← Chemistry Notes 🔷
Chapter 4: The d- and f-Block Elements CBSE Class 12 Chemistry (7 Marks)
❮ Prev: Chemical Kinetics Next: Coordination Compounds ➔ ⚡ 247 Chapter PYQs

CBSE Class 12 Chemistry NCERT Unit 4 (Complete Edition) All 11 NCERT Tables & Diagrams ~45 min read

Chapter 4: The $d$- and $f$-Block Elements

From iron in bridges and copper in wiring to brilliant coloured ions, powerhouse volumetric oxidants ($\text{K}_2\text{Cr}_2\text{O}_7$, $\text{KMnO}_4$), and nuclear energy elements ($\text{Th}, \text{Pa}, \text{U}$) — partly filled $d$ and $f$ orbitals explain every single trend in this chapter!

1. Complete $d$-Block Trends (4.1–4.3) All 4 series ($3d, 4d, 5d, 6d$), lattice structures, full Table 4.2 & 4.4 data, halides, oxides, magnetism, colour, catalysis, interstitials, and alloys.
2. $\text{K}_2\text{Cr}_2\text{O}_7$ & $\text{KMnO}_4$ Mastery (4.4) Complete industrial/lab preps, structural diagrams ($\text{Cr}_2\text{O}_7^{2-}, \text{MnO}_4^{2-}, \text{MnO}_4^-$), pH switches, and all 9 balanced redox equations.
3. Full $f$-Block Coverage (4.5–4.7) Complete Tables 4.9, 4.10 & 4.11 for every Lanthanoid and Actinoid, contraction effects, Fig. 4.7 reaction wheel, mischmetall, and industrial uses.

Chapter 4 Visual Roadmap — Pick Any Topic

Jump to Final NCERT Summary Page ↓

Page 1 of 8 · FoundationsNCERT 4.1 & 4.2

4.1

NCERT Sections 4.1 & 4.2 · Complete Table 4.1 (All 4 Series)

Position in Periodic Table & Electronic Configurations of $d$-Block

Big Idea in 3 Simple Points (Read This First!)

  • Where They Sit: The $d$-block (Groups 3–12) occupies the middle bridge between $s$- and $p$-blocks where penultimate $(n-1)d$ orbitals fill across four long periods ($3d, 4d, 5d, 6d$). The $f$-block sits separately at the bottom ($4f$ Lanthanoids & $5f$ Actinoids).
  • IUPAC Definition of a Transition Metal: A metal that has an incompletely filled $d$ subshell ($d^1$ to $d^9$) either in its ground-state neutral atom OR in any of its common oxidation states.
  • Why $\text{Zn}, \text{Cd}, \text{Hg}, \text{Cn}$ Are NOT Transition Metals: They have completely filled $(n-1)d^{10}$ orbitals both in their neutral atom ($(n-1)d^{10}ns^2$) and in their common $+2$ ions ($\text{Zn}^{2+} = 3d^{10}$). By contrast, $\text{Cu}$ ($3d^{10}4s^1$) and $\text{Ag}$ ($4d^{10}5s^1$) ARE transition metals because $\text{Cu}^{2+}$ ($3d^9$) and $\text{Ag}^{2+}$ ($4d^9$) have incomplete $d$ subshells!

Unit 4 Study Objectives

  • Locate all four $d$-block series & two $f$-block series
  • Write ground-state & ionic configurations (including every exception)
  • Explain trends in lattices, M.P., $\Delta_a H^\circ$, radii, density & IE
  • Relate oxidation-state stability to $E^\circ$ values, halides & oxides
  • Master prep, structures & redox reactions of $\text{K}_2\text{Cr}_2\text{O}_7$ & $\text{KMnO}_4$
  • Compare Lanthanoids ($4f$) & Actinoids ($5f$) thoroughly + industrial uses

1. Why $d$-Block Elements Are Special (4.1 & 4.2)

  • Peripheral Protrusion of $d$ Orbitals: Unlike inner $s$ and $p$ orbitals, $(n-1)d$ orbitals protrude toward the surface of the atom → strongly influenced by surrounding ligands and able to bond with them (leading to variable oxidation states, coloured ions, paramagnetism, complex formation, and catalysis).
  • Horizontal vs Vertical Similarity: Unlike $s/p$-block elements (where group/vertical similarities dominate), transition elements show greater similarity across a horizontal row (especially $3d$), though vertical group similarities also exist.
  • General Outer Configuration: $(n-1)d^{1\text{–}10}ns^{1\text{–}2}$ — the ONLY element with $ns^0$ is Palladium ($\text{Pd}, Z=46: 4d^{10}5s^0$)! Exceptions occur because the energy gap between $(n-1)d$ and $ns$ is tiny, and half-filled ($d^5$) or completely filled ($d^{10}$) configurations carry extra exchange-energy stability.
  • Cation Formation Rule: Outermost $ns$ electrons are ALWAYS removed first before $(n-1)d$ electrons!

2. Complete Ground-State Outer Configurations of All 4 Series (NCERT Table 4.1)

Anomalies where an electron shifts from $ns$ into $(n-1)d$ are highlighted in bold.

1st Transition Series ($3d$: $\text{Sc}$ to $\text{Zn}$)

Element$\text{Sc}$$\text{Ti}$$\text{V}$$\text{Cr}$*$\text{Mn}$$\text{Fe}$$\text{Co}$$\text{Ni}$$\text{Cu}$*$\text{Zn}$
$Z$21222324252627282930
$4s$2221222212
$3d$123556781010

2nd Transition Series ($4d$: $\text{Y}$ to $\text{Cd}$)

Element$\text{Y}$$\text{Zr}$$\text{Nb}$*$\text{Mo}$*$\text{Tc}$*$\text{Ru}$*$\text{Rh}$*$\text{Pd}$**$\text{Ag}$*$\text{Cd}$
$Z$39404142434445464748
$5s$2211111012
$4d$1245678101010

3rd Transition Series ($5d$: $\text{La}$ and $\text{Hf}$ to $\text{Hg}$)

Element$\text{La}$$\text{Hf}$$\text{Ta}$$\text{W}$$\text{Re}$$\text{Os}$$\text{Ir}$$\text{Pt}$*$\text{Au}$*$\text{Hg}$
$Z$57727374757677787980
$6s$2222222112
$5d$123456791010

4th Transition Series ($6d$: $\text{Ac}$ and $\text{Rf}$ to $\text{Cn}$)

Element$\text{Ac}$$\text{Rf}$$\text{Db}$$\text{Sg}$$\text{Bh}$$\text{Hs}$$\text{Mt}$$\text{Ds}$$\text{Rg}$*$\text{Cn}$
$Z$89104105106107108109110111112
$7s$2222222212
$6d$123456781010

Scandium ($\text{Sc}, Z=21$) possesses an incompletely filled $3d^1$ subshell in its ground state ($[\text{Ar}]\,3d^1 4s^2$), making it a transition element. Zinc ($\text{Zn}, Z=30$) has completely filled $3d^{10}$ orbitals in both its ground state ($3d^{10} 4s^2$) and its common oxidised state ($\text{Zn}^{2+}: 3d^{10}$), so it is excluded from transition metals.

Silver exhibits a $+2$ oxidation state (e.g., $\text{AgF}_2$), in which $\text{Ag}^{2+}$ has an incompletely filled $4d^9$ subshell. Under the IUPAC definition, having incomplete $d$ orbitals in a common ion qualifies it as a transition element!

Page 2 of 8 · Physical & Atomic TrendsNCERT 4.3.1–4.3.3

4.3

NCERT Sections 4.3.1–4.3.3 · Lattice Table, Figs. 4.1–4.3 & Full Table 4.2

Physical Properties, Crystal Lattices, Sizes & Ionisation Enthalpies

Big Idea in 3 Simple Points

  • More Unpaired $d$ Electrons = Stronger Metallic Glue: High melting points, hardness, low volatility, and high enthalpies of atomisation arise because both $(n-1)d$ and $ns$ electrons join in metallic bonding — peaking near $d^5$ (with dips at $\text{Mn}, \text{Tc}$) and plummeting at $\text{Zn}, \text{Cd}, \text{Hg}$!
  • Why $4d$ & $5d$ Atoms Have Virtually Identical Radii: Filling fourteen $4f$ electrons before $5d$ causes Lanthanoid Contraction (poor $4f$ shielding), cancelling the expected shell jump so $\text{Zr}\ (160\text{ pm}) \approx \text{Hf}\ (159\text{ pm})$!
  • Exchange Energy Controls IE Breaks: Removing an electron from a stable $d^5$ or $d^{10}$ ion costs extra energy ($\Delta_i H_2$ spikes at $\text{Cr}, \text{Cu}$; $\Delta_i H_3$ spikes at $\text{Mn}, \text{Zn}$), whereas forming $d^5$ ($\text{Mn}^{2+}, \text{Fe}^{3+}$) causes sharp dips!

1. Metallic Properties & Crystal Lattice Structures (4.3.1 & NCERT Lattice Table)

Transition metals show high tensile strength, ductility, malleability, metallic lustre, and thermal/electrical conductivity. Except $\text{Zn}, \text{Cd}, \text{Hg}, \text{Mn}$ (marked X), all adopt standard close-packed or bcc metallic lattices at normal temperature (alternative high-T structures shown in parentheses):

SeriesG3G4G5G6G7G8G9G10G11G12
$3d$ $\text{Sc}$
hcp (bcc)
$\text{Ti}$
hcp (bcc)
$\text{V}$
bcc
$\text{Cr}$
bcc
$\text{Mn}$
X (bcc,ccp)
$\text{Fe}$
bcc (hcp)
$\text{Co}$
ccp (hcp)
$\text{Ni}$
ccp
$\text{Cu}$
ccp
$\text{Zn}$
X (hcp)
$4d$ $\text{Y}$
hcp (bcc)
$\text{Zr}$
hcp (bcc)
$\text{Nb}$
bcc
$\text{Mo}$
bcc
$\text{Tc}$
hcp
$\text{Ru}$
hcp
$\text{Rh}$
ccp
$\text{Pd}$
ccp
$\text{Ag}$
ccp
$\text{Cd}$
X (hcp)
$5d$ $\text{La}$
hcp (ccp,bcc)
$\text{Hf}$
hcp (bcc)
$\text{Ta}$
bcc
$\text{W}$
bcc
$\text{Re}$
hcp
$\text{Os}$
hcp
$\text{Ir}$
ccp
$\text{Pt}$
ccp
$\text{Au}$
ccp
$\text{Hg}$
X

Key: bcc = body-centred cubic; hcp = hexagonal close packed; ccp = cubic close packed; X = atypical metal structure.

  • Melting Points (Fig. 4.1): Rise to a peak at $d^5$/mid-series ($\text{Cr}$ in $3d$, $\text{Mo}$ in $4d$, Tungsten $\text{W}$ highest overall in $5d$ at $\gt 3600\text{ K}$) except for anomalous dips at $\text{Mn}$ ($3d$) and $\text{Tc}$ ($4d$) (stable half-filled $d^5$ reduces interatomic electron sharing).
  • Enthalpy of Atomisation $\Delta_a H^\circ$ (Fig. 4.2):
    • Peaks around the middle of each series (one unpaired electron per $d$ orbital is ideal for strong bonding): in $3d$, max is $\text{V}\ (515\text{ kJ mol}^{-1})$; min is $\text{Zn}\ (126\text{ kJ mol}^{-1})$.
    • Metals with very high $\Delta_a H^\circ$ (very high B.P.) tend to be noble (unreactive).
    • $4d$ & $5d$ have much higher $\Delta_a H^\circ$ than $3d$ → explains why heavy transition metals form frequent metal–metal bonds in their compounds!

2. Complete Data Reference for the $3d$ Series (NCERT Table 4.2)

Property$\text{Sc}$$\text{Ti}$$\text{V}$$\text{Cr}$$\text{Mn}$$\text{Fe}$$\text{Co}$$\text{Ni}$$\text{Cu}$$\text{Zn}$
Atomic No. ($Z$)21222324252627282930
$\text{M}$ Config$3d^1 4s^2$$3d^2 4s^2$$3d^3 4s^2$$3d^5 4s^1$$3d^5 4s^2$$3d^6 4s^2$$3d^7 4s^2$$3d^8 4s^2$$3d^{10} 4s^1$$3d^{10} 4s^2$
$\text{M}^+$ Config$3d^1 4s^1$$3d^2 4s^1$$3d^3 4s^1$$3d^5$$3d^5 4s^1$$3d^6 4s^1$$3d^7 4s^1$$3d^8 4s^1$$3d^{10}$$3d^{10} 4s^1$
$\text{M}^{2+}$ Config$3d^1$$3d^2$$3d^3$$3d^4$$3d^5$$3d^6$$3d^7$$3d^8$$3d^9$$3d^{10}$
$\text{M}^{3+}$ Config$[\text{Ar}]$$3d^1$$3d^2$$3d^3$$3d^4$$3d^5$$3d^6$$3d^7$––
$\Delta_a H^\circ$ ($\text{kJ mol}^{-1}$)326473515397281416425430339126
$\Delta_i H_1^\circ$ ($\text{kJ mol}^{-1}$)631656650653717762758736745906
$\Delta_i H_2^\circ$ ($\text{kJ mol}^{-1}$)1235130914141592150915611644175219581734
$\Delta_i H_3^\circ$ ($\text{kJ mol}^{-1}$)2393265728332990326029623243340235563837
Metallic Radius (pm)164147135129137126125125128137
$\text{M}^{2+}$ / $\text{M}^{3+}$ (pm)– / 73– / 6779 / 6482 / 6282 / 6577 / 6574 / 6170 / 6073 / –75 / –
$E^\circ(\text{M}^{2+}/\text{M})$ (V)–−1.63−1.18−0.90−1.18−0.44−0.28−0.25+0.34−0.76
$E^\circ(\text{M}^{3+}/\text{M}^{2+})$ (V)–−0.37−0.26−0.41+1.57+0.77+1.97–––
Density ($\text{g cm}^{-3}$)3.434.16.077.197.217.88.78.98.97.1

3. Atomic/Ionic Radii, Density & Ionisation Enthalpies (4.3.2 & 4.3.3)

Radii & Density Trends (Fig. 4.3)

  • Across $3d$: Radii shrink initially ($\text{Sc}\ 164 \to \text{Cr}\ 129\text{ pm}$) due to rising nuclear charge and poor $d$-shielding, stay nearly flat in the middle ($\text{Fe}\ 126, \text{Co}\ 125, \text{Ni}\ 125$), and rise at the end ($\text{Cu}\ 128, \text{Zn}\ 137\text{ pm}$) due to $d$-electron repulsion.
  • Down a Group ($3d \to 4d \to 5d$): Size jumps $3d \to 4d$, then $4d \approx 5d$ ($\text{Zr}\ 160\text{ pm} \approx \text{Hf}\ 159\text{ pm}$) due to Lanthanoid Contraction (imperfect shielding of one $4f$ $e^-$ by another is even weaker than $d$-shielding!).
  • Density: Shrinking radius + increasing atomic mass drives density smoothly upward from $\text{Ti}\ (4.1)$ to $\text{Cu}\ (8.9\text{ g cm}^{-3})$, before dipping at $\text{Zn}\ (7.1)$.

Ionisation Enthalpies & Exchange Energy (4.3.3)

  • Gradual $\Delta_i H_1$: Added inner $3d$ electrons shield outer $4s$ somewhat effectively → $\Delta_i H_1$ rises far less steeply than in $s/p$-block.
  • Three Factors for $d^n$: (1) Nuclear attraction, (2) $e^-\text{–}e^-$ repulsion, and (3) Exchange Energy ($\propto$ number of parallel-spin pairs in degenerate orbitals; Hund’s rule). There is NO loss of exchange energy at $d^6 \to d^5$!
  • Key Breaks: $\Delta_i H_2$ spikes at $\text{Cr}$ ($d^5$) & $\text{Cu}$ ($d^{10}$), dips at $\text{Mn}$ (forms $d^5$) & $\text{Zn}$ (forms $d^{10}$). $\Delta_i H_3$ dips at $\text{Fe}$ ($d^6 \to d^5$) vs spikes at $\text{Mn}$ ($d^5 \to d^4$). High $\Delta_i H_3$ of $\text{Ni, Cu, Zn}$ makes states $\gt +2$ rare.
  • Example 4.2: Large numbers of unpaired $(n-1)d$ electrons create strong interatomic interactions and strong metallic bonds → high $\Delta_a H^\circ$.
  • Intext 4.2 ($\text{Zn}$): $\text{Zn}$ ($3d^{10}4s^2$) has zero unpaired $3d$ electrons; no $3d$ electrons participate in metallic bonding, giving the weakest metallic bond ($126\text{ kJ mol}^{-1}$).

Page 3 of 8 · Oxidation States & ElectrochemistryNCERT 4.3.4–4.3.8

4.3

NCERT Sections 4.3.4–4.3.8 · Full Tables 4.3, 4.4, 4.5 & 4.6

Oxidation States, $E^\circ$ Trends, Halides, Oxides & Chemical Reactivity

Big Idea in 3 Simple Points

  • Why Oxidation States Peak at $\text{Mn}\ (+7)$: Up to $\text{Mn}$ ($3d^5 4s^2$), every $4s$ and unpaired $3d$ electron can participate in bonding (giving $+2$ up to $+7$). Past $\text{Mn}$, $d$-electrons start pairing up so maximum oxidation state drops sharply!
  • Why Copper Is the ONLY $3d$ Metal with Positive $E^\circ(\text{M}^{2+}/\text{M}) = +0.34\text{ V}$: Transforming $\text{Cu}(s) \to \text{Cu}^{2+}(aq)$ requires a massive total enthalpy cost ($\Delta_a H^\circ + \text{IE}_1 + \text{IE}_2 = +3042\text{ kJ mol}^{-1}$) that its hydration enthalpy ($-2121\text{ kJ mol}^{-1}$) cannot fully compensate!
  • Oxygen Beats Fluorine at High Oxidation States: Fluorine only forms single bonds (max $\text{MnF}_4$), whereas Oxygen forms multiple $p\pi\text{–}d\pi$ bonds ($\text{Mn}_2\text{O}_7$, $\text{MnO}_4^-$) — pushing $\text{Mn}$ all the way to $+7$!

1. Variable Oxidation States (Section 4.3.4 & Complete NCERT Table 4.3)

Because $(n-1)d$ and $ns$ energies are very close, transition metals exhibit a broad palette of oxidation states differing by $1$ unit (unlike $p$-block elements, whose states typically differ by $2$ due to the inert pair effect). Bold numbers mark the most common/stable states:

Element$\text{Sc}$$\text{Ti}$$\text{V}$$\text{Cr}$$\text{Mn}$$\text{Fe}$$\text{Co}$$\text{Ni}$$\text{Cu}$$\text{Zn}$
Oxidation States +3 +2, +3, +4 +2, +3, +4, +5 +2, +3, +4, +5, +6 +2, +3, +4, +5, +6, +7 +2, +3, +4, +6 +2, +3, +4 +2, +3, +4 +1, +2 +2
  • Scandium Exception: $\text{Sc(II)}$ is virtually unknown; $\text{Sc}$ only forms stable $\text{Sc(III)}$ ($[\text{Ar}]$).
  • Maximum States in Oxides & Oxoanions: From $\text{Sc}$ to $\text{Mn}$, the highest oxidation state equals the sum of $s$ and $d$ electrons: $\text{Sc}_2\text{O}_3\ (+3)$, $\text{Ti}^{\text{IV}}\text{O}_2\ (+4)$, $\text{V}^{\text{V}}\text{O}_2^+\ (+5)$, $\text{Cr}^{\text{VI}}\text{O}_4^{2-}\ (+6)$, and $\text{Mn}^{\text{VII}}\text{O}_4^-\ (+7)$.
  • Down a Group ($d$-block vs $p$-block): In $p$-block, lower oxidation states become more stable down a group (inert pair effect). In $d$-block, higher oxidation states become MORE stable down a group — e.g., in Group 6, $\text{Mo(VI)}$ and $\text{W(VI)}$ are far more stable than $\text{Cr(VI)}$ (so acidic $\text{Cr}_2\text{O}_7^{2-}$ is a strong oxidising agent, whereas $\text{MoO}_3$ and $\text{WO}_3$ are not!).
  • Zero & Low Oxidation States: Occur with $\pi$-acceptor ligands such as $\text{CO}$, which accept electron density back from metal $d$-orbitals — e.g., $\text{Ni(CO)}_4$ and $\text{Fe(CO)}_5$ (metal in $0$ oxidation state).

2. Trends in Standard Electrode Potentials $E^\circ(\text{M}^{2+}/\text{M})$ (Section 4.3.5 & Full Table 4.4)

The electrode potential $E^\circ(\text{M}^{2+}/\text{M})$ depends on the net enthalpy change $\Delta_T H^\circ$ of converting solid metal $\text{M}(s)$ into hydrated $\text{M}^{2+}(aq)$ ions:

Thermochemical Cycle for $\text{M}(s) \to \text{M}^{2+}(aq) + 2e^-$

$$\Delta_T H^\circ = \Delta_a H^\circ + \Delta_i H_1^\circ + \Delta_i H_2^\circ + \Delta_{\text{hyd}} H^\circ$$

More negative $\Delta_T H^\circ$ (or smaller positive $\Delta_T H^\circ$) → more negative $E^\circ(\text{M}^{2+}/\text{M})$ → greater tendency to be oxidised to $\text{M}^{2+}(aq)$.

Metal ($\text{M}$) $\Delta_a H^\circ$ $\Delta_i H_1^\circ$ $\Delta_i H_2^\circ$ Total Cost ($\text{kJ mol}^{-1}$) $\Delta_{\text{hyd}} H^\circ$ Net $\Delta_T H^\circ$ $E^\circ(\text{M}^{2+}/\text{M})$
$\text{Ti}$4696561309+2434−1866+568−1.63 V
$\text{V}$5156501414+2579−1895+684−1.18 V
$\text{Cr}$3986531592+2643−1925+718−0.90 V
$\text{Mn}$2797171509+2505−1862+643−1.18 V
$\text{Fe}$4187621561+2741−1998+743−0.44 V
$\text{Co}$4277581644+2829−2079+750−0.28 V
$\text{Ni}$4317361752+2919−2121+798−0.25 V
$\text{Cu}$3397451958+3042−2121+921+0.34 V
$\text{Zn}$1309061734+2770−2059+711−0.76 V

NCERT Table 4.4 (all enthalpy values in $\text{kJ mol}^{-1}$). Notice the three famous dips to more negative $E^\circ$ at $\text{Mn}$ (half-filled $d^5$ $\text{Mn}^{2+}$ + low $\Delta_a H^\circ$), $\text{Zn}$ (full $d^{10}$ $\text{Zn}^{2+}$ + very low $\Delta_a H^\circ$), and $\text{Ni}$ (exceptionally high negative $\Delta_{\text{hyd}} H^\circ = -2121\text{ kJ mol}^{-1}$), plus the unique positive spike at $\text{Cu}$ ($+0.34\text{ V}$).

Interactive Lab 1: $E^\circ(\text{M}^{2+}/\text{M})$ Thermochemical Explorer (All 9 Metals)

Pick any metal from NCERT Table 4.4 ($\text{Ti}$ through $\text{Zn}$) to compare atomisation + ionisation cost against hydration payback.

NCERT Table 4.4
Total Cost ($\Delta_a H^\circ + \text{IE}_1 + \text{IE}_2$)
+3042 kJ/mol
Hydration ($\Delta_{\text{hyd}} H^\circ$)
−2121 kJ/mol
Net $\Delta_T H^\circ$
+921 kJ/mol
$E^\circ(\text{M}^{2+}/\text{M})$
+0.34 V
Copper ($\text{Cu}$): The ONLY $3d$ metal with positive $E^\circ$! Because $\Delta_a H^\circ\ (339) + \text{IE}_1\ (745) + \text{IE}_2\ (1958) = +3042\text{ kJ mol}^{-1}$ is NOT balanced by $\Delta_{\text{hyd}} H^\circ\ (-2121)$, Cu cannot liberate $\text{H}_2$ from dilute acids — only oxidising acids ($\text{HNO}_3$, hot conc. $\text{H}_2\text{SO}_4$) dissolve it.

3. Trends in $E^\circ(\text{M}^{3+}/\text{M}^{2+})$ (Section 4.3.6)

  • Very Low Value for $\text{Sc}$: Reflects the huge stability of $\text{Sc}^{3+}$ (closed noble-gas $[\text{Ar}]$ configuration).
  • Low Value for $\text{V}\ (-0.26\text{ V})$ & $\text{Cr}\ (-0.41\text{ V})$: $\text{V}^{2+}$ ($d^3$) and $\text{Cr}^{3+}$ ($d^3$) both enjoy the extra crystal-field stability of a half-filled $t_{2g}^3$ level; hence $\text{Cr}^{2+}$ ($d^4$) is a strong reducing agent that eagerly oxidises to $\text{Cr}^{3+}$ ($t_{2g}^3$).
  • Comparatively Low Value for $\text{Fe}\ (+0.77\text{ V})$: Forming half-filled $3d^5$ makes $\text{Fe}^{3+}$ relatively easy to reach from $\text{Fe}^{2+}$ ($3d^6$).
  • High Values for $\text{Mn}\ (+1.57\text{ V})$ & $\text{Co}\ (+1.97\text{ V})$: $\text{Mn}^{3+}$ ($d^4$) strongly desires reduction to half-filled $\text{Mn}^{2+}$ ($d^5$), while $\text{Co}^{3+}$ has an extremely high third ionisation enthalpy — making $\text{Mn}^{3+}$ and $\text{Co}^{3+}$ powerful oxidising agents in aqueous solution!
  • Highest Value for $\text{Zn}$: Removing a third electron from stable full-shell $\text{Zn}^{2+}$ ($3d^{10}$) is energetically prohibitive.

4. Stability of Higher Oxidation States: Halides & Oxides (Section 4.3.7 & Tables 4.5–4.6)

Complete NCERT Table 4.5 — Halides of $3d$ Transition Metals

Ox. State$\text{Ti}$$\text{V}$$\text{Cr}$$\text{Mn}$$\text{Fe}$$\text{Co}$$\text{Ni}$$\text{Cu}$$\text{Zn}$
+6––$\text{CrF}_6$––––––
+5–$\text{VF}_5$$\text{CrF}_5$––––––
+4$\text{TiX}_4$$\text{VX}_4^{\text{I}}$$\text{CrX}_4$$\text{MnF}_4$–––––
+3$\text{TiX}_3$$\text{VX}_3$$\text{CrX}_3$$\text{MnF}_3$$\text{FeX}_3^{\text{I}}$$\text{CoF}_3$–––
+2$\text{TiX}_2^{\text{III}}$$\text{VX}_2$$\text{CrX}_2$$\text{MnX}_2$$\text{FeX}_2$$\text{CoX}_2$$\text{NiX}_2$$\text{CuX}_2^{\text{II}}$$\text{ZnX}_2$
+1–––––––$\text{CuX}^{\text{III}}$–

Key: $\text{X} = \text{F}$ to $\text{I}$; $\text{X}^{\text{I}} = \text{F}$ to $\text{Br}$; $\text{X}^{\text{II}} = \text{F}, \text{Cl}, \text{Br}$ (no $\text{CuI}_2$!); $\text{X}^{\text{III}} = \text{Cl}$ to $\text{I}$ (no $\text{CuF}$!).

  • Why Fluorine Stabilises High States: Either due to high lattice enthalpy ($\text{CoF}_3$) or high bond enthalpy for covalent fluorides ($\text{VF}_5, \text{CrF}_6$). Even in oxohalides, $\text{MnO}_3\text{F}$ reaches $\text{Mn(VII)}$, while pure fluorides top out at $\text{MnF}_4$.
  • Vanadium(V) Halides & Hydrolysis: Only $\text{VF}_5$ exists as a pure pentahalide; other halides hydrolyse to oxohalides $\text{VOX}_3$.
  • Low-State Fluorides Are Unstable: Fluorides are unstable in low oxidation states (e.g., $\text{VX}_2$ and $\text{CuX}$ do not form fluorides; $\text{CuF}$ is unknown).
  • Copper Halide & Disproportionation Equations (Guaranteed Board Questions!):
    • All $\text{Cu(II)}$ halides are known except $\text{CuI}_2$, because $\text{Cu}^{2+}$ oxidises $\text{I}^-$ to $\text{I}_2$: $$2\text{Cu}^{2+} + 4\text{I}^- \longrightarrow \text{Cu}_2\text{I}_2(s) + \text{I}_2$$
    • Many $\text{Cu(I)}$ compounds are unstable in aqueous solution and undergo disproportionation because $\Delta_{\text{hyd}} H^\circ(\text{Cu}^{2+})$ is far more negative than $\Delta_{\text{hyd}} H^\circ(\text{Cu}^+)$ (more than offsetting $\text{IE}_2$ of $\text{Cu}$): $$2\text{Cu}^+(aq) \longrightarrow \text{Cu}^{2+}(aq) + \text{Cu}(s)$$

Complete NCERT Table 4.6 — Oxides of $3d$ Transition Metals

Ox. StateG3 ($\text{Sc}$)G4 ($\text{Ti}$)G5 ($\text{V}$)G6 ($\text{Cr}$)G7 ($\text{Mn}$)G8 ($\text{Fe}$)G9 ($\text{Co}$)G10 ($\text{Ni}$)G11 ($\text{Cu}$)G12 ($\text{Zn}$)
+7––––$\text{Mn}_2\text{O}_7$–––––
+6–––$\text{CrO}_3$––––––
+5––$\text{V}_2\text{O}_5$–––––––
+4–$\text{TiO}_2$$\text{V}_2\text{O}_4$$\text{CrO}_2$$\text{MnO}_2$–––––
+3$\text{Sc}_2\text{O}_3$$\text{Ti}_2\text{O}_3$$\text{V}_2\text{O}_3$$\text{Cr}_2\text{O}_3$$\text{Mn}_2\text{O}_3$*$\text{Fe}_2\text{O}_3$**–––
+2–$\text{TiO}$$\text{VO}$$(\text{CrO})$$\text{MnO}$$\text{FeO}$$\text{CoO}$$\text{NiO}$$\text{CuO}$$\text{ZnO}$
+1––––––––$\text{Cu}_2\text{O}$–

*Mixed oxides also exist: $\text{Mn}_3\text{O}_4$, $\text{Fe}_3\text{O}_4$, and $\text{Co}_3\text{O}_4$. Above Group 7, no higher oxide of $\text{Fe}$ exists above $\text{Fe}_2\text{O}_3$, though alkaline ferrates ($\text{FeO}_4^{2-}$) form and decompose rapidly to $\text{Fe}_2\text{O}_3 + \text{O}_2$. Oxocations stabilise high states: $\text{V}^{\text{V}}\text{O}_2^+$, $\text{V}^{\text{IV}}\text{O}^{2+}$, $\text{Ti}^{\text{IV}}\text{O}^{2+}$, and tetrahedral $[\text{MO}_4]^{n-}$ ($\text{VO}_4^{3-}, \text{CrO}_4^{2-}, \text{MnO}_4^-$).

5. Chemical Reactivity & Passive Metals (Section 4.3.8)

  • Wide Reactivity Spectrum: Many transition metals are electropositive enough to dissolve in mineral acids, while a few are noble (unreactive to single acids). Except $\text{Cu}$, all $3d$ metals have negative $E^\circ(\text{M}^{2+}/\text{M})$ and should thermodynamically liberate $\text{H}_2$ from dilute acids — yet $\text{Ti}$ and $\text{V}$ are passive to dilute non-oxidising acids at room temperature due to a protective surface oxide film!
  • Strong Reducing Divalent Ions: $\text{Ti}^{2+}$, $\text{V}^{2+}$, and $\text{Cr}^{2+}$ are powerful reducing agents that liberate $\text{H}_2$ directly from dilute acids: $$2\text{Cr}^{2+}(aq) + 2\text{H}^+(aq) \longrightarrow 2\text{Cr}^{3+}(aq) + \text{H}_2(g)$$

Manganese ($\text{Mn}, Z=25$, $3d^5 4s^2$) exhibits the maximum number of oxidation states (from $+2$ to $+7$) because it has the greatest number of unpaired electrons ($5$ in $3d$ plus $2$ in $4s$) available to share or lose in bonding.

Converting $\text{Cu}(s) \to \text{Cu}^{2+}(aq)$ requires a high sum of atomisation and ionisation enthalpies ($339 + 745 + 1958 = +3042\text{ kJ mol}^{-1}$), which is NOT offset by its hydration enthalpy ($-2121\text{ kJ mol}^{-1}$). The large net endothermic value ($+921\text{ kJ mol}^{-1}$) gives $\text{Cu}$ a positive $E^\circ = +0.34\text{ V}$.

Irregularities stem from varying third ionisation enthalpies ($\Delta_i H_3^\circ$) tied to half-filled stability: $\text{Cr}^{3+}$ ($t_{2g}^3$) is very stable ($E^\circ = -0.41\text{ V}$); $\text{Mn}^{2+}$ ($d^5$) resists oxidation to $\text{Mn}^{3+}$ ($E^\circ = +1.57\text{ V}$); and $\text{Fe}^{2+}$ ($d^6$) easily loses one $e^-$ to reach stable $d^5$ $\text{Fe}^{3+}$ ($E^\circ = +0.77\text{ V}$).

Oxygen can form multiple ($p\pi\text{–}d\pi$) bonds with transition metals (e.g., $\text{Mn}_2\text{O}_7$, oxidation state $+7$), whereas fluorine forms only single bonds (highest manganese fluoride is $\text{MnF}_4$, state $+4$).

$\text{Cr}^{2+}$ is stronger than $\text{Fe}^{2+}$ because oxidising $\text{Cr}^{2+}$ ($d^4$) produces $\text{Cr}^{3+}$ ($d^3$), which has a half-filled $t_{2g}^3$ crystal-field level in aqueous medium ($E^\circ = -0.41\text{ V}$). Oxidising $\text{Fe}^{2+}$ ($d^6$) to $\text{Fe}^{3+}$ ($d^5$) has a positive potential ($+0.77\text{ V}$), making $\text{Cr}^{2+}$ far easier to oxidise.

Page 4 of 8 · Signature Transition PropertiesNCERT 4.3.9–4.3.14

4.3

NCERT Sections 4.3.9–4.3.14 · Full Tables 4.7 & 4.8

Magnetism, Coloured Ions, Complexes, Catalysis, Interstitials & Alloys

Big Idea in 3 Simple Points

  • Spin-Only Magnetism: For $3d$ ions, orbital motion is quenched by ligands, so magnetic moment depends solely on unpaired electron count $n$: $\mu = \sqrt{n(n+2)}\text{ BM}$ (peaks at $d^5$: $5.92\text{ BM}$!).
  • Why Aqueous $d$-Block Ions Are Coloured: Ligand fields split the five $d$-orbitals; visible light excites a $d$-electron to a higher $d$-level ($d\text{–}d$ transition), and we see the complementary colour. Ions with $d^0$ or $d^{10}$ are colourless!
  • Why They Excel as Catalysts, Interstitials & Alloys: Variable oxidation states + vacant $d$-orbitals enable intermediate pathways (catalysis); small non-metals ($\text{H, B, C, N}$) fit inside crystal voids (interstitials); and similar atomic radii ($\pm 15\%$) allow smooth substitution (alloys)!

1. Magnetic Properties & Complete NCERT Table 4.7 (Section 4.3.9)

Substances are diamagnetic (repelled by magnetic field; all $e^-$ paired), paramagnetic (attracted; unpaired $e^-$), or ferromagnetic (extreme paramagnetism, e.g., $\text{Fe, Co, Ni}$). For $3d$ ions, the spin-only formula gives reliable magnetic moments in Bohr Magnetons ($\text{BM}$):

Spin-Only Magnetic Moment Formula

$$\mu = \sqrt{n(n+2)}\ \text{BM}$$

Where $n$ = number of unpaired electrons ($1\ \text{BM} = 9.27 \times 10^{-24}\ \text{J T}^{-1}$). Quick shortcut: $\mu \approx n + 0.8\text{ to }0.9\text{ BM}$!

IonOuter ConfigUnpaired $e^-$ ($n$)Calculated $\mu$ (BM)Observed $\mu$ (BM)
$\text{Sc}^{3+}$$3d^0$000
$\text{Ti}^{3+}$$3d^1$11.731.75
$\text{Ti}^{2+}$$3d^2$22.842.76
$\text{V}^{2+}$$3d^3$33.873.86
$\text{Cr}^{2+}$$3d^4$44.904.80
$\text{Mn}^{2+}$$3d^5$55.925.96
$\text{Fe}^{2+}$$3d^6$44.905.3–5.5
$\text{Co}^{2+}$$3d^7$33.874.4–5.2
$\text{Ni}^{2+}$$3d^8$22.842.9–3.4
$\text{Cu}^{2+}$$3d^9$11.731.8–2.2
$\text{Zn}^{2+}$$3d^{10}$000

NCERT Table 4.7 (all 11 ions). Notice that $\text{Fe}^{2+}, \text{Co}^{2+}, \text{Ni}^{2+}$ show slightly higher observed $\mu$ than calculated due to minor unquenched orbital contribution.

Interactive Lab 2: Spin-Only Magnetic Moment & $3d$ Ion Matcher

Slide the unpaired electron count ($n = 0$ to $5$) to compute $\mu = \sqrt{n(n+2)}\text{ BM}$ and match matching $3d$ ions.

NCERT Table 4.7
n = 5
Spin-Only $\mu$
5.92 BM
Magnetic Nature
Strongly Paramagnetic
Matching $3d$ Ions
Mn²⁺, Fe³⁺ (3d⁵)
Peak spin-only paramagnetism in the $3d$ series: five singly occupied $3d$ orbitals give $\mu = \sqrt{5(7)} = \sqrt{35} = 5.92\text{ BM}$!

2. Formation of Coloured Ions & Complete NCERT Table 4.8 (Section 4.3.10)

When an electron from a lower-energy $d$-orbital absorbs a photon of visible light matching the crystal-field gap $\Delta$ and jumps to a higher-energy $d$-orbital, the ion transmits the complementary colour. Ions with $d^0$ ($\text{Sc}^{3+}, \text{Ti}^{4+}$) or $d^{10}$ ($\text{Cu}^+, \text{Zn}^{2+}$) have no $d\text{–}d$ transition possible and are colourless:

ConfigIon ExampleAqueous ColourConfigIon ExampleAqueous Colour
$3d^0$$\text{Sc}^{3+}$Colourless$3d^5$$\text{Mn}^{2+}$Pink (very pale)
$3d^0$$\text{Ti}^{4+}$Colourless$3d^5$$\text{Fe}^{3+}$Yellow
$3d^1$$\text{Ti}^{3+}$Purple$3d^6$$\text{Fe}^{2+}$Green
$3d^1$$\text{V}^{4+}$Blue$3d^6$$\text{Co}^{3+}$Blue
$3d^2$$\text{V}^{3+}$Green$3d^7$$\text{Co}^{2+}$Pink
$3d^3$$\text{V}^{2+}$Violet$3d^8$$\text{Ni}^{2+}$Green
$3d^3$$\text{Cr}^{3+}$Violet$3d^9$$\text{Cu}^{2+}$Blue
$3d^4$$\text{Mn}^{3+}$Violet$3d^{10}$$\text{Zn}^{2+}$Colourless
$3d^4$$\text{Cr}^{2+}$Blue$3d^{10}$$\text{Cu}^+$Colourless

Complete NCERT Table 4.8 (all 16 listed aqueous ions + $\text{Cu}^+$). Note: Deep colours of $\text{MnO}_4^-$ (purple, $d^0$) and $\text{Cr}_2\text{O}_7^{2-}$ (orange, $d^0$) come from Ligand-to-Metal Charge Transfer (LMCT), NOT $d\text{–}d$ transitions!

3. Complexes, Catalysis, Interstitial Compounds & Alloys (Sections 4.3.11–4.3.14)

Complex Formation (4.3.11)

  • Transition metals bind anions or neutral ligands (e.g., $[\text{Fe(CN)}_6]^{3-}$, $[\text{Fe(CN)}_6]^{4-}$, $[\text{Cu(NH}_3)_4]^{2+}$, $[\text{PtCl}_4]^{2-}$) due to:
  • (1) Comparatively smaller ionic sizes,
  • (2) High ionic charges (high charge-to-radius ratio), and
  • (3) Availability of vacant $d$-orbitals for coordinate bond formation.

Catalytic Properties (4.3.12)

  • Two Mechanisms: (a) Adopting multiple oxidation states & forming complexes; (b) Providing a large solid surface where reactants form weak bonds using surface $3d$ and $4s$ electrons, raising local concentration and weakening reactant bonds.
  • Industrial Catalysts: $\text{V}_2\text{O}_5$ (Contact Process, $\text{H}_2\text{SO}_4$), finely divided $\text{Fe}$ (Haber Process, $\text{NH}_3$), $\text{Ni}$ (catalytic hydrogenation).
  • Homogeneous $\text{Fe}^{3+}$ Example (Board Favourite!): Catalyses $2\text{I}^- + \text{S}_2\text{O}_8^{2-} \to \text{I}_2 + 2\text{SO}_4^{2-}$ via two low-$E_a$ steps:
    • $2\text{Fe}^{3+} + 2\text{I}^- \longrightarrow 2\text{Fe}^{2+} + \text{I}_2$
    • $2\text{Fe}^{2+} + \text{S}_2\text{O}_8^{2-} \longrightarrow 2\text{Fe}^{3+} + 2\text{SO}_4^{2-}$

Interstitial Compounds (4.3.13)

  • Formed when tiny atoms ($\text{H, C, N, B}$) get trapped inside crystal lattice voids of transition metals. Usually non-stoichiometric (neither purely ionic nor purely covalent): e.g., $\text{TiC}, \text{Mn}_4\text{N}, \text{Fe}_3\text{H}, \text{VH}_{0.56}, \text{TiH}_{1.7}$.
  • 4 Key Properties: (1) Higher melting points than pure metals; (2) Extremely hard (some borides approach diamond); (3) Retain metallic conductivity; (4) Chemically inert!

Alloy Formation (4.3.14)

  • Because transition metals have nearly identical metallic radii (within $\approx 15\%$), atoms of one metal readily substitute into the lattice of another, forming homogeneous solid solutions (alloys).
  • Ferrous Alloys: $\text{Cr, V, W, Mo, Mn}$ alloyed with iron produce high-strength specialty steels & stainless steel.
  • Non-Ferrous Alloys: Brass ($\text{Cu} + \text{Zn}$) and Bronze ($\text{Cu} + \text{Sn}$) have high industrial importance.
  • $Z = 25$ is $\text{Mn}$ ($[\text{Ar}]\,3d^5 4s^2$). Removing two $4s$ electrons gives $\text{Mn}^{2+}$: $[\text{Ar}]\,3d^5$, which has $n = 5$ unpaired electrons.
  • $$\mu = \sqrt{n(n+2)} = \sqrt{5(5+2)} = \sqrt{35} = \mathbf{5.92\text{ BM}}$$

When a single oxidation state becomes less stable relative to both a higher and a lower oxidation state, it simultaneously oxidises and reduces itself (disproportionation):

  • $\text{Mn(VI)}$ in acidic solution: $3\text{MnO}_4^{2-} + 4\text{H}^+ \longrightarrow 2\text{MnO}_4^- + \text{MnO}_2 + 2\text{H}_2\text{O}$
  • $\text{Cu(I)}$ in aqueous solution: $2\text{Cu}^+(aq) \longrightarrow \text{Cu}^{2+}(aq) + \text{Cu}(s)$

Page 5 of 8 · Important Compounds of Transition MetalsNCERT 4.4

4.4

NCERT Section 4.4 · Complete Preparations, Structures, 9 $\text{KMnO}_4$ Equations & Redox Lab

Oxides, Potassium Dichromate ($\text{K}_2\text{Cr}_2\text{O}_7$) & Potassium Permanganate ($\text{KMnO}_4$)

Big Idea in 3 Simple Points

  • Higher Oxidation State = More Covalent & More Acidic Oxide: Ionic lower oxides ($\text{CrO}, \text{V}_2\text{O}_3, \text{MnO}$) are basic, intermediate oxides ($\text{Cr}_2\text{O}_3, \text{V}_2\text{O}_5$) are amphoteric, and high oxides ($\text{CrO}_3, \text{Mn}_2\text{O}_7$) are covalent and acidic!
  • Chromate ↔ Dichromate Is Simply a pH Switch: Same $\text{Cr(+6)}$ state! Add acid ($\text{H}^+$) → yellow $\text{CrO}_4^{2-}$ turns orange $\text{Cr}_2\text{O}_7^{2-}$; add base ($\text{OH}^-$) → switches right back to yellow $\text{CrO}_4^{2-}$!
  • $\text{KMnO}_4$ Oxidising Power Changes With pH: Acidic ($\Delta = 5e^-$ → colourless $\text{Mn}^{2+}$), Neutral/Faintly Alkaline ($\Delta = 3e^-$ → brown $\text{MnO}_2$), Strongly Alkaline ($\Delta = 1e^-$ → green $\text{MnO}_4^{2-}$).

1. Oxides & Oxoanions of Metals (Section 4.4)

  • General Synthesis: Formed by heating metals directly with oxygen at high temperature. All $3d$ metals except $\text{Sc}$ form $\text{MO}$ oxides which are ionic.
  • Vanadium Oxide Sequence: $\text{V}_2\text{O}_3$ (basic) → $\text{V}_2\text{O}_4$ (less basic; dissolves in acids to give $\text{VO}^{2+}$ salts) → $\text{V}_2\text{O}_5$ (amphoteric, though mainly acidic; yields $\text{VO}_4^{3-}$ in alkalies and $\text{VO}_2^+$ in acids).
  • Chromium Oxide Sequence: $\text{CrO}$ (basic) → $\text{Cr}_2\text{O}_3$ (amphoteric) → $\text{CrO}_3$ (acidic; dissolves in water to form $\text{H}_2\text{CrO}_4 / \text{H}_2\text{Cr}_2\text{O}_7$).
  • Manganese Highest Oxide: $\text{Mn}_2\text{O}_7$ is a covalent green oil that dissolves in water to form strongly acidic permanganic acid ($\text{HMnO}_4$).

2. Potassium Dichromate ($\text{K}_2\text{Cr}_2\text{O}_7$) — Preparation, Structure & Reactions

Crucial in the leather industry and as an oxidant for preparing many azo compounds. Sodium dichromate ($\text{Na}_2\text{Cr}_2\text{O}_7$) is more soluble in water and extensively used in organic synthesis, whereas less-soluble, non-hygroscopic $\text{K}_2\text{Cr}_2\text{O}_7$ is used as a primary standard in volumetric analysis.

3-Step Preparation from Chromite Ore ($\text{FeCr}_2\text{O}_4$)

$$\text{Step 1 (Roasting): } 4\text{FeCr}_2\text{O}_4 + 8\text{Na}_2\text{CO}_3 + 7\text{O}_2 \longrightarrow 8\text{Na}_2\text{CrO}_4 + 2\text{Fe}_2\text{O}_3 + 8\text{CO}_2$$ $$\text{Step 2 (Acidification): } 2\text{Na}_2\text{CrO}_4 + 2\text{H}^+ \longrightarrow \text{Na}_2\text{Cr}_2\text{O}_7 + 2\text{Na}^+ + \text{H}_2\text{O}$$ $$\text{Step 3 (Metathesis): } \text{Na}_2\text{Cr}_2\text{O}_7 + 2\text{KCl} \longrightarrow \text{K}_2\text{Cr}_2\text{O}_7 \downarrow + 2\text{NaCl}$$

Yellow $\text{Na}_2\text{CrO}_4$ solution is filtered, acidified with $\text{H}_2\text{SO}_4$ to crystallise orange $\text{Na}_2\text{Cr}_2\text{O}_7\cdot 2\text{H}_2\text{O}$, then treated with $\text{KCl}$ so less-soluble orange crystals of $\text{K}_2\text{Cr}_2\text{O}_7$ precipitate out.

pH-Controlled Interconversion (No Change in $\text{Cr}$ Oxidation State $= +6$)

$$2\text{CrO}_4^{2-}\text{ (yellow)} + 2\text{H}^+ \rightleftharpoons \text{Cr}_2\text{O}_7^{2-}\text{ (orange)} + \text{H}_2\text{O}$$ $$\text{Cr}_2\text{O}_7^{2-}\text{ (orange)} + 2\text{OH}^- \rightleftharpoons 2\text{CrO}_4^{2-}\text{ (yellow)} + \text{H}_2\text{O}$$
Chromate Ion (CrO₄²⁻) Tetrahedral · Yellow · Cr(+6) Cr O O O O 2− 4 equivalent Cr–O bonds Dichromate Ion (Cr₂O₇²⁻) Two Tetrahedra Sharing One Corner O · Orange · Cr(+6) 126° 179 pm 179 pm 163 pm 163 pm O Cr Cr O O O O O O 2− 6 equivalent terminal Cr–O (163 pm) · 2 longer bridging Cr–O (179 pm)

NCERT Section 4.4 Structural Diagram: Chromate ($\text{CrO}_4^{2-}$) is tetrahedral; Dichromate ($\text{Cr}_2\text{O}_7^{2-}$) consists of two tetrahedra sharing one oxygen corner at $\angle\text{Cr–O–Cr} = 126^\circ$.

Oxidising Reactions of Acidified $\text{K}_2\text{Cr}_2\text{O}_7$

Dichromate Reduction Half-Reaction ($E^\circ = +1.33\text{ V}$)

$$\text{Cr}_2\text{O}_7^{2-} + 14\text{H}^+ + 6e^- \longrightarrow 2\text{Cr}^{3+} + 7\text{H}_2\text{O}$$

Combine with any of the 4 NCERT reductant half-reactions below (match $6e^-$):

  • Iodide to Iodine: $6\text{I}^- \longrightarrow 3\text{I}_2 + 6e^-$
  • Hydrogen Sulphide to Sulphur: $3\text{H}_2\text{S} \longrightarrow 6\text{H}^+ + 3\text{S} + 6e^-$
  • Tin(II) to Tin(IV): $3\text{Sn}^{2+} \longrightarrow 3\text{Sn}^{4+} + 6e^-$
  • Iron(II) to Iron(III): $6\text{Fe}^{2+} \longrightarrow 6\text{Fe}^{3+} + 6e^-$ ⇒ Full ionic equation: $$\text{Cr}_2\text{O}_7^{2-} + 14\text{H}^+ + 6\text{Fe}^{2+} \longrightarrow 2\text{Cr}^{3+} + 6\text{Fe}^{3+} + 7\text{H}_2\text{O}$$

3. Potassium Permanganate ($\text{KMnO}_4$) — Preparation, Structure & ALL 9 Redox Equations

  • Commercial Preparation (2 Routes from Pyrolusite $\text{MnO}_2$):
    • Step 1 (Alkaline Fusion): Fuse $\text{MnO}_2$ with $\text{KOH}$ and an oxidising agent ($\text{O}_2$ or $\text{KNO}_3$) to form dark green $\text{K}_2\text{MnO}_4$: $$2\text{MnO}_2 + 4\text{KOH} + \text{O}_2 \longrightarrow 2\text{K}_2\text{MnO}_4 + 2\text{H}_2\text{O}$$
    • Step 2a (Neutral/Acidic Disproportionation): $3\text{MnO}_4^{2-} + 4\text{H}^+ \longrightarrow 2\text{MnO}_4^- + \text{MnO}_2 + 2\text{H}_2\text{O}$
    • Step 2b (Commercial Electrolytic Oxidation): $\text{MnO}_4^{2-}$ is oxidised electrolytically in alkaline solution to $\text{MnO}_4^-$ without wasting $\frac{1}{3}$ of Mn as $\text{MnO}_2$: $$\text{MnO}_4^{2-} \xrightarrow{\text{electrolytic oxidation (alkaline)}} \text{MnO}_4^- + e^-$$
  • Laboratory Preparation (Peroxodisulphate Oxidation of $\text{Mn}^{2+}$): $$2\text{Mn}^{2+} + 5\text{S}_2\text{O}_8^{2-} + 8\text{H}_2\text{O} \longrightarrow 2\text{MnO}_4^- + 10\text{SO}_4^{2-} + 16\text{H}^+$$
  • Physical & Thermal Properties: Dark purple (almost black) crystals isostructural with $\text{KClO}_4$; moderately soluble in water ($6.4\text{ g}$ per $100\text{ g}$ water at $293\text{ K}$). Decomposes on heating at $513\text{ K}$: $$2\text{KMnO}_4 \xrightarrow{513\text{ K}} \text{K}_2\text{MnO}_4 + \text{MnO}_2 + \text{O}_2$$
Tetrahedral Manganate (MnO₄²⁻) Dark Green · Mn(+6) · 3d¹ · Paramagnetic (1 unpaired e⁻) Mn O O O O 2− Tetrahedral Permanganate (MnO₄⁻) Deep Purple · Mn(+7) · 3d⁰ · Diamagnetic (LMCT colour) Mn O O O O −

NCERT Section 4.4 Structural Diagram: Both $\text{MnO}_4^{2-}$ and $\text{MnO}_4^-$ are tetrahedral with $\pi$-bonding from filled $p$-orbitals of oxygen overlapping vacant $d$-orbitals of $\text{Mn}$. $\text{MnO}_4^-$ is weakly temperature-independent paramagnetic / practically diamagnetic.

The 3 Reduction Half-Reactions & Kinetics Note

pH-Dependent Standard Reduction Potentials of $\text{MnO}_4^-$

$$\text{1. Strongly Alkaline: } \text{MnO}_4^- + e^- \longrightarrow \text{MnO}_4^{2-} \quad (E^\circ = +0.56\text{ V})$$ $$\text{2. Neutral / Faintly Alkaline: } \text{MnO}_4^- + 4\text{H}^+ + 3e^- \longrightarrow \text{MnO}_2 + 2\text{H}_2\text{O} \quad (E^\circ = +1.69\text{ V})$$ $$\text{3. Acidic Medium: } \text{MnO}_4^- + 8\text{H}^+ + 5e^- \longrightarrow \text{Mn}^{2+} + 4\text{H}_2\text{O} \quad (E^\circ = +1.52\text{ V})$$

Kinetics Note: Although $E^\circ(\text{MnO}_4^-/\text{Mn}^{2+}) = 1.52\text{ V} \gt E^\circ(\text{O}_2/\text{H}_2\text{O}) = 1.23\text{ V}$ implies $\text{MnO}_4^-$ should oxidise water, the reaction is kinetically very slow unless $\text{Mn}^{2+}$ ions are present (autocatalysis) or temperature is raised! Also, never acidify $\text{KMnO}_4$ with $\text{HCl}$ (it oxidises $\text{Cl}^- \to \text{Cl}_2$); use dilute $\text{H}_2\text{SO}_4$.

All 6 Complete Balanced Acidic-Medium Equations (NCERT a–f)

#Reductant → ProductFull Balanced Ionic Equation (Acidic $\text{H}_2\text{SO}_4$)
(a)$\text{I}^- \to \text{I}_2$$10\text{I}^- + 2\text{MnO}_4^- + 16\text{H}^+ \longrightarrow 2\text{Mn}^{2+} + 8\text{H}_2\text{O} + 5\text{I}_2$
(b)$\text{Fe}^{2+} \to \text{Fe}^{3+}$$5\text{Fe}^{2+} + \text{MnO}_4^- + 8\text{H}^+ \longrightarrow \text{Mn}^{2+} + 4\text{H}_2\text{O} + 5\text{Fe}^{3+}$
(c)$\text{C}_2\text{O}_4^{2-} \to \text{CO}_2$ ($333\text{ K}$)$5\text{C}_2\text{O}_4^{2-} + 2\text{MnO}_4^- + 16\text{H}^+ \longrightarrow 2\text{Mn}^{2+} + 8\text{H}_2\text{O} + 10\text{CO}_2$
(d)$\text{H}_2\text{S} / \text{S}^{2-} \to \text{S}$$5\text{S}^{2-} + 2\text{MnO}_4^- + 16\text{H}^+ \longrightarrow 2\text{Mn}^{2+} + 8\text{H}_2\text{O} + 5\text{S}$
(e)$\text{SO}_3^{2-} \to \text{SO}_4^{2-}$$5\text{SO}_3^{2-} + 2\text{MnO}_4^- + 6\text{H}^+ \longrightarrow 2\text{Mn}^{2+} + 3\text{H}_2\text{O} + 5\text{SO}_4^{2-}$
(f)$\text{NO}_2^- \to \text{NO}_3^-$$5\text{NO}_2^- + 2\text{MnO}_4^- + 6\text{H}^+ \longrightarrow 2\text{Mn}^{2+} + 3\text{H}_2\text{O} + 5\text{NO}_3^-$

All 3 Complete Balanced Neutral / Faintly Alkaline Equations (NCERT a–c)

#Reductant → ProductFull Balanced Ionic Equation (Neutral / Faintly Alkaline)
(a)$\text{I}^- \to \text{IO}_3^-$ (Iodate!)$2\text{MnO}_4^- + \text{H}_2\text{O} + \text{I}^- \longrightarrow 2\text{MnO}_2 + 2\text{OH}^- + \text{IO}_3^-$
(b)$\text{S}_2\text{O}_3^{2-} \to \text{SO}_4^{2-}$$8\text{MnO}_4^- + 3\text{S}_2\text{O}_3^{2-} + \text{H}_2\text{O} \longrightarrow 8\text{MnO}_2 + 6\text{SO}_4^{2-} + 2\text{OH}^-$
(c)$\text{Mn}^{2+} \to \text{MnO}_2$*$2\text{MnO}_4^- + 3\text{Mn}^{2+} + 2\text{H}_2\text{O} \longrightarrow 5\text{MnO}_2 + 4\text{H}^+$

*Reaction (c) is catalysed by $\text{ZnSO}_4$ or $\text{ZnO}$. Uses of $\text{KMnO}_4$: Analytical titrant, favourite oxidant in preparative organic chemistry, bleaching of wool, cotton, silk and other textile fibres, and decolourisation of oils.

Interactive Lab 3: $\text{KMnO}_4$ & $\text{K}_2\text{Cr}_2\text{O}_7$ Redox Reaction Predictor

Switch reaction medium to inspect the product of $\text{MnO}_4^-$/$\text{Cr}_2\text{O}_7^{2-}$, electron transfer ($n$), and what happens to $\text{I}^-$.

NCERT 4.4
Oxidation State Change
+7 → +2 (5 e⁻)
Reduced Species
Mn²⁺ (Colourless)
Action on Iodide (I⁻)
I⁻ → I₂
Acidic $\text{KMnO}_4$ ($\text{dil. H}_2\text{SO}_4$): Strongest volumetric pathway ($n=5, E^\circ=+1.52\text{ V}$). Oxidises $\text{I}^- \to \text{I}_2$, $\text{Fe}^{2+} \to \text{Fe}^{3+}$, $\text{C}_2\text{O}_4^{2-} \to \text{CO}_2$, $\text{S}^{2-} \to \text{S}$, $\text{SO}_3^{2-} \to \text{SO}_4^{2-}$, and $\text{NO}_2^- \to \text{NO}_3^-$.

Page 6 of 8 · Inner Transition ($f$-Block) ElementsNCERT 4.5–4.7

4.5

NCERT Sections 4.5–4.7 · Full Tables 4.9, 4.10, 4.11 & Fig. 4.7 Reaction Wheel

The Lanthanoids, The Actinoids & Industrial Applications

Big Idea in 3 Simple Points

  • Lanthanoid Contraction: Across $\text{La}\ (57) \to \text{Lu}\ (71)$, ionic radii $\text{Ln}^{3+}$ steadily shrink ($106 \to 86\text{ pm}$) due to poor mutual shielding of $4f$ electrons — making $4d$ & $5d$ pairs ($\text{Zr/Hf}$) twins and lowering hydroxide basicity ($\text{La(OH)}_3 \gt \text{Lu(OH)}_3$).
  • Why Lanthanoids Prefer $+3$ While Actinoids Show $+3$ to $+7$: $4f$ orbitals are buried deep inside, leaving only $+3$ (plus $f^0, f^7, f^{14}$ exceptions $\text{Ce}^{4+}, \text{Eu}^{2+}, \text{Tb}^{4+}, \text{Yb}^{2+}$). In actinoids, $5f, 6d, 7s$ have nearly identical energies and $5f$ shields even worse → greater contraction & wider oxidation states up to $+7$ ($\text{Np, Pu}$)!
  • Board Exam Anchor: Memorise the Mischmetall recipe ($\approx 95\%\text{ Ln} + 5\%\text{ Fe}$), all 7 branches of the Fig. 4.7 Lanthanoid Reaction Wheel, and why early actinoids have lower IE than early lanthanoids.

1. The Lanthanoids ($4f$ Series) — Complete NCERT Table 4.9 (Section 4.5)

$Z$NameSym$\text{Ln}$$\text{Ln}^{2+}$$\text{Ln}^{3+}$$\text{Ln}^{4+}$$r(\text{Ln})$ pm$r(\text{Ln}^{3+})$ pm
57LanthanumLa$5d^1 6s^2$$5d^1$$4f^0$–187106
58CeriumCe$4f^1 5d^1 6s^2$$4f^2$$4f^1$$4f^0$183103
59PraseodymiumPr$4f^3 6s^2$$4f^3$$4f^2$$4f^1$182101
60NeodymiumNd$4f^4 6s^2$$4f^4$$4f^3$$4f^2$18199
61PromethiumPm$4f^5 6s^2$$4f^5$$4f^4$–18198
62SamariumSm$4f^6 6s^2$$4f^6$$4f^5$–18096
63EuropiumEu$4f^7 6s^2$$4f^7$$4f^6$–19995
64GadoliniumGd$4f^7 5d^1 6s^2$$4f^7 5d^1$$4f^7$–18094
65TerbiumTb$4f^9 6s^2$$4f^9$$4f^8$$4f^7$17892
66DysprosiumDy$4f^{10} 6s^2$$4f^{10}$$4f^9$$4f^8$17791
67HolmiumHo$4f^{11} 6s^2$$4f^{11}$$4f^{10}$–17689
68ErbiumEr$4f^{12} 6s^2$$4f^{12}$$4f^{11}$–17588
69ThuliumTm$4f^{13} 6s^2$$4f^{13}$$4f^{12}$–17487
70YtterbiumYb$4f^{14} 6s^2$$4f^{14}$$4f^{13}$–17386
71LutetiumLu$4f^{14} 5d^1 6s^2$–$4f^{14}$––86

NCERT Table 4.9 (core $[\text{Xe}]$ omitted). Notice only 4 atoms place an electron in $5d^1$: $\text{La}, \text{Ce}, \text{Gd}, \text{Lu}$. Notice the metallic radius bump at $\text{Eu}\ (199\text{ pm})$ and smooth $\text{Ln}^{3+}$ contraction ($106 \to 86\text{ pm}$).

  • Oxidation States (4.5.3): Predominantly $+3$. Special $+2$ & $+4$ states occur for noble $f^0, f^7, f^{14}$ configurations: $\text{Ce}^{4+}$ ($f^0$) is a strong analytical oxidant ($E^\circ = +1.74\text{ V}$; slow water oxidation makes it useful!), $\text{Eu}^{2+}$ ($f^7$) & $\text{Yb}^{2+}$ ($f^{14}$) are strong reducing agents, and $\text{Tb}^{4+}$ ($f^7$) is an oxidant. $\text{Pr, Nd, Tb, Dy}$ also show $+4$ only in oxides ($\text{MO}_2$).
  • Physical, Magnetic & Ionisation Facts (4.5.4):
    • Silvery white soft metals; tarnish rapidly in air; hardness rises with $Z$ ($\text{Sm}$ is steel-hard; M.P. $1000\text{–}1200\text{ K}$, except $\text{Sm}$ melts at $1623\text{ K}$).
    • Trivalent ions are coloured (both solid & aqueous) due to $f\text{–}f$ transitions, except $f^0$ ($\text{La}^{3+}$) and $f^{14}$ ($\text{Lu}^{3+}$) which are colourless & diamagnetic (all other $\text{Ln}^{3+}$ are paramagnetic!).
    • Ionisation Enthalpies: $\Delta_i H_1 \approx 600$ and $\Delta_i H_2 \approx 1200\text{ kJ mol}^{-1}$ (comparable to $\text{Ca}$!). Third IE shows sharp dips (low values) at $\text{La}$ ($f^0$), $\text{Gd}$ ($f^7$), and $\text{Lu}$ ($f^{14}$).
    • Reactivity & Compounds: Earlier members behave like $\text{Ca}$, later members like $\text{Al}$. $E^\circ(\text{Ln}^{3+}/\text{Ln})$ lies between $-2.2$ and $-2.4\text{ V}$ (except $\text{Eu} = -2.0\text{ V}$). Heating with carbon gives carbides $\text{Ln}_3\text{C}, \text{Ln}_2\text{C}_3, \text{LnC}_2$. Hydroxides $\text{Ln(OH)}_3$ are definite basic compounds (like alkaline earth hydroxides), with basicity decreasing from $\text{La(OH)}_3$ to $\text{Lu(OH)}_3$.
  • Uses: Mischmetall ($\approx 95\%$ lanthanoid metal + $\approx 5\%$ iron + traces of S, C, Ca, Al) is alloyed with $\text{Mg}$ to produce bullets, shells, and lighter flint. Mixed lanthanoid oxides serve as petroleum-cracking catalysts; individual oxides are used as phosphors in television screens and fluorescing surfaces.
Ln burns in O₂ Ln₂O₃ Δ with S Ln₂S₃ Δ with N₂ LnN C, 2773 K LnC₂ (carbides) with H₂O Ln(OH)₃ + H₂↑ halogens (X₂) LnX₃ with acids Ln³⁺(aq) + H₂↑

NCERT Figure 4.7: Summary of the 7 signature chemical reactions of the lanthanoids ($\text{Ln}$).

2. The Actinoids ($5f$ Series) — Complete NCERT Tables 4.10 & 4.11 (Section 4.6)

All 15 actinoids ($\text{Ac}\ 89$ to $\text{Lr}\ 103$) are radioactive, with later elements having very short half-lives (sometimes mere minutes/seconds, prepared in nanogram quantities):

$Z$NameSym$\text{M}$$\text{M}^{3+}$$\text{M}^{4+}$$r(\text{M}^{3+})$ pm$r(\text{M}^{4+})$ pm
89ActiniumAc$6d^1 7s^2$$5f^0$–111–
90ThoriumTh$6d^2 7s^2$$5f^1$$5f^0$–99
91ProtactiniumPa$5f^2 6d^1 7s^2$$5f^2$$5f^1$–96
92UraniumU$5f^3 6d^1 7s^2$$5f^3$$5f^2$10393
93NeptuniumNp$5f^4 6d^1 7s^2$$5f^4$$5f^3$10192
94PlutoniumPu$5f^6 7s^2$$5f^5$$5f^4$10090
95AmericiumAm$5f^7 7s^2$$5f^6$$5f^5$9989
96CuriumCm$5f^7 6d^1 7s^2$$5f^7$$5f^6$9988
97BerkeliumBk$5f^9 7s^2$$5f^8$$5f^7$9887
98CaliforniumCf$5f^{10} 7s^2$$5f^9$$5f^8$9886
99EinsteiniumEs$5f^{11} 7s^2$$5f^{10}$$5f^9$––
100FermiumFm$5f^{12} 7s^2$$5f^{11}$$5f^{10}$––
101MendeleviumMd$5f^{13} 7s^2$$5f^{12}$$5f^{11}$––
102NobeliumNo$5f^{14} 7s^2$$5f^{13}$$5f^{12}$––
103LawrenciumLr$5f^{14} 6d^1 7s^2$$5f^{14}$$5f^{13}$––

NCERT Table 4.10 (core $[\text{Rn}]$ omitted). Notice the steeper Actinoid Contraction ($\text{U}^{3+}\ 103 \to \text{Cf}^{3+}\ 98$; $\text{Th}^{4+}\ 99 \to \text{Cf}^{4+}\ 86\text{ pm}$) caused by even weaker shielding of $5f$ electrons.

Complete NCERT Table 4.11 — Oxidation States of Actinoids

AcThPaUNpPuAmCmBkCfEsFmMdNoLr
343,4,53,4,5,63,4,5,6,73,4,5,6,73,4,5,63,43,4333333
  • Structural & Magnetic Differences (4.6.4): Actinoids are silvery metals with greater structural variability than lanthanoids due to irregularities in metallic radii. Their magnetic properties are more complex; though trends parallel lanthanoids, actinoid magnetic susceptibilities are generally lower.
  • Why Early Actinoids Have Lower Ionisation Enthalpies Than Early Lanthanoids: $5f$ electrons penetrate less into the inner core and are shielded more effectively from nuclear charge than $4f$ electrons → hence outer $5f, 6d, 7s$ electrons are less firmly held and readily available for bonding (giving oxidation states up to $+7$!).
  • Chemical Behaviour: Highly reactive (especially finely divided); boiling water gives oxide + hydride; $\text{HCl}$ attacks all actinoids, whereas $\text{HNO}_3$ has little effect due to a protective oxide layer; alkalies have no action. The second half of actinoids ($\text{Cm}$–$\text{Lr}$) closely resembles lanthanoids (almost exclusively $+3$).
  • Practical Impact: Although actinoid contraction is steeper element-to-element, lanthanoid contraction has far greater practical significance because the chemistry of post-actinoid superheavy elements is barely known!

Interactive Lab 4: $f$-Block Key Ion & Anomaly Inspector

Inspect the highest-yield board exam lanthanoid & actinoid ions and why each breaks the standard $+3$ rule.

Tables 4.9–4.11
Electronic Config
[Xe] 4f⁰
Redox Behaviour
Strong Oxidant (+1.74 V)
Colour & Magnetism
Colourless · Diamagnetic
$\text{Ce}^{4+}$ ($Z=58$): Attains noble-gas $[\text{Xe}]\,4f^0$ configuration! Yet its strong tendency to revert to $\text{Ce}^{3+}$ ($E^\circ = +1.74\text{ V}$) makes $\text{Ce(IV)}$ an invaluable analytical oxidising reagent (its reaction with water is kinetically slow).

3. Lanthanoids vs Actinoids & Applications of $d$- and $f$-Block Elements (Section 4.7)

FeatureLanthanoids ($4f$: $\text{Ce}$–$\text{Lu}$)Actinoids ($5f$: $\text{Th}$–$\text{Lr}$)
Oxidation StatesPredominantly $+3$; limited $+2, +4$Wide range: $+3$ to $+7$ ($\text{Np, Pu}$)
RadioactivityAll non-radioactive except $\text{Pm}$All are radioactive
OxocationsDo NOT form oxocationsForm $\text{UO}_2^{2+}, \text{PuO}_2^{2+}, \text{UO}^+$
Complex FormationLower tendency to form complexesMuch greater tendency to form complexes
Contraction & ImpactWeaker shielding ($4f$); huge impact on $4d/5d$Even steeper contraction ($5f$); less practical impact
  • Structural & Coinage Uses (Section 4.7): Iron & steels remain backbone construction materials ($\text{FeO}$ reduced with coke). $\text{TiO}_2$ is the premier white pigment; $\text{MnO}_2$ drives dry cells; $\text{Zn}$ & $\text{Ni/Cd}$ drive batteries. Group 11 coinage metals: UK “copper” coins are copper-coated steel, and “silver” UK coins are a $\text{Cu/Ni}$ alloy!
  • Catalysis & Photography (Section 4.7): $\text{V}_2\text{O}_5$ ($\text{SO}_2 \to \text{SO}_3$, Contact Process); $\text{TiCl}_4 + \text{Al(CH}_3)_3$ (Ziegler–Natta catalyst for polythene); $\text{Fe}$ (Haber Process); $\text{Ni}$ (fat hydrogenation); $\text{PdCl}_2$ (Wacker process: ethyne/ethene $\to$ ethanal); $\text{Ni}$ complexes (polymerisation of alkynes & organic compounds such as benzene); $\text{AgBr}$ (light-sensitive photographic film).

Cerium ($\text{Ce}, Z = 58$) — because $\text{Ce}^{4+}$ attains the stable noble-gas configuration $[\text{Xe}]\,4f^0$. (Terbium, $\text{Tb}$, also exhibits $+4$ via half-filled $[\text{Xe}]\,4f^7$.)

Page 7 of 8 · Active Recall & Board PracticeIntext 4.1–4.10 + Key Exercises

Rev

Active Recall · Flip-Cards, 5-Question Quiz, All 10 Intext & Board Exercises

Revision Arena: Flip-Cards, Quiz, Intext 4.1–4.10 & High-Yield Exercises

1. Active-Recall Board Flip-Cards (Tap to Reveal)

2. Quick 5-Question Concept Check Quiz

Chapter 4 Diagnostic Quiz

Score: 0 / 5

1. Which of the following $3d$ ions is colourless in aqueous solution?

$\text{Sc}^{3+}$ has a $3d^0$ configuration (zero $d$-electrons), so no $d\text{–}d$ transition is possible → colourless! ($\text{Ti}^{3+}$ purple, $\text{V}^{3+}$ green, $\text{Cu}^{2+}$ blue.)

2. Why is $\text{HCl}$ NEVER used to acidify $\text{KMnO}_4$ in volumetric titrations?

$\text{KMnO}_4$ oxidises chloride ions ($\text{Cl}^-$) from $\text{HCl}$ into chlorine gas ($\text{Cl}_2$), consuming extra $\text{KMnO}_4$ and ruining the titration. Dilute $\text{H}_2\text{SO}_4$ is used instead.

3. Which $4d$ element has the unique ground-state electronic configuration $[\text{Kr}]\,4d^{10} 5s^0$?

Palladium ($\text{Pd}, Z=46$) is the ONLY transition element in Table 4.1 with zero outer $s$ electrons ($[\text{Kr}]\,4d^{10} 5s^0$).

4. What is the approximate composition of Mischmetall?

Mischmetall contains $\approx 95\%$ lanthanoid metal, $\approx 5\%$ iron, and traces of $\text{S, C, Ca, Al}$ — used in $\text{Mg}$-based alloys for bullets, shells, and lighter flint.

5. When $\text{KMnO}_4$ is heated strongly to $513\text{ K}$, what products are formed?

$2\text{KMnO}_4 \xrightarrow{513\text{ K}} \text{K}_2\text{MnO}_4 + \text{MnO}_2 + \text{O}_2$.

3. All 10 NCERT Intext Practice Solutions (4.1–4.10)

Intext 4.1 (Silver as a Transition Element): Even though neutral $\text{Ag}$ has a full $4d^{10}$ subshell ($4d^{10}5s^1$), why is it classified as a transition metal? Solution: Silver exhibits a $+2$ oxidation state (e.g., $\text{AgF}_2$) where $\text{Ag}^{2+}$ has an incompletely filled $4d^9$ subshell, satisfying the IUPAC definition.
Intext 4.2 (Lowest $\Delta_a H^\circ$ at Zinc): Why does $\text{Zn}$ have the smallest enthalpy of atomisation ($126\text{ kJ mol}^{-1}$) in the $3d$ series? Solution: $\text{Zn}$ ($3d^{10}4s^2$) has zero unpaired $3d$ electrons, so $3d$ electrons do not participate in metallic bonding, leaving the weakest interatomic bond.
Intext 4.3 (Most Frequent $+1$ State): Which $3d$ transition metal most commonly shows the $+1$ oxidation state and why? Solution: Copper ($\text{Cu}, 3d^{10}4s^1$) — losing its single $4s^1$ electron yields the stable closed-subshell $\text{Cu}^+$ ($3d^{10}$) configuration.
Intext 4.4 (High States in Oxides vs Fluorides): Why is the highest oxidation state of $\text{Mn}$ $+7$ in oxides ($\text{Mn}_2\text{O}_7$) but only $+4$ in fluorides ($\text{MnF}_4$)? Solution: Oxygen forms multiple ($p\pi\text{–}d\pi$) bonds with $\text{Mn}$, stabilising $+7$, whereas fluorine forms only single covalent bonds.
Intext 4.5 (Irregular $E^\circ(\text{M}^{2+}/\text{M})$ Trend): Explain why $E^\circ(\text{M}^{2+}/\text{M})$ does not vary smoothly across the $3d$ series. Solution: It reflects irregular variations in $\text{IE}_1 + \text{IE}_2$ (exchange-energy stability of $d^5, d^{10}$), atomisation enthalpy $\Delta_a H^\circ$, and hydration enthalpy $\Delta_{\text{hyd}} H^\circ$.
Intext 4.6 (High $E^\circ(\text{Mn}^{3+}/\text{Mn}^{2+}) = +1.57\text{ V}$): Why is $\text{Mn}^{3+}/\text{Mn}^{2+}$ much more positive than $\text{Cr}^{3+}/\text{Cr}^{2+}$ ($-0.41\text{ V}$) and $\text{Fe}^{3+}/\text{Fe}^{2+}$ ($+0.77\text{ V}$)? Solution: Oxidising $\text{Mn}^{2+}$ ($3d^5$) breaks a very stable half-filled shell (huge $\Delta_i H_3^\circ$), whereas forming $\text{Cr}^{3+}$ ($t_{2g}^3$) or $\text{Fe}^{3+}$ ($3d^5$) gains extra stability.
Intext 4.7 (Spin-Only Moment for $Z = 27$): Calculate $\mu$ for a divalent aqueous ion whose atomic number is $27$. Solution: $Z = 27$ is $\text{Co}$ ($[\text{Ar}]\,3d^7 4s^2$) → $\text{Co}^{2+}$ is $3d^7$, which has $n = 3$ unpaired electrons → $\mu = \sqrt{3(3+2)} = \sqrt{15} = \mathbf{3.87\text{ BM}}$.
Intext 4.8 (Instability of $\text{Cu}^+$ in Water): Account for the aqueous instability of cuprous ($\text{Cu}^+$) ions. Solution: $\text{Cu}^+$ disproportionates ($2\text{Cu}^+ \to \text{Cu}^{2+} + \text{Cu}$) because the much more negative hydration enthalpy of $\text{Cu}^{2+}$ more than offsets the second ionisation enthalpy of $\text{Cu}$.
Intext 4.9 (Actinoid vs Lanthanoid Contraction): Why is the element-to-element radius contraction larger across actinoids than across lanthanoids? Solution: $5f$ electrons provide even poorer shielding of nuclear charge than $4f$ electrons, pulling outer shells inward more strongly with each added proton.
Intext 4.10 (Maximum Actinoid Oxidation State): Which actinoids reach the highest oxidation state, and how do early actinoids compare? Solution: Neptunium ($\text{Np}$) and Plutonium ($\text{Pu}$) achieve the maximum state of $+7$ (rising steadily from $\text{Ac}\ (+3), \text{Th}\ (+4), \text{Pa}\ (+5), \text{U}\ (+6)$ to $\text{Np, Pu}\ (+7)$).

4. High-Yield Board Exercise Solutions (NCERT Exercises 4.17, 4.21 & 4.38)

A more negative $E^\circ$ favours the $+3$ state, while a strongly positive $E^\circ$ favours the $+2$ state. Hence stability of $\text{M}^{3+}$ follows $\text{Cr}^{3+} \gt \text{Fe}^{3+} \gt \text{Mn}^{3+} \gt \text{Co}^{3+}$ (making $\text{Cr}^{2+}$ the strongest reductant and $\text{Co}^{3+}/\text{Mn}^{3+}$ powerful oxidants in water).

  • (ii) $\text{Co(II)} \to \text{Co(III)}$: Strong-field complexing ligands ($\text{NH}_3, \text{CN}^-$) give $\text{Co(III)}$ ($d^6$, low-spin $t_{2g}^6$) a huge crystal field stabilisation energy (CFSE) that overcomes $\Delta_i H_3^\circ$, shifting $E^\circ$ sharply downward so even atmospheric $\text{O}_2$ oxidises $\text{Co(II)}$.
  • (iii) $d^1$ Instability: Losing that lone $d^1$ electron produces a stable noble-gas $d^0$ core (e.g., $\text{Ti}^{3+} \to \text{Ti}^{4+}$), so $d^1$ ions readily oxidise or disproportionate.
  • $\text{K}_4[\text{Mn(CN)}_6]$ ($2.2\text{ BM} \approx 1\text{ unpaired }e^-$): $\text{Mn}^{2+}$ ($3d^5$) with strong-field $\text{CN}^-$ pairs up → inner-orbital octahedral ($d^2sp^3$, low spin).
  • $[\text{Fe(H}_2\text{O})_6]^{2+}$ ($5.3\text{ BM} \approx 4\text{ unpaired }e^-$): $\text{Fe}^{2+}$ ($3d^6$) with weak-field $\text{H}_2\text{O}$ stays unpaired → outer-orbital octahedral ($sp^3d^2$, high spin).
  • $\text{K}_2[\text{MnCl}_4]$ ($5.9\text{ BM} = 5\text{ unpaired }e^-$): $\text{Mn}^{2+}$ ($3d^5$) with 4 weak $\text{Cl}^-$ ligands → tetrahedral ($sp^3$, high spin).

5. Exam-Ready Mastery Checklist

Page 8 of 8 · One-Page Board Revision SheetComplete Chapter 4

Sum

Final Revision · 6-Card Cheat Sheet, Key Benchmarks & 12-Term Glossary

Chapter 4 Complete Summary & High-Yield Cheat Sheet

1. $d$-Block Basics & Configurations

  • Four series: $3d$ ($\text{Sc–Zn}$), $4d$ ($\text{Y–Cd}$), $5d$ ($\text{La, Hf–Hg}$), $6d$ ($\text{Ac, Rf–Cn}$).
  • Exceptions: $\text{Cr}\ (3d^5 4s^1)$, $\text{Cu}\ (3d^{10} 4s^1)$, $\text{Pd}\ (4d^{10} 5s^0)$, $\text{Pt}\ (5d^9 6s^1)$, $\text{Au}\ (5d^{10} 6s^1)$.
  • $\text{Zn, Cd, Hg}$ have full $d^{10}$ in atom & ion → NOT transition elements.

2. Physical, Radii & IE Trends

  • Max M.P. overall: $\text{W}$; dips at $\text{Mn, Tc}$. Max $\Delta_a H^\circ$ in $3d$: $\text{V}\ (515)$; min: $\text{Zn}\ (126\text{ kJ mol}^{-1})$.
  • $4d \approx 5d$ radii ($\text{Zr}\ 160 \approx \text{Hf}\ 159\text{ pm}$) due to Lanthanoid Contraction.
  • Exchange-energy spikes: $\text{IE}_2$ at $\text{Cr, Cu}$; $\text{IE}_3$ at $\text{Mn, Zn}$.

3. Oxidation States, $E^\circ$ & Stability

  • Max state in $3d$: $\text{Mn}\ (+7)$ in oxides; Group 6 $\text{Mo(VI), W(VI)} \gt \text{Cr(VI)}$.
  • Only $\text{Cu}$ has positive $E^\circ(\text{M}^{2+}/\text{M}) = +0.34\text{ V}$; $2\text{Cu}^+ \to \text{Cu}^{2+} + \text{Cu}$.
  • Strong oxidants: $\text{Mn}^{3+}\ (+1.57\text{ V}), \text{Co}^{3+}\ (+1.97\text{ V})$. Strong reductant: $\text{Cr}^{2+}\ (-0.41\text{ V})$.

4. Magnetism, Colour & Properties

  • $\mu = \sqrt{n(n+2)}\text{ BM}$ (max $5.92\text{ BM}$ for $d^5$ $\text{Mn}^{2+}, \text{Fe}^{3+}$).
  • Colourless ions: $d^0$ ($\text{Sc}^{3+}, \text{Ti}^{4+}$) & $d^{10}$ ($\text{Cu}^+, \text{Zn}^{2+}$).
  • Catalysts ($\text{V}_2\text{O}_5, \text{Fe}, \text{Ni}, \text{Fe}^{3+}$), interstitials ($\text{TiC}, \text{VH}_{0.56}$), alloys (brass, bronze, steel).

5. $\text{K}_2\text{Cr}_2\text{O}_7$ & $\text{KMnO}_4$

  • $\text{CrO}_4^{2-}$ (yellow, base) $\rightleftharpoons \text{Cr}_2\text{O}_7^{2-}$ (orange, acid; $126^\circ, 163/179\text{ pm}$); $E^\circ = +1.33\text{ V}$.
  • $\text{KMnO}_4$: $513\text{ K} \to \text{K}_2\text{MnO}_4 + \text{MnO}_2 + \text{O}_2$; $\text{I}^- \to \text{I}_2$ (acid) vs $\text{IO}_3^-$ (neutral/alkaline).
  • Acidify $\text{KMnO}_4$ with dil. $\text{H}_2\text{SO}_4$, NEVER $\text{HCl}$.

6. Lanthanoids, Actinoids & Uses

  • Lanthanoids: $+3$ dominant; $\text{Ce}^{4+}\ (f^0)$, $\text{Eu}^{2+}\ (f^7)$, $\text{Yb}^{2+}\ (f^{14})$; Mischmetall ($\approx 95\%\text{ Ln} + 5\%\text{ Fe}$).
  • Actinoids: all radioactive; $+3$ to $+7$ ($\text{Np, Pu}$); steeper $5f$ contraction; form oxocations ($\text{UO}_2^{2+}$).
  • Catalysts: Ziegler–Natta ($\text{TiCl}_4 + \text{Al(CH}_3)_3$), Wacker ($\text{PdCl}_2$), $\text{AgBr}$ (photography).

Key Numbers & Exam Benchmarks

Copper Anomaly$E^\circ(\text{Cu}^{2+}/\text{Cu}) = +0.34\text{ V}$ (Cost $+3042$, Hyd $-2121\text{ kJ mol}^{-1}$)
Peak Spin-Only $\mu$$\text{Mn}^{2+}/\text{Fe}^{3+}\ (n=5): \sqrt{35} = 5.92\text{ BM}$
Dichromate Geometry$\angle\text{Cr–O–Cr} = 126^\circ$; terminal $163\text{ pm}$; bridging $179\text{ pm}$
$\text{KMnO}_4$ Potentials$+1.52\text{ V}$ (acid, $5e^-$), $+1.69\text{ V}$ (neut., $3e^-$), $+0.56\text{ V}$ (alk., $1e^-$)
$\text{KMnO}_4$ Thermal & Sol.Decomposes at $513\text{ K}$; solubility $6.4\text{ g}/100\text{ g}$ water ($293\text{ K}$)
Lanthanoid Contraction$r(\text{Ln}^{3+}): \text{La}^{3+}\ 106\text{ pm} \to \text{Lu}^{3+}\ 86\text{ pm}$; $\text{Zr}\ 160 \approx \text{Hf}\ 159\text{ pm}$

12-Term Quick Glossary

Transition Element: $d$-block element with an incompletely filled $d$-subshell in its ground state or any common oxidation state.
Enthalpy of Atomisation ($\Delta_a H^\circ$): Energy required to break $1\text{ mol}$ of metallic solid into gaseous free atoms.
Exchange Energy: Stabilising energy proportional to pairs of parallel-spin electrons in degenerate orbitals.
Disproportionation: Simultaneous oxidation and reduction of an intermediate oxidation state (e.g., $2\text{Cu}^+ \to \text{Cu}^{2+} + \text{Cu}$).
Spin-Only Magnetic Moment: $\mu = \sqrt{n(n+2)}\text{ BM}$ calculated solely from unpaired electron spin count $n$.
$d\text{–}d$ Transition: Absorption of visible light exciting an electron from a lower to a higher crystal-field $d$-orbital.
LMCT (Charge Transfer): Intense ligand-to-metal electron transfer explaining deep colour of $d^0$ ions ($\text{MnO}_4^-, \text{Cr}_2\text{O}_7^{2-}$).
Interstitial Compound: Hard, high-melting, non-stoichiometric compound formed by $\text{H, C, N, B}$ trapped in metal crystal voids.
Alloy: Homogeneous solid solution of two or more metals with comparable atomic radii (within $\approx 15\%$).
Lanthanoid Contraction: Steady decrease in atomic/ionic radii from $\text{La}$ to $\text{Lu}$ due to poor shielding by $4f$ electrons.
Mischmetall: Pyrophoric alloy of $\approx 95\%$ lanthanoids, $\approx 5\%$ iron, and traces of $\text{S, C, Ca, Al}$.
Actinoid Contraction: Steeper shrinkage across $\text{Ac}$–$\text{Lr}$ due to even poorer shielding by diffuse $5f$ electrons.
🔥 Learnosha Repeats Radar

High-Frequency The d- & f-Block Elements Board Repeats

Authentic question patterns appearing repeatedly in past CBSE board examinations.

Practice All PYQs ➔
⚡ 4× Repeated • 1 Mark
Repeated in 2024, 2023
Which property of transition metals enables them to behave as catalysts ? (A) Variable oxidation states (B) Alloy formation (C) High ionisation enthalpy (D) High melting point
⚡ 3× Repeated • 1 Mark
Repeated in 2026, 2023
Which of the following transition metals shows $+1$ and $+2$ oxidation states ? (A) $\text{Mn}$ (B) $\text{Zn}$ (C) $\text{Cu}$ (D) $\text{Sc}$
⚡ 3× Repeated • 1 Mark
Repeated in 2026
Assertion (A) : Zinc, cadmium and mercury are not considered as transition elements. Reason (R) : These elements have completely filled orbitals in their ground state as well as in their common oxidation states.
⚡ 3× Repeated • 1 Mark
Repeated in 2026
Which of the following elements exhibits maximum number of oxidation states ? (A) Scandium (B) Zinc (C) Manganese (D) Cobalt
⚡ 3× Repeated • 3 Marks
Repeated in 2026
(b) (i) Why is $\text{Zn}$ a non-transition element ?
⚡ 3× Repeated • 3 Marks
Repeated in 2026
(c) Why is there not much change in the atomic radius of the transition metals with the increase in atomic number ?
🎯 Learnosha PYQ Archive

Authentic The d- & f-Block Elements Board Questions

Strict past CBSE questions with official step marking schemes.

Practice All The d- & f-Block Elements PYQs ➔
CBSE 2026 • Q32 • 5 Marks
(a) (i) From the given data of $E^\circ$ values, answer the following questions : [Table showing $E^\circ_{\text{M}^{2+}/\text{M}}$ values for V (-1.18), Cr (-0.91), Mn (-1.18), Fe (-0.44), Co (-0.28), Ni (-0.25), Cu (+0.34)] (I) Why $E^\circ_{\text{M}^{2+}/\text{M}}$ show irregular trend in the above values ? (II) Why is $E^\circ_{\text{Cu}^{2+}/\text{Cu}}$ value exceptionally positive ? (III) Why $E^\circ_{\text{Mn}^{2+}/\text{Mn}}$ value is highly negative ? (ii) Write the ionic equations for the oxidising action of potassium permanganate for its reaction with $\text{I}^-$ in both acidic and alkaline solutions.
💡 Solution Queued for Verification
Official CBSE marking scheme verified solution is queued. You can test your answer and simulate exam conditions in the Interactive Hub ➔
CBSE 2026 • Q32 • 5 Marks
(b) Answer the following questions : (i) Name a member of the lanthanoid series (I) which exhibits $+4$ oxidation state (II) which exhibits $+2$ oxidation state. (ii) Why transition metals act as good catalyst ? (iii) Why $\text{Cr}$ has higher melting point than $\text{Mn}$ ? (iv) What happens when acidic solution of potassium permanganate is allowed to stand for sometime ? Give the equation involved. What is this type of reaction called ?
💡 Solution Queued for Verification
Official CBSE marking scheme verified solution is queued. You can test your answer and simulate exam conditions in the Interactive Hub ➔
CBSE 2026 • Q33 • 5 Marks
(a) (i) From the given data of $E^{\circ}$ values, answer the following questions : | $E^{\circ}_{M^{2+}/M}$ | V | Cr | Mn | Fe | Co | Ni | Cu | |---|---|---|---|---|---|---|---| | | $-1.18$ | $-0.91$ | $-1.18$ | $-0.44$ | $-0.28$ | $-0.25$ | $+0.34$ | (I) Why $E^{\circ}_{M^{2+}/M}$ show irregular trend in the above values ? (II) Why is $E^{\circ}_{Cu^{2+}/Cu}$ value exceptionally positive ? (III) Why $E^{\circ}_{Mn^{2+}/Mn}$ value is highly negative ? (ii) Write the ionic equations for the oxidising action of potassium permanganate for its reaction with $\text{I}^{-}$ in both acidic and alkaline solutions. OR (b) Answer the following questions : (i) Name a member of the lanthanoid series (I) which exhibits $+4$ oxidation state (II) which exhibits $+2$ oxidation state. (ii) Why transition metals act as good catalyst ? (iii) Why $\text{Cr}$ has higher melting point than $\text{Mn}$ ? (iv) What happens when acidic solution of potassium permanganate is allowed to stand for sometime ? Give the equation involved. What is this type of reaction called ?
💡 Solution Queued for Verification
Official CBSE marking scheme verified solution is queued. You can test your answer and simulate exam conditions in the Interactive Hub ➔
CBSE 2026 • Q31 • 5 Marks
31. (a) (i) From the given data of $E^{\circ}$ values, answer the following questions : | $E^{\circ}_{M^{2+}/M}$ | V | Cr | Mn | Fe | Co | Ni | Cu | |---|---|---|---|---|---|---|---| | | $-1.18$ | $-0.91$ | $-1.18$ | $-0.44$ | $-0.28$ | $-0.25$ | $+0.34$ | (I) Why $E^{\circ}_{M^{2+}/M}$ show irregular trend in the above values ? (II) Why is $E^{\circ}_{Cu^{2+}/Cu}$ value exceptionally positive ? (III) Why $E^{\circ}_{Mn^{2+}/Mn}$ value is highly negative ? (ii) Write the ionic equations for the oxidising action of potassium permanganate for its reaction with $\text{I}^{-}$ in both acidic and alkaline solutions. OR (b) Answer the following questions : (i) Name a member of the lanthanoid series (I) which exhibits $+4$ oxidation state (II) which exhibits $+2$ oxidation state. (ii) Why transition metals act as good catalyst ? (iii) Why $\text{Cr}$ has higher melting point than $\text{Mn}$ ? (iv) What happens when acidic solution of potassium permanganate is allowed to stand for sometime ? Give the equation involved. What is this type of reaction called ?
💡 Solution Queued for Verification
Official CBSE marking scheme verified solution is queued. You can test your answer and simulate exam conditions in the Interactive Hub ➔
CBSE 2026 • Q31 • 5 Marks
(a) (i) What are transition elements ? Why do transition metals have high melting points and form coloured compounds ? (ii) What is lanthanoid contraction ? Write two of its consequences.
💡 Solution Queued for Verification
Official CBSE marking scheme verified solution is queued. You can test your answer and simulate exam conditions in the Interactive Hub ➔
CBSE 2026 • Q31 • 5 Marks
(b) (i) Consider the following elements of 3d series : Sc Ti V Cr Mn Fe Co Ni Cu Zn Answer the following : (I) Which element shows the maximum number of oxidation states ? (II) Which element is colourless in $+3$ oxidation state ? (III) Which element is a strong reducing agent in $+2$ oxidation state ? Give a reason in support of your answer in each case. (ii) Write two differences between the chemistry of lanthanoids and actinoids.
💡 Solution Queued for Verification
Official CBSE marking scheme verified solution is queued. You can test your answer and simulate exam conditions in the Interactive Hub ➔