text{Zn(Hg)} + \text{HgO}(s) \to \text{ZnO}(s) + \text{Hg}(l)$ involves no ion in solution whose concentration can change!
3. Lead Storage Battery (Fig. 2.10 · Secondary)
- Uses: Automobiles and home inverters.
- Anode ($-$): Lead ($\text{Pb}$) grid.
- Cathode ($+$): Grid of lead packed with lead dioxide ($\text{PbO}_2$).
- Electrolyte: $38\%$ solution of sulphuric acid ($\text{H}_2\text{SO}_4$).
- On Charging: Reverse the reaction — $\text{PbSO}_4(s)$ on both plates converts back to $\text{Pb}$ and $\text{PbO}_2$!
4. Nickel–Cadmium (Ni-Cd) Cell (Fig. 2.11 · Secondary)
- Advantage: Longer life than lead storage cell.
- Limitation: More expensive to manufacture than lead storage batteries.
- Overall Discharge Reaction (NCERT Eq. 2.40):
$\text{Cd}(s) + 2\text{Ni(OH)}_3(s) \to \text{CdO}(s) + 2\text{Ni(OH)}_2(s) + \text{H}_2\text{O}(l)$
Exact Half-Cell Reactions to Memorize (Board 3-Mark Favourite)
NCERT Eqs. 2.34–2.39Its overall reaction is $\text{Zn(Hg)} + \text{HgO}(s) \to \text{ZnO}(s) + \text{Hg}(l)$, which contains only pure solids and liquid mercury.
Because no ion in solution appears in the overall reaction, concentration never changes during discharge — so $E_{\text{cell}}$ stays fixed at $1.35\text{ V}$!
Page 7 of 10 · Clean EnergyNCERT 2.7
NCERT Section 2.7 & Hydrogen Economy Box (p. 58)
Fuel Cells ($\text{H}_2\text{–O}_2$) & The Hydrogen Economy
Simple Explanation — Why Are Fuel Cells Better Than Power Plants?
- Direct Energy Conversion: Thermal power plants burn fuel to boil water into steam to spin turbines (only $\sim 40\%$ efficient and very polluting). Fuel cells convert combustion energy of $\text{H}_2, \text{CH}_4,$ or $\text{CH}_3\text{OH}$ directly into electricity at $\sim 70\%$ efficiency!
- Never Runs Dead: Unlike regular batteries, a fuel cell works continuously as long as reactants ($\text{H}_2$ and $\text{O}_2$) are supplied.
- Apollo Space Programme: Used the $\text{H}_2\text{–O}_2$ fuel cell for electrical power, AND the water vapour produced was condensed and added to the astronauts’ drinking water supply!
NCERT Fig. 2.12: $\text{H}_2\text{–O}_2$ Fuel Cell (Porous Carbon Electrodes + $\text{Pt/Pd}$ Catalyst)
Hydrogen and oxygen bubble through porous carbon electrodes into concentrated aqueous $\text{NaOH}$ to produce electricity and pure water.
Fuel Cell Reactions (NCERT Eqs. 2.41–2.43)
Catalysts: Finely divided platinum ($\text{Pt}$) or palladium ($\text{Pd}$) incorporated into porous carbon speed up electrode reactions.
NCERT Box (Page 58): The Hydrogen Economy & Climate Warning
- Why Fossil Fuels Are Risky: Burning coal/oil emits $\text{CO}_2$, causing the Greenhouse Effect, rising earth temperatures, melting polar ice, and rising ocean levels that threaten low-lying islands like the Maldives.
- Hydrogen as Future Fuel: Using renewable solar energy to split water produces clean $\text{H}_2$, whose combustion in fuel cells emits ONLY water — zero carbon pollution!
- Electrochemical Foundation: Both producing $\text{H}_2$ (water electrolysis) and using it (fuel cells) are core applications of electrochemistry.
Methane ($\text{CH}_4$) and methanol ($\text{CH}_3\text{OH}$) are directly listed in NCERT Section 2.7 as alternative fuels for fuel cells.
Page 8 of 10 · Corrosion ChemistryNCERT 2.8
NCERT Section 2.8 · Electrochemical Mechanism of Rusting
Corrosion, Rusting of Iron & Sacrificial Prevention
Simple Explanation — Rusting Is a Tiny Unwanted Galvanic Cell!
- What Corrosion Does: Slowly coats metallic surfaces with oxides or salts — rusting of iron, tarnishing of silver, and green coating on copper/bronze.
- Why Moisture + Acidic Air Speeds It Up: A single drop of water containing dissolved $\text{CO}_2$ (forming $\text{H}_2\text{CO}_3 \to \text{H}^+$) turns the surface of an iron sheet into an electrochemical cell with $E_{\text{cell}}^\circ = +1.67\text{ V}$!
NCERT Fig. 2.13: Electrochemical Rusting of Iron in a Water Droplet
One spot on the iron acts as the Anode (dissolves $\text{Fe} \to \text{Fe}^{2+}$), while another spot exposed to air acts as the Cathode (reduces $\text{O}_2$).
3-Step Mechanism of Rusting
- Anode (Oxidation): Iron loses electrons at one spot:
$2\text{Fe}(s) \to 2\text{Fe}^{2+} + 4e^-$ ($E^\circ = -0.44\text{ V}$). - Cathode (Reduction): Electrons travel through the metal to another spot and reduce $\text{O}_2$ in presence of $\text{H}^+$ (from $\text{H}_2\text{CO}_3$):
$\text{O}_2(g) + 4\text{H}^+(aq) + 4e^- \to 2\text{H}_2\text{O}(l)$ ($E^\circ = 1.23\text{ V}$). - Atmospheric Oxidation to Rust: $\text{Fe}^{2+}$ ions are further oxidised by air to $\text{Fe}^{3+}$ (hydrated ferric oxide rust $\text{Fe}_2\text{O}_3 \cdot x\text{H}_2\text{O}$), regenerating $\text{H}^+$ to keep rusting going!
Overall Rusting Cell Reaction & Standard EMF
NCERT Section 2.83 NCERT Methods to Prevent Corrosion
1. Barrier Protection
Cover iron with paint or special protective chemicals like bisphenol so oxygen and moisture cannot touch the metal surface.
2. Inert / Metal Coating
Coat iron with other metals such as tin ($\text{Sn}$) or zinc ($\text{Zn}$, galvanisation) to seal the surface or react preferentially.
3. Sacrificial Protection
Connect iron to a more reactive metal block ($\text{Mg}$ or $\text{Zn}$). The sacrificial electrode oxidises instead of iron, saving the iron structure!
On a moist iron surface, dissolved $\text{CO}_2$ supplies $\text{H}^+$ ions. One spot acts as the anode ($2\text{Fe} \to 2\text{Fe}^{2+} + 4e^-$) and another spot acts as the cathode ($\text{O}_2 + 4\text{H}^+ + 4e^- \to 2\text{H}_2\text{O}$), creating a spontaneous galvanic cell ($E^\circ = 1.67\text{ V}$) whose $\text{Fe}^{2+}$ oxidises in air to rust ($\text{Fe}_2\text{O}_3 \cdot x\text{H}_2\text{O}$).
Page 9 of 10 · Active Recall LabExam Practice
Active Recall · NCERT Intext Bank (2.1–2.15) & Board Quiz
Formula Flip-Cards, 5-Question Quiz & Complete Intext Bank
1. Tap-to-Flip Formula Cheat-Cards (6 Core Formulas)
Tap any card to flip between the NCERT formula and its exact units + exam trap.
2. 5-Question Rapid-Fire NCERT Mastery Check
Q1. What happens to a Daniell cell ($E^\circ = 1.1\text{ V}$) when an external opposing potential $E_{\text{ext}} \gt 1.1\text{ V}$ is applied?
Explanation: When $E_{\text{ext}} \gt 1.1\text{ V}$, the reaction reverses completely (NCERT Fig. 2.2c): electrons are pushed from Cu to Zn, copper dissolves at the anode and zinc deposits at the cathode.
Q2. When an electrolyte solution is diluted with water, how do conductivity ($\kappa$) and molar conductivity ($\Lambda_m$) change?
Explanation: Fewer ions remain per unit volume so $\kappa$ always decreases, whereas total volume $V$ containing $1\text{ mol}$ expands rapidly so $\Lambda_m = \kappa V$ always increases.
Q3. During electrolysis of aqueous $\text{NaCl}$ using inert platinum electrodes, which gas is liberated at the anode?
Explanation: Even though $E^\circ(\text{O}_2/\text{H}_2\text{O}) = 1.23\text{ V} \lt 1.36\text{ V}$, oxygen evolution is kinetically slow and needs extra overpotential, so $\text{Cl}_2(g)$ is preferred at the anode.
Q4. Why does a mercury button cell deliver a remarkably constant $1.35\text{ V}$ throughout its working life?
Explanation: $\text{Zn(Hg)} + \text{HgO}(s) \to \text{ZnO}(s) + \text{Hg}(l)$ has only pure solids and liquid mercury — no aqueous ions appear in the reaction quotient $Q$!
Q5. Which metal ions from Table 2.1 make the strongest oxidising agent and strongest reducing agent respectively?
Explanation: Highest positive $E^\circ$ ($+2.87\text{ V}$) makes $\text{F}_2$ the strongest oxidising agent; most negative $E^\circ$ ($-3.05\text{ V}$) makes $\text{Li}$ metal the strongest reducing agent in aqueous solution.
3. Complete NCERT Intext Questions Bank (2.1 – 2.15)
Every single Intext question from NCERT Unit 2 with verified answers (NCERT p. 60).
4. Night-Before-Exam Revision Checklist
Page 10 of 10 · Final Revision SheetNCERT pp. 58–59
Complete One-Page NCERT Summary · Must-Memorize Constants & Glossary
Chapter 2: Electrochemistry — Master Revision Sheet
Official NCERT Chapter Summary (Distilled into 4 Crystal-Clear Points)
- An electrochemical cell has two metallic electrodes dipped in electrolyte(s): Galvanic cells convert chemical energy into electrical energy (spontaneous, $\Delta_r G \lt 0$); Electrolytic cells use electrical energy to drive non-spontaneous reactions.
- Standard electrode potentials ($E^\circ$) are measured against SHE ($0.00\text{ V}$). Cell EMF ($E_{\text{cell}}^\circ = E_R^\circ - E_L^\circ$) links directly to $\Delta_r G^\circ = -nFE^\circ$ and equilibrium constant $K_c$.
- Ionic conductance is measured with an AC Wheatstone bridge. On dilution, $\kappa$ decreases while $\Lambda_m$ increases; Kohlrausch’s law gives $\Lambda_m^\circ$ and $K_a$ for weak electrolytes.
- Faraday’s laws quantify electrolysis ($m = MIt/nF$). Commercial batteries, fuel cells, and metallic corrosion are all direct real-world applications of electrochemical cells.
Section-by-Section Rapid Recap
2.1–2.2 Galvanic Cells, Daniell & SHE
- LOAN: Left = Oxidation = Anode = Negative. Double vertical bar ($\parallel$) = salt bridge.
- Daniell cell ($E^\circ = 1.1\text{ V}$): $E_{\text{ext}} \lt 1.1$ (Galvanic), $= 1.1$ (stops), $\gt 1.1$ (Electrolytic reverse).
- SHE $= 0.00\text{ V}$ at all $T$. Strongest oxidiser: $\text{F}_2$ ($+2.87\text{ V}$); strongest reducer: $\text{Li}$ ($-3.05\text{ V}$).
2.3 Nernst Equation, $K_c$ & $\Delta_r G$
- $E_{\text{cell}} = E_{\text{cell}}^\circ - \frac{0.059}{n}\log Q$ at $298\text{ K}$ (omit pure solids/liquids from $Q$).
- At equilibrium ($E_{\text{cell}} = 0$): $E_{\text{cell}}^\circ = \frac{0.059}{n}\log K_c$ (Daniell $K_c = 2 \times 10^{37}$).
- $\Delta_r G^\circ = -nFE_{\text{cell}}^\circ$ is extensive (scales with $n$), whereas $E^\circ$ is intensive!
2.4 Conductance & AC Bridge
- $G = 1/R$, $\kappa = G \cdot G^*$ where cell constant $G^* = l/A$ (calibrated via $\text{KCl}$).
- $\Lambda_m = \frac{\kappa \times 1000}{M}$ ($\text{S cm}^2\text{ mol}^{-1}$). Metallic $G \downarrow$ with $T$; Electrolytic $G \uparrow$ with $T$.
- Use AC ($550\text{–}5000\text{ Hz}$) in Wheatstone bridge to prevent electrolysis.
2.4.2 Dilution Curves & Kohlrausch
- Dilution: $\kappa$ always drops; $\Lambda_m$ rises gently for strong ($\Lambda_m = \Lambda_m^\circ - Ac^{1/2}$) and steeply for weak.
- Kohlrausch: $\Lambda_m^\circ = \nu_+ \lambda_+^\circ + \nu_- \lambda_-^\circ$ (finds $\Lambda_m^\circ$ of weak acids like $\text{HAc} = 390.5$).
- $\alpha = \Lambda_m / \Lambda_m^\circ$ and $K_a = \frac{c\alpha^2}{1-\alpha}$ (keep $1-\alpha$!).
2.5 Electrolysis & Faraday’s Laws
- $Q = It$, $1\text{ F} = 96487\text{ C mol}^{-1}$, $m = MIt/(nF)$. Always convert $t$ to seconds.
- Aq. $\text{NaCl}$ (inert): $\text{H}_2$ at cathode, $\text{Cl}_2$ at anode (due to $\text{O}_2$ overpotential).
- Dilute $\text{H}_2\text{SO}_4 \to \text{O}_2$ at anode; Conc. $\text{H}_2\text{SO}_4 \to \text{S}_2\text{O}_8^{2-}$ at anode.
2.6–2.8 Batteries, Fuel Cells & Corrosion
- Primary: Dry cell ($\approx 1.5\text{ V}$), Mercury cell ($1.35\text{ V}$ constant — no aqueous ion in overall eq.).
- Secondary: Lead storage ($38\%\ \text{H}_2\text{SO}_4$), Ni-Cd ($\text{Cd} + 2\text{Ni(OH)}_3 \to \text{CdO} + 2\text{Ni(OH)}_2 + \text{H}_2\text{O}$).
- $\text{H}_2\text{–O}_2$ fuel cell ($\sim 70\%$, Apollo). Rusting: $E^\circ = 1.67\text{ V}$, $\text{Fe}_2\text{O}_3\cdot x\text{H}_2\text{O}$, prevented by paint/$\text{Zn}/\text{Mg}$.
Must-Memorize NCERT Constants & Benchmarks
Key Electrochemistry Glossary (12 Board Terms)
High-Frequency Electrochemistry Board Repeats
Authentic question patterns appearing repeatedly in past CBSE board examinations.
Authentic Electrochemistry Board Questions
Strict past CBSE questions with official step marking schemes.
💡 View Step-Wise Marking Solution
Solution (a)
Step 1 (Formula / Governing Law & Given Data): [1 Mark]
The cell reaction is: $\text{Mg(s)} + 2\text{Ag}^+(aq) \rightarrow \text{Mg}^{2+}(aq) + 2\text{Ag(s)}$
Number of electrons transferred ($n$) = 2. Standard cell potential is given by:
$$E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} = 0.80 - (-2.37) = 3.17 \text{ V}$$Nernst Equation: $E_{\text{cell}} = E^\circ_{\text{cell}} - \frac{0.0591}{n} \log \frac{[\text{Mg}^{2+}]}{[\text{Ag}^+]^2}$
Step 2 (Step-by-Step Mathematical Working): [3 Marks]
Substituting the values:
$$E_{\text{cell}} = 3.17 - \frac{0.0591}{2} \log \frac{0.01}{(0.001)^2}$$ $$E_{\text{cell}} = 3.17 - 0.02955 \log \frac{10^{-2}}{10^{-6}} = 3.17 - 0.02955 \log(10^4)$$ $$E_{\text{cell}} = 3.17 - 0.02955 \times 4 = 3.17 - 0.1182 = 3.0518 \text{ V}$$For Gibbs Free Energy ($\Delta G$):
$$\Delta G = -nFE_{\text{cell}} = -2 \times 96500 \times 3.0518$$Step 3 (Final Concluded Answer): [1 Mark]
$E_{\text{cell}} \approx 3.05 \text{ V}$
$\Delta G \approx -588997.4 \text{ J mol}^{-1} \text{ or } -589 \text{ kJ mol}^{-1}$
Solution (b)
Step 1 (Formula / Governing Law & Given Data): [1 Mark]
Relation between $\Delta G^\circ$ and $E^\circ_{\text{cell}}$: $\Delta G^\circ = -nFE^\circ_{\text{cell}}$
$$E^\circ_{\text{cell}} = \frac{-\Delta G^\circ}{nF} = \frac{-(-43500)}{2 \times 96500} = 0.225 \text{ V}$$Reaction quotient ($Q$): $Q = \frac{[\text{H}^+]^2 [\text{Cl}^-]^2}{P_{\text{H}_2}} = \frac{(0.1)^2 (0.2)^2}{0.4} = \frac{0.01 \times 0.04}{0.4} = 0.001 = 10^{-3}$
Step 2 (Step-by-Step Mathematical Working): [3 Marks]
Using Nernst Equation:
$$E_{\text{cell}} = E^\circ_{\text{cell}} - \frac{0.0591}{n} \log Q$$ $$💡 Solution Queued for Verification
💡 Solution Queued for Verification
💡 View Step-Wise Marking Solution
Solution (A)
(a) Molar Conductivity and Degree of Dissociation
Step 1 (Formula & Given Data): [1 Mark]
- Given: $\kappa = 1.06 \times 10^{-2} \text{ S cm}^{-1}$, $C = 0.1 \text{ mol L}^{-1} = 0.1 \times 10^{-3} \text{ mol cm}^{-3}$
- Formula for Molar Conductivity: $\Lambda_m = \frac{\kappa \times 1000}{M}$
- Formula for Limiting Molar Conductivity: $\Lambda_m^\circ = \lambda^\circ_{\text{Na}^+} + \lambda^\circ_{\text{Cl}^-}$
Step 2 (Mathematical Working): [1 Mark]
Calculation of $\Lambda_m$:
$$\Lambda_m = \frac{1.06 \times 10^{-2} \text{ S cm}^{-1} \times 1000 \text{ cm}^3 \text{ L}^{-1}}{0.1 \text{ mol L}^{-1}} = 106 \text{ S cm}^2 \text{ mol}^{-1}$$Calculation of $\Lambda_m^\circ$:
$$\Lambda_m^\circ = 50.1 + 76.5 = 126.6 \text{ S cm}^2 \text{ mol}^{-1}$$Calculation of Degree of Dissociation ($\alpha$):
$$\alpha = \frac{\Lambda_m}{\Lambda_m^\circ} = \frac{106}{126.6} \approx 0.837$$Step 3 (Final Answer): [0.5 Mark]
$\Lambda_m = 106 \text{ S cm}^2 \text{ mol}^{-1}$ and $\alpha = 0.837$ (or $83.7\%$).
(b) Galvanic Cell Concepts
(i) Direction of current: [0.5 Mark]
Current flows from the cathode (Ag electrode) to the anode (Zn electrode) in the external circuit.
(ii) Primary vs Secondary Battery: [2 Marks]
- Primary Battery: The cell reaction occurs only once; the battery becomes dead after use and cannot be recharged (e.g., Dry cell).
- Secondary Battery: The cell reaction can be reversed by passing an external current, allowing the battery to be recharged and used multiple times (e.g., Lead storage battery).
Solution (B)
(a) Conductivity and Molar Conductivity
Step 1 (Formula & Given Data): [1 Mark]
- Cell constant ($G^*$) = $\kappa \times R = 1.29 \times 10^{-2} \text{ S cm}^{-1} \times 100 \text{ }\Omega = 1.29 \text{ cm}^{-1}$
- Conductivity ($\kappa$) = $\frac{G^*}{R_2} = \frac{1.29}{300}$
Step 2 (Mathematical Working): [1.5 Marks]
Calculation of $\kappa$:
$$\kappa = 4.3 \times 10^{-3} \text{ S cm}^{-1}$$Calculation of $\Lambda_m$:
$$\Lambda_m = \frac{\kappa \