BITSAT 2013 • Q1
• 3 Marks
The given lens is broken into four parts and rearranged as shown. If the initial focal length is f then after rearrangement the equivalent focal length is –
(A) f 1 2
3 4
in air
(B) f / 2
(C) f / 4
(D) 4 f
💡 View Verified Solution & Step Rubric
Cutting a lens in transverse direction
BITSAT 2015 • Q2
• 3 Marks
A ray parallel to principal axis is incident at 30° from normal on concave mirror having radius of curvature R. The point on principal axis where rays are focussed is Q such that PQ is
(A) 2
R
M
30°
CQP
(B) 3
R
(C) 2
2
RR-
(D) 11
3
R æö -ç÷èø
💡 View Verified Solution & Step Rubric
From similar triangles,
BITSAT 2015 • Q3
• 3 Marks
Calculate the wavelength of light used in an interference experiment from the following data : Fringe width = 0.03 cm. Distance between the slits and eyepiece through which the interference pattern is observed is 1m. Distance between the images of the virtual source when a convex lens of focal length 16 cm is used at a distance of 80 cm from the eyepiece is 0.8 cm.
(A) 0.0006 Å
(B) 0.0006 m
(C) 600 cm
(D) 6000 Å
💡 View Verified Solution & Step Rubric
Given: fringe with b = 0.03 cm, D = 1 m = 100
BITSAT 2015 • Q4
• 3 Marks
The beam of light has three wavelengths 4144Å,4972Å and 6216 Å with a total intensity of 3.6 × 10–3 Wm2 equally distributed amongst the three wavelengths. The beam falls normally on the area 1 cm2 of a clean metallic surface of work function 2.3 eV . Assume that there is no loss of light by reflection and that each energetically capable photon ejects one electron. Calculate the number of photoelectrons liberated in 2s.
(A) 2 × 10 9
(B) 1.075 × 10 12
(C) 9 × 10 8
(D) 3.75 × 10 6
💡 View Verified Solution & Step Rubric
As we know, threshold wavelength
BITSAT 2015 • Q5
• 3 Marks
A planoconvex lens fits exactly into a planoconcave lens. Their plane surface are parallel to each other. If the lenses are made of different materials of refractive indices µ1 & µ2 and R is the radius of curvature of the curved surface of the lenses, then focal length of combination is ( )122– R µµ ( )122– R µµ+
(A) 12–
R
µµ
(B) 12
2
–
R
µµ
(C)
(D)
💡 View Verified Solution & Step Rubric
If F be the equivalent focal length, then
BITSAT 2016 • Q6
• 3 Marks
A biconvex lens has a radius of curvature of magnitude 20 cm. Which one of the following options best describe the image formed of an object of height 2 cm placed 30 cm from the lens?
(A) Virtual, upright, height = 1 cm
(B) Virtual, upright, height = 0.5 cm
(C) Real, inverted, height = 4 cm
(D) Real, inverted, height = 1cm
💡 View Official Answer & Solution Status
Official Correct Option: (C)
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
BITSAT 2016 • Q7
• 3 Marks
A ray of light of intensity I is incident on a parallel glass slab at point A as shown in diagram. It undergoes partial reflection and refraction. At each reflection, 25% of incident energy is reflected. The rays AB and A'B' undergo interference. The ratio of Imax and Imin is : A B C A ' B' C'
(A) 49 : 1
(B) 7 : 1
(C) 4 : 1
(D) 8 : 1
💡 View Official Answer & Solution Status
Official Correct Option: (A)
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
BITSAT 2016 • Q8
• 3 Marks
For the angle of minimum deviation of a prism to be equal to its refracting angle, the prism must be made of a material whose refractive index :
(A) lies between 2 and 1
(B) lies between 2 and 2
(C) is less than 1
(D) is greater than 2
💡 View Verified Solution & Step Rubric
AA Prism angle
BITSAT 2016 • Q9
• 3 Marks
A lens having focal length f and aperture of diameter d forms an image of intensity I. Aperture of diameter 2 d in central region of lens is covered by a black paper. Focal length of lens and intensity of image now will be respectively:
(A) f and 4
I
(B) 3
4
f and 2
I
(C) f and 3
4
I
(D) 2
f and 2
I
💡 View Verified Solution & Step Rubric
By covering aperture, focal length does not
BITSAT 2017 • Q10
• 3 Marks
On a hypotenuse of a right prism (30° – 60° – 90°) of refractive index 1.50, a drop of liquid is placed as shown in figure. Light is allowed to fall normally on the short face of the prism. In order that the ray of light may get totally reflected, the maximum value of refractive index is :
(A) 1.30
(B) 1.47
(C) 1.20
(D) 1.25
💡 View Verified Solution & Step Rubric
Cmax = 60°
BITSAT 2017 • Q11
• 3 Marks
A telescope has an objective lens of 10 cm d i a m e t e r a n d i s s i t u a t e d a t a d i s t a nc e o f o n e kilometer from two objects. The minimum distance between these two objects, which can be resolved by the telescope, when the mean wavelength of light is 5000 Å, is of the order of
(A) 5 cm
(B) 0.5 m
(C) 5 m
(D) 5 mm
💡 View Official Answer & Solution Status
Official Correct Option: (D)
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
BITSAT 2019 • Q12
• 3 Marks
You are asked to design a shaving mirror assuming that a person keeps it 10 cm from his face and views the magnified image of the face at the closest comfortable distance of 25 cm. The radius of curvature of the mirror would then be :
(A) 60 cm
(B) –24 cm
(C) – 60 cm
(D) 24 cm
💡 View Verified Solution & Step Rubric
Concave morror is used as a shaving mirror.
BITSAT 2023 • Q13
• 3 Marks
In a reflecting telescope, a secondary mirror is used to:
(A) reduce the problem of mechanical support
(B) remove spherical aberration
(C) make chromatic aberration zero
(D) move the eyepiece outside the telescopic tube
💡 View Verified Solution & Step Rubric
Solution:
To\redirect\the\light\that\enters\the\telescope\to\the\eyepiece\tor\camera.\The\primary\mirror\tof\a\reflecting\telescopes
gathers\the\light\and\reflects\towards\the\secondary\mirror\which\then\reflect\the\light\towards\the\eyepiece\allowing\the
observer\to\see\image.
It\has\advantage\tof\a\l
BITSAT 2024 • Q14
• 3 Marks
In normal adjustment, for a refracting telescope, the distance between objective and eye piece is 30 cm. The focal length of the objective, when the angular magnification of the telescope is 2, will be:
(A) 20 cm
(B) 30 cm
(C) 10 cm
(D) 15 cm
💡 View Official Answer & Solution Status
Official Correct Option: (A)
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
BITSAT 2024 • Q15
• 3 Marks
If the distance between object and its two times magnified virtual image produced by a curved mirror is 15 cm, the focal length of the mirror must be:
(A) 10/3 cm
(B) −12 cm
(C) −10 cm
(D) 15 cm
💡 View Verified Solution & Step Rubric
Since, image is magnified. So, it is a concave mirror.
BITSAT 2025 • Q16
• 3 Marks
A given ray of light suffers minimum deviation in an equilateral prism P. Additional prisms Q and R of identical shape and of same material as that of P are now combined as shown in figure.
The ray will now suffer
(A) greater deviation
(B) no deviation
(C) same deviation as before
(D) total internal reflection
💡 View Verified Solution & Step Rubric
When ray suffers minimum deviation, it becomes parallel to the base of prism P. Deviation remains the same.