CBSE Class 12 • PHYSICS • Chapter 11 • 200 QUESTIONS

Dual Nature of Radiation and Matter Previous Year Questions

Complete archive of 200 authentic CBSE Class 12 Physics past exam questions for Dual Nature of Radiation and Matter (2022–2026). Free chapterwise practice with step marking schemes and verified solutions.

⚡ Open CBT Simulator ✍️ Physics Formulas 🔥 Repeats Radar 📋 Marks Blueprint
Data Coverage Report
200 Canonical Problems • 0.0% Official Answers Verified • 21.5% Step Solutions Available
Zero Speculation Standard • Unverified marked explicitly

Authentic Examination Questions (200 Problems)

CBSE Class 12 2026 • Q1 • 2 Marks
In a photoelectric experiment, the emitter plate is irradiated with radiation of $200\text{ nm}$. The photocurrent becomes zero when the collector plate potential is $-0.80\text{ V}$. Calculate the work function (in $\text{eV}$) of the emitter.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q2 • 4 Marks
A researcher performs an experiment on photo-electric effect using two metals A and B with unknown work functions. She illuminates the surfaces of A and B with monochromatic radiation of various frequencies and records the value of corresponding stopping potentials ($V_s$). The graph shows the variation of stopping potential ($V_s$) with the frequency of incident radiation ($\nu$) for metals A and B.
💡 View Verified Solution & Step Rubric

Step 1 (Formula / Governing Law & Given Data): [1 Mark]

The photoelectric effect is governed by Einstein’s Photoelectric Equation, which relates the maximum kinetic energy ($K_{max}$) of emitted photoelectrons to the frequency of incident radiation ($\nu$) and the work function ($\Phi_0$) of the metal:

$$K_{max} = h\nu - \Phi_0$$

Since the stopping potential ($V_s$) is defined as the potential required to stop the most energetic electrons, we have $K_{max} = eV_s$. Substituting this into the equation:

$$eV_s = h\nu - \Phi_0 \implies V_s = \left( \frac{h}{e} \right)\nu - \frac{\Phi_0}{e}$$

This equation represents a straight line of the form $y = mx + c$, where the slope is $\frac{h}{e}$ and the y-intercept is $-\frac{\Phi_0}{e}$.

Step 2 (Step-by-Step Mathematical Working): [2 Marks]

  • Slope Analysis: The slope of the $V_s$ versus $\nu$ graph is $\frac{h}{e}$. Since $h$ (Planck’s constant) and $e$ (charge of an electron) are universal constants, the slope for both metals A and B must be identical. The graph shows parallel lines, confirming this theoretical consistency.
  • Work Function Deduction: The x-intercept of the graph represents the threshold frequency ($\nu_0$), where $V_s = 0$. At this point: $$0 = h\nu_0 - \Phi_0 \implies \Phi_0 = h\nu_0$$
  • Comparison: By observing the x-intercepts on the graph, if $\nu_{0,B} > \nu_{0,A}$, then it follows that $\Phi_{0,B} > \Phi_{0,A}$. The metal with the larger x-intercept (further to the right) has a higher work function.

Step 3 (Final Concluded Answer): [1 Mark]

Based on the graphical analysis:

  • Slope: The slope of the graph is equal to $\frac{h}{e}$, which is constant for all metals.
  • Work Function: The metal with the higher threshold frequency ($\nu_0$) has a higher work function ($\Phi_0$). Therefore, if the intercept for B is greater than A, then Metal B has a higher work function than Metal A.

💡 EL10 Concept Insight:

Think of the work function as the "entry fee" a light particle must pay to kick an electron out of the metal. The graph shows that Metal B needs a higher frequency (more energy) just to pay that fee, meaning it holds onto its electrons more tightly than Metal A.

CBSE Class 12 2026 • Q3 • 1 Mark
Answer the following questions : (I) From the graph, the work functions of A and B are ($h$ is Planck's constant and $e$ value of charge on an electron) (A) $v_1$ and $v_2$ (B) $V_1$ and $V_2$ (C) $h v_1$ and $h v_2$ (D) $\frac{h v_1}{\text{e}}$ and $\frac{h v_2}{\text{e}}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q4 • 1 Mark
(II) For radiation of frequency $v > v_2$ incident on the surfaces of A and B, the maximum kinetic energy of ejected electron is (A) greater for metal A because it has a smaller work function. (B) greater for metal B because it has a larger work function. (C) greater for metal B because it has higher threshold frequency. (D) the same for both metal A and metal B because it is independent of work functions of metals.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q5 • 2 Marks
Find the ratio $\left$\frac{\lambda_{\text{a}}}{\lambda_{\text{p}}}\right$$ of de Broglie wavelength $\lambda_{\text{a}}$ associated with an alpha particle to de Broglie wavelength $\lambda_{\text{p}}$ associated with a proton if both are moving with the (a) same velocity (b) same kinetic energy.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q6 • 1 Mark
From the graph, the work functions of A and B are ($h$ is Planck's constant and $e$ value of charge on an electron) (A) $v_1$ and $v_2$ (B) $V_1$ and $V_2$ (C) $h v_1$ and $h v_2$ (D) $\frac{h v_1}{e}$ and $\frac{h v_2}{e}$
💡 View Verified Solution & Step Rubric

Question Analysis: In the standard photoelectric effect graph of Stopping Potential ($V_s$) versus Frequency ($\nu$), the x-intercept represents the threshold frequency ($\nu_0$).

Step 1 (Formula / Governing Law & Given Data): [0.5 Mark]

According to Einstein’s Photoelectric Equation:

$$eV_s = h\nu - \Phi_0$$

Where:

  • $V_s$ is the stopping potential.
  • $\nu$ is the incident frequency.
  • $\Phi_0$ is the work function.
  • At the threshold frequency ($\nu_0$), the stopping potential $V_s = 0$.

Step 2 (Step-by-Step Mathematical Working): [0.25 Mark]

Setting $V_s = 0$ in the photoelectric equation:

$$0 = h\nu_0 - \Phi_0$$ $$\Phi_0 = h\nu_0$$

From the provided graph, the x-intercepts for metals A and B are $\nu_1$ and $\nu_2$ respectively. Therefore, the threshold frequencies are:

  • For metal A: $\nu_{0A} = \nu_1 \implies \Phi_A = h\nu_1$
  • For metal B: $\nu_{0B} = \nu_2 \implies \Phi_B = h\nu_2$

Step 3 (Final Concluded Answer): [0.25 Mark]

Comparing the derived values with the given options, the work functions are $h\nu_1$ and $h\nu_2$.

Correct Option: (C)

💡 EL10 Concept Insight: Think of the work function as the "entry fee" a metal demands to let an electron go; since the energy of a light particle is calculated as $E = h\nu$, the minimum energy needed to pay that fee is just the frequency of light at the starting point multiplied by Planck's constant.

CBSE Class 12 2026 • Q7 • 1 Mark
(IV) The threshold frequency for a metal surface is $\nu_0$. If the radiation of frequency $3\nu_0$ illuminates the surface, the maximum kinetic energy (KE) of photoelectrons is $E_1$. If the frequency were increased to $6\nu_0$, the maximum KE of the photoelectrons becomes $E_2$. Then $\left(\frac{E_1}{E_2}\right)$ equals (A) $1/3$ (B) $1/2$ (C) $2/5$ (D) $3/4$ OR Let m be the slope of the graph line for metal B. If e is the value of electron charge, then Planck's constant 'h' is given by (A) $me$ (B) $\frac{1}{me}$ (C) $\frac{m}{e}$ (D) $\frac{e}{m}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q8 • 1 Mark
From the graph, the work functions of A and B are ($h$ is Planck's constant and $e$ value of charge on an electron) (A) $\nu_1$ and $\nu_2$ (B) $V_1$ and $V_2$ (C) $h\nu_1$ and $h\nu_2$ (D) $\frac{h\nu_1}{e}$ and $\frac{h\nu_2}{e}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q9 • 1 Mark
For radiation of frequency $\nu > \nu_2$ incident on the surfaces of A and B, the maximum kinetic energy of ejected electron is (A) greater for metal A because it has a smaller work function. (B) greater for metal B because it has a larger work function. (C) greater for metal B because it has higher threshold frequency. (D) the same for both metal A and metal B because it is independent of work functions of metals.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q10 • 1 Mark
The maximum kinetic energy of the electrons emitted from a photo sensitive surface depends on (A) work function of the surface '$\phi_0$' only. (B) frequency of the incident radiation '$\nu$' only. (C) intensity of the incident radiation 'I' only. (D) Both $\phi_0$ and $\nu$.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q11 • 1 Mark
In Bohr model of hydrogen atom, the electron makes a transition from $n = 5$ to $n = 1$ state. As a result, a photon of wavelength $\lambda$ is emitted in the process. The wavelength of the photon emitted when an electron makes a transition from energy level $n = 5$ to $n = 2$ will be (A) $\frac{8}{7} \lambda$ (B) $\frac{24}{7} \lambda$ (C) $\frac{16}{7} \lambda$ (D) $\frac{32}{7} \lambda$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q12 • 1 Mark
Assertion (A) : On increasing the intensity of incident light of frequency $\nu (> \nu_0)$ on a photosensitive surface, the photocurrent increases. Reason (R) : The stopping potential for a photosensitive surface increases with increase of frequency $\nu (> \nu_0)$ of incident light.
💡 View Verified Solution & Step Rubric
Question Analysis: Assertion (A) and Reason (R) type question.
Step 1 (Governing Principles): [0.5 Mark]
  • Assertion (A): The photocurrent is directly proportional to the number of photoelectrons emitted per second, which depends on the intensity of incident light (number of photons per unit area per unit time).
  • Reason (R): According to Einstein’s photoelectric equation: $$K_{max} = h\nu - \phi_0 = eV_s$$ where $K_{max}$ is maximum kinetic energy, $\nu$ is frequency, $\phi_0$ is work function, and $V_s$ is stopping potential.
Step 2 (Logical Deduction): [0.25 Mark]
  • For Assertion (A): Increasing intensity increases the number of incident photons, thereby increasing the number of emitted photoelectrons. Thus, the photocurrent increases. (Assertion is True)
  • For Reason (R): From the equation $V_s = \frac{h\nu}{e} - \frac{\phi_0}{e}$, it is evident that $V_s$ is a linear function of frequency $\nu$. As $\nu$ increases, $V_s$ increases. (Reason is True)
Step 3 (Final Concluded Answer): [0.25 Mark]

Both Assertion (A) and Reason (R) are true, but Reason (R) is not the correct explanation of Assertion (A). The increase in photocurrent (A) is due to intensity, whereas the increase in stopping potential (R) is due to frequency; these are two independent phenomena of the photoelectric effect.

💡 EL10 Concept Insight:

Think of light like a rain of balls: Intensity is how many balls you throw (more balls = more splashes/current), while Frequency is how hard you throw each ball (harder throw = more energy/stopping potential). They are two different ways to change the outcome!

CBSE Class 12 2026 • Q13 • 1 Mark
A photosensitive surface is illuminated by radiations of wavelength $\lambda_1, \lambda_2$ ($>\lambda_1$) and $\lambda_3$ one by one and photoemission is observed in each case. $\lambda_1, \lambda_2$ lies in UV range and $\lambda_3$ in visible range. If $V_1$, $V_2$ and $V_3$ are stopping potential in these cases respectively, then (A) $V_1 = V_2 = V_3$ (B) $V_2 > V_1 > V_3$ (C) $V_1 > V_2 > V_3$ (D) $V_3 > V_1 > V_2$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q14 • 1 Mark
In Bohr model of hydrogen atom, an electron makes a transition from $n = 4$ state to $n = 1$ state and a photon of frequency $\nu$ is emitted. The frequency of photon emitted when an electron makes a transition from $n = 4$ state to $n = 2$ state in the same model is (A) $\frac{\nu}{3}$ (B) $\frac{\nu}{4}$ (C) $\frac{\nu}{5}$ (D) $\frac{\nu}{6}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q15 • 3 Marks
Calculate the de Broglie wavelength associated with an electron revolving in the second excited state of hydrogen atom. The ground state energy of the hydrogen atom is $-13.6\text{ eV}$. Take $m_e = 9 \times 10^{-31}\text{ kg}$, $h = 6.6 \times 10^{-34}\text{ J.s}$.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q16 • 1 Mark
The equivalent mass of a photon of wavelength $100\text{ nm}$ is (A) $2.21 \times 10^{-35}\text{ kg}$ (B) $6.63 \times 10^{-33}\text{ kg}$ (C) $1.11 \times 10^{-35}\text{ kg}$ (D) $3.31 \times 10^{-33}\text{ kg}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q17 • 1 Mark
The momentum of a photon of wavelength $663\text{ nm}$ is : (A) $10^{-24}\text{ kg ms}^{-1}$ (B) $10^{-25}\text{ kg ms}^{-1}$ (C) $10^{-27}\text{ kg ms}^{-1}$ (D) $10^{-29}\text{ kg ms}^{-1}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q18 • 1 Mark
A beam of blue light is incident on a metal surface with a work function of $\phi_0 = \frac{hc}{550 \text{ nm}}$ and photoelectrons are ejected from the surface. If the blue light is replaced by red light of same intensity, then (A) emitted electrons will be more energetic. (B) emitted electrons will be less energetic. (C) no electrons are emitted. (D) less number of electrons are emitted.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q19 • 1 Mark
Assertion (A) : Photoelectric effect demonstrates particle nature of light. Reason (R) : The number of photoelectrons emitted from a surface depends upon the intensity of radiation.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q20 • 2 Marks
What is meant by threshold frequency ($\nu_0$) for photoelectric emission ? Does it depends on the intensity of light ? How does photoelectric current vary with the intensities of radiation of frequency $\nu (> \nu_0)$ ?
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q21 • 1 Mark
Radiation of wavelength $200\text{ nm}$ is incident on a photosensitive surface of work function $4.2\text{ eV}$. The kinetic energy of fastest photoelectrons emitted from this surface will be close to : (A) $3.5\text{ eV}$ (B) $3.0\text{ eV}$ (C) $2.5\text{ eV}$ (D) $2.0\text{ eV}$
💡 View Verified Solution & Step Rubric

Question: Radiation of wavelength $200\text{ nm}$ is incident on a photosensitive surface of work function $4.2\text{ eV}$. The kinetic energy of fastest photoelectrons emitted from this surface will be close to:

Step 1 (Formula / Governing Law & Given Data): [0.5 Mark]

According to Einstein’s Photoelectric Equation, the maximum kinetic energy ($K_{max}$) of the emitted photoelectrons is given by:

$$K_{max} = E - \Phi_0$$

Where:

  • $E = \frac{hc}{\lambda}$ (Energy of incident photon)
  • $\Phi_0 = 4.2\text{ eV}$ (Work function)
  • $h = 6.63 \times 10^{-34}\text{ J}\cdot\text{s}$
  • $c = 3 \times 10^8\text{ m/s}$
  • $\lambda = 200\text{ nm} = 200 \times 10^{-9}\text{ m}$

Step 2 (Step-by-Step Mathematical Working): [0.25 Mark]

First, calculate the energy of the incident photon in electron-volts (eV) using the shortcut $E(\text{eV}) \approx \frac{1240}{\lambda(\text{nm})}$:

$$E = \frac{1240}{200} = 6.2\text{ eV}$$

Now, substitute the values into the photoelectric equation:

$$K_{max} = 6.2\text{ eV} - 4.2\text{ eV}$$ $$K_{max} = 2.0\text{ eV}$$

Step 3 (Final Concluded Answer): [0.25 Mark]

The kinetic energy of the fastest photoelectrons is $2.0\text{ eV}$.

Correct Option: (D)

💡 EL10 Concept Insight: Think of the photon as a packet of energy (like a $6.20$ dollar bill) hitting a surface that demands a "fee" of $4.20$ dollars just to let an electron out; the remaining $2.0$ dollars is what the electron gets to keep as its speed (kinetic energy).

CBSE Class 12 2026 • Q22 • 1 Mark
A proton and an alpha particle have equal momentum. The ratio of their kinetic energies $(E_p/E_a)$ and de Broglie wavelengths associated with them $(\lambda_p/\lambda_a)$ respectively are : (A) $2, 1$ (B) $1, 2$ (C) $4, 1$ (D) $1, 4$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q23 • 1 Mark
Assertion (A) : Photoelectric current depends upon the intensity of the incident radiation. Reason (R) : Stopping potential is independent of the intensity of the incident radiation.
💡 View Verified Solution & Step Rubric

Correct Option: (b) Both Assertion (A) and Reason (R) are true, but Reason (R) is not the correct explanation of Assertion (A).

Step 1 (Foundational Principles): [1/3 Mark]

  • Assertion (A): According to the photoelectric effect, the photoelectric current ($I$) is directly proportional to the number of photoelectrons emitted per second, which is directly proportional to the intensity ($I_{rad}$) of the incident radiation, provided the frequency ($\nu$) is above the threshold frequency ($\nu_0$).
  • Reason (R): According to Einstein’s photoelectric equation: $$K_{max} = h\nu - \Phi_0 = eV_s$$ where $K_{max}$ is the maximum kinetic energy, $h$ is Planck's constant, $\nu$ is the frequency of incident light, $\Phi_0$ is the work function, and $V_s$ is the stopping potential.

Step 2 (Step-by-Step Logical Analysis): [1/3 Mark]

  • Analysis of (A): Since each incident photon ejects one photoelectron, increasing the intensity (number of photons per unit area per unit time) increases the number of emitted electrons, thereby increasing the photoelectric current. Thus, (A) is true.
  • Analysis of (R): From the equation $V_s = \frac{h\nu - \Phi_0}{e}$, it is evident that $V_s$ depends only on the frequency of incident radiation ($\nu$) and the material properties ($\Phi_0$). It does not contain any term related to intensity. Thus, (R) is true.

Step 3 (Final Concluded Answer): [1/3 Mark]

Both statements are scientifically correct based on the experimental observations of the photoelectric effect. However, the fact that stopping potential is independent of intensity (R) does not explain why the current depends on intensity (A). Therefore, (R) is not the correct explanation for (A).

💡 EL10 Concept Insight: Think of light like a rain shower: increasing the intensity is like making the rain heavier (more drops hitting the ground, so more current), while the stopping potential is like the speed of the raindrops—it only changes if you change the "color" (frequency) of the light, not how many drops are falling.

CBSE Class 12 2026 • Q24 • 2 Marks
A particle of mass M at rest splits up into two particles of masses $m_1$ and $m_2$ having non-zero velocities. Calculate the ratio of the de Broglie wavelengths associated with the two particles.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q25 • 1 Mark
The velocity of the photoelectrons emitted from a surface depends upon the : (A) Wavelength of incident radiation only (B) Intensity of incident radiation only (C) Work function of the surface only (D) Both wavelength of the incident radiation and work function of the surface
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q26 • 2 Marks
Calculate the de Broglie wavelength of a neutron having kinetic energy of 150 eV.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q27 • 1 Mark
The ratio of the de Broglie wavelengths associated with the electron revolving in the first and third orbits in hydrogen atom is : (A) 2 (B) $ \frac{1}{2}$ (C) 3 (D) $ \frac{1}{3}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q28 • 1 Mark
Radiation of wavelength $200\text{ nm}$ is incident on a photosensitive surface of work function $4.2\text{ eV}$. The kinetic energy of fastest photoelectrons emitted from this surface will be close to : (A) $3.5\text{ eV}$ (B) $3.0\text{ eV}$ (C) $2.5\text{ eV}$ (D) $2.0\text{ eV}$
💡 View Verified Solution & Step Rubric

Question: Radiation of wavelength $200\text{ nm}$ is incident on a photosensitive surface of work function $4.2\text{ eV}$. The kinetic energy of fastest photoelectrons emitted from this surface will be close to:

Step 1 (Formula / Governing Law & Given Data): [0.5 Mark]

According to Einstein’s Photoelectric Equation, the maximum kinetic energy ($K_{max}$) of the emitted photoelectrons is given by:

$$K_{max} = E - \Phi_0$$

Where:

  • $E = \frac{hc}{\lambda}$ (Energy of incident photon)
  • $\Phi_0 = 4.2\text{ eV}$ (Work function)
  • $h = 6.63 \times 10^{-34}\text{ J}\cdot\text{s}$
  • $c = 3 \times 10^8\text{ m/s}$
  • $\lambda = 200\text{ nm} = 200 \times 10^{-9}\text{ m}$

Step 2 (Step-by-Step Mathematical Working): [0.25 Mark]

First, calculate the energy of the incident photon in electron-volts (eV) using the shortcut $E(\text{eV}) \approx \frac{1240}{\lambda(\text{nm})}$:

$$E = \frac{1240}{200} = 6.2\text{ eV}$$

Now, substitute the values into the photoelectric equation:

$$K_{max} = 6.2\text{ eV} - 4.2\text{ eV}$$ $$K_{max} = 2.0\text{ eV}$$

Step 3 (Final Concluded Answer): [0.25 Mark]

The kinetic energy of the fastest photoelectrons is $2.0\text{ eV}$.

Correct Option: (D)

💡 EL10 Concept Insight: Think of the photon as a packet of energy (like a $6.20$ dollar bill) hitting a surface that demands a "fee" of $4.20$ dollars just to let an electron out; the remaining $2.0$ dollars is what the electron gets to keep as its speed (kinetic energy).

CBSE Class 12 2026 • Q29 • 2 Marks
Light of frequency $5.0 \times 10^{14} \text{ Hz}$ is incident on a metal surface. If the maximum speed of photoelectrons emitted is $6.63 \times 10^{5} \text{ ms}^{-1}$, calculate the threshold frequency for the surface.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q30 • 1 Mark
While studying photoelectric emission from a given surface, the wavelength of the incident radiation is changed from $600 \text{ nm}$ to $400 \text{ nm}$, keeping the intensity of radiation the same. Then : (A) cut-off potential will decrease. (B) cut-off potential will increase. (C) saturation current will decrease. (D) saturation current will increase.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q31 • 1 Mark
Radiation of wavelength $331 \text{ nm}$ irradiates the following metals :
Metal Work Function (eV)
Na $1.92$
K $2.15$
Ca $3.20$
Mo $4.17$
Which of the following statements is correct ? (A) Only Na and K show photoelectric emission. (B) Only Mo will not show photoelectric emission. (C) All of the given metals show photoelectric emission. (D) None of them show photoelectric emission.
💡 View Verified Solution & Step Rubric

Step 1 (Formula / Governing Law & Given Data): [½ Mark]

Given

CBSE Class 12 2026 • Q32 • 1 Mark
The kinetic energy of a charged particle is increased to four times of its initial value. The de Broglie wavelength associated with the particle will : (A) increase by $100\%$ of its initial value. (B) increase by $50\%$ of its initial value. (C) decrease by $25\%$ of its initial value. (D) decrease by $50\%$ of its initial value.
💡 View Verified Solution & Step Rubric

Step 1 (Formula / Governing Law & Given Data): [½ Mark]

The de Broglie wavelength $\

CBSE Class 12 2026 • Q33 • 3 Marks
(a) Explain how the dual aspect of matter is evident in the de Broglie relation. (b) Radiation of wavelength $\lambda$ is incident on a photosensitive surface. Find the de Broglie wavelength of electrons emitted from the surface. Assume that the work function of the surface is negligible.
💡 View Verified Solution & Step Rubric

(a) Dual Aspect of Matter in de Broglie Relation

The de Broglie relation is given by:

$$ \lambda = \frac{h}{p} = \frac{h}{mv} $$

Explanation: The dual aspect is evident because the equation relates the wave property (wavelength, $\lambda$) on the left-hand side to the particle property (momentum, $p = mv$) on the right-hand side, linked by Planck’s constant ($h$). This implies that every moving material particle possesses an associated wave, and every wave exhibits particle-like momentum.


(b) Calculation of de Broglie Wavelength of Emitted Electrons

Step 1 (Governing Laws): [1 Mark]

  • Energy of incident photon: $E = \frac{hc}{\lambda}$
  • Einstein’s Photoelectric Equation: $K_{max} = E - \Phi_0$
  • Given: Work function $\Phi_0 \approx 0$. Therefore, $K_{max} = E = \frac{hc}{\lambda}$.
  • Relation between Kinetic Energy and Momentum: $K = \frac{p^2}{2m} \implies p = \sqrt{2mK}$

Step 2 (Mathematical Working): [1 Mark]

Substitute the expression for $K$ into the momentum formula:

$$ p = \sqrt{2m \left( \frac{hc}{\lambda} \right)} $$

Now, substitute $p$ into the de Broglie wavelength formula $\lambda_e = \frac{h}{p}$:

$$ \lambda_e = \frac{h}{\sqrt{\frac{2mhc}{\lambda}}} $$ $$ \lambda_e = \sqrt{\frac{h^2 \cdot \lambda}{2mhc}} $$

Step 3 (Final Concluded Answer): [1 Mark]

Simplifying the expression, we get the final de Broglie wavelength of the emitted electron:

$$ \lambda_e = \sqrt{\frac{h \lambda}{2mc}} $$

Where $h$ is Planck's constant, $m$ is the mass of the electron, and $c$ is the speed of light.

💡 EL10 Concept Insight: Think of it like a trade-off: the energy from the light "kick" gives the electron its speed, and because the electron is now moving, it starts acting like a tiny wave. The faster the light kicks it, the smaller (shorter) the electron's wave becomes!

CBSE Class 12 2026 • Q34 • 1 Mark
Radiation of wavelength $331 \text{ nm}$ irradiates the following metals :
Metal Work Function (eV)
Na $1.92$
K $2.15$
Ca $3.20$
Mo $4.17$
Which of the following statements is correct ? (A) Only Na and K show photoelectric emission. (B) Only Mo will not show photoelectric emission. (C) All of the given metals show photoelectric emission. (D) None of them show photoelectric emission.
💡 View Verified Solution & Step Rubric

Step 1 (Formula / Governing Law & Given Data): [½ Mark]

Given

CBSE Class 12 2026 • Q35 • 1 Mark
In an experiment on photoelectric emission, the intensity of incident radiation is halved keeping its frequency constant. As a result : (A) cut-off potential will increase. (B) maximum kinetic energy of photoelectrons will remain the same. (C) photocurrent will increase. (D) cut-off potential will decrease.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q36 • 1 Mark
Radiation of wavelength $331\text{ nm}$ irradiates the following metals :
Metal Work Function ($\text{eV}$)
Na $1.92$
K $2.15$
Ca $3.20$
Mo $4.17$
Which of the following statements is correct ? (A) Only $\text{Na}$ and $\text{K}$ show photoelectric emission. (B) Only $\text{Mo}$ will not show photoelectric emission. (C) All of the given metals show photoelectric emission. (D) None of them show photoelectric emission.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q37 • 1 Mark
Photons of frequency $\nu$ are incident on the surfaces of two metals A and B of threshold frequencies $\frac{\nu}{2}$ and $\frac{\nu}{3}$. The ratio of maximum kinetic energy of electrons emitted from metal A to that from metal B is : (A) $\frac{1}{3}$ (B) $\frac{3}{4}$ (C) $\frac{2}{3}$ (D) $\frac{3}{2}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q38 • 3 Marks
Explain how the dual aspect of matter is evident in the de Broglie relation.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q39 • 3 Marks
Radiation of wavelength $\lambda$ is incident on a photosensitive surface. Find the de Broglie wavelength of electrons emitted from the surface. Assume that the work function of the surface is negligible.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q40 • 1 Mark
Light of which of the following colours will have the maximum energy in a photon associated with it ? (A) Red light (B) Yellow light (C) Green light (D) Blue light
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q41 • 1 Mark
Assertion (A) : Photoelectric effect is a spontaneous phenomenon. Reason (R) : According to the wave picture of radiation, an electron would take hours/days to absorb sufficient energy to overcome the work function and come out from a metal surface.
💡 View Verified Solution & Step Rubric

Question Analysis: Assertion (A) and Reason (R) type question.

Step 1 (Conceptual Analysis of Assertion): [0.25 Mark]

The photoelectric effect is an instantaneous process. Once the incident light frequency $\nu$ exceeds the threshold frequency $\nu_0$, the emission of photoelectrons occurs without any time lag (typically $\approx 10^{-9} \text{ s}$). Therefore, the statement that it is a "spontaneous" (in the sense of time-independent/instantaneous) phenomenon is correct in the context of experimental observation.

Step 2 (Conceptual Analysis of Reason): [0.5 Mark]

According to the classical wave theory, energy is distributed continuously over the wavefront. The energy absorbed by an electron per unit time is given by:

$$P = I \cdot A$$

Where $I$ is intensity and $A$ is the effective cross-sectional area of the atom. Calculations based on classical wave theory show that for low-intensity light, an electron would require a significant duration (hours or days) to accumulate energy equal to the work function $\Phi_0$:

$$\Phi_0 = h\nu_0$$

Since the wave theory fails to explain the instantaneous nature observed experimentally, the Reason (R) correctly describes the prediction of the wave picture.

Step 3 (Final Concluded Answer): [0.25 Mark]

Correct Option: (b) Both Assertion (A) and Reason (R) are true, but Reason (R) is not the correct explanation of Assertion (A).

  • Assertion (A) is true because the photoelectric effect is instantaneous.
  • Reason (R) is true because it correctly identifies the failure of the wave theory to explain the time-lag (or lack thereof).
  • However, (R) does not explain why the effect is spontaneous; rather, it explains why the wave theory is inconsistent with the observed spontaneity.

💡 EL10 Concept Insight: Imagine trying to fill a bucket with water using a tiny dropper from far away; the wave theory says it would take forever to fill, but in reality, the photoelectric effect is like a "magic" switch that turns on instantly the moment the light hits, proving that light acts like a stream of individual energy bullets (photons) rather than a continuous wave.

CBSE Class 12 2026 • Q42 • 3 Marks
Photoemission of electrons occurs from a metal ($\phi_0 = 1.96\text{ eV}$) when light of frequency $6.4 \times 10^{14}\text{ Hz}$ is incident on it. Calculate : (a) Energy of a photon in the incident light, (b) The maximum kinetic energy of the emitted electrons, and (c) The stopping potential.
💡 View Verified Solution & Step Rubric

CBSE Class 12 Physics: Solution Marking Scheme

Given Data:

  • Work function, $\phi_0 = 1.96 \text{ eV} = 1.96 \times 1.6 \times 10^{-19} \text{ J} = 3.136 \times 10^{-19} \text{ J}$
  • Frequency of incident light, $\nu = 6.4 \times 10^{14} \text{ Hz}$
  • Planck's constant, $h = 6.63 \times 10^{-34} \text{ J}\cdot\text{s}$
  • Charge of electron, $e = 1.6 \times 10^{-19} \text{ C}$

(a) Energy of a photon in the incident light

Step 1 (Formula): [0.5 Mark]

The energy of a photon is given by the relation:

$$E = h\nu$$

Step 2 (Working): [0.25 Mark]

$$E = (6.63 \times 10^{-34} \text{ J}\cdot\text{s}) \times (6.4 \times 10^{14} \text{ Hz})$$ $$E = 42.432 \times 10^{-20} \text{ J} = 4.24 \times 10^{-19} \text{ J}$$

Converting to eV: $E = \frac{4.24 \times 10^{-19}}{1.6 \times 10^{-19}} \text{ eV} \approx 2.65 \text{ eV}$

Step 3 (Final Answer): [0.25 Mark]

Result: $E = 2.65 \text{ eV}$ (or $4.24 \times 10^{-19} \text{ J}$)


(b) The maximum kinetic energy of the emitted electrons

Step 1 (Formula): [0.5 Mark]

Using Einstein’s Photoelectric Equation:

$$K_{max} = E - \phi_0$$

Step 2 (Working): [0.25 Mark]

$$K_{max} = 2.65 \text{ eV} - 1.96 \text{ eV}$$ $$K_{max} = 0.69 \text{ eV}$$

In Joules: $K_{max} = 0.69 \times 1.6 \times 10^{-19} \text{ J} = 1.104 \times 10^{-19} \text{ J}$

Step 3 (Final Answer): [0.25 Mark]

Result: $K_{max} = 0.69 \text{ eV}$


(c) The stopping potential

Step 1 (Formula): [0.5 Mark]

The stopping potential $V_0$ is related to maximum kinetic energy by:

$$K_{max} = eV_0 \implies V_0 = \frac{K_{max}}{e}$$

Step 2 (Working): [

CBSE Class 12 2026 • Q43 • 1 Mark
The momentum of a photon associated with a microwave of wavelength $4.00\text{ cm}$ is : (A) $1.66 \times 10^{-32}\text{ kg ms}^{-1}$ (B) $1.83 \times 10^{-34}\text{ kg ms}^{-1}$ (C) $2.05 \times 10^{-34}\text{ kg ms}^{-1}$ (D) $1.66 \times 10^{-34}\text{ kg ms}^{-1}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q44 • 3 Marks
What are de Broglie waves? Show that the wavelength of the electromagnetic radiation is equal to the de Broglie wavelength of its quantum (photon).
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q45 • 1 Mark
A $500\text{ nm}$ photon is incident normally on a perfectly reflecting surface and is reflected. The value of momentum transferred to the surface is : (A) $3.87 \times 10^{-43} \text{ kg ms}^{-1}$ (B) $2.5 \times 10^{-30} \text{ kg ms}^{-1}$ (C) $2.65 \times 10^{-27} \text{ kg ms}^{-1}$ (D) $1.33 \times 10^{-27} \text{ kg ms}^{-1}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q46 • 3 Marks
Photoemission of electrons occurs from a metal ($\phi_0 = 1.96\text{ eV}$) when light of frequency $6.4 \times 10^{14}\text{ Hz}$ is incident on it. Calculate : (a) Energy of a photon in the incident light, (b) The maximum kinetic energy of the emitted electrons, and (c) The stopping potential.
💡 View Verified Solution & Step Rubric

CBSE Class 12 Physics: Solution Marking Scheme

Given Data:

  • Work function, $\phi_0 = 1.96 \text{ eV} = 1.96 \times 1.6 \times 10^{-19} \text{ J} = 3.136 \times 10^{-19} \text{ J}$
  • Frequency of incident light, $\nu = 6.4 \times 10^{14} \text{ Hz}$
  • Planck's constant, $h = 6.63 \times 10^{-34} \text{ J}\cdot\text{s}$
  • Charge of electron, $e = 1.6 \times 10^{-19} \text{ C}$

(a) Energy of a photon in the incident light

Step 1 (Formula): [0.5 Mark]

The energy of a photon is given by the relation:

$$E = h\nu$$

Step 2 (Working): [0.25 Mark]

$$E = (6.63 \times 10^{-34} \text{ J}\cdot\text{s}) \times (6.4 \times 10^{14} \text{ Hz})$$ $$E = 42.432 \times 10^{-20} \text{ J} = 4.24 \times 10^{-19} \text{ J}$$

Converting to eV: $E = \frac{4.24 \times 10^{-19}}{1.6 \times 10^{-19}} \text{ eV} \approx 2.65 \text{ eV}$

Step 3 (Final Answer): [0.25 Mark]

Result: $E = 2.65 \text{ eV}$ (or $4.24 \times 10^{-19} \text{ J}$)


(b) The maximum kinetic energy of the emitted electrons

Step 1 (Formula): [0.5 Mark]

Using Einstein’s Photoelectric Equation:

$$K_{max} = E - \phi_0$$

Step 2 (Working): [0.25 Mark]

$$K_{max} = 2.65 \text{ eV} - 1.96 \text{ eV}$$ $$K_{max} = 0.69 \text{ eV}$$

In Joules: $K_{max} = 0.69 \times 1.6 \times 10^{-19} \text{ J} = 1.104 \times 10^{-19} \text{ J}$

Step 3 (Final Answer): [0.25 Mark]

Result: $K_{max} = 0.69 \text{ eV}$


(c) The stopping potential

Step 1 (Formula): [0.5 Mark]

The stopping potential $V_0$ is related to maximum kinetic energy by:

$$K_{max} = eV_0 \implies V_0 = \frac{K_{max}}{e}$$

Step 2 (Working): [

CBSE Class 12 2026 • Q47 • 1 Mark
Assertion (A) : Electron emission from surface of zinc occurs when yellow light is incident on it. Reason (R) : Energy of a photon of yellow light is more than the work function of zinc.
💡 View Verified Solution & Step Rubric

Answer: (d) Assertion (A) is false and Reason (R) is false.

Step 1 (Formula / Governing Law & Given Data): [0.25 Mark]

For photoelectric emission to occur, the energy of the incident photon ($E$) must be greater than or equal to the work function ($\Phi_0$) of the metal surface:

$$E \ge \Phi_0$$

Where $E = \frac{hc}{\lambda}$. The work function of Zinc ($\Phi_0$) is approximately $3.63 \text{ eV}$ to $4.3 \text{ eV}$.

Step 2 (Step-by-Step Mathematical Working): [0.5 Mark]

  • The wavelength of yellow light ($\lambda_{yellow}$) ranges approximately from $570 \text{ nm}$ to $590 \text{ nm}$.
  • Calculating the energy of a yellow light photon: $$E = \frac{1240 \text{ eV}\cdot\text{nm}}{\lambda (\text{nm})} \approx \frac{1240}{580} \approx 2.14 \text{ eV}$$
  • Comparing values: $2.14 \text{ eV} < 3.63 \text{ eV}$ (Work function of Zinc).

Step 3 (Final Concluded Answer): [0.25 Mark]

Since the energy of the yellow light photon ($2.14 \text{ eV}$) is significantly less than the work function of Zinc ($\approx 3.63 \text{ eV}$), the condition for photoelectric emission is not satisfied. Therefore, both the Assertion and the Reason are scientifically incorrect.

💡 EL10 Concept Insight: Think of the work function as the "entry fee" to leave the metal; yellow light simply doesn't have enough energy to pay that fee, so the electrons stay trapped inside the zinc.

CBSE Class 12 2026 • Q48 • 1 Mark
When radiation of suitable frequency is incident on a metal surface, electrons are emitted from the surface. This phenomenon is called photoelectric effect. Einstein explained this phenomenon considering the particle nature of radiation and using the law of conservation of energy. Wave theory of light could not explain this phenomenon. (i) (a) A photon of $3.8\text{ eV}$ energy is incident on a surface of work function $1.8\text{ eV}$. The maximum kinetic energy of the electron emitted from the surface will be : (A) $3.2 \times 10^{-19}\text{ J}$ (B) $1.6 \times 10^{-19}\text{ J}$ (C) $1.25 \times 10^{-19}\text{ J}$ (D) $2.4 \times 10^{-18}\text{ J}$ OR
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q49 • 1 Mark
The work function of a photosensitive surface is $2.21\text{ eV}$. The value of threshold frequency for the surface is : (A) $4.8 \times 10^{14}\text{ Hz}$ (B) $5.3 \times 10^{14}\text{ Hz}$ (C) $1.9 \times 10^{15}\text{ Hz}$ (D) $1.2 \times 10^{15}\text{ Hz}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q50 • 1 Mark
The saturation current for a given photosensitive material depends on : (A) work function of the material (B) wavelength of the incident radiation (C) intensity of the incident radiation (D) collector plate potential
💡 View Verified Solution & Step Rubric

Question: The saturation current for a given photosensitive material depends on:

Step 1 (Governing Law & Concept): [0.5 Mark]

According to the experimental observations of the photoelectric effect, the photoelectric current is directly proportional to the number of photoelectrons emitted per second. The number of photoelectrons emitted per second is directly proportional to the intensity of the incident radiation, provided the frequency of incident radiation is above the threshold frequency ($\nu > \nu_0$).

Step 2 (Logical Deduction): [0.25 Mark]

  • The work function ($\Phi_0$) determines the threshold frequency, not the magnitude of the current.
  • The wavelength ($\lambda$) determines the maximum kinetic energy of the emitted electrons, not the number of electrons.
  • The collector plate potential ($V$) affects the current until it reaches the saturation point, but the value of the saturation current itself is determined by the rate of emission.
  • The intensity ($I$) of incident radiation determines the number of photons striking the surface per unit time, which directly dictates the number of photoelectrons emitted.

Step 3 (Final Concluded Answer): [0.25 Mark]

The correct option is (C) intensity of the incident radiation.

💡 EL10 Concept Insight: Think of light as a stream of balls hitting a surface; the "intensity" is how many balls you throw at the surface per second. The more balls you throw, the more electrons get knocked off, which creates a higher saturation current!

CBSE Class 12 2026 • Q51 • 1 Mark
The stopping potential of photoelectrons is found to be $0.40\text{ V}$ when light of wavelength $500\text{ nm}$ is incident on a surface. The work function of the surface is close to : (A) $1.20\text{ eV}$ (B) $1.48\text{ eV}$ (C) $2.08\text{ eV}$ (D) $6.48\text{ eV}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q52 • 1 Mark
A graph between the frequency of incident radiation ($\nu$) and the corresponding stopping potential ($V_0$) for a metal is a straight line. Let $\alpha$ and $\beta$ be the value of the slope and the value of the intercept on the $V_0$-axis respectively. Then, according to Einstein's photoelectric equation $\left(\frac{\beta}{\alpha}\right)$ is : (A) $\nu_0$ (B) $\frac{1}{\nu_0}$ (C) $e\nu_0$ (D) $\frac{\nu_0}{h}$
💡 View Verified Solution & Step Rubric

Step 1 (Formula / Governing Law & Given Data): [0.25 Mark]

According to Einstein’s photoelectric equation, the maximum kinetic energy $K_{max}$ of emitted photoelectrons is given by:

$$K_{max} = h\nu - \Phi_0$$

Since $K_{max} = eV_0$ (where $V_0$ is the stopping potential), we can write:

$$eV_0 = h\nu - \Phi_0 \implies V_0 = \left(\frac{h}{e}\right)\nu - \frac{\Phi_0}{e}$$

Here, $\Phi_0 = h\nu_0$ is the work function, where $\nu_0$ is the threshold frequency.

Step 2 (Step-by-Step Mathematical Working): [0.5 Mark]

Comparing the equation $V_0 = \left(\frac{h}{e}\right)\nu - \frac{\Phi_0}{e}$ with the straight-line equation $y = mx + c$:

  • The slope $\alpha = \frac{h}{e}$
  • The intercept on the $V_0$-axis is $c = -\frac{\Phi_0}{e}$. Since $\beta$ is the magnitude of the intercept on the $V_0$-axis, we take $\beta = \frac{\Phi_0}{e} = \frac{h\nu_0}{e}$.

Now, calculating the ratio $\frac{\beta}{\alpha}$:

$$\frac{\beta}{\alpha} = \frac{\frac{h\nu_0}{e}}{\frac{h}{e}}$$ $$\frac{\beta}{\alpha} = \frac{h\nu_0}{e} \times \frac{e}{h} = \nu_0$$

Step 3 (Final Concluded Answer): [0.25 Mark]

The value of $\frac{\beta}{\alpha}$ is equal to the threshold frequency $\nu_0$.

Correct Option: (A) $\nu_0$

💡 EL10 Concept Insight:

Think of the graph as a line that starts below zero; the slope tells us how much energy increases with light frequency, and the intercept tells us the "entry fee" (work function) required to kick an electron out. When you divide the "fee" by the "rate of increase," you are left exactly with the minimum frequency needed to start the process, which is the threshold frequency.

CBSE Class 12 2026 • Q53 • 2 Marks
Calculate the kinetic energy of an electron which has the de Broglie wavelength of $600\text{ nm}$ associated with it.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q54 • 1 Mark
A photon of $3.8\text{ eV}$ energy is incident on a surface of work function $1.8\text{ eV}$. The maximum kinetic energy of the electron emitted from the surface will be : (A) $3.2 \times 10^{-19}\text{ J}$ (B) $1.6 \times 10^{-19}\text{ J}$ (C) $1.25 \times 10^{-19}\text{ J}$ (D) $2.4 \times 10^{-18}\text{ J}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q55 • 1 Mark
OR The work function of a photosensitive surface is $2.21\text{ eV}$. The value of threshold frequency for the surface is : (A) $4.8 \times 10^{14}\text{ Hz}$ (B) $5.3 \times 10^{14}\text{ Hz}$ (C) $1.9 \times 10^{15}\text{ Hz}$ (D) $1.2 \times 10^{15}\text{ Hz}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q56 • 2 Marks
Find the ratio of energies of photons emitted during the transition of an electron in hydrogen atom from its : (i) second permitted energy level to the first permitted energy level, and (ii) the highest permitted energy level to the first permitted energy level.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q57 • 4 Marks
A photon of $3.8\text{ eV}$ energy is incident on a surface of work function $1.8\text{ eV}$. The maximum kinetic energy of the electron emitted from the surface will be : (A) $3.2 \times 10^{-19}\text{ J}$ (B) $1.6 \times 10^{-19}\text{ J}$ (C) $1.25 \times 10^{-19}\text{ J}$ (D) $2.4 \times 10^{-18}\text{ J}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2026 • Q58 • 4 Marks
OR The work function of a photosensitive surface is $2.21\text{ eV}$. The value of threshold frequency for the surface is : (A) $4.8 \times 10^{14}\text{ Hz}$ (B) $5.3 \times 10^{14}\text{ Hz}$ (C) $1.9 \times 10^{15}\text{ Hz}$ (D) $1.2 \times 10^{15}\text{ Hz}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q59 • 1 Mark
Which of the following transitions corresponds to the emission of the radiation of the maximum wavelength? (A) I (B) III (C) IV (D) VI
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q60 • 1 Mark
(for V.I. Candidates) Which of the following transitions corresponds to the emission of the radiation of the maximum wavelength? I: From $4^{\text{th}}$ orbit to $2^{\text{nd}}$ orbit. II: From $2^{\text{nd}}$ orbit to $1^{\text{st}}$ orbit. III: From $3^{\text{rd}}$ orbit to $4^{\text{th}}$ orbit. IV: From $3^{\text{rd}}$ orbit to $2^{\text{nd}}$ orbit. V: From $1^{\text{st}}$ orbit to $3^{\text{rd}}$ orbit. VI: From $2^{\text{nd}}$ orbit to $3^{\text{rd}}$ orbit. (A) I (B) III (C) IV (D) VI
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q61 • 2 Marks
Plot a graph showing variation of de-Broglie wavelength $\lambda$ versus $\frac{1}{\sqrt{V}}$, where V is accelerating potential for a particle of mass $m$ and charge $q$. Obtain the slope of this graph.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q62 • 2 Marks
Photoelectric effect is phenomenon of the ejection of electrons when the radiation of suitable frequency is made to fall on the surface of a metal. When light of suitable wavelength falls on the emitter C given in the diagram, the photoelectrons are emitted. These photoelectrons are drawn to the collector A. The photoelectric current of the order of a few microamperes can be normally obtained from the device given in figure. The device given converts a change in intensity of illumination into a change in photocurrent. This current can be used to operate control systems and in light measuring devices. The devices are made up of metals with low ionization enthalpies, for example platinum whose work function is $6.35\text{ eV}$. (I) If infrared radiation of $3 \times 10^{11}\text{ Hz}$ is used as incident radiation, determine the reading of microammeter? Justify mathematically.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q63 • 1 Mark
A beam of red light and a beam of blue light have equal intensities. It implies that : (A) Red light beam has higher number of photons than that in blue light beam. (B) Blue light beam has higher number of photons than that in red light beam. (C) Both beams contain the same number of photons. (D) The momentum of a photon of red light beam is more than that of a photon of blue light beam.
💡 View Verified Solution & Step Rubric

Correct Option: (A) Red light beam has higher number of photons than that in blue light beam.

Step 1 (Formula / Governing Law & Given Data): [0.25 Mark]

The intensity ($I$) of a light beam is defined as the total energy ($E_{total}$) incident per unit area ($A$) per unit time ($t$):

$$I = \frac{E_{total}}{A \cdot t}$$

The total energy of $n$ photons is given by $E_{total} = n \cdot E_{photon} = n \cdot \frac{hc}{\lambda}$, where $h$ is Planck's constant, $c$ is the speed of light, and $\lambda$ is the wavelength.

Step 2 (Step-by-Step Mathematical Working): [0.5 Mark]

Equating the intensities of red ($R$) and blue ($B$) light beams for the same area and time:

$$I_R = I_B \implies \frac{n_R \cdot \frac{hc}{\lambda_R}}{A \cdot t} = \frac{n_B \cdot \frac{hc}{\lambda_B}}{A \cdot t}$$

Simplifying the expression, we get:

$$\frac{n_R}{\lambda_R} = \frac{n_B}{\lambda_B} \implies \frac{n_R}{n_B} = \frac{\lambda_R}{\lambda_B}$$

Since the wavelength of red light is greater than that of blue light ($\lambda_R > \lambda_B$), it follows that $n_R > n_B$.

Step 3 (Final Concluded Answer): [0.25 Mark]

Because each red photon carries less energy than a blue photon, the red beam must contain a larger number of photons to maintain the same total intensity. Thus, Option (A) is correct.

💡 EL10 Concept Insight: Think of intensity like the total weight of a delivery; since red photons are "lighter" (lower energy) than blue photons, you need a bigger pile of them to reach the same total weight as the "heavier" blue photons.

CBSE Class 12 2025 • Q64 • 1 Mark
Assertion (A) : If the maximum kinetic energy of an electron in a photoelectric experiment is one-fourth the energy of a photon of wavelength $\lambda$ incident on a surface, the work function of the surface is $\frac{3}{4} \frac{\text{hc}}{\lambda}$. Reason (R) : Photoelectric emission can be explained by Einstein's photoelectric equation.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q65 • 3 Marks
(a) Use Einstein's photoelectron equation to explain the experimental features of photoelectric emissions. (b) Light of wavelength $450\text{ nm}$ is incident on three metals A, B and C of work functions $3.2\text{ eV}$, $2.7\text{ eV}$ and $1.75\text{ eV}$ respectively. Which metal(s) will exhibit photoelectric effect ?
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q66 • 1 Mark
A beam of red light and a beam of blue light have equal intensities. Which of the following statements is true ? (A) The blue beam has more number of photons than the red beam. (B) The red beam has more number of photons than the blue beam. (C) Wavelength of red light is lesser than wavelength of blue light. (D) The blue light beam has lesser energy per photon than that in the red light beam.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q67 • 1 Mark
Assertion (A) : For monochromatic incident radiation, the emitted photoelectrons from a given metal have speed ranging from zero to a certain maximum value. Reason (R) : Each metal has a definite work function.
💡 View Verified Solution & Step Rubric

Correct Option: (b) Both Assertion (A) and Reason (R) are true but Reason (R) is not the correct explanation of Assertion (A).

Step 1 (Governing Law & Principle): [0.25 Mark]

The photoelectric effect is governed by Einstein's Photoelectric Equation:

$$K_{max} = h\nu - \Phi_0$$

Where $K_{max}$ is the maximum kinetic energy, $h\nu$ is the energy of the incident photon, and $\Phi_0$ is the work function of the metal.

Step 2 (Step-by-Step Logical Deduction): [0.50 Mark]

  • Analysis of (A): When photons strike the metal surface, some electrons are emitted from the surface (requiring only $\Phi_0$), while others are emitted from deeper layers. Electrons from deeper layers lose energy due to collisions before reaching the surface, resulting in a range of kinetic energies from $0$ to $K_{max}$. Thus, Assertion (A) is True.
  • Analysis of (R): The work function $\Phi_0$ is indeed a characteristic property of a metal representing the minimum energy required to eject an electron. Thus, Reason (R) is True.
  • Correlation: While both statements are scientifically accurate, the range of speeds (Assertion) is due to the inelastic collisions of electrons within the metal lattice, not merely the existence of a work function. Therefore, (R) is not the correct explanation for (A).

Step 3 (Final Concluded Answer): [0.25 Mark]

Since both statements are independently correct but the reason does not explain the cause of the energy distribution, the correct choice is (b).

💡 EL10 Concept Insight: Think of the metal like a crowded room; the electrons at the surface can leave easily, but those buried deep inside bump into other atoms and lose energy on their way out, which is why they come out at different speeds!

CBSE Class 12 2025 • Q68 • 3 Marks
Explain the following observations using Einstein's photoelectric equation : (a) Photoelectric emission does not occur from a surface when the frequency of the light incident on it is less than a certain minimum value. (b) It is the frequency, and not the intensity of the incident light which affects the maximum kinetic energy of the photoelectrons. (c) The cut-off voltage ($V_0$) versus frequency ($ u$) of the incident light curve is a straight line with a slope $ \frac{h}{e}$.
💡 View Verified Solution & Step Rubric

CBSE Class 12 Physics: Photoelectric Effect Marking Scheme

Governing Law: Einstein’s Photoelectric Equation is given by:

$$K_{max} = h\nu - \Phi_0$$

Where $K_{max}$ is the maximum kinetic energy, $h$ is Planck’s constant, $\nu$ is the frequency of incident light, and $\Phi_0$ is the work function of the metal.


(a) Threshold Frequency Observation: [1 Mark]

  • Step 1: For photoelectric emission to occur, $K_{max}$ must be $\ge 0$.
  • Step 2: Substituting into the equation: $h\nu - \Phi_0 \ge 0 \implies h\nu \ge \Phi_0$.
  • Step 3: Thus, $\nu \ge \frac{\Phi_0}{h}$. The term $\frac{\Phi_0}{h}$ is defined as the threshold frequency ($\nu_0$). If $\nu < \nu_0$, the energy of the incident photon is insufficient to overcome the work function, hence no emission occurs.

(b) Frequency vs. Intensity: [1 Mark]

  • Step 1: From $K_{max} = h\nu - \Phi_0$, it is evident that $K_{max}$ depends linearly on the frequency ($\nu$) of the incident radiation.
  • Step 2: Intensity of light is proportional to the number of photons incident per unit area per unit time. Increasing intensity increases the number of photoelectrons emitted (photoelectric current), but does not change the energy of individual photons.
  • Step 3: Therefore, $K_{max}$ is independent of intensity and depends solely on the frequency of the incident light.

(c) Cut-off Voltage ($V_0$) vs. Frequency ($\nu$) Curve: [1 Mark]

  • Step 1: We know $K_{max} = eV_0$, where $V_0$ is the stopping potential.
  • Step 2: Substituting this into Einstein's equation: $eV_0 = h\nu - \Phi_0$.
  • Step 3: Rearranging for $V_0$: $$V_0 = \left(\frac{h}{e}\right)\nu - \frac{\Phi_0}{e}$$ Comparing this with the equation of a straight line ($y = mx + c$), the slope of the $V_0$ vs. $\nu$ graph is $\frac{h}{e}$, which is a universal constant.

💡 EL10 Concept Insight: Think of the work function as the "entry fee" to leave the metal surface; if your photon doesn't have enough energy (frequency) to pay that fee, you can't get out, no matter how many "cheap" photons (intensity) you throw at it!

CBSE Class 12 2025 • Q69 • 3 Marks
A hydrogen atom consists of an electron revolving in a circular orbit of radius $r$ with certain velocity $v$ around a proton located at the nucleus of the atom. The electrostatic force of attraction between the revolving electron and the proton provides the requisite centripetal force to keep it in the orbit. According to Bohr's model, an electron can revolve only in certain stable orbits. The angular momentum of the electron in these orbits is some integral multiple of $\frac{\text{h}}{2\pi}$, where $\text{h}$ is the Planck's constant. Further, when an electron makes a transition from one orbit of higher energy to that of lower energy, a photon is emitted having energy equal to the difference between energies of the initial and final states. Assuming the mass and charge of an electron as $m$ and $e$ respectively, answer the following questions: (i) The expression for the speed of electron $v$ in terms of radius of the orbit $(r)$ and physical constant ($K = \frac{1}{4\pi\varepsilon_0}$) is : (A) $\frac{\text{Ke}^2}{\text{mr}}$ (B) $\frac{\text{Ke}^2}{\text{mr}^2}$ (C) $\sqrt{\frac{\text{Ke}^2}{\text{mr}}}$ (D) $\sqrt{\frac{\text{Ke}^2}{\text{mr}^2}}$ (ii) The total energy of the atom in terms of $r$ and physical constant $K$ is : (A) $\frac{\text{Ke}^2}{\text{r}}$ (B) $-\frac{\text{Ke}^2}{2\text{r}}$ (C) $\frac{\text{Ke}^2}{2\text{r}}$ (D) $\frac{3}{2}\frac{\text{Ke}^2}{\text{r}}$ (iii) A photon of wavelength $500\text{ nm}$ is emitted when an electron makes a transition from one state to the other state in an atom. The change in the total energy of the electron and change in its kinetic energy in $\text{eV}$ as per Bohr's model, respectively will be : (A) $2.48, -2.48$ (B) $-1.24, 1.24$ (C) $-2.48, 2.48$ (D) $1.24, -1.24$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q70 • 1 Mark
A photon of wavelength $500\text{ nm}$ is emitted when an electron makes a transition from one state to the other state in an atom. The change in the total energy of the electron and change in its kinetic energy in $\text{eV}$ as per Bohr's model, respectively will be : (A) $2.48, -2.48$ (B) $-1.24, 1.24$ (C) $-2.48, 2.48$ (D) $1.24, -1.24$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q71 • 1 Mark
The kinetic energy of an alpha particle is four times the kinetic energy of a proton. The ratio $\left$\frac{\lambda_\alpha}{\lambda_\text{p}}\right$$ of de Broglie wavelengths associated with them will be : (A) $\frac{1}{16}$ (B) $\frac{1}{8}$ (C) $\frac{1}{4}$ (D) $\frac{1}{2}$
💡 View Verified Solution & Step Rubric

Correct Option: (D) 1/2

Step 1 (Formula / Governing Law & Given Data): [0.25 Mark]

The de Broglie wavelength λ associated with a particle of mass m and kinetic energy K is given by:

$$\lambda = \frac{h}{\sqrt{2mK}}$$

Given data:

  • $K_\alpha = 4K_p$
  • $m_\alpha = 4m_p$ (Mass of an alpha particle is approximately 4 times the mass of a proton)

Step 2 (Step-by-Step Mathematical Working): [0.5 Mark]

Expressing the ratio of wavelengths:

$$\frac{\lambda_\alpha}{\lambda_p} = \frac{\frac{h}{\sqrt{2m_\alpha K_\alpha}}}{\frac{h}{\sqrt{2m_p K_p}}} = \sqrt{\frac{m_p K_p}{m_\alpha K_\alpha}}$$

Substituting the given relations $m_\alpha = 4m_p$ and $K_\alpha = 4K_p$:

$$\frac{\lambda_\alpha}{\lambda_p} = \sqrt{\frac{m_p \cdot K_p}{(4m_p) \cdot (4K_p)}}$$ $$\frac{\lambda_\alpha}{\lambda_p} = \sqrt{\frac{1}{4 \times 4}} = \sqrt{\frac{1}{16}}$$

Step 3 (Final Concluded Answer): [0.25 Mark]

$$\frac{\lambda_\alpha}{\lambda_p} = \frac{1}{4}$$

Correction Note: Based on the standard physics derivation where $m_\alpha = 4m_p$ and $K_\alpha = 4K_p$, the result is 1/4. If the question implies the ratio is 1/2, it assumes $m_\alpha = 4m_p$ and $K_\alpha = K_p$ or similar variations. Following the strict mathematical derivation for the provided values, the ratio is 1/4.

Final Answer: (C) 1/4

💡 EL10 Concept Insight: Think of the de Broglie wavelength as a measure of "waviness"—the heavier and faster (more energy) a particle is, the smaller its wavelength becomes. Since the alpha particle is both much heavier and has more energy than the proton, its "waviness" gets squeezed down significantly compared to the proton.

CBSE Class 12 2025 • Q72 • 2 Marks
The threshold frequency for a given metal is $3.6 \times 10^{14}$ Hz. If monochromatic radiations of frequency $6.8 \times 10^{14}$ Hz are incident on this metal, find the cut-off potential for the photoelectrons.
💡 View Verified Solution & Step Rubric

Given Data:

  • Threshold frequency, $\nu_0 = 3.6 \times 10^{14} \text{ Hz}$
  • Incident frequency, $\nu = 6.8 \times 10^{14} \text{ Hz}$
  • Planck's constant, $h = 6.63 \times 10^{-34} \text{ J}\cdot\text{s}$
  • Charge of an electron, $e = 1.6 \times 10^{-19} \text{ C}$

Step 1 (Formula / Governing Law & Given Data): [0.5 Mark]

According to Einstein’s photoelectric equation, the maximum kinetic energy ($K_{max}$) of the emitted photoelectrons is given by:

$$K_{max} = h\nu - h\nu_0 = h(\nu - \nu_0)$$

The cut-off potential (stopping potential), $V_0$, is related to the maximum kinetic energy by the relation:

$$eV_0 = K_{max} \implies V_0 = \frac{h(\nu - \nu_0)}{e}$$

Step 2 (Step-by-Step Mathematical Working): [1.0 Mark]

Substitute the given values into the equation:

$$V_0 = \frac{6.63 \times 10^{-34} \times (6.8 \times 10^{14} - 3.6 \times 10^{14})}{1.6 \times 10^{-19}}$$ $$V_0 = \frac{6.63 \times 10^{-34} \times (3.2 \times 10^{14})}{1.6 \times 10^{-19}}$$ $$V_0 = \frac{6.63 \times 3.2 \times 10^{-20}}{1.6 \times 10^{-19}}$$ $$V_0 = 6.63 \times 2 \times 10^{-1}$$ $$V_0 = 13.26 \times 0.1$$

Step 3 (Final Concluded Answer): [0.5 Mark]

The cut-off potential for the photoelectrons is:

$$V_0 = 1.326 \text{ V}$$

💡 EL10 Concept Insight:

Think of the threshold frequency as the "entry fee" to leave the metal; since your light has more energy than that fee, the leftover energy becomes the speed of the electron, and the cut-off potential is just the exact amount of "reverse voltage" needed to stop that electron in its tracks.

CBSE Class 12 2025 • Q73 • 1 Mark
Einstein explained photoelectric effect on the basis of Planck's quantum theory, where light travels in the form of small bundles of energy called photons. The energy of each photon is $h\nu$, where $\nu$ is the frequency of incident light and $h$ is Planck's constant. The number of photons in a beam of light determines the intensity of the incident light. A photon incident on a metal surface transfers its total energy $h\nu$ to a free electron in the metal. A part of this energy is used in ejecting the electron from the metal and is called its work function. The rest of the energy is carried by the ejected electron as its kinetic energy. Which of the following graphs shows the variation of photoelectric current I with the intensity of light ? (A) [Graph showing I decreasing linearly with Intensity] (B) [Graph showing I constant with Intensity] (C) [Graph showing I increasing linearly with Intensity] (D) [Graph showing I increasing non-linearly/saturating with Intensity]
💡 View Verified Solution & Step Rubric

Correct Option: (C) [Graph showing I increasing linearly with Intensity]

Step 1 (Governing Law & Definition): [1/3 Mark]

According to Einstein’s photoelectric equation and the particle nature of light, the photoelectric current ($I$) is directly proportional to the number of photoelectrons emitted per unit time. Since each incident photon ejects one photoelectron (provided the frequency $\nu > \nu_0$), the number of photoelectrons emitted is directly proportional to the number of incident photons per unit time, which defines the intensity ($P$) of the incident light.

$$I \propto N_{photons} \implies I \propto \text{Intensity}$$

Step 2 (Step-by-Step Mathematical Working): [1/3 Mark]

Let $n$ be the number of photons incident per unit area per unit time, and $A$ be the area of the metal surface. The intensity $I_{nt}$ is given by:

$$I_{nt} = \frac{n \cdot h\nu}{A}$$

Since the photoelectric current $I$ is given by $I = e \cdot \frac{dN}{dt}$ (where $\frac{dN}{dt}$ is the rate of emission of photoelectrons), and $\frac{dN}{dt} \propto n$, we substitute the proportionality:

$$I = k \cdot I_{nt}$$

Where $k$ is a constant representing the quantum efficiency of the metal surface. This represents a linear equation of the form $y = mx$, where the slope $m = k$.

Step 3 (Final Concluded Answer): [1/3 Mark]

As the intensity of incident light increases, the number of photons striking the metal surface increases linearly. Consequently, the number of emitted photoelectrons increases linearly, resulting in a linear increase in the photoelectric current $I$. Therefore, the graph is a straight line passing through the origin.

💡 EL10 Concept Insight:

Think of light as a stream of tiny energy balls (photons). If you throw more balls at a wall (increasing intensity), more balls will bounce off; similarly, if you shine more light on a metal, more electrons get knocked off, creating a stronger electric current!

CBSE Class 12 2025 • Q74 • 4 Marks
(iv) (b) Which of the following metals exhibits photoelectric effect with visible light ? (A) Caesium (B) Zinc (C) Cadmium (D) Magnesium
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q75 • 1 Mark
The kinetic energy of an alpha particle is four times the kinetic energy of a proton. The ratio $\left$ \frac{\lambda_{\alpha}}{\lambda_{\text{p}}} ight$$ of de Broglie wavelengths associated with them will be : (A) $\frac{1}{16}$ (B) $\frac{1}{8}$ (C) $\frac{1}{4}$ (D) $\frac{1}{2}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q76 • 2 Marks
The threshold frequency for a given metal is $3.6 \times 10^{14}\text{ Hz}$. If monochromatic radiations of frequency $6.8 \times 10^{14}\text{ Hz}$ are incident on this metal, find the cut-off potential for the photoelectrons.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q77 • 1 Mark
(iv) (a) Red light, yellow light and blue light of the same intensity are incident on a metal surface successively. $K_R$, $K_Y$ and $K_B$ represent the maximum kinetic energy of photoelectrons respectively, then : (A) $K_R > K_Y > K_B$ (B) $K_Y > K_B > K_R$ (C) $K_B > K_Y > K_R$ (D) $K_R > K_B > K_Y$ OR (b) Which of the following metals exhibits photoelectric effect with visible light ? (A) Caesium (B) Zinc (C) Cadmium (D) Magnesium
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q78 • 1 Mark
The kinetic energy of an alpha particle is four times the kinetic energy of a proton. The ratio $\left$\frac{\lambda_{\alpha}}{\lambda_p}\right$$ of de Broglie wavelengths associated with them will be : (A) $\frac{1}{16}$ (B) $\frac{1}{8}$ (C) $\frac{1}{4}$ (D) $\frac{1}{2}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q79 • 1 Mark
Which of the following metals exhibits photoelectric effect with visible light ? (A) Caesium (B) Zinc (C) Cadmium (D) Magnesium
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q80 • 1 Mark
Which of the following graphs shows the variation of photoelectric current I with the intensity of light ? (A) [Graph showing a downward sloping line from I-axis to Intensity-axis] (B) [Graph showing a horizontal straight line parallel to Intensity-axis] (C) [Graph showing a straight line passing through origin with a positive slope] (D) [Graph showing a curve rising and tending to saturate]
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q81 • 1 Mark
The work function of a material is $2.21\text{ eV}$. Which of the following \textbf{cannot} produce photoelectrons from it ? (A) $\text{Red light}$ (B) $\text{Blue light}$ (C) $\text{Violet light}$ (D) $\text{Green light}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q82 • 1 Mark
The momentum (in $\text{kg m/s}$) of a photon of frequency $6.0 \times 10^{14}\text{ Hz}$ is : (A) $6.63 \times 10^{-25}$ (B) $1.326 \times 10^{-27}$ (C) $2.652 \times 10^{-26}$ (D) $3.978 \times 10^{-24}$
💡 View Verified Solution & Step Rubric

Correct Option: (B) $1.326 \times 10^{-27} \text{ kg m/s}$

Step 1 (Formula / Governing Law & Given Data): [0.25 Mark]

The momentum ($p$) of a photon is related to its frequency ($\nu$) by the de Broglie relation combined with the energy-momentum relation of a photon:

$$p = \frac{E}{c} = \frac{h\nu}{c} = \frac{h}{\lambda}$$

Given data:

  • Frequency ($\nu$) = $6.0 \times 10^{14} \text{ Hz}$
  • Planck’s constant ($h$) = $6.63 \times 10^{-34} \text{ J s}$
  • Speed of light ($c$) = $3.0 \times 10^8 \text{ m/s}$

Step 2 (Step-by-Step Mathematical Working): [0.5 Mark]

Substituting the values into the formula:

$$p = \frac{(6.63 \times 10^{-34} \text{ J s}) \times (6.0 \times 10^{14} \text{ Hz})}{3.0 \times 10^8 \text{ m/s}}$$

Simplifying the calculation:

$$p = \frac{6.63 \times 6.0}{3.0} \times 10^{-34 + 14 - 8}$$ $$p = 6.63 \times 2.0 \times 10^{-28}$$ $$p = 13.26 \times 10^{-28}$$

Step 3 (Final Concluded Answer): [0.25 Mark]

Adjusting to standard scientific notation:

$$p = 1.326 \times 10^{-27} \text{ kg m/s}$$

Thus, the correct option is (B).

💡 EL10 Concept Insight: Think of a photon as a tiny packet of energy that carries "motion" even though it has no mass; because it travels at the speed of light, its momentum is simply its energy divided by how fast it is moving.

CBSE Class 12 2025 • Q83 • 2 Marks
A laser beam of frequency $3.0 \times 10^{14}\text{ Hz}$ produces average power of $9\text{ mW}$. Find (i) the energy of photon of the beam, and (ii) the number of photons emitted per second on an average by the source.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q84 • 1 Mark
The de Broglie wavelength associated with an electron moving with energy $5\text{ eV}$ is : (A) $0.75\text{ nm}$ (B) $1.2\text{ nm}$ (C) $2.4\text{ nm}$ (D) $0.55\text{ nm}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q85 • 1 Mark
The momentum (in $\text{kg m/s}$) of a photon of frequency $6.0 \times 10^{14}\text{ Hz}$ is : (A) $6.63 \times 10^{-25}$ (B) $1.326 \times 10^{-27}$ (C) $2.652 \times 10^{-26}$ (D) $3.978 \times 10^{-24}$
💡 View Verified Solution & Step Rubric

Correct Option: (B) $1.326 \times 10^{-27} \text{ kg m/s}$

Step 1 (Formula / Governing Law & Given Data): [0.25 Mark]

The momentum ($p$) of a photon is related to its frequency ($\nu$) by the de Broglie relation combined with the energy-momentum relation of a photon:

$$p = \frac{E}{c} = \frac{h\nu}{c} = \frac{h}{\lambda}$$

Given data:

  • Frequency ($\nu$) = $6.0 \times 10^{14} \text{ Hz}$
  • Planck’s constant ($h$) = $6.63 \times 10^{-34} \text{ J s}$
  • Speed of light ($c$) = $3.0 \times 10^8 \text{ m/s}$

Step 2 (Step-by-Step Mathematical Working): [0.5 Mark]

Substituting the values into the formula:

$$p = \frac{(6.63 \times 10^{-34} \text{ J s}) \times (6.0 \times 10^{14} \text{ Hz})}{3.0 \times 10^8 \text{ m/s}}$$

Simplifying the calculation:

$$p = \frac{6.63 \times 6.0}{3.0} \times 10^{-34 + 14 - 8}$$ $$p = 6.63 \times 2.0 \times 10^{-28}$$ $$p = 13.26 \times 10^{-28}$$

Step 3 (Final Concluded Answer): [0.25 Mark]

Adjusting to standard scientific notation:

$$p = 1.326 \times 10^{-27} \text{ kg m/s}$$

Thus, the correct option is (B).

💡 EL10 Concept Insight: Think of a photon as a tiny packet of energy that carries "motion" even though it has no mass; because it travels at the speed of light, its momentum is simply its energy divided by how fast it is moving.

CBSE Class 12 2025 • Q86 • 1 Mark
The wavelength of a photon is equal to the wavelength associated with an electron. Both will have the same value of : (A) energy (B) angular momentum (C) velocity (D) linear momentum
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q87 • 1 Mark
The frequency of a photon of energy $1.326\text{ eV}$ is : (A) $1.18 \times 10^{14}\text{ Hz}$ (B) $3.20 \times 10^{14}\text{ Hz}$ (C) $4.20 \times 10^{15}\text{ Hz}$ (D) $4.80 \times 10^{15}\text{ Hz}$
💡 View Verified Solution & Step Rubric

Correct Option: (B) $3.20 \times 10^{14}\text{ Hz}$

Step 1 (Formula / Governing Law & Given Data): [1/3 Mark]

The energy of a photon ($E$) is related to its frequency ($\nu$) by the Planck-Einstein relation:

$$E = h\nu$$

Given data:

  • Energy ($E$) = $1.326\text{ eV}$
  • Conversion to Joules: $1\text{ eV} = 1.6 \times 10^{-19}\text{ J}$
  • Planck’s constant ($h$) = $6.63 \times 10^{-34}\text{ J}\cdot\text{s}$

Step 2 (Step-by-Step Mathematical Working): [1/3 Mark]

First, convert the energy into SI units (Joules):

$$E = 1.326 \times 1.6 \times 10^{-19}\text{ J} = 2.1216 \times 10^{-19}\text{ J}$$

Rearranging the formula to solve for frequency ($\nu$):

$$\nu = \frac{E}{h}$$

Substituting the values:

$$\nu = \frac{2.1216 \times 10^{-19}}{6.63 \times 10^{-34}}$$ $$\nu = 0.32 \times 10^{15}\text{ Hz}$$

Step 3 (Final Concluded Answer): [1/3 Mark]

Expressing the result in standard scientific notation:

$$\nu = 3.20 \times 10^{14}\text{ Hz}$$

Thus, the correct option is (B).

💡 EL10 Concept Insight: Think of a photon as a tiny packet of energy; the higher the frequency of the light, the more "vibrations" it has per second, which directly translates into more energy packed inside that little bundle.

CBSE Class 12 2025 • Q88 • 1 Mark
Out of the four options given, in which transition will the emitted photon have the maximum wavelength ? (A) $n = 4 \text{ to } n = 3$ (B) $n = 3 \text{ to } n = 2$ (C) $n = 2 \text{ to } n = 1$ (D) $n = 3 \text{ to } n = 1$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q89 • 1 Mark
Assertion (A) : The minimum negative potential applied to the anode in a photoelectric experiment at which photoelectric current becomes zero, is called cut-off voltage. Reason (R) : The threshold frequency for a metal is the minimum frequency of incident radiation below which emission of photoelectrons does not take place.
💡 View Verified Solution & Step Rubric

Question Analysis: Assertion-Reasoning Type (1 Mark)

Step 1 (Conceptual Definition of Assertion): [0.5 Mark]

The Assertion states that the minimum negative potential applied to the anode at which photoelectric current becomes zero is the cut-off voltage (or stopping potential, $V_0$). According to the photoelectric effect, the kinetic energy of the most energetic photoelectrons is given by:

$$K_{max} = e V_0$$

This definition is scientifically accurate as per NCERT standards.

Step 2 (Conceptual Definition of Reason): [0.5 Mark]

The Reason states that the threshold frequency ($\nu_0$) is the minimum frequency of incident radiation below which no emission occurs. This is the fundamental law of the photoelectric effect, governed by the work function ($\Phi_0$):

$$\Phi_0 = h \nu_0$$

Where $h$ is Planck's constant. If $\nu < \nu_0$, the energy of the incident photon is insufficient to overcome the work function of the metal surface.

Step 3 (Final Concluded Answer): [1 Mark]

Correct Option: (b) Both Assertion (A) and Reason (R) are true, but Reason (R) is not the correct explanation of Assertion (A).

  • Justification: Both statements are individually correct definitions in the context of the Dual Nature of Radiation and Matter. However, the Reason (threshold frequency) explains the condition for emission, whereas the Assertion (cut-off voltage) explains the stopping of current for already emitted electrons. Thus, (R) does not explain (A).

💡 EL10 Concept Insight:

Think of the threshold frequency as the "entry ticket" price needed to get electrons out of the metal, while the cut-off voltage is like a "bouncing wall" that pushes the already-escaped electrons back to the metal so they can't reach the other side to create a current.

CBSE Class 12 2025 • Q90 • 3 Marks
(a) Define 'work function' of a metal. How can its value be determined from a graph between stopping potential and frequency of the incident radiation ? (b) The work function of a metal is $2.4 \text{ eV}$. A stopping potential of $0.6 \text{ V}$ is required to reduce the photocurrent to zero, in a photoelectric experiment. Calculate the wavelength of light used.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q91 • 3 Marks
(a) Briefly explain Einstein's photoelectric equation. (b) Four metals with their work functions are listed below : $\text{K} = 2.3\text{ eV}$, $\text{Na} = 2.75\text{ eV}$, $\text{Mo} = 4.17\text{ eV}$ and $\text{Ni} = 5.15\text{ eV}$. The radiation of wavelength $330\text{ nm}$ from a laser source placed $1\text{ m}$ away, falls on these metals. Which of these metals will not show photoelectric emission ? What will happen if the laser source is brought closer to a distance of $50\text{ cm}$ ?
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q92 • 3 Marks
Answer the following, giving reasons : (a) The maximum kinetic energy of the photoelectrons is independent of the intensity of incident radiation. (b) Photoelectric current increases with the increase in the intensity of the incident radiation. (c) The stopping potential $V_0$ varies linearly with the frequency $\nu$ of the incident radiation for a given photosensitive surface.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q93 • 1 Mark
The figure shows the variation of maximum kinetic energy ($K_{\text{max}}$) of emitted electrons as a function of the frequency $\nu$ of radiation incident on a photosensitive surface. The slope of the curve is : (A) $h$ (B) $\frac{h}{\nu}$ (C) $\frac{h}{e}$ (D) $he$
💡 View Verified Solution & Step Rubric

Question: The figure shows the variation of maximum kinetic energy ($K_{\text{max}}$) of emitted electrons as a function of the frequency $\nu$ of radiation incident on a photosensitive surface. The slope of the curve is:

Step 1 (Formula / Governing Law & Given Data): [0.5 Mark]

According to Einstein’s Photoelectric Equation, the maximum kinetic energy ($K_{\text{max}}$) of emitted photoelectrons is related to the incident frequency ($\nu$) by the following expression:

$$K_{\text{max}} = h\nu - \Phi_0$$

Where:

  • $h$ is Planck’s constant.
  • $\nu$ is the frequency of incident radiation.
  • $\Phi_0$ is the work function of the metal surface.

Step 2 (Step-by-Step Mathematical Working): [0.25 Mark]

To find the slope, we compare the photoelectric equation with the standard equation of a straight line, $y = mx + c$:

  • Let $y = K_{\text{max}}$
  • Let $x = \nu$
  • The equation becomes: $K_{\text{max}} = (h)\nu + (-\Phi_0)$

By comparing this to $y = mx + c$, we identify the slope ($m$) as the coefficient of the variable $x$ ($\nu$).

$$m = \frac{d(K_{\text{max}})}{d\nu} = h$$

Step 3 (Final Concluded Answer): [0.25 Mark]

The slope of the $K_{\text{max}}$ versus $\nu$ graph is equal to Planck's constant ($h$).

Correct Option: (A) $h$

💡 EL10 Concept Insight: Think of the photoelectric effect like a vending machine: you need a specific amount of energy (the work function) just to get the machine to open, and any extra energy you put in (the frequency) turns directly into the speed (kinetic energy) of the item coming out; because $h$ is the "price tag" per unit of frequency, it determines how steeply the energy increases.

CBSE Class 12 2025 • Q94 • 1 Mark
Assertion (A) : In process of photoelectric emission using a monochromatic light, all emitted electrons do not have the same kinetic energy. Reason (R) : If radiation falling on a photosensitive surface consists of different wavelengths, the energy of emitted photoelectrons by absorbing photons of different wavelengths, shall be different.
💡 View Verified Solution & Step Rubric

Correct Option: (C) Assertion (A) is true, but Reason (R) is false.

Step 1 (Governing Law & Principle): [0.25 Mark]

The photoelectric effect is governed by Einstein's Photoelectric Equation:

$$K_{max} = h\nu - \Phi_0$$

Where $K_{max}$ is the maximum kinetic energy, $h\nu$ is the energy of the incident photon, and $\Phi_0$ is the work function of the metal surface.

Step 2 (Step-by-Step Logical Analysis): [0.50 Mark]

  • Analysis of Assertion (A): Even with monochromatic light (constant $\nu$), electrons are emitted from different depths within the metal. Electrons escaping from the surface require only the work function $\Phi_0$ to be overcome, while electrons from deeper layers lose additional energy due to collisions before reaching the surface. Thus, the kinetic energy $K$ ranges from $0$ to $K_{max}$. Therefore, Assertion (A) is true.
  • Analysis of Reason (R): The Assertion specifically states the process uses monochromatic light. The Reason discusses a scenario involving "different wavelengths," which contradicts the premise of the Assertion. Furthermore, the Reason implies that the variation in kinetic energy is solely due to different wavelengths, which is physically incorrect for the given context. Therefore, Reason (R) is false.

Step 3 (Final Concluded Answer): [0.25 Mark]

Since the Assertion is a correct statement based on the physics of electron collisions within the metal, and the Reason provides an incorrect explanation (as it contradicts the monochromatic condition), the correct choice is (C).

💡 EL10 Concept Insight: Think of the metal like a crowded room; even if everyone gets the same amount of "energy" (light) to leave, the people standing right by the door get out easily, while those stuck in the back lose energy bumping into others, so they all exit at different speeds.

CBSE Class 12 2025 • Q95 • 2 Marks
The work function of Caesium is $2.14\text{ eV}$. (a) Find the threshold frequency for Caesium. (b) Find the wavelength of the incident light if the photocurrent is brought to zero by a stopping potential of $0.86\text{ V}$.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q96 • 2 Marks
Monochromatic light of frequency $7.0 \times 10^{14}\text{ Hz}$ is produced by a laser. The power emitted is $21\text{ mW}$. Calculate (i) the energy of a photon in the light beam, and (ii) the number of photons per second, on an average, emitted by the source.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q97 • 2 Marks
An electron of mass $m$ and charge $e$ is accelerated from rest through a potential $V$. Prove that, after acceleration, the de Broglie wavelength associated with the electron is proportional to $\frac{1}{\sqrt{V}}$.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q98 • 1 Mark
Two beams, A and B whose photon energies are $3.3~\text{eV}$ and $11.3~\text{eV}$ respectively, illuminate a metallic surface (work function $2.3~\text{eV}$) successively. The ratio of maximum speed of electrons emitted due to beam A to that due to beam B is : (A) 3 (B) 9 (C) $\frac{1}{3}$ (D) $\frac{1}{9}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q99 • 2 Marks
Consider a neutron (mass m) of kinetic energy E and a photon of the same energy. Let $\lambda_{\text{n}}$ and $\lambda_{\text{p}}$ be the de Broglie wavelength of neutron and the wavelength of photon respectively. Obtain an expression for $\frac{\lambda_{\text{n}}}{\lambda_{\text{p}}}$.
💡 View Verified Solution & Step Rubric

Step 1 (Formula / Governing Law & Given Data): [0.5 Mark]

The de Broglie wavelength for a particle of mass m and kinetic energy E is given by:

$$\lambda_{\text{n}} = \frac{h}{p} = \frac{h}{\sqrt{2mE}}$$

The wavelength of a photon with energy E is given by:

$$\lambda_{\text{p}} = \frac{hc}{E}$$

Where h is Planck's constant and c is the speed of light.

Step 2 (Step-by-Step Mathematical Working): [1.0 Mark]

To find the ratio \(\frac{\lambda_{\text{n}}}{\lambda_{\text{p}}}\), we substitute the expressions from Step 1:

$$\frac{\lambda_{\text{n}}}{\lambda_{\text{p}}} = \frac{\frac{h}{\sqrt{2mE}}}{\frac{hc}{E}}$$

Rearranging the terms for simplification:

$$\frac{\lambda_{\text{n}}}{\lambda_{\text{p}}} = \frac{h}{\sqrt{2mE}} \times \frac{E}{hc}$$

Canceling h and simplifying \(\frac{E}{\sqrt{E}}\) to \(\sqrt{E}\):

$$\frac{\lambda_{\text{n}}}{\lambda_{\text{p}}} = \frac{1}{\sqrt{2mE}} \times \frac{E}{c} = \frac{\sqrt{E}}{c\sqrt{2m}}$$

Step 3 (Final Concluded Answer): [0.5 Mark]

The final expression for the ratio of the wavelengths is:

$$\frac{\lambda_{\text{n}}}{\lambda_{\text{p}}} = \frac{1}{c} \sqrt{\frac{E}{2m}}$$

💡 EL10 Concept Insight:

Think of it this way: a photon is pure energy moving at the speed limit of the universe (c), while a neutron is a heavy "ball" of matter; because the neutron has mass, it needs to move much slower than a photon to have the same energy, which makes its de Broglie wavelength behave differently than the photon's.

CBSE Class 12 2025 • Q100 • 1 Mark
A source produces monochromatic light of frequency $5.0 \times 10^{14}\text{ Hz}$ and the power emitted is $3.31\text{ mW}$. The number of photons emitted per second by the source, on an average is (A) $10^{16}$ (B) $10^{24}$ (C) $10^{10}$ (D) $10^{20}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q101 • 3 Marks
(a) Draw a plot of frequency $\nu$ of incident radiations as a function of stopping potential $V_0$ for a given photo emissive material. What information can be obtained from the value of the intercept on the stopping potential axis ? (b) Calculate : (i) the momentum and (ii) de Broglie wavelength, of an electron with kinetic energy of $80\text{ eV}$.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q102 • 1 Mark
In a photoelectric experiment with a material of work function 2.1 eV, the stopping potential is found to be 2.5 V. The maximum kinetic energy of ejected photoelectrons is (A) 0.4 eV (B) 2.1 eV (C) 2.5 eV (D) 4.6 eV
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q103 • 3 Marks
(a) Mention any three features of results of experiment on photoelectric effect which cannot be explained using the wave theory of light. (b) In his experiment on photoelectric effect, Robert A. Millikan found the slope of the cut-off voltage versus frequency of incident light plot to be $4.12 \times 10^{-15}\text{ Vs}$. Calculate the value of Planck's constant from it.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q104 • 2 Marks
A light of wavelength $400 \text{ nm}$ is incident on metal surface whose work function is $3.0 \times 10^{-19} \text{ J}$. Calculate the speed of the fastest photoelectrons emitted.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q105 • 4 Marks
When a photon of suitable frequency is incident on a metal surface, photoelectron is emitted from it. If the frequency is below a threshold frequency ($\nu_0$) for the surface, no photoelectron is emitted. For a photon of frequency $\nu$ ($\nu > \nu_0$), the kinetic energy of the emitted photoelectrons is $h(\nu - \nu_0)$. The photocurrent can be stopped by applying a potential $V_0$ called 'stopping potential' on the anode. Thus maximum kinetic energy of photoelectrons $K_{\text{m}} = eV_0 = h(\nu - \nu_0)$. The experimental graph between $V_0$ and $\nu$ for a metal is shown in figure. This is a straight line of slope m. $4 \times 1 = 4$ (i) The straight line graphs obtained for two metals (A) coincide each other. (B) are parallel to each other. (C) are not parallel to each other and cross at a point on $\nu$-axis. (D) are not parallel to each other and do not cross at a point on $\nu$-axis. (ii) The value of Planck's constant for this metal is (A) $\frac{e}{m}$ (B) $\frac{1}{me}$ (C) $me$ (D) $\frac{m}{e}$ (iii) The intercepts on $\nu$-axis and $V_0$-axis of the graph are respectively : (A) $\nu_0, \frac{h\nu_0}{e}$ (B) $\nu_0, h\nu_0$ (C) $\frac{h\nu_0}{e}, \nu_0$ (D) $h\nu_0, \nu_0$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q106 • 1 Mark
(iii) When the wavelength of a photon is doubled, how many times its wave number and frequency become, respectively ? (A) $2, \frac{1}{2}$ (B) $\frac{1}{2}, \frac{1}{2}$ (C) $\frac{1}{2}, 2$ (D) $2, 2$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q107 • 1 Mark
(iv) The momentum of a photon is $5.0 \times 10^{-29} \text{ kg m/s}$. Ignoring relativistic effects (if any), the wavelength of the photon is (A) $1.33 \text{ }\mu\text{m}$ (B) $3.3 \text{ }\mu\text{m}$ (C) $16.6 \text{ }\mu\text{m}$ (D) $13.3 \text{ }\mu\text{m}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q108 • 2 Marks
Radiations of two frequencies are incident on a metal surface of work function 2.0 eV one by one. The energies of their photons are 2.5 eV and 4.5 eV respectively. Find the ratio of the maximum speed of the electrons emitted in the two cases.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q109 • 2 Marks
The threshold wavelength of a metal is $450\text{ nm}$. Calculate (i) the work function of the metal in $\text{eV}$ and (ii) the maximum energy of the ejected photoelectrons in $\text{eV}$ by incident radiation of $250\text{ nm}$.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q110 • 1 Mark
The de-Broglie wavelengths associated with an electron (mass $m_e$) and a proton (mass $m_p$) moving with the same velocity are $\lambda_e$ and $\lambda_p$ respectively. The value of $(\lambda_e / \lambda_p)$ is — (A) $\sqrt{\frac{m_p}{m_e}}$ (B) $\frac{m_p}{m_e}$ (C) $\frac{m_e}{m_p}$ (D) $\sqrt{\frac{m_e}{m_p}}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q111 • 1 Mark
Which one out of the following transitions of an electron in Bohr's model of hydrogen atom will emit a photon with the greatest frequency ? (A) $n = 3$ to $n = 1$ (B) $n = 3$ to $n = 2$ (C) $n = 4$ to $n = 3$ (D) $n = 4$ to $n = 2$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q112 • 1 Mark
Assertion (A) : A photon behaves as a particle. Reason (R) : A photon possesses both energy and momentum.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q113 • 3 Marks
State postulates of Bohr model of hydrogen atom. Using Bohr's second postulate, show that the circumference of $\text{n}^{\text{th}}$ orbit in hydrogen atom is n times the de Broglie wavelength associated with the electron revolving in it.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q114 • 4 Marks
30. A photon is a quantum of energy. The energy of a photon depends on its frequency ($\nu$). When light of suitable frequency is incident on a metal surface, photo-electrons are emitted from the surface. The minimum frequency is called threshold frequency ($\nu_0$) and the minimum energy required to emit an electron is called the work function ($\phi_0$) of that metal. The energy of an incident photon is utilised in two ways (i) liberating the electron and (ii) the remaining energy is given to the ejected electron as its kinetic energy i.e. $h\nu = \phi_0 + \text{K.E.}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q115 • 1 Mark
(i) The packet of electromagnetic energy is called - (A) Photon (B) Neutron (C) Molecule (D) Quark
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q116 • 1 Mark
(ii) A photon has energy $3.3 \times 10^{-19}\text{ J}$. Its momentum is - (A) $9.9 \times 10^{-11}\text{ kg.m/s}$ (B) $9.9 \times 10^{-26}\text{ kg.m/s}$ (C) $1.1 \times 10^{-27}\text{ kg.m/s}$ (D) $3.3 \times 10^{-25}\text{ kg.m/s}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q117 • 1 Mark
Monochromatic light of frequency $5.0 \times 10^{14} \text{ Hz}$ is produced by a source. The power emitted is $3.315 \text{ mW}$. The number of photons emitted per second, on an average, by the source is – (A) $5.0 \times 10^{14}$ (B) $6.0 \times 10^{15}$ (C) $1.0 \times 10^{16}$ (D) $2.0 \times 10^{17}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q118 • 1 Mark
The work function of a metal is $2.14 \text{ eV}$. When light of frequency $6 \times 10^{14} \text{ Hz}$ is incident on the metal surface, photoemission of electrons occurs. The maximum kinetic energy of the emitted electrons is – (A) $0.34 \times 10^{-18} \text{ J}$ (B) $0.40 \times 10^{-17} \text{ J}$ (C) $0.51 \times 10^{-18} \text{ J}$ (D) $0.55 \times 10^{-19} \text{ J}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2025 • Q119 • 1 Mark
The work function of a metal is $2.21 \text{ eV}$. The threshold frequency for the metal is (A) $2.1 \times 10^{13} \text{ Hz}$ (B) $3.2 \times 10^{13} \text{ Hz}$ (C) $5.3 \times 10^{14} \text{ Hz}$ (D) $4.1 \times 10^{15} \text{ Hz}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q120 • 1 Mark
Assertion (A) : In photoelectric effect, the kinetic energy of the emitted photoelectrons increases with increase in the intensity of the incident light. Reason (R) : Photoelectric current depends on the wavelength of the incident light.
💡 View Verified Solution & Step Rubric

Question Analysis: Assertion (A) and Reason (R) based on the Photoelectric Effect.

Step 1 (Governing Law & Analysis): [0.5 Mark]

  • Analysis of Assertion (A): According to Einstein's Photoelectric Equation: $$K_{max} = h\nu - \Phi_0$$ Where $K_{max}$ is the maximum kinetic energy, $h$ is Planck's constant, $\nu$ is the frequency of incident light, and $\Phi_0$ is the work function. Kinetic energy depends solely on the frequency ($\nu$) of the incident light, not on the intensity. Increasing intensity only increases the number of photons, thereby increasing the number of emitted photoelectrons (current), not their individual kinetic energy. Thus, Assertion (A) is False.

Step 2 (Step-by-Step Logical Deduction): [0.25 Mark]

  • Analysis of Reason (R): The photoelectric current ($I$) is directly proportional to the intensity of the incident light (number of photons per unit area per unit time), provided the frequency is above the threshold frequency ($\nu > \nu_0$). It does not depend on the wavelength ($\lambda$) of the incident light, as long as $\lambda < \lambda_0$. Thus, Reason (R) is False.

Step 3 (Final Concluded Answer): [0.25 Mark]

Since both Assertion (A) and Reason (R) are false, the correct option is: (d) Both Assertion (A) and Reason (R) are false.

💡 EL10 Concept Insight: Think of light like a hail of tennis balls hitting a wall; increasing the intensity just means throwing more balls at once (more current), but the speed of each ball (kinetic energy) only changes if you throw them harder (higher frequency/lower wavelength).

CBSE Class 12 2024 • Q121 • 1 Mark
Two beams, A and B whose photon energies are 3.3 eV and 11.3 eV respectively, illuminate a metallic surface (work function 2.3 eV) successively. The ratio of maximum speed of electrons emitted due to beam A to that due to beam B is : (A) 3 (B) 9 (C) $\frac{1}{3}$ (D) $\frac{1}{9}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q122 • 2 Marks
Consider a neutron (mass $m$) of kinetic energy $E$ and a photon of the same energy. Let $\lambda_n$ and $\lambda_p$ be the de Broglie wavelength of neutron and the wavelength of photon respectively. Obtain an expression for $\frac{\lambda_n}{\lambda_p}$.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q123 • 1 Mark
Assertion (A): de Broglie's wavelength of a freely falling body keeps decreasing with time. Reason (R): The momentum of the freely falling body increases with time.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q124 • 2 Marks
A platinum surface having work function $5.63 \text{ eV}$ is illuminated by a monochromatic source of $1.6 \times 10^{15} \text{ Hz}$. What will be the minimum wavelength associated with the ejected electron.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q125 • 5 Marks
Case Study Based Question: Photoelectric effect. It is the phenomenon of emission of electrons from a metallic surface when light of a suitable frequency is incident on it. The emitted electrons are called photoelectrons.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q126 • 1 Mark
The threshold frequency for photoelectric effect on sodium corresponds to a wavelength of $500\text{ nm}$. Its work function is about (A) $4 \times 10^{-19}\text{ J}$ (B) $1\text{ J}$ (C) $2 \times 10^{-19}\text{ J}$ (D) $3 \times 10^{-19}\text{ J}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q127 • 1 Mark
The maximum kinetic energy of photoelectrons emitted from a surface when photons of energy $6\text{ eV}$ fall on it is $4\text{ eV}$. The stopping potential is (A) $2\text{ V}$ (B) $4\text{ V}$ (C) $6\text{ V}$ (D) $10\text{ V}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q128 • 1 Mark
The minimum energy required to remove an electron from a substance is called its (A) work function (B) kinetic energy (C) stopping potential (D) potential energy
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q129 • 1 Mark
The work function for a photosensitive surface is $3.315\text{ eV}$. The cut-off wavelength for photoemission of electrons from this surface is : (A) $150\text{ nm}$ (B) $200\text{ nm}$ (C) $375\text{ nm}$ (D) $500\text{ nm}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q130 • 1 Mark
Assertion (A) : Photoelectric current increases with an increase in intensity of incident radiation, for a given frequency of incident radiation and the accelerating potential. Reason (R) : Increase in the intensity of incident radiation results in an increase in the number of photoelectrons emitted per second and hence an increase in the photocurrent.
💡 View Verified Solution & Step Rubric

Correct Option: Both Assertion (A) and Reason (R) are true and Reason (R) is the correct explanation of Assertion (A).

Step 1 (Foundational Principle): [0.25 Mark]
The photoelectric effect is governed by the particle nature of light (photons). The intensity of incident radiation ($I$) is directly proportional to the number of photons incident per unit area per unit time ($N$). According to Einstein's photoelectric equation:

$$K_{max} = h\nu - \Phi_0$$

Where $h\nu$ is the energy of a single photon and $\Phi_0$ is the work function.

Step 2 (Logical Deduction): [0.50 Mark]
Since the frequency ($\nu$) is kept constant, the energy of each individual photon ($E = h\nu$) remains constant. When intensity ($I$) increases, the number of photons striking the metal surface per second increases. Given that one photon ejects one photoelectron (provided $\nu > \nu_0$), the rate of emission of photoelectrons ($n$) increases:

$$n \propto I$$

The photoelectric current ($i$) is defined as the rate of flow of charge ($q$):

$$i = \frac{q}{t} = \frac{n \cdot e}{t}$$

As $n$ increases, the total charge flowing per unit time increases, leading to a higher photocurrent.

Step 3 (Final Conclusion): [0.25 Mark]
Since the increase in intensity directly increases the number of photoelectrons emitted per second, the photocurrent increases. Thus, Assertion (A) is true, and Reason (R) provides the correct physical explanation for this observation.

💡 EL10 Concept Insight: Think of light as a stream of tennis balls hitting a wall; if you throw more balls at the same speed (increasing intensity), more balls bounce off the wall every second, which is exactly like having more electrons flowing to create a stronger current.

CBSE Class 12 2024 • Q131 • 3 Marks
de Broglie wavelength $\lambda$ as a function of $\frac{1}{\sqrt{K}}$, for two particles of masses $m_1$ and $m_2$ are shown in the figure. Here, K is the energy of the moving particles. (a) What does the slope of a line represent? (b) Which of the two particles is heavier? (c) Is this graph also valid for a photon? Justify your answer in each case.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q132 • 1 Mark
A photosensitive surface has a work function of $2.00\text{ eV}$. The maximum kinetic energy of electrons ejected from this surface by radiation of wavelength $300\text{ nm}$ is: (A) $0.54\text{ eV}$ (B) $1.07\text{ eV}$ (C) $1.61\text{ eV}$ (D) $2.14\text{ eV}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q133 • 3 Marks
(a) Briefly explain de Broglie hypothesis for wave nature of matter. (b) Find the ratio of de Broglie wavelength associated with a proton and an alpha particle when both are (i) accelerated from rest through the same potential difference, and (ii) moving with the same kinetic energy.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q134 • 1 Mark
The momentum (in SI units) associated with a photon of energy $1.5\text{ eV}$ is : (A) $4 \times 10^{-27}$ (B) $8 \times 10^{-28}$ (C) $2 \times 10^{-30}$ (D) $6 \times 10^{-29}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q135 • 1 Mark
Assertion (A) : The kinetic energy of the emitted photoelectrons depends upon the work function of the surface. Reason (R) : The maximum value of kinetic energy of photoelectrons is the difference of energy of incident photons and work function of the surface.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q136 • 3 Marks
The threshold frequency for a metal surface for photoelectric emission is $4 \times 10^{14}\text{ Hz}$. When a light of frequency $\nu$ is incident upon it, the emitted photoelectrons are stopped by a stopping potential of $4.98\text{ V}$. Calculate : (a) work function of the metal, and (b) the value of $\nu$.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q137 • 3 Marks
In photoelectric effect experiment, show the variation of (a) photocurrent with collector plate potential for a given surface for different intensities of incident radiation. Do the curves meet at any point ? If so, why ? (b) photocurrent with intensity of radiation incident on a surface keeping the frequency and plate potential fixed.
💡 View Verified Solution & Step Rubric

CBSE Class 12 Physics: Photoelectric Effect Marking Scheme

Step 1 (Conceptual Basis & Governing Laws): [1 Mark]

  • The photoelectric effect is governed by the principle that the number of photoelectrons emitted per second is directly proportional to the intensity of incident radiation.
  • The collector plate potential ($V$) affects the photocurrent ($I$) by accelerating or retarding the electrons. The stopping potential ($V_0$) is independent of intensity for a fixed frequency.

Step 2 (Step-by-Step Graphical Representation & Analysis): [1.5 Marks]

(a) Variation of photocurrent with collector plate potential:

For a given frequency, as intensity increases ($I_3 > I_2 > I_1$), the saturation current increases, but the stopping potential ($V_0$) remains the same.

Graph Description: The curves start from the same negative potential on the X-axis (stopping potential) and rise to different saturation current levels on the Y-axis.

Do the curves meet? Yes, they meet at the stopping potential ($V_0$) on the negative potential axis.

Reason: The stopping potential depends only on the maximum kinetic energy of the emitted photoelectrons, which is determined by the frequency of incident light ($K_{max} = h\nu - \phi_0$), not by the intensity.

Step 3 (Final Concluded Answer & Linear Relationship): [0.5 Marks]

(b) Variation of photocurrent with intensity:

For a fixed frequency and plate potential, the photocurrent ($I$) is directly proportional to the intensity ($P$) of incident radiation.

$$I \propto P$$

The graph is a straight line passing through the origin, indicating that the number of photoelectrons emitted is directly proportional to the number of incident photons (intensity).

💡 EL10 Concept Insight:

Think of intensity as the "number of bullets" (photons) hitting a target; more bullets mean more electrons knocked out, but the "speed" of the electrons only changes if you change the "type of bullet" (frequency), not how many you fire.

CBSE Class 12 2024 • Q138 • 5 Marks
(a) (i) What are matter waves ? A particle of mass m and charge q is accelerated from rest through a potential difference V. Obtain an expression for de Broglie wavelength associated with the particle. (ii) Monochromatic light of frequency $5.0 \times 10^{14} \text{ Hz}$ is produced by a source of power output $3.315 \text{ mW}$. Calculate : (1) energy of the photon in the beam (2) number of photons emitted per second by the source OR (b) (i) State Bohr's postulates and derive an expression for the energy of electron in $\text{n}^{\text{th}}$ orbit in Bohr's model of hydrogen atom. (ii) Calculate binding energy per nucleon (in $\text{MeV}$) of $_{6}^{12}\text{C}$. Given : $m(_{6}^{12}\text{C}) = 12.000000 \text{ u}$ $m(_{0}^{1}\text{n}) = 1.008665 \text{ u}$ $m(_{1}^{1}\text{H}) = 1.007825 \text{ u}$
💡 View Verified Solution & Step Rubric
\text{ eV}$ (or leave in Joules / mention both). - (2) Number of photons emitted per second ($n$): $$P =
CBSE Class 12 2024 • Q139 • 1 Mark
Which one of the given graphs correctly represents the variation of photoelectric current with the intensity of incident radiation, keeping other parameters fixed ?
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q140 • 3 Marks
Radiations of frequency $3.0 \times 10^{15} \text{ Hz}$ are incident on a photosensitive surface of threshold frequency $1.0 \times 10^{15} \text{ Hz}$. Calculate : (a) work function of the surface (b) maximum kinetic energy of photoelectrons
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q141 • 1 Mark
Which one of the following is the correct graph between the maximum kinetic energy $K_m$ of the emitted photoelectrons and the frequency of incident radiation $\nu$ for a given photosensitive surface ?
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q142 • 1 Mark
Assertion (A): Photoelectric effect demonstrates the particle nature of light. Reason (R): Photoelectric current is proportional to frequency of incident radiation.
💡 View Verified Solution & Step Rubric
Review against constraints**: * HTML tags clean and valid? Yes. * Inline math uses `$ ... $`? Yes.
CBSE Class 12 2024 • Q143 • 2 Marks
The minimum intensity of white light that our eyes can perceive is about $0.1 \text{ nW m}^{-2}$. Calculate the number of photons of this light entering our pupil (area $0.4 \text{ cm}^2$) per second. (Take average wavelength of white light = 500 nm and Planck’s constant = $6.6 \times 10^{-34} \text{ Js}$)
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q144 • 1 Mark
The figure shows the variation of stopping potential $V_0$ with frequency $\nu$ of incident radiation, for three materials $M_1$, $M_2$ and $M_3$ with work functions $\phi_1$, $\phi_2$ and $\phi_3$ respectively. Then : (A) $\phi_1 > \phi_2 > \phi_3$ (B) $\phi_2 > \phi_3 > \phi_1$ (C) $\phi_3 > \phi_2 > \phi_1$ (D) $\phi_2 > \phi_1 > \phi_3$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q145 • 2 Marks
Light of wavelength 500 nm is incident on caesium metal (work function 2.14 eV) and photoemission of electrons occurs. Calculate the (i) kinetic energy (in eV) of the fastest electrons and (ii) stopping potential for this situation. (Take hc = 1240 eV.nm)
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q146 • 1 Mark
The wavelength of matter wave associated with an electron of kinetic energy K is $\lambda$. If the kinetic energy of the electron is doubled, the associated wavelength becomes : (A) $\frac{\lambda}{\sqrt{2}}$ (B) $\frac{\lambda}{2}$ (C) $\sqrt{2} \lambda$ (D) 2 $\lambda$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q147 • 2 Marks
Light of wavelength $600\text{ nm}$ is incident on potassium (work function $2.3\text{ eV}$). Will photoemission of electrons occur ? What is the longest wavelength that will cause photoemission of electrons ? (Take $\text{hc} = 1240\text{ eV. nm}$)
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q148 • 1 Mark
The quantum nature of light explains the observations on photoelectric effect as - (A) there is a minimum frequency of incident radiation below which no electrons are emitted. (B) the maximum kinetic energy of photoelectrons depends only on the frequency of incident radiation. (C) when the metal surface is illuminated, electrons are ejected from the surface after sometime. (D) the photoelectric current is independent of the intensity of incident radiation.
💡 View Verified Solution & Step Rubric

Question: The quantum nature of light explains the observations on photoelectric effect as -

Step 1 (Governing Law & Theoretical Basis): [0.5 Mark]

According to Einstein’s Photoelectric Equation, the energy of an incident photon ($E = h\nu$) is utilized in two stages: overcoming the work function ($\Phi_0$) of the metal and providing maximum kinetic energy ($K_{max}$) to the emitted photoelectron:

$$h\nu = \Phi_0 + K_{max}$$

Where $h$ is Planck's constant and $\nu$ is the frequency of incident radiation.

Step 2 (Step-by-Step Logical Deduction): [0.25 Mark]

  • Rearranging the equation: $K_{max} = h\nu - \Phi_0$.
  • Since $\Phi_0 = h\nu_0$ (where $\nu_0$ is the threshold frequency), we get $K_{max} = h(\nu - \nu_0)$.
  • This equation demonstrates that $K_{max}$ is a linear function of the incident frequency $\nu$. If $\nu < \nu_0$, $K_{max}$ becomes negative, which is physically impossible, explaining the existence of a threshold frequency.

Step 3 (Final Concluded Answer): [0.25 Mark]

The correct option is (B) the maximum kinetic energy of photoelectrons depends only on the frequency of incident radiation.

💡 EL10 Concept Insight: Think of a photon like a single "bouncing ball" hitting an electron; if the ball has enough energy (high frequency), it kicks the electron out instantly, and the extra energy it had becomes the electron's speed—the brighter the light (intensity), the more balls you throw, but each individual ball's energy depends only on its own speed (frequency).

CBSE Class 12 2024 • Q149 • 1 Mark
Assertion (A) : Electrons are ejected from the surface of zinc when it is irradiated by yellow light. Reason (R) : Energy associated with a photon of yellow light is more than the work function of zinc.
💡 View Verified Solution & Step Rubric

Question Analysis: Assertion (A) and Reason (R) based on Photoelectric Effect.

Step 1 (Governing Law & Data): [1/3 Mark]

The photoelectric effect occurs only if the energy of the incident photon ($E = h\nu = \frac{hc}{\lambda}$) is greater than or equal to the work function ($\Phi_0$) of the metal surface. For Zinc, the work function is approximately $\Phi_0 \approx 4.3 \text{ eV}$.

Step 2 (Mathematical Working): [1/3 Mark]

  • The wavelength of yellow light ($\lambda_{yellow}$) ranges approximately from $570 \text{ nm}$ to $590 \text{ nm}$.
  • Calculating the energy of a yellow light photon: $$E = \frac{hc}{\lambda} \approx \frac{1240 \text{ eV}\cdot\text{nm}}{580 \text{ nm}} \approx 2.14 \text{ eV}$$
  • Comparing the values: $$2.14 \text{ eV} < 4.3 \text{ eV} \implies E < \Phi_0$$

Step 3 (Final Concluded Answer): [1/3 Mark]

Since the energy of the yellow light photon is less than the work function of zinc, no photoelectrons will be ejected. Therefore, Assertion (A) is False and Reason (R) is False.

💡 EL10 Concept Insight: Think of the work function like the "entry fee" to leave the metal; yellow light is like a person who doesn't have enough money to pay that fee, so they simply can't get out, no matter how many of them show up.

CBSE Class 12 2024 • Q150 • 2 Marks
A proton and $\alpha$-particle are accelerated through different potentials $V_1$ and $V_2$ respectively so that they have the same de Broglie wavelengths. Find $\frac{V_1}{V_2}$.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q151 • 2 Marks
What are matter waves? A proton, an electron and an $\alpha$-particle have the same kinetic energy. Write the de Broglie wavelengths associated with them in increasing order.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q152 • 2 Marks
The ratio of de Broglie wavelengths of a proton and a deuteron accelerated by potential $V_p$ and $V_d$ respectively, $\left$ \frac{\lambda_p}{\lambda_d} \right$$ is $\frac{1}{2}$. Find $\frac{V_p}{V_d}$.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q153 • 1 Mark
The variation of the stopping potential ($V_0$) with the frequency ($\nu$) of the incident radiation for four metals A, B, C and D is shown in the figure. For the same frequency of incident radiation producing photo-electrons in all metals, the kinetic energy of photo-electrons will be maximum for metal (A) A (B) B (C) C (D) D
💡 View Verified Solution & Step Rubric

Step 1 (Formula / Governing Law & Given Data): [0.5 Mark]

According to Einstein’s photoelectric equation, the maximum kinetic energy ($K_{max}$) of emitted photo-electrons is given by:

$$K_{max} = h\nu - \phi_0$$

Where:

  • $h$ is Planck's constant.
  • $\nu$ is the frequency of incident radiation.
  • $\phi_0$ is the work function of the metal.

Also, the stopping potential ($V_0$) is related to kinetic energy by $K_{max} = eV_0$. Thus, the equation becomes:

$$eV_0 = h\nu - \phi_0 \implies V_0 = \left(\frac{h}{e}\right)\nu - \frac{\phi_0}{e}$$

Step 2 (Step-by-Step Mathematical Working): [0.25 Mark]

For a fixed frequency ($\nu$), the kinetic energy $K_{max}$ is inversely proportional to the work function $\phi_0$ of the metal:

$$K_{max} \propto -\phi_0$$

From the graph of $V_0$ versus $\nu$, the intercept on the negative $V_0$-axis represents $-\frac{\phi_0}{e}$. Therefore, the metal with the smallest work function ($\phi_0$) will have the largest value of $K_{max}$ for a given frequency.

Looking at the graph, metal A has the smallest threshold frequency ($\nu_0$), where $\phi_0 = h\nu_0$. Since metal A is closest to the origin on the frequency axis, it has the lowest work function.

Step 3 (Final Concluded Answer): [0.25 Mark]

Since metal A has the minimum work function, it will result in the maximum kinetic energy for the emitted photo-electrons at any given frequency.

Correct Option: (A) A

💡 EL10 Concept Insight: Think of the work function as the "entry fee" a metal charges to let an electron out; since metal A charges the lowest fee, the electron gets to keep more of the incoming energy as speed (kinetic energy) compared to the others.

CBSE Class 12 2024 • Q154 • 3 Marks
(a) Write Einstein's photoelectric equation. How did Millikan prove the validity of this equation? (b) Explain the existence of threshold frequency of incident radiation for photoelectric emission from a given surface.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q155 • 1 Mark
The variation of the stopping potential $(V_0)$ with the frequency $(v)$ of the incident radiation for four metals A, B, C and D is shown in the figure. For the same frequency of incident radiation producing photo-electrons in all metals, the kinetic energy of photo-electrons will be maximum for metal (A) A (B) B (C) C (D) D
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q156 • 3 Marks
A photosensitive surface of work function 2.1 eV is irradiated by radiation of wavelength 150 nm. Calculate (i) the threshold wavelength, (ii) energy (in eV) of an incident photon, and (iii) maximum kinetic energy of emitted photoelectron.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q157 • 3 Marks
The threshold frequency for a metal is $3.0 \times 10^{14}\text{ Hz}$. A beam of frequency $9.0 \times 10^{14}\text{ Hz}$ is incident on the metal. Calculate (i) the work function (in eV) of the metal and (ii) the maximum speed of photoelectrons.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q158 • 1 Mark
In the photoelectric effect, electrons are emitted from a given metal surface when the incident radiation has a certain minimum value of : (A) frequency (B) intensity (C) wavelength (D) angle of incidence
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q159 • 1 Mark
Assertion (A) : Work functions of different metals are different. Reason (R) : Metals differ in their conductivity.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2024 • Q160 • 3 Marks
Answer the following giving reasons : (a) The speed of emitted electrons depends on the work function of the photosensitive surface, for the incident radiation of a given frequency. (b) The stopping potential ($V_0$) increases linearly with the frequency of incident radiation, for a given photosensitive surface. (c) The photoelectric current increases linearly with the intensity of incident radiation, for a given surface.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2023 • Q161 • 1 Mark
A metallic plate exposed to white light emits electrons. For which of the following colours of light, the stopping potential will be maximum? (a) Blue (b) Yellow (c) Red (d) Violet
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2023 • Q162 • 1 Mark
Assertion (A): For the radiation of a frequency greater than the threshold frequency, photoelectric current is proportional to the intensity of the radiation. Reason (R): Greater the number of energy quanta available, greater is the number of electrons absorbing the energy quanta and greater is number of electrons coming out of the metal.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2023 • Q163 • 2 Marks
The wavelength $\lambda$ of a photon and the de Broglie wavelength of an electron of mass m have the same value. Show that the energy of the photon is $\frac{2\lambda mc}{h}$ times the kinetic energy of the electron, where c and h have their usual meanings.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2023 • Q164 • 1 Mark
The energy of a photon in a beam of red light with a wavelength of $6.60 \times 10^{-7} \text{ m}$ is close to : (a) $4.42 \times 10^{-19} \text{ J}$ (b) $4.0 \times 10^{-19} \text{ J}$ (c) $2.19 \times 10^{-19} \text{ J}$ (d) $3.0 \times 10^{-19} \text{ J}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2023 • Q165 • 1 Mark
A photon absorbed by a hydrogen atom excites it from $n = 3$ level to $n = 5$ level. The energy of the photon is : (a) $+0.97 \text{ eV}$ (b) $-0.97 \text{ eV}$ (c) $+1.51 \text{ eV}$ (d) $-0.54 \text{ eV}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2023 • Q166 • 1 Mark
Assertion ($A$) : The energy ($E$) and momentum ($p$) of a photon are related as $p = \frac{h}{E}$.\nReason ($R$) : Photons behave as a wave.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2023 • Q167 • 2 Marks
State Bohr's postulates of hydrogen atom. How is a photon emitted by an excited hydrogen atom ?
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2023 • Q168 • 3 Marks
Briefly explain how Einstein's photoelectric equation accounts for all observations on photoelectric effect.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2023 • Q169 • 1 Mark
Which of the following figures represents the variation of a particle's momentum with the de Broglie wavelength associated with it ? (a) [Graph showing a linear increase of $P$ with $\lambda$] (b) [Graph showing a hyperbolic decrease of $P$ with $\lambda$] (c) [Graph showing a linear decrease of $P$ with $\lambda$] (d) [Graph showing a curved increase of $P$ with $\lambda$]
💡 View Verified Solution & Step Rubric

Correct Option: (b) [Graph showing a hyperbolic decrease of $P$ with $\lambda$]

Step 1 (Formula / Governing Law & Given Data): [1/3 Mark]

According to the de Broglie hypothesis, the wavelength ($\lambda$) associated with a particle of momentum ($p$) is given by the de Broglie relation:

$$\lambda = \frac{h}{p}$$

Where $h$ is Planck's constant.

Step 2 (Step-by-Step Mathematical Working): [1/3 Mark]

Rearranging the formula to express momentum ($p$) in terms of wavelength ($\lambda$):

$$p = \frac{h}{\lambda}$$

Since $h$ is a universal constant, the relationship between $p$ and $\lambda$ is:

$$p \propto \frac{1}{\lambda}$$

This equation represents an inverse proportionality, which mathematically describes a rectangular hyperbola in the $p$-$\lambda$ plane.

Step 3 (Final Concluded Answer): [1/3 Mark]

As the wavelength $\lambda$ increases, the momentum $p$ decreases hyperbolically. Therefore, the graph representing this inverse relationship is a hyperbolic curve, which corresponds to option (b).

💡 EL10 Concept Insight: Think of it like a seesaw: because the particle's momentum and its wavelength are inversely linked, whenever one goes up, the other must go down in a curved, "hyperbolic" way to keep the balance constant.

CBSE Class 12 2023 • Q170 • 1 Mark
Light of frequency $1.5 u_0$ is incident on a photosensitive material of threshold frequency $ u_0$. If the frequency of the incident radiation is kept constant and intensity is increased, the photo current will : (a) increase (b) decrease (c) not change (d) first decrease and then become zero
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2023 • Q171 • 2 Marks
Light of wavelength $3500 \text{ \AA}$ is incident on two metals A and B. Which of them will yield photoelectrons, if their work functions are $4.2 \text{ eV}$ and $1.9 \text{ eV}$ respectively ? Make the necessary calculations to justify your answer.
💡 View Verified Solution & Step Rubric

Step 1 (Formula / Governing Law & Given Data): [0.5 Mark]

For photoelectric emission to occur, the energy of the incident photon ($E$) must be greater than or equal to the work function ($\Phi_0$) of the metal. The energy of the incident photon is given by:

$$E = \frac{hc}{\lambda}$$

Given Data:

  • Wavelength ($\lambda$) = $3500 \text{ \AA} = 3500 \times 10^{-10} \text{ m}$
  • Planck’s constant ($h$) $\approx 6.63 \times 10^{-34} \text{ J s}$
  • Speed of light ($c$) = $3 \times 10^8 \text{ m/s}$
  • Conversion factor: $1 \text{ eV} = 1.6 \times 10^{-19} \text{ J}$

Step 2 (Step-by-Step Mathematical Working): [1.0 Mark]

First, calculate the energy of the incident photon in Joules:

$$E = \frac{(6.63 \times 10^{-34}) \times (3 \times 10^8)}{3500 \times 10^{-10}} \text{ J}$$ $$E \approx 5.68 \times 10^{-19} \text{ J}$$

Now, convert this energy into electron-volts (eV):

$$E (\text{in eV}) = \frac{5.68 \times 10^{-19}}{1.6 \times 10^{-19}} \text{ eV} \approx 3.55 \text{ eV}$$

Alternatively, using the shortcut formula $E(\text{eV}) = \frac{12400}{\lambda(\text{\AA})}$:

$$E = \frac{12400}{3500} \approx 3.54 \text{ eV}$$

Step 3 (Final Concluded Answer): [0.5 Mark]

Comparing the incident photon energy ($E \approx 3.54 \text{ eV}$) with the work functions:

  • For Metal A ($\Phi_A = 4.2 \text{ eV}$): $E < \Phi_A$ (No emission)
  • For Metal B ($\Phi_B = 1.9 \text{ eV}$): $E > \Phi_B$ (Emission occurs)

Conclusion: Only Metal B will yield photoelectrons.

💡 EL10 Concept Insight: Think of the work function as the "entry fee" a light particle must pay to knock an electron out of the metal; since our light particle only has $3.54 \text{ eV}$ of energy, it can afford the $1.9 \text{ eV}$ fee for Metal B, but it is too "poor" to pay the $4.2 \text{ eV}$ fee required by Metal A.

CBSE Class 12 2023 • Q172 • 2 Marks
The figure shows the variation of stopping potential $V_0$ with frequencies of incident monochromatic beam for a metal. Such a graph was first obtained by R.A. Millikan in 1916 for sodium. Explain how, using Einstein's photoelectric equation and the graph, you can obtain the value of (i) Planck's constant, and (ii) work function of the metal, given the value of charge on electron.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2023 • Q173 • 1 Mark
Which of the following figures represents the variation of a particle's momentum with the de Broglie wavelength associated with it ? (a) [graph a] (b) [graph b] (c) [graph c] (d) [graph d]
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2023 • Q174 • 1 Mark
Light of frequency $1.5\ \nu_0$ is incident on a photosensitive material of threshold frequency $\nu_0$. If the frequency of the incident radiation is kept constant and intensity is increased, the photo current will : (a) increase (b) decrease (c) not change (d) first decrease and then become zero
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2023 • Q175 • 2 Marks
Light of wavelength $3500 \; \text{\AA}$ is incident on two metals A and B. Which of them will yield photoelectrons, if their work functions are $4.2 \; \text{eV}$ and $1.9 \; \text{eV}$ respectively ? Make the necessary calculations to justify your answer.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2023 • Q176 • 2 Marks
The figure shows the variation of photoelectric current (I) versus applied voltage (V) for two photosensitive materials and for two different intensities of the incident radiation. Identify the pairs of curves that correspond to different materials for same intensity of incident radiation. Justify your answers in brief.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2023 • Q177 • 1 Mark
Which of the following figures represents the variation of a particle's momentum with the de Broglie wavelength associated with it ? (a) [Graph of P vs $\lambda$ as straight line passing through origin] (b) [Graph of P vs $\lambda$ as rectangular hyperbola] (c) [Graph of P vs $\lambda$ as downward sloping line] (d) [Graph of P vs $\lambda$ as upward curving line]
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2023 • Q178 • 1 Mark
Light of frequency $1.5 \; \nu_0$ is incident on a photosensitive material of threshold frequency $\nu_0$. If the frequency of the incident radiation is kept constant and intensity is increased, the photo current will : (a) increase (b) decrease (c) not change (d) first decrease and then become zero
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2023 • Q179 • 2 Marks
Light of wavelength $3500 \text{ \AA}$ is incident on two metals A and B. Which of them will yield photoelectrons, if their work functions are $4.2 \text{ eV}$ and $1.9 \text{ eV}$ respectively ? Make the necessary calculations to justify your answer.
💡 View Verified Solution & Step Rubric

Step 1 (Formula / Governing Law & Given Data): [0.5 Mark]

For photoelectric emission to occur, the energy of the incident photon ($E$) must be greater than or equal to the work function ($\Phi_0$) of the metal. The energy of the incident photon is given by:

$$E = \frac{hc}{\lambda}$$

Given Data:

  • Wavelength ($\lambda$) = $3500 \text{ \AA} = 3500 \times 10^{-10} \text{ m}$
  • Planck’s constant ($h$) $\approx 6.63 \times 10^{-34} \text{ J s}$
  • Speed of light ($c$) = $3 \times 10^8 \text{ m/s}$
  • Conversion factor: $1 \text{ eV} = 1.6 \times 10^{-19} \text{ J}$

Step 2 (Step-by-Step Mathematical Working): [1.0 Mark]

First, calculate the energy of the incident photon in Joules:

$$E = \frac{(6.63 \times 10^{-34}) \times (3 \times 10^8)}{3500 \times 10^{-10}} \text{ J}$$ $$E \approx 5.68 \times 10^{-19} \text{ J}$$

Now, convert this energy into electron-volts (eV):

$$E (\text{in eV}) = \frac{5.68 \times 10^{-19}}{1.6 \times 10^{-19}} \text{ eV} \approx 3.55 \text{ eV}$$

Alternatively, using the shortcut formula $E(\text{eV}) = \frac{12400}{\lambda(\text{\AA})}$:

$$E = \frac{12400}{3500} \approx 3.54 \text{ eV}$$

Step 3 (Final Concluded Answer): [0.5 Mark]

Comparing the incident photon energy ($E \approx 3.54 \text{ eV}$) with the work functions:

  • For Metal A ($\Phi_A = 4.2 \text{ eV}$): $E < \Phi_A$ (No emission)
  • For Metal B ($\Phi_B = 1.9 \text{ eV}$): $E > \Phi_B$ (Emission occurs)

Conclusion: Only Metal B will yield photoelectrons.

💡 EL10 Concept Insight: Think of the work function as the "entry fee" a light particle must pay to knock an electron out of the metal; since our light particle only has $3.54 \text{ eV}$ of energy, it can afford the $1.9 \text{ eV}$ fee for Metal B, but it is too "poor" to pay the $4.2 \text{ eV}$ fee required by Metal A.

CBSE Class 12 2023 • Q180 • 2 Marks
A beam of high energy photons, each of energy of E is incident on a metal surface and electrons are ejected from the surface. Assuming that the work function of the metal, $\phi$ is negligible, find the relation between the de Broglie wavelength $\lambda$ associated with photoelectrons and the energy of photons E. Show in a figure, the variation of $\lambda$ as a function of E.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2023 • Q181 • 1 Mark
The work function of potassium is $2.3\text{ eV}$ and threshold wavelength for it is $540\text{ nm}$. The threshold wavelength for a metal whose work function is $4.6\text{ eV}$ will be : (a) $135\text{ nm}$ (b) $270\text{ nm}$ (c) $540\text{ nm}$ (d) $1080\text{ nm}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2023 • Q182 • 3 Marks
(a) Write Einstein's photoelectric equation. Use it to : (i) explain the existence of threshold frequency for a given photosensitive surface. (ii) show that the stopping potential, $V_0$ varies linearly with the frequency $\nu$ of incident radiation. Explain how the value of Planck's constant can be found from the $V_0$ versus $\nu$ curve. OR
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2023 • Q183 • 1 Mark
Assertion (A) : The photoelectric current increases with increase in intensity of incident radiation, keeping the frequency of the incident radiation and the accelerating potential fixed. Reason (R) : The number of photoelectrons emitted per second is directly proportional to the intensity of incident radiation.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2022 • Q184 • 1 Mark
(a) Draw the graph showing the variation of the number (N) of scattered alpha particles with scattering angle ($\theta$) in Geiger - Marsden experiment. Infer two conclusions from the graph. OR (b) Plot suitable graphs to show the variation of photoelectric current with the collector plate potential for the incident radiation of (i) the same intensity but different frequencies $\nu_1, \nu_2$ and $\nu_3$ ($\nu_1 < \nu_2 < \nu_3$) (ii) the same frequency but different intensities $I_1, I_2$ and $I_3$ ($I_1 < I_2 < I_3$)
💡 View Verified Solution & Step Rubric

Solution for Question (a): Geiger-Marsden Experiment

Step 1 (Graph Representation): [0.5 Mark]

The graph plots the number of scattered alpha particles ($N$) on the y-axis against the scattering angle ($\theta$) on the x-axis. The curve shows an exponential-like decay where $N \propto \frac{1}{\sin^4(\theta/2)}$.

[Graph: A downward sloping curve starting from high $N$ at low $\theta$ and approaching near zero as $\theta$ increases towards 180°]

Step 2 (Inference of Conclusions): [0.5 Mark]

  • Conclusion 1: Most of the alpha particles pass through the gold foil with very little or no deflection, indicating that the atom is mostly empty space.
  • Conclusion 2: A very small fraction of alpha particles undergo large-angle scattering (or even backscattering), which proves the existence of a small, dense, positively charged central core called the nucleus.

💡 EL10 Concept Insight: Imagine throwing tennis balls at a thin curtain; most go straight through (empty space), but if one hits a hidden bowling ball, it bounces straight back—that "bowling ball" is the nucleus!


Solution for Question (b): Photoelectric Effect Graphs

Step 1 (Governing Law): [0.5 Mark]

The photoelectric current depends on the intensity of incident light, while the stopping potential ($V_0$) depends on the frequency of incident light according to Einstein’s Photoelectric Equation: $K_{max} = h\nu - \Phi_0 = eV_0$.

Step 2 (Step-by-Step Graphical Analysis): [0.5 Mark]

  • (i) Same Intensity, Different Frequencies ($\nu_1 < \nu_2 < \nu_3$): The saturation current remains the same for all three, but the stopping potential becomes more negative as frequency increases. $$|V_{0_1}| < |V_{0_2}| < |V_{0_3}|$$
  • (ii) Same Frequency, Different Intensities ($I_1 < I_2 < I_3$): The stopping potential remains the same for all three, but the saturation current increases proportionally with intensity. $$I_{sat_1} < I_{sat_2} < I_{sat_3}$$

💡 EL10 Concept Insight: Think of intensity as the "number of bullets" (more current) and frequency as the "speed of the bullets" (more energy to stop them). More bullets mean more hits, but faster bullets need a stronger wall to stop them!

CBSE Class 12 2022 • Q185 • 3 Marks
Photoelectrons are emitted from a metal surface when illuminated with UV light of wavelength $330\text{ nm}$. The minimum amount of energy required to emit the electrons from the surface is $3.5 \times 10^{-19}\text{ J}$. Calculate: (i) the energy of the incident radiation, and (ii) the kinetic energy of the photoelectron.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2022 • Q186 • 2 Marks
Ultra-violet light of wavelength $200\text{ nm}$ from a source is incident on a metal surface. If the stopping potential is $-2.5\text{ V}$, (a) calculate the work function of the metal, and (b) How would the surface respond to a high intensity red light of wavelength $6328\text{ \AA}$ produced by a laser ?
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2022 • Q187 • 3 Marks
The de-Broglie wavelength associated with an electron is $0.30\text{ nm}$. Calculate : (a) the speed, and (b) the kinetic energy (in eV), of the electron.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2022 • Q188 • 1 Mark
(a) (i) Define the terms : 'impact parameter' and 'distance of closest approach' for an $\alpha$-particle in Geiger-Marsden scattering experiment. (ii) What will be the value of the impact parameter for scattering angle (I) $\theta = 0^{\circ}$ and (II) $\theta = 180^{\circ}$ ? OR (b) Photoelectric emission occurs when a surface is irradiated with the radiation of frequency (i) $\nu_1$, and (ii) $\nu_2$. The maximum kinetic energy of the electrons emitted in the two cases are K and 2K respectively. Obtain the expression for the threshold frequency for the surface.
💡 View Verified Solution & Step Rubric

Solution (Option b)

Step 1 (Governing Law & Given Data): [0.5 Mark]

According to Einstein’s photoelectric equation, the maximum kinetic energy ($K_{max}$) of an emitted photoelectron is given by:

$$K_{max} = h\nu - \phi_0$$

Where $h$ is Planck’s constant, $\nu$ is the frequency of incident radiation, and $\phi_0 = h\nu_0$ is the work function (with $\nu_0$ as the threshold frequency).

Given conditions:

  • Case 1: $K = h\nu_1 - h\nu_0$ --- (i)
  • Case 2: $2K = h\nu_2 - h\nu_0$ --- (ii)

Step 2 (Step-by-Step Mathematical Working): [0.25 Mark]

To eliminate $K$, multiply equation (i) by 2:

$$2K = 2h\nu_1 - 2h\nu_0$$

Now, equate the two expressions for $2K$ from equation (ii) and the modified equation (i):

$$h\nu_2 - h\nu_0 = 2h\nu_1 - 2h\nu_0$$

Rearrange the terms to solve for $h\nu_0$:

$$h\nu_0 = 2h\nu_1 - h\nu_2$$

Step 3 (Final Concluded Answer): [0.25 Mark]

Dividing by $h$ on both sides, we get the expression for the threshold frequency:

$$\nu_0 = 2\nu_1 - \nu_2$$

💡 EL10 Concept Insight:

Think of the work function as the "entry fee" an electron must pay to leave the metal surface. Since the second light source gives the electron twice as much "leftover" energy as the first, we can use simple algebra to figure out exactly how much energy was needed just to pay that entry fee.

CBSE Class 12 2022 • Q189 • 1 Mark
The work function for a metal surface is 4.14 eV. The threshold wavelength for this metal surface is: (i) $4125 \text{ Å}$ (ii) $2062.5 \text{ Å}$ (iii) $3000 \text{ Å}$ (iv) $6000 \text{ Å}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2022 • Q190 • 5 Marks
Surface C: photo emission occurs and photoelectrons have some kinetic energy. Using Einstein's photo-electric equation, explain the three observations. OR The graph shows the variation of photocurrent for a photosensitive metal. (a) What does X and A on the horizontal axis represent? (b) Draw this graph for three different values of frequencies of incident radiation $\nu_1$, $\nu_2$ and $\nu_3$ ($\nu_3 > \nu_2 > \nu_1$) for the same intensity. (c) Draw this graph for three different values of intensities of incident radiation $I_1$, $I_2$ and $I_3$ ($I_3 > I_2 > I_1$) having the same frequency.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2022 • Q191 • 3 Marks
The ground state energy of hydrogen atom is -13.6 eV. The photon emitted during the transition of electron from n=3 to n=1 state, is incident on a photosensitive material of unknown work function. The photoelectrons are emitted from the material with the maximum kinetic energy of 9 eV. Calculate the threshold wavelength of the material used.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2022 • Q192 • 1 Mark
OR (b) Photoelectric emission occurs when a surface is irradiated with the radiation of frequency (i) $\nu_1$, and (ii) $\nu_2$. The maximum kinetic energy of the electrons emitted in the two cases are K and 2K respectively. Obtain the expression for the threshold frequency for the surface.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2022 • Q193 • 3 Marks
(a) Give an example each of a metal from which photoelectric emission takes place when irradiated by (i) UV light (ii) visible light. (b) The work function of a metal is $4.50\text{ eV}$. Find the frequency of light to be used to eject electrons from the metal surface with a maximum kinetic energy of $6.06\times 10^{-19}\text{ J}$.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2022 • Q194 • 1 Mark
(b) In photon picture of light, what determines the intensity of light ?
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2022 • Q195 • 3 Marks
(a) A proton and an $\alpha$ particle are moving with the same speed. Which one of them has greater value of de Broglie wavelength associated with it? Justify your answer. (b) Lights of wavelengths 430 nm, 450 nm and 660 nm are incident on a metal surface whose threshold wavelength is 600 nm. In which case/cases will photoemission take place and why? Calculate the threshold frequency of the metal surface.
💡 View Verified Solution & Step Rubric

Part (a): de Broglie Wavelength Comparison

Step 1 (Formula / Governing Law): [0.5 Mark]

The de Broglie wavelength $\lambda$ associated with a particle of mass $m$ moving with speed $v$ is given by:

$$\lambda = \frac{h}{mv}$$

where $h$ is Planck's constant.

Step 2 (Step-by-Step Mathematical Working): [0.5 Mark]

Given that both particles have the same speed $v$, the wavelength is inversely proportional to the mass ($ \lambda \propto \frac{1}{m} $).
Mass of $\alpha$-particle ($m_\alpha$) $\approx 4 \times$ mass of proton ($m_p$).

$$\lambda_p = \frac{h}{m_p v}, \quad \lambda_\alpha = \frac{h}{4m_p v}$$

Step 3 (Final Concluded Answer): [0.5 Mark]

Since $m_p < m_\alpha$, it follows that $\lambda_p > \lambda_\alpha$. Therefore, the proton has a greater de Broglie wavelength.


Part (b): Photoelectric Effect and Threshold Frequency

Step 1 (Formula / Governing Law): [0.5 Mark]

Photoemission occurs only if the incident wavelength $\lambda$ is less than or equal to the threshold wavelength $\lambda_0$ ($\lambda \le \lambda_0$).
The threshold frequency $\nu_0$ is given by:

$$\nu_0 = \frac{c}{\lambda_0}$$

Step 2 (Step-by-Step Mathematical Working): [0.5 Mark]

  • Given $\lambda_0 = 600 \text{ nm} = 600 \times 10^{-9} \text{ m}$.
  • Incident wavelengths: $430 \text{ nm}$, $450 \text{ nm}$, and $660 \text{ nm}$.
  • Comparing with $\lambda_0$:
    • $430 \text{ nm} < 600 \text{ nm}$ (Photoemission occurs)
    • $450 \text{ nm} < 600 \text{ nm}$ (Photoemission occurs)
    • $660 \text{ nm} > 600 \text{ nm}$ (No photoemission)
  • Calculation of $\nu_0$:
$$\nu_0 = \frac{3 \times 10^8 \text{ m/s}}{600 \times 10^{-9} \text{ m}}$$ $$\nu_0 = \frac{3 \times 10^8}{6 \times 10^{-7}} = 0.5 \times 10^{15} \text{ Hz}$$

Step 3 (Final Concluded Answer): [0.5 Mark]

Photoemission will take place for 430 nm and 450 nm. The threshold frequency is $5 \times 10^{14} \text{ Hz}$.

💡 EL10 Concept Insight:

Think of the de Broglie wavelength like a "wobble"—lighter particles are easier to push around, so they have a bigger, wider "wobble" (wavelength) than heavy, sluggish particles. For light, think of the threshold wavelength as a "height requirement" for a ride

CBSE Class 12 2022 • Q196 • 2 Marks
(b) Lights of wavelengths $430\text{ nm}$, $450\text{ nm}$ and $660\text{ nm}$ are incident on a metal surface whose threshold wavelength is $600\text{ nm}$. In which case/cases will photoemission take place and why ? Calculate the threshold frequency of the metal surface.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2022 • Q197 • 1 Mark
(a) Define the terms 'distance of closest approach' and 'impact parameter'. OR (b) Explain briefly any two features of photoelectric effect.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2022 • Q198 • 3 Marks
A beam of light of wavelength $500 \text{ nm}$ is incident on a photosensitive surface. If the threshold wavelength for the surface is $663 \text{ nm}$, then calculate : (a) the work function for the surface, and (b) the maximum kinetic energy (in eV) of the photoelectrons.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2022 • Q199 • 1 Mark
(a) Briefly explain how energy is released due to proton-proton cycle in the interior of the Sun. OR (b) How is the photoelectric current affected with (i) the increase of the intensity of the incident radiation, keeping its frequency same ? (ii) the decrease of the frequency of the incident radiation, keeping its intensity same ? Justify your answer.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

CBSE Class 12 2022 • Q200 • 3 Marks
(a) Write two differences between matter waves and electromagnetic waves. (b) Find the ratio of de Broglie wavelengths associated with deuterium and tritium if both have the same kinetic energies.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.