CBSE Class 12 • PHYSICS • Chapter 7 • 86 QUESTIONS

Alternating Current Previous Year Questions

Complete archive of 86 authentic CBSE Class 12 Physics past exam questions for Alternating Current (2023–2026). Free chapterwise practice with step marking schemes and verified solutions.

⚡ Open CBT Simulator ✍️ Physics Formulas 🔥 Repeats Radar 📋 Marks Blueprint
Data Coverage Report
86 Canonical Problems • 0.0% Official Answers Verified • 24.4% Step Solutions Available
Zero Speculation Standard • Unverified marked explicitly

Authentic Examination Questions (86 Problems)

CBSE Class 12 2026 • Q1 • 3 Marks
(c) A conducting rod of length $50\text{ cm}$, with one end pivoted, is rotated with angular speed of $60\text{ rpm}$ in a uniform magnetic field of $4.0\text{ mT}$ directed perpendicular to the plane of rotation of rod. Find the emf induced in the rod. OR (a) Draw a labelled diagram of a step-up transformer. State the principle on which it works and obtain the ratio of secondary voltage to primary voltage in terms of number of turns and currents in the two coils. (b) The ratio of the number of turns in the primary to the secondary of an ideal transformer is $1 : 5$. If $5\text{ kW}$ power at $200\text{ V}$ is supplied to the primary, find (i) current in the primary, and (ii) output voltage.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q2 • 1 Mark
A resistor and an inductor of negligible resistance are connected in series to a $20\text{ V}$ ac source. If the voltage across the resistor is $12\text{ V}$, the voltage across the inductor will be (A) $6\text{ V}$ (B) $8\text{ V}$ (C) $10\text{ V}$ (D) $16\text{ V}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q3 • 1 Mark
A series LCR circuit with $R = 3\ \Omega$, $X_{\text{C}} = 4\ \Omega$, $X_{\text{L}} = 8\ \Omega$ is connected to a $220\text{ V}$, $50\text{ Hz}$ ac source. The power factor for the circuit is (A) $0.30$ (B) $0.45$ (C) $0.50$ (D) $0.60$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q4 • 5 Marks
(a) A series combination of L, C and R is connected to an a.c. source. Using a phasor diagram, derive an expression for the impedance of the circuit and phase difference between V and I. (b) Under what conditions the (i) impedance of the circuit is minimum ? (ii) Wattless current flows in the circuit ? OR (i) With the help of a labelled diagram, explain the principle, construction and working of an a.c. generator. (ii) Deduce an expression for the induced emf in the coil of the generator. (iii) If T is the time period of the rotation of the coil, at what values of T in a cycle, the emf generator is maximum ?
💡 View Verified Solution & Step Rubric

Part (a): Series LCR Circuit Analysis

Step 1 (Governing Laws & Phasor Representation): [1 Mark]

In a series LCR circuit, the current $I = I_m \sin(\omega t)$ is common to all components. The voltage across the resistor ($V_R$) is in phase with $I$, the voltage across the inductor ($V_L$) leads $I$ by $\pi/2$, and the voltage across the capacitor ($V_C$) lags $I$ by $\pi/2$.

The net voltage $V$ is the phasor sum: $\vec{V} = \vec{V_R} + \vec{V_L} + \vec{V_C}$.

Step 2 (Mathematical Derivation): [2 Marks]

From the phasor diagram, the resultant voltage $V$ is given by:

$$V = \sqrt{V_R^2 + (V_L - V_C)^2}$$

Substituting $V_R = IR$, $V_L = IX_L$, and $V_C = IX_C$:

$$V = \sqrt{(IR)^2 + (IX_L - IX_C)^2} = I \sqrt{R^2 + (X_L - X_C)^2}$$

The impedance $Z$ is defined as $Z = V/I$:

$$Z = \sqrt{R^2 + (X_L - X_C)^2} = \sqrt{R^2 + (\omega L - \frac{1}{\omega C})^2}$$

The phase difference $\phi$ between $V$ and $I$ is:

$$\tan \phi = \frac{V_L - V_C}{V_R} = \frac{X_L - X_C}{R}$$

Step 3 (Final Concluded Answer): [1 Mark]

  • (i) Impedance is minimum: When $X_L = X_C$ (Resonance condition), $Z = R$. This occurs at $\omega = \frac{1}{\sqrt{LC}}$.
  • (ii) Wattless current: Flows when the average power consumed is zero. This happens in a purely inductive or purely capacitive circuit where $\phi = \pi/2$, so $\cos \phi = 0$.

💡 EL10 Concept Insight

Think of the LCR circuit like a tug-of-war: the inductor pulls the voltage "up" and the capacitor pulls it "down." When they pull with equal strength, they cancel each other out, leaving only the resistor to resist the flow, which makes the path of least resistance (minimum impedance)!


Alternative (OR): A.C. Generator

Step 1 (Principle & Construction): [1.5 Marks]

Principle: Based on Electromagnetic Induction (Faraday's Law). When a coil rotates in a uniform magnetic field, the magnetic flux linked with it changes, inducing an emf.

Construction: Consists of a rectangular coil (armature), strong permanent magnets (field magnets), slip rings, and carbon brushes.

Step 2 (Deduction of Induced EMF): [2 Marks]

Magnetic flux $\Phi_B = \vec{B} \cdot \vec{A} = BA \cos \theta$. Since $\theta = \omega t$:

$$\Phi_B = BA \cos(\omega t)$$

By Faraday's Law, $\varepsilon = -N \frac{d\Phi_

CBSE Class 12 2026 • Q5 • 1 Mark
$110$ kW electric power is supplied to the primary coil of an ideal transformer. If the output voltage is $22$ kV, the output current will be : (A) $50$ A (B) $25$ A (C) $5$ A (D) $0.5$ A
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q6 • 2 Marks
(a) An ideal inductor consumes no electric power in an ac circuit. Explain. OR (b) Two co-axial circular identical loops A and B, carrying equal currents in the same direction are placed at some distance. If loop B is brought closer to loop A with a constant speed, what will happen to the currents in them during this process ? Give reason for your answer.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q7 • 1 Mark
Assertion (A) : In a series LCR circuit at resonance, the impedance is equal to ohmic resistance (R) in the circuit. Reason (R) : At resonance, the capacitive reactance is not equal to the inductive reactance.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q8 • 5 Marks
(a) Prove that in an ac circuit containing only a pure inductor, the voltage is ahead of the current in phase by $\frac{\pi}{2}$ radian. Hence define inductive reactance. (b) The instaneous value of a voltage (in volt) is given by $\text{E} = 140 \sin 314 \text{t}$, where $\text{t}$ is in seconds. Find : (i) rms value of the applied voltage. (ii) the frequency of ac supply.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q9 • 3 Marks
(a) Discuss the behaviour of an inductor connected to (i) a dc source, and (ii) a high frequency ac source. (b) What is the phase relation between current and voltage in an ideal inductor connected to an ac source ? Draw a phasor diagram for the circuit.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q10 • 5 Marks
(a) (i) A light bulb and an open coil inductor are connected in series across an ac source of variable frequency. How will the glow of the bulb be affected when : (I) an iron bar is inserted inside the coil, and (II) the frequency of the source is decreased ? Justify your answers. Assume that in each above case other factors remain unchanged. (ii) An ac voltage $V = 280 \sin $100\pi \text{ t}$ \text{ volt}$ is connected across a series LCR circuit in which $R = 400 \ \Omega$, $L = \frac{5}{\pi} \text{ H}$ and $C = \frac{50}{\pi} \mu\text{F}$. Taking $\sqrt{2} = 1.4$, calculate : (I) impedance of the circuit. (II) rms value of current that flows in the circuit. (III) power factor of the circuit.
💡 View Verified Solution & Step Rubric
280}{1.4} = 200 \text{ V}$. * $I_{rms} = \frac{V_{rms}}{Z
CBSE Class 12 2026 • Q11 • 3 Marks
A series combination of circuit elements X and Y is connected across an ac source. It is found that the voltage is ahead of current in phase by $\frac{\pi}{4}$ radian. When element Y is replaced by element Z, the current leads the voltage by $\frac{\pi}{4}$ radian. (a) Identify the elements X, Y and Z. (b) What will the phase angle and power factor for the circuit be if X, Y and Z were connected in series across the same ac source? What can you say about the current that flows in the circuit in this case?
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q12 • 1 Mark
An ac voltage is given as $v = 14 \sin(314t) \text{ V}$. The average and the effective value of the voltage (in V) over a cycle are respectively : (A) 14 and 7 (B) 10 and 14 (C) 0 and 10 (D) 10 and 0
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q13 • 5 Marks
(a) (i) Define the terms (I) resonant frequency, and (II) power factor of a series LCR circuit. For what value of the power factor will the power dissipated in the circuit be maximum ? (ii) An inductor of $\frac{5}{\pi}\text{ H}$, a capacitor of $\frac{50}{\pi}\text{ }\mu\text{F}$ and a resistor of $400\text{ }\Omega$ are connected in series across an ac voltage $v = 140\text{ sin}$100\pi\text{ t}$\text{ V}$. Calculate : (I) impedance of the circuit, and (II) rms value of current that flows in the circuit. (Take $\sqrt{2} = 1.4$) OR (b) (i) Draw a labelled diagram of a step-up transformer. Obtain the ratio of secondary voltage to primary voltage in terms of number of turns in the two coils. (ii) The number of turns in the primary and the secondary coil of an ideal transformer are $100$ and $5000$ respectively. If $3.3\text{ kW}$ power is supplied to the transformer at $220\text{ V}$, find (I) current in the primary coil, and (II) output voltage.
💡 View Verified Solution & Step Rubric

Solution (a)

(i) Definitions and Power Factor: [1 Mark]

  • Resonant Frequency: The frequency of the applied AC voltage at which the inductive reactance equals the capacitive reactance ($X_L = X_C$), causing the impedance to be minimum and current to be maximum.
  • Power Factor: The cosine of the phase angle ($\phi$) between the applied voltage and the current in an AC circuit, given by $\cos \phi = \frac{R}{Z}$.
  • Maximum Power Dissipation: Power dissipation is maximum when $\cos \phi = 1$ (i.e., $\phi = 0^\circ$), which occurs at resonance.

(ii) Numerical Calculation: [4 Marks]

Step 1: Given Data and Formulas [1 Mark]

Given: $L = \frac{5}{\pi} \text{ H}$, $C = \frac{50}{\pi} \times 10^{-6} \text{ F}$, $R = 400\ \Omega$, $v = 140 \sin(100\pi t) \text{ V}$.

From the standard equation $v = V_m \sin(\omega t)$, we have $V_m = 140 \text{ V}$ and $\omega = 100\pi \text{ rad/s}$.

Step 2: Mathematical Working [2 Marks]

Calculate Reactances:

$$X_L = \omega L = 100\pi \times \frac{5}{\pi} = 500\ \Omega$$ $$X_C = \frac{1}{\omega C} = \frac{1}{100\pi \times \frac{50}{\pi} \times 10^{-6}} = \frac{10^6}{5000} = 200\ \Omega$$

Calculate Impedance ($Z$):

$$Z = \sqrt{R^2 + (X_L - X_C)^2} = \sqrt{400^2 + (500 - 200)^2} = \sqrt{160000 + 90000} = \sqrt{250000} = 500\ \Omega$$

Calculate RMS Current ($I_{rms}$):

$$V_{rms} = \frac{V_m}{\sqrt{2}} = \frac{140}{1.4} = 100 \text{ V}$$ $$I_{rms} = \frac{V_{rms}}{Z} = \frac{100}{500} = 0.2 \text{ A}$$

Step 3: Final Answer [1 Mark]

Impedance $Z = 500\ \Omega$; RMS Current $I_{rms} = 0.2 \text{ A}$.

💡 EL10 Concept Insight: Think of the LCR circuit like a swing; resonance is when you push at the exact right rhythm to make it go as high as possible, while impedance is just the total "drag" or resistance the circuit puts up against the electricity trying to flow through it.


Solution (b)

(i) Transformer Theory: [2 Marks]

(refer to circuit diagram below)

CBSE Class 12 2026 • Q14 • 1 Mark
An ac voltage is given as $v = 14\sin(314t)\text{ V}$. The average and the effective value of the voltage (in V) over a cycle are respectively : (A) $14\text{ and }7$ (B) $10\text{ and }14$ (C) $0\text{ and }10$ (D) $10\text{ and }0$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q15 • 1 Mark
An ac voltage is given as $v = 14 \sin (314t)\text{ V}$. The average and the effective value of the voltage (in $\text{V}$) over a cycle are respectively : (A) $14\text{ and }7$ (B) $10\text{ and }14$ (C) $0\text{ and }10$ (D) $10\text{ and }0$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q16 • 1 Mark
Which of the following statements is \textit{not} true for electric energy in ac form compared to that in dc form ? (A) Production of ac is economical. (B) ac can be easily and efficiently converted from one voltage to the other. (C) ac can be transmitted economically over long distances. (D) ac is less dangerous.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q17 • 1 Mark
The rms and the average value of an ac voltage $V = V_0 \sin \omega t$ volt over a cycle respectively will be : (A) $\frac{V_0}{2}, \frac{V_0}{\sqrt{2}}$ (B) $\frac{V_0}{\pi}, \frac{V_0}{2}$ (C) $\frac{V_0}{\sqrt{2}}, 0$ (D) $V_0, \frac{V_0}{\sqrt{2}}$
💡 View Verified Solution & Step Rubric

Question: The rms and the average value of an ac voltage $V = V_0 \sin \omega t$ volt over a cycle respectively will be:

Step 1 (Formula / Governing Law & Given Data): [0.5 Mark]

  • The rms (root mean square) value of an AC voltage is defined as the square root of the mean of the squares of the voltage over one complete cycle: $$V_{rms} = \sqrt{\frac{1}{T} \int_{0}^{T} V^2 dt}$$
  • The average value of an AC voltage over one complete cycle ($T$) is defined as: $$V_{avg} = \frac{1}{T} \int_{0}^{T} V dt$$

Step 2 (Step-by-Step Mathematical Working): [0.25 Mark]

  • For rms value: $$V_{rms} = \sqrt{\frac{1}{T} \int_{0}^{T} V_0^2 \sin^2(\omega t) dt} = \frac{V_0}{\sqrt{T}} \sqrt{\int_{0}^{T} \frac{1 - \cos(2\omega t)}{2} dt} = \frac{V_0}{\sqrt{2}}$$
  • For average value: $$V_{avg} = \frac{1}{T} \int_{0}^{T} V_0 \sin(\omega t) dt = \frac{V_0}{T} \left[ -\frac{\cos(\omega t)}{\omega} \right]_{0}^{T}$$ Since $\omega = \frac{2\pi}{T}$, then $\omega T = 2\pi$: $$V_{avg} = \frac{V_0}{2\pi} [-\cos(2\pi) + \cos(0)] = \frac{V_0}{2\pi} [-1 + 1] = 0$$

Step 3 (Final Concluded Answer): [0.25 Mark]

The rms value is $\frac{V_0}{\sqrt{2}}$ and the average value over a complete cycle is $0$.

Correct Option: (C)

💡 EL10 Concept Insight: Think of an AC cycle like a wave that goes up and down equally; because the positive part perfectly cancels out the negative part, the average is zero, but the rms value tells us the "effective" strength by squaring the values so they are all positive before averaging them.

CBSE Class 12 2026 • Q18 • 1 Mark
Which of the following statements is \textbf{not} true for electric energy in ac form compared to that in dc form ? (A) Production of ac is economical. (B) ac can be easily and efficiently converted from one voltage to the other. (C) ac can be transmitted economically over long distances. (D) ac is less dangerous.
💡 View Verified Solution & Step Rubric

Question: Which of the following statements is not true for electric energy in ac form compared to that in dc form?

Step 1 (Conceptual Analysis): [0.5 Mark]
The fundamental properties of Alternating Current (ac) versus Direct Current (dc) are governed by the principles of electromagnetic induction and safety standards. According to NCERT Physics, ac is preferred for power distribution because it can be stepped up or down using transformers (based on Faraday's Law of Induction, $\mathcal{E} = -N \frac{d\Phi_B}{dt}$), which minimizes $I^2R$ power losses during long-distance transmission.

Step 2 (Evaluation of Statements): [0.25 Mark]

  • (A) True: ac generators are simpler and more economical to produce than dc generators.
  • (B) True: Transformers allow efficient voltage conversion for transmission.
  • (C) True: High voltage transmission reduces current, thereby reducing heat loss ($P_{loss} = I^2R$).
  • (D) False: ac is generally considered more dangerous than dc at the same RMS voltage because the peak voltage ($V_0 = \sqrt{2}V_{rms}$) is higher, and the alternating nature can cause muscle contractions that prevent a person from letting go of a live conductor.

Step 3 (Final Concluded Answer): [0.25 Mark]
The statement that is not true is (D) ac is less dangerous.

💡 EL10 Concept Insight: Think of it this way: because ac switches directions so rapidly and has a higher "peak" punch than its average value suggests, it is actually more likely to cause your muscles to lock up and hold onto a wire, making it more dangerous to handle than dc.

CBSE Class 12 2026 • Q19 • 3 Marks
(a) Differentiate between inductive reactance, capacitive reactance and impedance of an ac circuit. (b) An ideal inductor and an ideal capacitor are connected in series across an ac voltage. Plot a graph showing variation of net reactance of the circuit with frequency of the applied ac voltage.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q20 • 3 Marks
(a) Can a transformer step up or step down dc power supply ? (b) Can a step up transformer work as a step down transformer ? (c) Does a step up transformer contradict the principle of conservation of energy ? Justify your answer.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q21 • 1 Mark
In a series LCR circuit connected to an ac source of voltage $V$ and frequency $\omega$, the power loss at resonance is : (A) $I^2 \omega L$ (B) $V^2 / (\omega C)$ (C) $V^2 / R$ (D) $V^2 / $\omega L - \frac{1}{\omega C}$$
💡 View Verified Solution & Step Rubric

Correct Option: (C)

Step 1 (Formula / Governing Law & Given Data): [1/3 Mark]

In a series LCR circuit, the power loss (average power dissipated) is given by the formula:

$$P = V_{rms} I_{rms} \cos \phi$$

Where:

  • $V_{rms}$ is the rms voltage of the ac source.
  • $I_{rms}$ is the rms current in the circuit.
  • $\cos \phi$ is the power factor, where $\phi$ is the phase angle between voltage and current.

Step 2 (Step-by-Step Mathematical Working): [1/3 Mark]

At resonance, the inductive reactance ($X_L = \omega L$) is equal to the capacitive reactance ($X_C = \frac{1}{\omega C}$), which implies:

$$X_L - X_C = 0$$

The impedance of the circuit $Z$ becomes purely resistive:

$$Z = \sqrt{R^2 + (X_L - X_C)^2} = \sqrt{R^2 + 0} = R$$

Consequently, the phase angle $\phi = 0$, making the power factor $\cos \phi = \cos(0) = 1$. The current at resonance is:

$$I = \frac{V}{Z} = \frac{V}{R}$$

Substituting these into the power formula:

$$P = V \cdot I \cdot (1) = V \cdot \left( \frac{V}{R} \right)$$

Step 3 (Final Concluded Answer): [1/3 Mark]

The power loss at resonance is:

$$P = \frac{V^2}{R}$$

Thus, the correct option is (C).

💡 EL10 Concept Insight:

At resonance, the circuit's "push-pull" forces (inductor and capacitor) perfectly cancel each other out, leaving only the resistor to fight the current. Since the resistor is the only component that actually consumes energy as heat, the circuit acts like a simple DC circuit where power is just voltage squared divided by resistance.

CBSE Class 12 2026 • Q22 • 3 Marks
(a) Using a phasor diagram, derive an expression for the impedance of a series LCR circuit connected to an ac source. What is meant by resonance in this circuit ? Obtain expression for the resonant frequency of this circuit.
💡 View Verified Solution & Step Rubric

CBSE Class 12 Physics: Series LCR Circuit Analysis

Step 1 (Phasor Diagram & Impedance Derivation): [1 Mark]

In a series LCR circuit, the voltage across the resistor ($V_R$), inductor ($V_L$), and capacitor ($V_C$) are related to the current ($I$) as follows:

  • $V_R = IR$ (in phase with $I$)
  • $V_L = IX_L$ (leads $I$ by $90^\circ$)
  • $V_C = IX_C$ (lags $I$ by $90^\circ$)

From the phasor diagram, the resultant voltage $V$ is the vector sum of these components. Since $V_L$ and $V_C$ are in opposite directions, the net reactive voltage is $(V_L - V_C)$.

$$V = \sqrt{V_R^2 + (V_L - V_C)^2}$$ $$V = \sqrt{(IR)^2 + (IX_L - IX_C)^2} = I \sqrt{R^2 + (X_L - X_C)^2}$$

Step 2 (Expression for Impedance): [1 Mark]

The impedance ($Z$) is defined as the ratio of the total voltage to the total current ($Z = V/I$). Substituting the values from the previous step:

$$Z = \frac{V}{I} = \sqrt{R^2 + (X_L - X_C)^2}$$

Substituting $X_L = \omega L$ and $X_C = \frac{1}{\omega C}$:

$$Z = \sqrt{R^2 + \left(\omega L - \frac{1}{\omega C}\right)^2}$$

Step 3 (Resonance & Resonant Frequency): [1 Mark]

Definition: Resonance occurs in a series LCR circuit when the inductive reactance equals the capacitive reactance ($X_L = X_C$), making the circuit purely resistive and the current maximum.

Derivation:

$$\omega_0 L = \frac{1}{\omega_0 C} \implies \omega_0^2 = \frac{1}{LC}$$ $$\omega_0 = \frac{1}{\sqrt{LC}}$$

Since $\omega_0 = 2\pi f_0$, the resonant frequency is:

$$f_0 = \frac{1}{2\pi \sqrt{LC}}$$

💡 EL10 Concept Insight: Think of resonance like pushing a child on a swing; when you push at exactly the right rhythm (frequency), the swing goes as high as possible because the energy isn't being wasted fighting against the timing. In an LCR circuit, when the frequency is just right, the "push" from the inductor and the "pull" from the capacitor cancel each other out perfectly, allowing the current to flow with zero opposition from reactance.

CBSE Class 12 2025 • Q23 • 1 Mark
If the phasor diagram for a device connected to AC supply is as shown in the fig, then which of the following statements is true? (A) When the frequency of the AC source is increased than the impedance of the device decreases. (B) This device behaves as conducting wire when connected across DC source. (C) When the frequency of the AC source is decreased than the impedance of the device decreases. (D) This device stores energy in the form of magnetic potential energy.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q24 • 1 Mark
The emf generated by an AC generator is given by $V=V_0\sin\omega t$, where $\omega$ is angular frequency of armature of generator. What will be the emf if the angular frequency is doubled

(A) $V=V_0\sin 2\omega t$
(B) $V=2V_0\sin\omega t$
(C) $V=2V_0\sin 2\omega t$
(D) $V=V_0\sin\omega t$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q25 • 5 Marks
(A) An input potential $V_{\text{in}} = 200\sin 100\pi t\,\text{V}$ is provided to an ideal transformer having $1000$ turns in primary coil and $100$ turns in secondary coil as shown in figure. The load circuit has a resistance of $4\,\Omega$, a capacitive reactance of $2\,\Omega$ and an inductive reactance of $6\,\Omega$. Find: (i) the output voltage across the load circuit (ii) the current flowing through the load circuit (iii) the power supplied to the load circuit by the transformer (B) State the working principle of a transformer and explain how it is a key component in the transfer of electrical power over long distances.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q26 • 1 Mark
Which of the following statements about transformers is not correct ? (A) For ideal transformers, the output power is equal to the input power. (B) A transformer can work for both alternating and direct voltages. (C) For a step-up transformer, the voltage across the secondary coil is higher but the current in it is lower. (D) For an ideal transformer, the magnetic flux linked with the secondary is equal to that linked with the primary.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q27 • 1 Mark
Assertion (A) : The reactance of an inductor decreases with the increase in the frequency of alternating voltage applied. Reason (R) : The reactance of an inductor $X_L = \frac{1}{\omega L}$.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q28 • 1 Mark
An ammeter connected in series in an ac circuit reads $10\text{ A}$. The maximum value of current at any instant in the circuit is : (A) $10\sqrt{2}\text{ A}$ (B) $\frac{10}{\sqrt{2}}\text{ A}$ (C) $\frac{10}{\pi}\text{ A}$ (D) $\frac{10}{\sqrt{2}\,\pi}\text{ A}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q29 • 1 Mark
Assertion (A) : A series LCR circuit behaves as a pure resistive circuit at resonance. Reason (R) : At resonance, $X_L = X_C$ gives $\omega = \frac{1}{\sqrt{LC}}$.
💡 View Verified Solution & Step Rubric

Correct Option: (a) Both Assertion (A) and Reason (R) are true and Reason (R) is the correct explanation of Assertion (A).

Step 1 (Governing Law & Definitions): [0.25 Mark]

In a series LCR circuit, the total impedance $Z$ is given by:

$$Z = \sqrt{R^2 + (X_L - X_C)^2}$$

Where $X_L = \omega L$ (inductive reactance) and $X_C = \frac{1}{\omega C}$ (capacitive reactance).

Step 2 (Step-by-Step Mathematical Working): [0.5 Mark]

  • At resonance, the condition is defined as $X_L = X_C$.
  • Substituting the expressions: $\omega L = \frac{1}{\omega C}$.
  • Rearranging for $\omega$: $\omega^2 = \frac{1}{LC} \implies \omega = \frac{1}{\sqrt{LC}}$.
  • Substituting $X_L = X_C$ into the impedance formula: $$Z = \sqrt{R^2 + (0)^2} = R$$

Step 3 (Final Concluded Answer): [0.25 Mark]

Since the impedance $Z$ becomes equal to the resistance $R$ ($Z = R$), the phase angle $\phi = \tan^{-1}\left(\frac{X_L - X_C}{R}\right) = 0$. Thus, the circuit behaves as a pure resistive circuit. Both statements are correct and logically linked.

💡 EL10 Concept Insight: Imagine the inductor and capacitor as two kids playing tug-of-war; at resonance, they pull with equal strength in opposite directions, effectively canceling each other out so that only the resistor is left to "feel" the current.

CBSE Class 12 2025 • Q30 • 5 Marks
OR\n\n(b) (i) Differentiate between peak and rms values of alternating current. How are they related ?
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q31 • 5 Marks
(ii) A current element X is connected across an ac source of emf $V = V_0 \sin 2\pi \nu t$. It is found that the voltage leads the current in phase by $\frac{\pi}{2}$ radian. If element X was replaced by element Y, the voltage lags behind the current in phase by $\frac{\pi}{2}$ radian. (I) Identify elements X and Y by drawing phasor diagrams. (II) Obtain the condition of resonance when both elements X and Y are connected in series to the source and obtain expression for resonant frequency. What is the impedance value in this case ?
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q32 • 5 Marks
(b) (i) Differentiate between peak and rms values of alternating current. How are they related ? (ii) A current element X is connected across an ac source of emf $V = V_0 \sin 2\pi \nu t$. It is found that the voltage leads the current in phase by $\frac{\pi}{2}$ radian. If element X was replaced by element Y, the voltage lags behind the current in phase by $\frac{\pi}{2}$ radian. (I) Identify elements X and Y by drawing phasor diagrams. (II) Obtain the condition of resonance when both elements X and Y are connected in series to the source and obtain expression for resonant frequency. What is the impedance value in this case ?
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q33 • 1 Mark
A transformer is a device used for converting : (A) high ac voltage and large ac current to low ac voltage and small ac current (B) high ac voltage and small ac current to low ac voltage and small ac current (C) low ac voltage and large ac current to high ac voltage and small ac current (D) low ac voltage and small ac current to high ac voltage and large ac current
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q34 • 1 Mark
An ac source is connected to a resistor and an inductor in series. The voltage across the resistor and inductor are $8\text{ V}$ and $6\text{ V}$ respectively. The voltage of the source is : (A) $10\text{ V}$ (B) $12\text{ V}$ (C) $14\text{ V}$ (D) $16\text{ V}$
💡 View Verified Solution & Step Rubric

Correct Option: (A) 10 V

Step 1 (Formula / Governing Law & Given Data): [0.5 Mark]

In an L-R series circuit connected to an AC source, the voltage across the resistor ($V_R$) and the voltage across the inductor ($V_L$) are not in phase. The total source voltage ($V$) is the phasor sum of these voltages, given by the formula:

$$V = \sqrt{V_R^2 + V_L^2}$$

Given data:

  • Voltage across resistor, $V_R = 8\text{ V}$
  • Voltage across inductor, $V_L = 6\text{ V}$

Step 2 (Step-by-Step Mathematical Working): [0.25 Mark]

Substituting the given values into the phasor sum formula:

$$V = \sqrt{(8)^2 + (6)^2}$$ $$V = \sqrt{64 + 36}$$ $$V = \sqrt{100}$$

Step 3 (Final Concluded Answer): [0.25 Mark]

Calculating the square root, we get:

$$V = 10\text{ V}$$

Thus, the voltage of the source is 10 V, which corresponds to option (A).

💡 EL10 Concept Insight: Because the inductor makes the current "lag" behind the voltage, the voltages don't line up perfectly to just add them together; instead, they act like the sides of a right-angled triangle, so we use the Pythagorean theorem to find the total "hypotenuse" voltage.

CBSE Class 12 2025 • Q35 • 5 Marks
(a) (i) Write the principle of working of an ac generator. Draw its labelled diagram and explain its working. (ii) A resistor of $400\text{ }\Omega$, an inductor of $\left$\frac{5}{\pi}\right$\text{ H}$ and a capacitor of $\left$\frac{50}{\pi}\right$\text{ }\mu\text{F}$ are joined in series across an ac source $\text{v} = 140\text{ sin}$100\pi$\text{t V}$. Find the rms voltages across these three circuit elements. The algebraic sum of these voltages is more than the rms voltage of source. Explain. OR (b) (i) Write the principle of working of a transformer. With the help of a labelled diagram, explain the working of a step-up transformer.
💡 View Verified Solution & Step Rubric

(a) (i) AC Generator: Principle, Diagram, and Working

Principle: An AC generator works on the principle of Electromagnetic Induction. When a closed coil is rotated in a uniform magnetic field, the magnetic flux linked with the coil changes continuously, which induces an alternating emf in the coil.

Diagram Description: A rectangular coil $ABCD$ is placed between the pole pieces of a strong permanent magnet. The ends of the coil are connected to two slip rings $R_1$ and $R_2$, which rotate with the coil. Two carbon brushes $B_1$ and $B_2$ press against the rings to conduct current to the external load.

Working: As the coil rotates, the magnetic flux $\phi = BA \cos(\omega t)$ changes. According to Faraday’s law, the induced emf is $\varepsilon = - \frac{d\phi}{dt} = NBA\omega \sin(\omega t)$. The direction of the induced current is determined by Fleming’s Right-Hand Rule.


(a) (ii) Numerical Solution

Step 1 (Given Data & Governing Laws): [1 Mark]

  • $R = 400\ \Omega$, $L = \frac{5}{\pi}\ \text{H}$, $C = \frac{50}{\pi} \times 10^{-6}\ \text{F}$
  • Source: $v = 140 \sin(100\pi t) \implies V_0 = 140\ \text{V}$, $\omega = 100\pi\ \text{rad/s}$
  • $V_{\text{rms}} = \frac{V_0}{\sqrt{2}} = \frac{140}{\sqrt{2}} = 70\sqrt{2} \approx 99\ \text{V}$

Step 2 (Mathematical Working): [2 Marks]

Calculate Reactances:

$$X_L = \omega L = 100\pi \times \frac{5}{\pi} = 500\ \Omega$$ $$X_C = \frac{1}{\omega C} = \frac{1}{100\pi \times \frac{50}{\pi} \times 10^{-6}} = \frac{10^6}{5000} = 200\ \Omega$$

Calculate Impedance ($Z$):

$$Z = \sqrt{R^2 + (X_L - X_C)^2} = \sqrt{400^2 + (500 - 200)^2} = \sqrt{160000 + 90000} = 500\ \Omega$$

Calculate Current ($I_{\text{rms}}$):

$$I_{\text{rms}} = \frac{V_{\text{rms}}}{Z} = \frac{99}{500} = 0.198\ \text{A}$$

Calculate rms voltages across elements:

$$V_R = I_{\text{rms}}R = 0.198 \times 400 = 79.2\ \text{V}$$ $$V_L = I_{\text{rms}}X_L = 0.198 \times 500 = 99\ \text{V}$$ $$V_C = I_{\text{rms}}X_C = 0.198 \times 200 = 39.6\ \text{V}$$

Step 3 (Final Conclusion & Explanation): [1 Mark]

CBSE Class 12 2025 • Q36 • 5 Marks
(ii) An ideal transformer is designed to convert $50\text{ V}$ into $250\text{ V}$. It draws $200\text{ W}$ power from an ac source whose instantaneous voltage is given by $v_i = 20\sin$100\pi$t\text{ V}$. Find : (I) rms value of input current. (II) expression for instantaneous output voltage. (III) expression for instantaneous output current.
💡 View Verified Solution & Step Rubric

CBSE Class 12 Physics: Marking Scheme Solution

Given Data:

  • Input Voltage ($V_p$) = $50\text{ V}$
  • Output Voltage ($V_s$) = $250\text{ V}$
  • Input Power ($P_{in}$) = $200\text{ W}$
  • Input instantaneous voltage: $v_i = 20\sin(100\pi t)\text{ V}$

(I) RMS value of input current ($I_{p,rms}$): [1.5 Marks]

Step 1 (Formula): For an ideal transformer, input power is given by $P_{in} = V_{p,rms} \times I_{p,rms}$.

Step 2 (Working):

$$I_{p,rms} = \frac{P_{in}}{V_{p,rms}} = \frac{200\text{ W}}{50\text{ V}}$$

Step 3 (Final Answer):

$$I_{p,rms} = 4\text{ A}$$

(II) Expression for instantaneous output voltage ($v_s$): [2 Marks]

Step 1 (Formula): The transformation ratio $k = \frac{V_s}{V_p} = \frac{V_{s,peak}}{V_{p,peak}}$.

Step 2 (Working):

$$k = \frac{250}{50} = 5$$ $$V_{s,peak} = k \times V_{p,peak} = 5 \times 20\text{ V} = 100\text{ V}$$

The frequency remains constant, so $\omega = 100\pi\text{ rad/s}$.

Step 3 (Final Answer):

$$v_s = 100\sin(100\pi t)\text{ V}$$

(III) Expression for instantaneous output current ($i_s$): [1.5 Marks]

Step 1 (Formula): For an ideal transformer, $V_p I_p = V_s I_s \implies I_s = \frac{I_p}{k}$.

Step 2 (Working):

$$I_{p,peak} = \sqrt{2} \times I_{p,rms} = 4\sqrt{2}\text{ A}$$ $$I_{s,peak} = \frac{I_{p,peak}}{k} = \frac{4\sqrt{2}}{5} = 0.8\sqrt{2}\text{ A}$$

Step 3 (Final Answer):

$$i_s = 0.8\sqrt{2}\sin(100\pi t)\text{ A}$$

💡 EL10 Concept Insight:

Think of a transformer like a trade-off: if you "step up" the voltage to make it stronger, the current must "step down" to keep the total energy (power) the same, just like how a seesaw balances weight and distance.

CBSE Class 12 2025 • Q37 • 5 Marks
(b) (i) Write the principle of working of a transformer. With the help of a labelled diagram, explain the working of a step-up transformer. (ii) An ideal transformer is designed to convert $50\text{ V}$ into $250\text{ V}$. It draws $200\text{ W}$ power from an ac source whose instantaneous voltage is given by $\text{v}_i = 20\sin$100\pi$\text{t}\text{ V}$. Find : (I) rms value of input current. (II) expression for instantaneous output voltage. (III) expression for instantaneous output current.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q38 • 5 Marks
(a) (i) Write the principle of working of an ac generator. Draw its labelled diagram and explain its working. (ii) A resistor of $400 \; \Omega$, an inductor of $\left$\frac{5}{\pi}\right$ \text{ H}$ and a capacitor of $\left$\frac{50}{\pi}\right$ \mu\text{F}$ are joined in series across an ac source $v = 140 \sin$100\pi$t \text{ V}$. Find the rms voltages across these three circuit elements. The algebraic sum of these voltages is more than the rms voltage of source. Explain. OR (b) (i) Write the principle of working of a transformer. With the help of a labelled diagram, explain the working of a step-up transformer.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q39 • 1 Mark
An alternating current is given by $I = I_0 \cos $100\pi$ t$. The least time the current takes to decrease from its maximum value to zero will be : (A) $\left(\frac{1}{200}\right)\text{ s}$ (B) $\left(\frac{1}{150}\right)\text{ s}$ (C) $\left(\frac{1}{100}\right)\text{ s}$ (D) $\left(\frac{1}{50}\right)\text{ s}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q40 • 3 Marks
An ac source of voltage $V = V_0 \sin \omega t$ is connected to a circuit element X. It is observed that the current flowing through X varies as $I = I_0 \sin \left$\omega t - \frac{\pi}{2}\right$$. (a) Identify the element X and write the expression for its reactance.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q41 • 3 Marks
(b) Plot a graph to show the variation of reactance of the element with the frequency of the applied voltage. (c) Draw plots showing the variation of voltage and current with time over one cycle of applied ac.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q42 • 1 Mark
Which of the following assumptions has been used to obtain the relation $\frac{v_s}{v_p} = \frac{N_s}{N_p}$ for a transformer ? (A) The resistance of the primary coil is large. (B) The same flux links both the primary and the secondary coils. (C) The resistance of secondary coil is large. (D) The transformer is $100\%$ efficient.
💡 View Verified Solution & Step Rubric

Correct Option: (B) The same flux links both the primary and the secondary coils.

Step 1 (Formula / Governing Law & Given Data): [0.5 Mark]

According to Faraday’s Law of Electromagnetic Induction, the induced emf ($\varepsilon$) in a coil is proportional to the rate of change of magnetic flux ($\phi$) linked with it. For an ideal transformer, we assume that the magnetic flux produced by the primary coil is perfectly linked to the secondary coil without any leakage:

$$ \varepsilon_p = -N_p \frac{d\phi}{dt} $$ $$ \varepsilon_s = -N_s \frac{d\phi}{dt} $$

Step 2 (Step-by-Step Mathematical Working): [0.25 Mark]

To derive the transformer ratio, we take the ratio of the induced emf in the secondary coil to that in the primary coil:

$$ \frac{\varepsilon_s}{\varepsilon_p} = \frac{-N_s \frac{d\phi}{dt}}{-N_p \frac{d\phi}{dt}} $$

Since the flux $\phi$ is assumed to be the same for both coils at any instant $t$, the term $\frac{d\phi}{dt}$ cancels out:

$$ \frac{\varepsilon_s}{\varepsilon_p} = \frac{N_s}{N_p} $$

Assuming negligible resistance and ideal conditions where terminal voltages $v_s \approx \varepsilon_s$ and $v_p \approx \varepsilon_p$, we obtain:

$$ \frac{v_s}{v_p} = \frac{N_s}{N_p} $$

Step 3 (Final Concluded Answer): [0.25 Mark]

The derivation relies fundamentally on the assumption that there is perfect flux linkage (no magnetic flux leakage) between the primary and secondary coils. Therefore, option (B) is the correct assumption.

💡 EL10 Concept Insight: Imagine the transformer as a bridge for magnetic energy; we assume the bridge is perfect so that every single "magnetic line" created by the first coil travels across and passes through the second coil without getting lost in the air.

CBSE Class 12 2025 • Q43 • 3 Marks
(a) A $20\text{ }\mu\text{F}$ capacitor is connected to a $220\text{ V}$, $\frac{125}{\pi}\text{ Hz}$ ac source. (i) Find the capacitive reactance and the peak value of current in the circuit. (ii) If the frequency of the ac source is doubled, by what factor will the capacitive reactance and the current be changed ? OR (b) An electron (mass $9 \times 10^{-31}\text{ kg}$ and charge $1.6 \times 10^{-19}\text{ C}$) is moving in a circle with a speed of $3.2 \times 10^7\text{ m/s}$ in a magnetic field of $4.5 \times 10^{-4}\text{ T}$ perpendicular to it. Calculate : (i) the radius of the circular path, (ii) its frequency of rotation, and (iii) its energy.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q44 • 5 Marks
(a) (i) A series combination of $L$, $C$ and $R$ is connected to an ac source $V = V_m \sin \omega t$. Obtain : (I) the impedance of the circuit using phasor diagram, (II) the expression for the instantaneous current $I$, and (III) the phase relationship of current to the applied voltage. (ii) Define power factor of an ac circuit. State the conditions under which it is : (I) maximum, (II) minimum. OR (b) (i) Prove that the voltage is ahead of the current in phase by $ \frac{\pi}{2}\text{ rad}$ in an ac circuit containing an ideal inductor. (ii) The currents through two inductors of self-inductance $12\text{ mH}$ and $24\text{ mH}$ are increasing with time at the same rate. Draw graphs showing the variation of the : (I) magnitude of emf induced with the rate of change of current in each inductor. (II) energy stored in each inductor with the current flowing through it.
💡 View Verified Solution & Step Rubric

Solution for Part (a)

Step 1 (Governing Laws & Phasor Setup): [1 Mark]

For a series LCR circuit, the applied voltage $V = V_m \sin \omega t$ is the phasor sum of voltages across the resistor ($V_R$), inductor ($V_L$), and capacitor ($V_C$).

  • $V_R = IR$ (in phase with $I$)
  • $V_L = IX_L$ (leads $I$ by $\pi/2$)
  • $V_C = IX_C$ (lags $I$ by $\pi/2$)

Step 2 (Mathematical Derivation of Impedance): [1.5 Marks]

From the phasor diagram, the resultant voltage $V$ is given by:

$$V^2 = V_R^2 + (V_L - V_C)^2$$

Substituting $V = IZ$, $V_R = IR$, $V_L = IX_L$, and $V_C = IX_C$:

$$(IZ)^2 = (IR)^2 + (IX_L - IX_C)^2$$ $$Z = \sqrt{R^2 + (X_L - X_C)^2}$$

Where $X_L = \omega L$ and $X_C = \frac{1}{\omega C}$.

Step 3 (Current Expression & Phase Relationship): [1 Mark]

The instantaneous current is $I = I_m \sin(\omega t - \phi)$, where $I_m = \frac{V_m}{Z}$.

The phase angle $\phi$ is given by:

$$\tan \phi = \frac{X_L - X_C}{R}$$

If $X_L > X_C$, current lags voltage. If $X_C > X_L$, current leads voltage.

Step 4 (Power Factor Definition & Conditions): [1.5 Marks]

Definition: Power factor ($\cos \phi$) is the ratio of resistance to impedance ($R/Z$).

  • Maximum: $\cos \phi = 1$ when $\phi = 0$ (Resonance condition: $X_L = X_C$).
  • Minimum: $\cos \phi = 0$ when $\phi = \pi/2$ (Purely inductive or capacitive circuit).

💡 EL10 Concept Insight

Think of the LCR circuit like a tug-of-war: the inductor pulls the current one way, the capacitor pulls it the other, and the resistor acts like friction slowing everything down; the "impedance" is just the total combined resistance to the flow of electricity.


Solution for Part (b)

Step 1 (Inductor Phase Proof): [2 Marks]

For an ideal inductor, $V = L \frac{di}{dt}$. If $i = I_m \sin \omega t$, then:

$$V = L \frac{d}{dt} (I_m \sin \omega t) = \omega L I_m \cos \omega t$$ $$V = V_m \sin(\omega t + \pi/2)$$

Since the argument is $(\omega t + \pi/2)$, the voltage leads the current by $\pi/2$.

Step 2 (Induced EMF Graph): [1.5 Marks]

CBSE Class 12 2025 • Q45 • 1 Mark
Which of the following assumptions has been used to obtain the relation $\frac{\text{v}_\text{s}}{\text{v}_\text{p}} = \frac{\text{N}_\text{s}}{\text{N}_\text{p}}$ for a transformer ? (A) The resistance of the primary coil is large. (B) The same flux links both the primary and the secondary coils. (C) The resistance of secondary coil is large. (D) The transformer is $100\%$ efficient.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q46 • 3 Marks
(a) A $20\text{ }\mu\text{F}$ capacitor is connected to a $220\text{ V}$, $\frac{125}{\pi}\text{ Hz}$ ac source.\n(i) Find the capacitive reactance and the peak value of current in the circuit.\n(ii) If the frequency of the ac source is doubled, by what factor will the capacitive reactance and the current be changed ?
💡 View Verified Solution & Step Rubric

Solution: Capacitive Reactance and AC Circuit Analysis

Given Data:

  • Capacitance, $C = 20\text{ }\mu\text{F} = 20 \times 10^{-6}\text{ F}$
  • RMS Voltage, $V_{rms} = 220\text{ V}$
  • Frequency, $f = \frac{125}{\pi}\text{ Hz}$

(i) Capacitive Reactance ($X_C$) and Peak Current ($I_0$)

Step 1 (Formula & Governing Law): [0.5 Mark]

The capacitive reactance is given by $X_C = \frac{1}{2\pi f C}$. The peak current is given by $I_0 = \frac{V_0}{X_C}$, where $V_0 = \sqrt{2} V_{rms}$.

Step 2 (Mathematical Working): [1.0 Mark]

Calculating $X_C$:

$$X_C = \frac{1}{2\pi \left( \frac{125}{\pi} \right) (20 \times 10^{-6})} = \frac{1}{250 \times 20 \times 10^{-6}} = \frac{1}{5000 \times 10^{-6}} = \frac{1}{5 \times 10^{-3}} = 200\text{ }\Omega$$

Calculating $I_0$:

$$V_0 = 220\sqrt{2}\text{ V}$$ $$I_0 = \frac{220\sqrt{2}}{200} = 1.1\sqrt{2}\text{ A} \approx 1.556\text{ A}$$

Step 3 (Final Concluded Answer): [0.5 Mark]

Capacitive Reactance, $X_C = 200\text{ }\Omega$; Peak Current, $I_0 \approx 1.56\text{ A}$.


(ii) Effect of Doubling Frequency

Step 1 (Formula & Governing Law): [0.5 Mark]

Since $X_C \propto \frac{1}{f}$ and $I_{rms} \propto \frac{1}{X_C}$, it follows that $I_{rms} \propto f$.

Step 2 (Mathematical Working): [0.25 Mark]

  • If $f' = 2f$, then $X_C' = \frac{1}{2\pi (2f) C} = \frac{1}{2} X_C$.
  • Since $I = \frac{V}{X_C}$, then $I' = \frac{V}{X_C/2} = 2I$.

Step 3 (Final Concluded Answer): [0.25 Mark]

The capacitive reactance is halved (factor of $1/2$), and the current is doubled (factor of $2$).


💡 EL10 Concept Insight:

Think of a capacitor like a gate that gets easier to pass through as the AC signal vibrates faster; because the "gate" opens and closes more rapidly, the resistance (reactance

CBSE Class 12 2025 • Q47 • 5 Marks
(a) (i) A series combination of $L$, $C$ and $R$ is connected to an ac source $V = V_{\text{m}} \sin \omega t$. Obtain : (I) the impedance of the circuit using phasor diagram, (II) the expression for the instantaneous current $I$, and (III) the phase relationship of current to the applied voltage. (ii) Define power factor of an ac circuit. State the conditions under which it is : (I) maximum, (II) minimum. OR (b) (i) Prove that the voltage is ahead of the current in phase by $\frac{\pi}{2}\text{ rad}$ in an ac circuit containing an ideal inductor. (ii) The currents through two inductors of self-inductance $12\text{ mH}$ and $24\text{ mH}$ are increasing with time at the same rate. Draw graphs showing the variation of the : (I) magnitude of emf induced with the rate of change of current in each inductor. (II) energy stored in each inductor with the current flowing through it.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q48 • 1 Mark
The ratio of the number of turns of the primary to the secondary coils in an ideal transformer is 20 : 1. If 240 V ac is applied from a source to the primary coil of transformer and a 6.0 $\Omega$ resistor is connected across the output terminals, then current drawn by the transformer from the source will be -
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q49 • 3 Marks
An ac source of voltage $v = v_m \sin \omega t$ is connected to a series combination of LCR circuit. Draw the phasor diagram. Using it obtain an expression for the impedance of the circuit and the phase difference between applied voltage and the current.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q50 • 1 Mark
The alternating current I in an inductor is observed to vary with time t as shown in the graph for a cycle. Which one of the following graphs is the correct representation of wave form of voltage V with time t?
💡 View Verified Solution & Step Rubric

Question Analysis: Given an alternating current $I$ flowing through an inductor $L$, we must determine the waveform of the induced voltage $V$ across it.

Step 1 (Formula / Governing Law & Given Data): [0.25 Mark]

The voltage $V$ across an ideal inductor is related to the current $I$ flowing through it by Faraday's Law of Induction, expressed as:

$$V = L \frac{dI}{dt}$$

Where $L$ is the self-inductance and $\frac{dI}{dt}$ represents the instantaneous rate of change of current with respect to time.

Step 2 (Step-by-Step Mathematical Working): [0.5 Mark]

  • If the current $I$ is represented by a triangular waveform (linear segments), the derivative $\frac{dI}{dt}$ represents the slope of the $I-t$ graph.
  • For a linear increase in current ($I = mt + c$), the slope is positive and constant, resulting in a constant positive voltage.
  • For a linear decrease in current, the slope is negative and constant, resulting in a constant negative voltage.
  • Mathematically, the derivative of a triangular wave (piecewise linear function) is a square wave.

Step 3 (Final Concluded Answer): [0.25 Mark]

The correct representation of the voltage $V$ with time $t$ is a square wave. The voltage waveform will show abrupt transitions between positive and negative constant values corresponding to the constant positive and negative slopes of the current graph.

💡 EL10 Concept Insight: Think of an inductor like a stubborn person who hates change; when the current changes steadily, the inductor pushes back with a constant force (voltage), but every time the current switches from increasing to decreasing, the inductor instantly flips its push from positive to negative.

CBSE Class 12 2025 • Q51 • 1 Mark
A transformer is connected to a 200 V ac source. The transformer supplies 3000 V to a device. If the number of turns in the primary coil is 450, then the number of turns in its secondary coil is - (A) 30 (B) 450 (C) 4500 (D) 6750
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q52 • 1 Mark
Assertion (A) : In an ideal step-down transformer, the electrical energy is not lost. Reason (R) : In a step-down transformer, voltage decreases but the current increases.
💡 View Verified Solution & Step Rubric

Correct Option: (b) Both Assertion (A) and Reason (R) are true, but Reason (R) is not the correct explanation of Assertion (A).


Step 1 (Foundational Principle): [0.25 Mark]

An ideal transformer is defined as one where there is no dissipation of energy due to resistance of windings, hysteresis, or eddy currents. The governing principle for an ideal transformer is the Law of Conservation of Energy, which states that the input power equals the output power:

$$P_{in} = P_{out} \implies V_p I_p = V_s I_s$$

Step 2 (Analysis of Assertion and Reason): [0.50 Mark]

  • Assertion (A): In an ideal transformer, by definition, there are no energy losses (efficiency $\eta = 100\%$). Thus, the statement is True.
  • Reason (R): For a step-down transformer, the turns ratio $N_s < N_p$, which implies $V_s < V_p$. Since $V_p I_p = V_s I_s$, it follows that $I_s > I_p$. Thus, the statement is True.

Step 3 (Final Conclusion): [0.25 Mark]

While both statements are scientifically accurate, the Reason (R) explains the transformation mechanism of voltage and current, whereas the Assertion (A) refers to the efficiency/energy conservation of the device. Therefore, (R) is not the correct explanation for (A).


💡 EL10 Concept Insight: Think of a transformer like a trade-off: if you want to lower the "pressure" (voltage) of electricity, the "flow" (current) must speed up to keep the total amount of power exactly the same, just like how a wide river flows slower than a narrow one to carry the same amount of water.

CBSE Class 12 2025 • Q53 • 1 Mark
The alternating current I in an inductor is observed to vary with time $t$ as shown in the graph for a cycle. [Graph of I versus t showing a triangular waveform peaking at $T/2$ and ending at $T$] Which one of the following graphs is the correct representation of wave form of voltage $V$ with time $t$? (A) [Graph A] (B) [Graph B] (C) [Graph C] (D) [Graph D]
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q54 • 3 Marks
Differentiate between the peak value and root mean square value of an alternating current. Derive the expression for the root mean square value of alternating current, in terms of its peak value.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q55 • 1 Mark
A soft iron rod X is allowed to fall on the two poles of a U shaped permanent magnet as shown in figure. A coil is wrapped over one arm of the U shaped magnet. During fall of the rod, the current in the coil will be (A) clockwise current (B) anticlockwise current (C) alternating current (D) zero
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q56 • 1 Mark
The number of turns between different pairs of output terminals are shown for a step-up transformer. Input voltage of $20\text{ V}$ is applied between A and B. Between which two terminals will the output be $120\text{ V}$ ? (A) P and Q (B) Q and S (C) P and R (D) P and S
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q57 • 3 Marks
(a) ac voltage of frequency $\omega$ is applied across a series LCR circuit. Draw the phasor diagram and obtain the impedance of the circuit. (b) Discuss 'resonance' in a series LCR circuit and write the expression for resonant frequency.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q58 • 1 Mark
A step up transformer — (A) decreases the current to transmit power over short distances with minimum loss. (B) increases the current to transmit power over short distances with minimum loss. (C) increases the voltage to transmit power over short distances with minimum loss. (D) increases the voltage to transmit power over long distances with minimum loss.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q59 • 1 Mark
Assertion (A) : At resonance the impedance of a series LCR circuit is $Z = R$. Reason (R) : $Z = \sqrt{R^2 + (X_C - X_L)^2}$ and at resonance the inductive reactance ($X_L$) is equal to the capacitive reactance ($X_C$).
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q60 • 3 Marks
(a) Explain how the reactance of a capacitor and that of an inductor change with the frequency of ac source. (b) An ideal inductor of self-inductance $0.5\text{ H}$ is connected to an ac source of peak voltage $314\text{ V}$ and frequency $50\text{ Hz}$. Calculate the peak value of current in the circuit.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q61 • 1 Mark
An alternating voltage of frequency of 50 Hz is applied to a half-wave rectifier. Then the ripple frequency of the output will be : (A) 100 Hz (B) 50 Hz (C) 25 Hz (D) 150 Hz
💡 View Verified Solution & Step Rubric

Correct Option: (B) 50 Hz

Step 1 (Formula / Governing Law & Given Data): [0.25 Mark]

In a half-wave rectifier, the output is obtained only during the positive half-cycle of the input AC signal, while the negative half-cycle is blocked. Therefore, the frequency of the ripple in the output ($f_{out}$) is equal to the frequency of the input AC supply ($f_{in}$).

Given data:

  • Input frequency ($f_{in}$) = $50\text{ Hz}$

Step 2 (Step-by-Step Mathematical Working): [0.5 Mark]

For a half-wave rectifier, the relationship between the input frequency and the output ripple frequency is defined as:

$$f_{out} = f_{in}$$

Substituting the given value into the equation:

$$f_{out} = 50\text{ Hz}$$

Step 3 (Final Concluded Answer): [0.25 Mark]

The ripple frequency of the output is $50\text{ Hz}$. Thus, option (B) is the correct answer.

💡 EL10 Concept Insight:

Think of a half-wave rectifier like a gatekeeper that only lets the "top half" of the wave pass through and deletes the "bottom half." Since the gatekeeper lets one pulse through for every full cycle of the input, the output pulses happen at the exact same speed as the input frequency.

CBSE Class 12 2024 • Q62 • 5 Marks
(iii) An electric lamp is designed to operate at 110 V dc and 11 A current. If the lamp is operated on 220 V, 50 Hz ac source with a coil in series, then find the inductance of the coil.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q63 • 5 Marks
(b) (i) Draw a labelled diagram of a step-up transformer and describe its working principle. Explain any three causes for energy losses in a real transformer. (ii) A step-up transformer converts a low voltage into high voltage. Does it violate the principle of conservation of energy? Explain. (iii) A step-up transformer has 200 and 3000 turns in its primary and secondary coils respectively. The input voltage given to the primary coil is 90 V. Calculate: (1) The output voltage across the secondary coil (2) The current in the primary coil if the current in the secondary coil is 2.0 A.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q64 • 1 Mark
The primary and secondary coils of a transformer have 500 turns and 5000 turns respectively. The primary coil is connected to an ac source of 220 V - 50 Hz. The output across the secondary coil is : (A) 220 V - 50 Hz (B) 1100 V - 50 Hz (C) 2200 V - 5 Hz (D) 2200 V - 50 Hz
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q65 • 3 Marks
(a) Draw the graphs showing the variation of the following with the frequency of ac source in a circuit : (i) Resistance (ii) Capacitive reactance (iii) Inductive reactance (b) Can the voltage drop across the inductor or the capacitor in a series LCR circuit be greater than the applied voltage of the ac source ? Justify your answer.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q66 • 5 Marks
(a) (i) A resistor and a capacitor are connected in series to an ac source $v = v_m \sin \omega t$. Derive an expression for the impedance of the circuit. (ii) When does an inductor act as a conductor in a circuit ? Give reason for it. (iii) An electric lamp is designed to operate at $110\text{ V}$ dc and $11\text{ A}$ current. If the lamp is operated on $220\text{ V}$, $50\text{ Hz}$ ac source with a coil in series, then find the inductance of the coil. OR (b) (i) Draw a labelled diagram of a step-up transformer and describe its working principle. Explain any three causes for energy losses in a real transformer. (ii) A step-up transformer converts a low voltage into high voltage. Does it violate the principle of conservation of energy ? Explain. (iii) A step-up transformer has $200$ and $3000$ turns in its primary and secondary coils respectively. The input voltage given to the primary coil is $90\text{ V}$. Calculate : (1) The output voltage across the secondary coil (2) The current in the primary coil if the current in the secondary coil is $2.0\text{ A}$.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q67 • 5 Marks
(I) Explain briefly, with the help of a labelled diagram, the basic principle of the working of an a.c. generator. In an a.c. generator, coil of $N$ turns and area $A$ is rotated at an angular velocity $\omega$ in a uniform magnetic field $B$. Derive an expression for the instantaneous value of the emf induced in coil. What is the source of energy generation in this device? OR (II) a) With the help of a diagram, explain the principle of a device which changes a low ac voltage into a high voltage . Deduce the expression for the ratio of secondary voltage to the primary voltage in terms of the ratio of the number of turns of primary and secondary winding. For an ideal transformer, obtain the ratio of primary and secondary currents in terms of the ratio of the voltages in the secondary and primary coils. b) Write any two sources of the energy losses which occur in actual transformers. c) A step-up transformer converts a low input voltage into a high output voltage. Does it violate law of conservation of energy? Explain.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q68 • 1 Mark
A resistor and an ideal inductor are connected in series to a $100\sqrt{2}\text{ V}$, $50\text{ Hz}$ ac source. When a voltmeter is connected across the resistor or the inductor, it shows the same reading. The reading of the voltmeter is : (A) $100\sqrt{2}\text{ V}$ (B) $100\text{ V}$ (C) $50\sqrt{2}\text{ V}$ (D) $50\text{ V}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q69 • 1 Mark
In an ac circuit, the instantaneous values of current (in A) and voltage (in V) are $\text{I} = 5 \sin \omega\text{t}$ and $\text{E} = 200 \cos$\omega\text{t} + \frac{\pi}{3}$$ respectively. The phase difference between voltage and current at any instant is : (A) $\frac{5\pi}{6}$ (B) $\frac{5\pi}{4}$ (C) $\frac{5\pi}{2}$ (D) $\frac{3\pi}{2}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q70 • 3 Marks
An ac voltage $v_i = 140 \sin$100 \pi t$ \text{ V}$ is applied to the primary coil having 200 turns, of an ideal transformer and it supplies a power of 5 kW. If the secondary coil has 1000 turns, find: (a) the output voltage, (b) the instantaneous voltage across the secondary coil, and (c) the current in the secondary coil. (Take $\sqrt{2} = 1.4$)
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q71 • 1 Mark
A bulb is rated $(100 \; \text{W}, 110 \; \text{V})$. It is operated by current of $1.0 \; \text{A}$ supplied by a step down transformer. If the input voltage and efficiency of the transformer are $220 \; \text{V}$ and $0.9$ respectively, the input current drawn from the mains is : (A) $\frac{1}{2} \; \text{A}$ (B) $\frac{3}{8} \; \text{A}$ (C) $\frac{5}{9} \; \text{A}$ (D) $\frac{4}{7} \; \text{A}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q72 • 1 Mark
If the frequency of the half-wave rectifier is 50 Hz, the frequency of full-wave rectifier is : (A) 25 Hz (B) 50 Hz (C) 100 Hz (D) 200 Hz
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q73 • 3 Marks
A sinusoidal voltage is applied to an electric circuit containing a circuit element 'X' in which the current leads the voltage by $\frac{\pi}{2}$. (a) Identify the circuit element 'X' in the circuit. (b) Write the formula for its reactance. (c) Show graphically the variation of this reactance with frequency of ac voltage. (d) Explain the behaviour of this element when it is used in (i) an ac circuit, and (ii) a dc circuit.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q74 • 3 Marks
Distinguish between reactance and impedance of an ac circuit. Show that an ideal inductor in an ac circuit does not dissipate any power.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q75 • 1 Mark
Figure shows the variation of inductive reactance $X_L$ of two ideal inductors of inductance $L_1$ and $L_2$, with angular frequency $\omega$. The value of $\frac{L_1}{L_2}$ is (A) $\sqrt{3}$ (B) $\frac{1}{\sqrt{3}}$ (C) $3$ (D) $\frac{1}{3}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q76 • 5 Marks
(a) (i) Mention the factors on which the resonant frequency of a series LCR circuit depends. Plot a graph showing variation of impedance of a series LCR circuit with the frequency of the applied a.c. source. (ii) With the help of a suitable diagram, explain the working of a step-up transformer. (iii) Write two causes of energy loss in a real transformer. OR (b) (i) With the help of a diagram, briefly explain the construction and working of ac generator. (ii) An electron is revolving around a proton in an orbit of radius r with a speed v. Obtain expression for magnetic moment associated with the electron.
💡 View Verified Solution & Step Rubric

Part (a) Solution

(i) Resonant Frequency and Impedance Graph [1.5 Marks]

Step 1 (Formula): [0.5 Mark]
The resonant frequency $f_r$ of a series LCR circuit is given by the condition where inductive reactance equals capacitive reactance ($X_L = X_C$):

$$ \omega_r L = \frac{1}{\omega_r C} \implies \omega_r = \frac{1}{\sqrt{LC}} $$

Thus, $f_r = \frac{1}{2\pi\sqrt{LC}}$. The factors are Inductance ($L$) and Capacitance ($C$).

Step 2 (Graph): [1.0 Mark]
The impedance $Z = \sqrt{R^2 + (\omega L - \frac{1}{\omega C})^2}$. At resonance, $Z = R$ (minimum). The graph is a U-shaped curve plotted between $Z$ and frequency $f$.

[Graph: Z on y-axis, f on x-axis. Curve starts high, dips to R at $f_r$, then rises.]

(ii) Step-up Transformer [2.0 Marks]

Step 1 (Diagram/Working): [1.0 Mark]
A step-up transformer consists of two coils (primary and secondary) wound on a soft iron core. In a step-up transformer, the number of turns in the secondary coil ($N_s$) is greater than the number of turns in the primary coil ($N_p$).

Step 2 (Principle): [1.0 Mark]
Based on Faraday's Law of Induction, the changing magnetic flux in the primary coil induces an EMF in the secondary coil. Since $N_s > N_p$, the output voltage $V_s > V_p$.

(iii) Energy Losses [1.5 Marks]

  • Copper Loss: Heat produced due to the resistance of the windings ($I^2R$ loss).
  • Eddy Current Loss: Induced currents in the iron core causing heating.

Part (b) Solution

(i) AC Generator [2.5 Marks]

Construction: Consists of a rectangular coil rotating in a uniform magnetic field between two pole pieces of a magnet. The ends are connected to slip rings and carbon brushes.

Working: As the coil rotates, the magnetic flux $\phi = BA \cos(\theta) = BA \cos(\omega t)$ linked with it changes. By Faraday's Law, induced EMF $\varepsilon = - \frac{d\phi}{dt} = BA\omega \sin(\omega t)$.

(ii) Magnetic Moment of Electron [2.5 Marks]

Step 1 (Formula): [1.0 Mark]
Magnetic moment $\mu = I \cdot A$. The current $I$ created by an electron moving with speed $v$ in a circle of radius $r$ is $I = \frac{e}{T}$, where $T = \frac{2\pi r}{v}$.

Step 2 (Substitution): [1.0 Mark]
$$ I = \frac{e}{2\pi r / v} = \frac{ev

CBSE Class 12 2024 • Q77 • 5 Marks
(i) You are given three circuit elements X, Y and Z. They are connected one by one across a given ac source. It is found that V and I are in phase for element X. V leads I by $\left$\frac{\pi}{4}\right$$ for element Y while I leads V by $\left$\frac{\pi}{4}\right$$ for element Z. Identify elements X, Y and Z. (ii) Establish the expression for impedance of circuit when elements X, Y and Z are connected in series to an ac source. Show the variation of current in the circuit with the frequency of the applied ac source. (iii) In a series LCR circuit, obtain the conditions under which (i) impedance is minimum and (ii) wattless current flows in the circuit.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q78 • 5 Marks
(i) Describe the construction and working of a transformer and hence obtain the relation for $\left(\frac{V_s}{V_p}\right)$ in terms of number of turns of primary and secondary. (ii) Discuss four main causes of energy loss in a real transformer.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q79 • 1 Mark
An ac voltage is applied across an ideal inductor. The current in it (A) leads the voltage by $\left(\frac{1}{4}\right)$ cycle. (B) lags the voltage by $\left(\frac{1}{4}\right)$ cycle. (C) leads the voltage by $\left(\frac{1}{2}\right)$ cycle. (D) lags the voltage by $\left(\frac{1}{2}\right)$ cycle.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q80 • 5 Marks
(a) (i) You are given three circuit elements X, Y and Z. They are connected one by one across a given ac source. It is found that V and I are in phase for element X. V leads I by $\left$\frac{\pi}{4}\right$$ for element Y while I leads V by $\left$\frac{\pi}{4}\right$$ for element Z. Identify elements X, Y and Z. (ii) Establish the expression for impedance of circuit when elements X, Y and Z are connected in series to an ac source. Show the variation of current in the circuit with the frequency of the applied ac source. (iii) In a series LCR circuit, obtain the conditions under which (i) impedance is minimum and (ii) wattless current flows in the circuit.
💡 View Verified Solution & Step Rubric

CBSE Class 12 Physics: Series LCR Circuit Analysis

(a) (i) Identification of Elements: [1 Mark]

  • Element X: Since $V$ and $I$ are in phase, the element is a Resistor ($R$).
  • Element Y: Since $V$ leads $I$ by $\frac{\pi}{4}$, the element is an Inductor ($L$) (or an $LR$ series circuit).
  • Element Z: Since $I$ leads $V$ by $\frac{\pi}{4}$, the element is a Capacitor ($C$) (or an $CR$ series circuit).

(a) (ii) Impedance of Series LCR Circuit: [2 Marks]

Step 1 (Governing Law): [0.5 Mark]
The impedance $Z$ is derived using the phasor diagram where $V_R = IR$, $V_L = IX_L$, and $V_C = IX_C$. The resultant voltage $V$ is given by $V^2 = V_R^2 + (V_L - V_C)^2$.

Step 2 (Mathematical Working): [1 Mark]
Substituting the values: $$V^2 = (IR)^2 + (IX_L - IX_C)^2$$ $$V^2 = I^2 [R^2 + (X_L - X_C)^2]$$ Since $Z = \frac{V}{I}$, we get: $$Z = \sqrt{R^2 + (X_L - X_C)^2}$$ Substituting $X_L = \omega L$ and $X_C = \frac{1}{\omega C}$: $$Z = \sqrt{R^2 + \left(\omega L - \frac{1}{\omega C}\right)^2}$$

Step 3 (Variation of Current): [0.5 Mark]
The current $I = \frac{V}{Z}$ is maximum when $Z$ is minimum (at resonance, $\omega = \omega_0 = \frac{1}{\sqrt{LC}}$). The graph of $I$ vs $\omega$ shows a sharp peak at $\omega_0$.

(a) (iii) Conditions for Impedance and Wattless Current: [2 Marks]

Condition (i) - Minimum Impedance: [1 Mark]
Impedance is minimum when the reactive part becomes zero: $$X_L - X_C = 0 \implies \omega L = \frac{1}{\omega C}$$ This occurs at the resonant frequency $\omega_0 = \frac{1}{\sqrt{LC}}$. At this point, $Z = R$.

Condition (ii) - Wattless Current: [1 Mark]
Wattless current flows when the average power consumed is zero ($P_{avg} = 0$). Since $P = V_{rms}I_{rms}\cos\phi$, this happens when the power factor $\cos\phi = 0$, which implies $\phi = \frac{\pi}{2}$. This occurs in a purely inductive or purely capacitive circuit where $R = 0$.


💡 EL10 Concept Insight:
Think of resonance like pushing a child on a swing: if you push at exactly the right rhythm (resonant frequency), the swing goes as high as possible because the energy isn't being wasted fighting against the timing, which is why impedance hits its lowest point and current hits its highest.

CBSE Class 12 2024 • Q81 • 5 Marks
OR (b) (i) Describe the construction and working of a transformer and hence obtain the relation for $\left(\frac{v_s}{v_p}\right)$ in terms of number of turns of primary and secondary. (ii) Discuss four main causes of energy loss in a real transformer.
💡 View Verified Solution & Step Rubric

(i) Construction and Working of a Transformer

Step 1 (Construction & Principle): [1 Mark]

A transformer is a device based on the principle of Mutual Induction. It consists of two coils, the primary ($N_p$ turns) and the secondary ($N_s$ turns), wound on a soft iron core. The core is laminated to minimize eddy currents.

Step 2 (Mathematical Derivation): [2 Marks]

Let $\phi$ be the magnetic flux linked with each turn of the primary and secondary coils. According to Faraday’s Law of Induction, the induced emf in the primary and secondary coils are:

$$e_p = -N_p \frac{d\phi}{dt}$$ $$e_s = -N_s \frac{d\phi}{dt}$$

Assuming an ideal transformer with no flux leakage, the flux per turn is the same for both coils. Dividing the two equations:

$$\frac{e_s}{e_p} = \frac{-N_s \frac{d\phi}{dt}}{-N_p \frac{d\phi}{dt}}$$

Step 3 (Final Relation): [1 Mark]

For an ideal transformer, the terminal voltages $V_s$ and $V_p$ are equal to the induced emfs $e_s$ and $e_p$ respectively:

$$\frac{V_s}{V_p} = \frac{N_s}{N_p}$$

This ratio is known as the turns ratio ($k$).


(ii) Four Main Causes of Energy Loss: [1 Mark]

  • Copper Loss: Energy dissipated as heat due to the electrical resistance of the copper windings ($I^2R$ loss).
  • Iron Loss (Eddy Current Loss): The alternating magnetic flux induces eddy currents in the iron core, causing heating. This is minimized by using a laminated core.
  • Flux Leakage: Not all flux produced by the primary coil links with the secondary coil due to poor design or air gaps.
  • Hysteresis Loss: Energy is lost as heat during each cycle of magnetization and demagnetization of the core material.

💡 EL10 Concept Insight: Think of a transformer like a mechanical gear system; just as gears change speed and torque, a transformer uses magnetic "waves" to swap high-voltage/low-current electricity for low-voltage/high-current electricity (or vice versa) without any physical parts touching.

CBSE Class 12 2024 • Q82 • 5 Marks
OR (b) (i) Describe the construction and working of a transformer and hence obtain the relation for $\frac{v_s}{v_p}$ in terms of number of turns of primary and secondary. (ii) Discuss four main causes of energy loss in a real transformer.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q83 • 1 Mark
Assertion (A) : The capacitive reactance increases with the increase of the frequency ($\omega$) of applied ac voltage. Reason (R) : The value of capacitive reactance ($X_C$) is $\omega C$.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2023 • Q84 • 5 Marks
a. Draw graphs showing the variations of inductive reactance and capacitive reactance with frequency of applied ac source. b. Draw the phasor diagram for a series LRC circuit connected to an AC source. c. When an alternating voltage of $220\text{V}$ is applied across a device X, a current of $0.25\text{A}$ flows which lags behind the applied voltage in phase by $\pi/2$ radian. If the same voltage is applied across another device Y, the same current flows but now it is in phase with the applied voltage. (i) Name the devices X and Y. (ii) Calculate the current flowing in the circuit when the same voltage is applied across the series combination of X and Y. OR a. A series LCR circuit is connected to an ac source. Using the phasor diagram, derive the expression for the impedance of the circuit. b. Plot a graph to show the variation of current with frequency of the ac source, explaining the nature of its variation for two different resistances $R_1$ and $R_2$ ($R_1 < R_2$) at resonance.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2023 • Q85 • 3 Marks
(a) (i) Differentiate between the resistance and reactance of a series LCR circuit. (ii) Explain how a capacitor blocks a direct current and an inductor opposes an alternating current. OR (b) Show mathematically that in an ac circuit containing a pure inductor, the current lags behind the voltage in phase by $\frac{\pi}{2}$.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2023 • Q86 • 1 Mark
In a series LC circuit connected to an ac source, with the increase in the frequency of the source, the net reactance : (a) increases linearly (b) decreases linearly (c) first increases to become maximum and then decreases to zero (d) first decreases to become zero and then increases
💡 View Verified Solution & Step Rubric

Correct Option: (d) first decreases to zero and then increases

Step 1 (Formula / Governing Law & Given Data): [0.25 Mark]

The net reactance ($X_{net}$) of a series LC circuit is the difference between the inductive reactance ($X_L$) and the capacitive reactance ($X_C$):

$$X_{net} = |X_L - X_C|$$

Where:

  • $X_L = \omega L = 2\pi f L$
  • $X_C = \frac{1}{\omega C} = \frac{1}{2\pi f C}$

Step 2 (Step-by-Step Mathematical Working): [0.5 Mark]

Substituting the expressions for $X_L$ and $X_C$ into the net reactance formula:

$$X_{net} = |2\pi f L - \frac{1}{2\pi f C}|$$

As frequency ($f$) increases from zero:

  • At low frequencies, $X_C$ is very large and $X_L$ is small, so $X_{net}$ is dominated by $X_C$ and decreases as $f$ increases.
  • At the resonant frequency ($f_0 = \frac{1}{2\pi\sqrt{LC}}$), $X_L = X_C$, therefore $X_{net} = 0$.
  • At frequencies higher than $f_0$, $X_L$ becomes larger than $X_C$, causing $X_{net}$ to increase as $f$ increases.

Step 3 (Final Concluded Answer): [0.25 Mark]

Since the net reactance starts at a high value (due to $X_C$), drops to zero at resonance, and then rises again (due to $X_L$), the correct behavior is described by option (d).

💡 EL10 Concept Insight: Think of it like a tug-of-war: at low frequencies, the capacitor is "stiff" and dominates the circuit, but as you speed up, it gets easier for current to pass until it perfectly balances the inductor at resonance; after that, the inductor takes over and starts "choking" the current again.