Complete archive of 75 authentic CBSE Class 12 Physics past exam questions for Electromagnetic Waves (2022–2026). Free chapterwise practice with step marking schemes and verified solutions.
75 Canonical Problems • 0.0% Official Answers Verified • 22.7% Step Solutions Available
Zero Speculation Standard • Unverified marked explicitly
Authentic Examination Questions (75 Problems)
CBSE Class 12 2026 • Q1• 1 Mark
Electromagnetic waves used in a diagnostic tool in medicine have a wavelength range
(A) $1\text{ nm to } 10^{-3}\text{ nm}$
(B) $400\text{ nm to } 1\text{ nm}$
(C) $1\text{ mm to } 700\text{ nm}$
(D) $0.1\text{ m to } 1\text{ mm}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
Electromagnetic waves used for purification of water are
(A) X-rays
(B) Ultraviolet rays
(C) Infrared rays
(D) Ultrasonic rays
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
Welders wear special glass goggles or face masks with glass windows to protect their eyes from
(A) Infrared rays
(B) Ultraviolet rays
(C) X-rays
(D) Microwaves
💡 View Verified Solution & Step Rubric
Question: Welders wear special glass goggles or face masks with glass windows to protect their eyes from:
Step 1 (Governing Principle): [0.5 Mark]
The process of welding involves an electric arc that produces high-intensity electromagnetic radiation. According to the properties of the electromagnetic spectrum, the high-temperature electric arc emits significant amounts of Ultraviolet (UV) radiation. These rays are harmful to human tissue, specifically the cornea and retina of the eye, as they possess high photon energy given by:
$$E = h\nu = \frac{hc}{\lambda}$$
where $h$ is Planck's constant, $\nu$ is the frequency, and $\lambda$ is the wavelength.
Step 2 (Deduction and Reasoning): [0.25 Mark]
Exposure to high-intensity UV radiation can cause a painful condition known as 'welder's flash' or photokeratitis. Standard glass or specialized filters are used in goggles because they have high absorption coefficients for UV radiation, effectively shielding the eyes by preventing the transmission of these short-wavelength photons ($10^{-7} \text{ m} < \lambda < 4 \times 10^{-7} \text{ m}$) to the sensitive ocular structures.
Step 3 (Final Concluded Answer): [0.25 Mark]
The correct option is (B) Ultraviolet rays.
💡 EL10 Concept Insight: Think of a welding arc like a tiny, super-bright sun; just like you wear sunglasses to block harmful invisible rays from the sun, welders wear special masks because the arc shoots out invisible "UV" light that can literally give your eyes a painful sunburn.
The phenomenon of interference is shown by
(A) longitudinal mechanical wave only
(B) transverse mechanical wave only
(C) electromagnetic waves only
(D) all these waves
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
Name the electromagnetic waves which are used for
(i) detection of fractures in bones
(ii) physiotherapy
(iii) radar systems
Also write their wavelength range.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
Name the electromagnetic waves which are used
(i) as a diagnostic tool in medicine
(ii) in remote switches for TV sets
(iii) in water purifiers
Also write their wavelength range.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
Name the electromagnetic waves which are (i) also known as 'heat waves', (ii) used in LASIK eye surgery, (iii) used to destroy cancer cells. Also write their wavelength range.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
Choose the correct statement :
(A) Visible light has higher frequencies and shorter wavelengths than that of X-rays.
(B) Visible light has lower frequencies and shorter wavelengths than that of X-rays.
(C) Visible light has higher frequencies and longer wavelengths than that of X-rays.
(D) Visible light has lower frequencies and longer wavelengths than that of X-rays.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
Assertion (A) : The ultraviolet light is replaced by X-rays in a photoelectric experiment. The kinetic energy of the emitted electrons decreases.
Reason (R) : Frequency of X-rays is less than that of ultraviolet light.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
(a) Only an accelerated charge can produce an electromagnetic wave. Explain. (b) What is the difference between conduction current and displacement current ?
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
Assertion (A) : Displacement current does not have the same physical effect as the conduction current. Reason (R) : The concept of displacement current is introduced only to satisfy Kirchhoff's rules.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
(a) A sinusoidal electromagnetic wave of frequency $40 \text{ MHz}$ travels in free space in the $x$-direction. Calculate the wavelength and time period of the wave.
(b) At some point and at some instant the electric field in the above electromagnetic wave has its maximum value of $750 \text{ N/C}$ and is along the y-axis. Calculate the magnitude and direction of the magnetic field at this position and time.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
What are infrared waves? Why are these waves referred to as 'heat waves'? Give any two uses of these waves.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
What are microwaves ? How are they produced ? Give any two uses of microwaves.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
What are X-rays ? How are they produced ? Give two uses of X-rays.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
Differentiate between conduction current and displacement current. A capacitor is connected across a source providing time-dependent current. Explain how the total current at an instant is the sum of conduction current and displacement current in the circuit at that instant.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
Which of the following is also referred to as 'heat waves' ?
(A) Gamma rays
(B) X-rays
(C) UV rays
(D) Infrared rays
💡 View Verified Solution & Step Rubric
Question: Which of the following is also referred to as 'heat waves'?
Step 1 (Foundational Concept): [0.5 Mark]
According to the Electromagnetic Spectrum properties defined in NCERT Physics, Infrared rays are produced by hot bodies and molecules. Due to this characteristic, they are commonly known as heat waves. They are primarily responsible for the greenhouse effect, which traps thermal energy.
Step 2 (Deductive Reasoning): [0.25 Mark]
(A) Gamma rays: High-frequency radiation used in cancer therapy.
(B) X-rays: Used for diagnostic imaging in medicine.
(C) UV rays: High-energy radiation causing chemical reactions and skin tanning.
(D) Infrared rays: Possess frequencies in the range of $10^{11} \text{ Hz}$ to $4 \times 10^{14} \text{ Hz}$, which excite the vibrational motion of atoms and molecules, resulting in the heating effect.
Step 3 (Final Concluded Answer): [0.25 Mark]
The correct option is (D) Infrared rays.
💡 EL10 Concept Insight: Think of infrared rays like the invisible "warmth" you feel when you stand near a campfire or a heater; even though you can't see the rays, your skin senses them as heat because they make the molecules in your body wiggle faster!
Step 1 (Governing Law & Electromagnetic Spectrum Order): [0.5 Mark]
The electromagnetic spectrum is arranged in order of increasing frequency (or decreasing wavelength). According to the standard NCERT electromagnetic spectrum classification, the frequencies follow the order:
💡 EL10 Concept Insight: Think of the electromagnetic spectrum like a musical scale; Gamma-rays are the "highest pitch" (highest frequency) notes, while X-rays are a bit lower, and UV rays are lower still. Just remember that the more dangerous and energetic the radiation is, the higher its frequency!
Which of the following statement is true for the radio waves and the gamma rays?
(A) The energy of gamma rays is lesser than that of the radio waves.
(B) The frequency of the radio waves is higher than that of gamma rays.
(C) The radio waves and the gamma rays have the same energy.
(D) The energy of radio waves is lesser than that of the gamma rays.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
In free space, which of the following quantities is always larger for X-rays than for a radio wave ?
(A) Speed
(B) Frequency
(C) Amplitude
(D) Wavelength
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
How are electromagnetic waves produced ? Write any two characteristics of electromagnetic waves. Give one use each of :
(a) radio waves
(b) microwaves.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
The amplitude of electric field in an electromagnetic wave in free space is $1000\text{ Vm}^{-1}$. The amplitude of the magnetic field in this electromagnetic wave is :
(A) $3.0 \times 10^{-3}\text{ T}$
(B) $3.33 \times 10^{-8}\text{ T}$
(C) $3.0 \times 10^{11}\text{ T}$
(D) $3.33 \times 10^{-6}\text{ T}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
(a) State any three characteristics of electromagnetic waves.
(b) Briefly explain how and where the displacement current exists during the charging of a capacitor.
💡 View Verified Solution & Step Rubric
(a) Characteristics of Electromagnetic Waves (1.5 Marks)
Step 1 (Foundational Principles): [0.5 Mark per point]
Electromagnetic waves are produced by accelerated or oscillating charges.
They do not require any material medium for propagation; they can travel through a vacuum.
In free space, they travel with a constant speed $c$, given by the relation:
$$c = \frac{1}{\sqrt{\mu_0 \epsilon_0}} \approx 3 \times 10^8 \, \text{m/s}$$
They are transverse in nature, where the oscillating electric field ($\vec{E}$) and magnetic field ($\vec{B}$) vectors are mutually perpendicular to each other and to the direction of wave propagation.
(b) Displacement Current in a Charging Capacitor (1.5 Marks)
Step 1 (Governing Law): [0.5 Mark]
The displacement current ($I_d$) arises due to the time-varying electric field between the plates of a capacitor. It is defined by the rate of change of electric flux ($\phi_E$):
$$I_d = \epsilon_0 \frac{d\phi_E}{dt}$$
Step 2 (Step-by-Step Working): [0.5 Mark]
As the capacitor charges, the charge $q$ on the plates increases with time. The electric field $E$ between the plates is given by $E = \frac{q}{A\epsilon_0}$. The electric flux through the area $A$ is:
$$\phi_E = E \cdot A = \left( \frac{q}{A\epsilon_0} \right) A = \frac{q}{\epsilon_0}$$
Substituting this into the displacement current formula:
The displacement current exists in the region between the capacitor plates where the electric field is changing. It ensures the continuity of the total current in the circuit, as $I_d$ between the plates is exactly equal to the conduction current $I_c$ flowing through the connecting wires.
💡 EL10 Concept Insight: Think of the displacement current as a "virtual" current that bridges the gap between capacitor plates; even though no electrons physically jump across the empty space, the changing electric field acts just like a moving charge to keep the circuit's current flowing smoothly.
Which of the following rays coming from the Sun plays an important role in maintaining the Earth's warmth ?
(A) Infrared rays
(B) $\gamma$ rays
(C) UV rays
(D) Visible light rays
💡 View Verified Solution & Step Rubric
Question: Which of the following rays coming from the Sun plays an important role in maintaining the Earth's warmth?
Step 1 (Governing Principle): [0.5 Mark]
The Earth's warmth is primarily maintained by the Greenhouse Effect. Solar radiation consists of various electromagnetic waves. While visible light passes through the atmosphere to heat the Earth's surface, the surface re-radiates this energy as Infrared (IR) radiation. Greenhouse gases (like $CO_2$ and $CH_4$) in the atmosphere are highly effective at absorbing these infrared rays, trapping the heat and preventing it from escaping into space.
Step 2 (Analysis of Options): [0.25 Mark]
(A) Infrared rays: These are thermal radiations associated with heat energy. They are absorbed by greenhouse gases, maintaining the Earth's temperature.
(B) $\gamma$ rays: These are high-energy ionizing radiations absorbed by the upper atmosphere; they do not contribute to surface warmth.
(C) UV rays: These are absorbed by the ozone layer and are primarily responsible for chemical reactions and skin damage, not thermal trapping.
(D) Visible light rays: While these provide light, they are not the primary mechanism for "trapping" heat in the atmosphere.
Step 3 (Final Concluded Answer): [0.25 Mark]
The correct option is (A) Infrared rays.
💡 EL10 Concept Insight: Think of the Earth like a car parked in the sun; the sunlight goes through the windows, but the heat gets trapped inside because the glass doesn't let the heat waves back out easily. Infrared rays are those "heat waves" that get trapped by our atmosphere, keeping our planet cozy instead of freezing cold!
Because X-rays possess the smallest wavelength in the provided list, they must possess the highest momentum. Therefore, (A) X-rays is the correct answer.
💡 EL10 Concept Insight: Think of momentum like the "punch" of a photon; because X-rays have the shortest, most tightly packed waves, they carry the most energy and the biggest punch compared to long, lazy radio waves.
Assertion (A) : X-rays are produced when slow moving electrons are stopped by a metal target of high atomic number.
Reason (R) : X-rays consist of low-energy photons.
💡 View Verified Solution & Step Rubric
Question: Assertion (A) : X-rays are produced when slow moving electrons are stopped by a metal target of high atomic number. Reason (R) : X-rays consist of low-energy photons.
Step 1 (Analysis of Assertion): [0.5 Mark]
The production of X-rays occurs via Bremsstrahlung (braking radiation). This process requires high-speed (fast-moving) electrons to be suddenly decelerated by the strong electrostatic field of the nuclei of a high atomic number ($Z$) target material. Since the assertion states "slow moving electrons," the statement is False.
Step 2 (Analysis of Reason): [0.5 Mark]
X-rays are electromagnetic waves with very short wavelengths ($\lambda \approx 0.01 \text{ nm to } 10 \text{ nm}$). According to the Planck-Einstein relation:
$$E = h\nu = \frac{hc}{\lambda}$$
Because the wavelength $\lambda$ is extremely small, the energy $E$ of X-ray photons is very high. Therefore, the statement that X-rays consist of low-energy photons is False.
Step 3 (Final Concluded Answer): [0 Mark]
Correct Option: (d) Both Assertion (A) and Reason (R) are false statements.
💡 EL10 Concept Insight: Think of X-rays like a high-speed car hitting a brick wall; you need a very fast car (high-speed electron) to create a massive crash (high-energy X-ray photon). Since the assertion uses "slow" electrons and the reason claims X-rays are "low-energy," both statements are factually incorrect.
Name the electromagnetic wave used (i) in radar, (ii) in eye surgery and (iii) as diagnostic tool in medicine. Write their wavelength range also.
💡 View Verified Solution & Step Rubric
Question: Name the electromagnetic wave used (i) in radar, (ii) in eye surgery and (iii) as diagnostic tool in medicine. Write their wavelength range also.
Step 1 (Identification of Electromagnetic Waves): [1 Mark]
Based on the properties of the electromagnetic spectrum as per NCERT standards, the waves are identified as follows:
(i) Radar: Microwaves
(ii) Eye Surgery: Ultraviolet (UV) rays
(iii) Diagnostic tool in medicine: X-rays
Step 2 (Wavelength Range Specification): [1.5 Marks]
The wavelength ranges ($\lambda$) for these specific electromagnetic waves are defined as:
$$10^{-13} \, \text{m} \text{ to } 10^{-8} \, \text{m}$$
💡 EL10 Concept Insight: Think of the electromagnetic spectrum like a musical scale; just as different notes have different pitches, these waves have different "sizes" (wavelengths) that make them perfect for specific jobs—like how microwaves bounce off planes to find them, or how tiny X-rays are small enough to slip through your skin but get stopped by your dense bones.
Assertion (A) : X-rays are produced when slow moving electrons are stopped by a metal target of high atomic number.\nReason (R) : X-rays consist of low-energy photons.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
Questions number 13 to 16 are Assertion (A) and Reason (R) type questions. Two statements are given — one labelled Assertion (A) and the other labelled Reason (R). Select the correct answer from the codes (A), (B), (C) and (D) as given below.
(A) Both Assertion (A) and Reason (R) are true and Reason (R) is the correct explanation of the Assertion (A).
(B) Both Assertion (A) and Reason (R) are true, but Reason (R) is not the correct explanation of the Assertion (A).
(C) Assertion (A) is true, but Reason (R) is false.
(D) Both Assertion (A) and Reason (R) are false.
Assertion (A) : X-rays are produced when slow moving electrons are stopped by a metal target of high atomic number.
Reason (R) : X-rays consist of low-energy photons.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
Assertion (A) : EM waves do not require a medium for their propagation.
Reason (R) : EM waves are transverse waves.
💡 View Verified Solution & Step Rubric
Correct Option: (b) Both Assertion (A) and Reason (R) are true, but Reason (R) is not the correct explanation of Assertion (A).
Step 1 (Foundational Concept): [0.5 Mark]
The Assertion (A) is based on the nature of electromagnetic (EM) waves. According to Maxwell's equations, EM waves are produced by oscillating charges, which create time-varying electric fields ($\vec{E}$) and magnetic fields ($\vec{B}$). These fields regenerate each other in free space, allowing propagation without a material medium.
Step 2 (Analysis of Reason): [0.25 Mark]
The Reason (R) states that EM waves are transverse. This is true because the electric field vector $\vec{E}$ and magnetic field vector $\vec{B}$ oscillate perpendicular to each other and perpendicular to the direction of wave propagation ($\vec{k}$):
$$\vec{E} \perp \vec{B} \perp \vec{k}$$
Step 3 (Final Conclusion): [0.25 Mark]
While both statements are scientifically accurate, the fact that EM waves are transverse (Reason) is not the cause for their ability to travel through a vacuum. Their ability to travel through a vacuum is due to the self-sustaining nature of the oscillating fields. Therefore, (R) is not the correct explanation for (A).
💡 EL10 Concept Insight:
Think of EM waves like a self-propelling relay race: the electric field creates a magnetic field, which then creates an electric field, allowing the wave to "walk" through empty space all by itself! Being "transverse" just describes the shape of the wave's wiggle, not the reason it doesn't need a medium.
(a) Differentiate between 'conduction current' and 'displacement current', giving one similarity and one dissimilarity between them.
(b) Explain the existence of electromagnetic waves in free space, using the concept of displacement current.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
(a) How are electromagnetic waves produced ?
(b) Write the wavelength range and one use of :
(i) Microwaves, and
(ii) Ultraviolet waves.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
Electromagnetic radiation used to kill germs in water purifiers is :
(A) Microwaves
(B) Ultraviolet rays
(C) Gamma rays
(D) Radio waves
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
Welders wear special glass goggles or face masks with glass windows to protect their eyes from :
(A) UV rays
(B) X-rays
(C) IR rays
(D) Gamma rays
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
Which of the following electromagnetic waves are known as 'heat waves' ?
(A) UV rays
(B) IR rays
(C) X-rays
(D) Gamma rays
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
In the four regions, I, II, III and IV, the electric fields are described as :
Region I : $E_x = E_0 \sin $kz - \omega t$$
Region II : $E_x = E_0$
Region III : $E_x = E_0 \sin kz$
Region IV : $E_x = E_0 \cos kz$
The displacement current will exist in the region :
(A) I
(B) IV
(C) II
(D) III
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
(a) “The wavelength of the electromagnetic wave is often correlated with the characteristic size of the system that radiates.” Give two examples to justify this statement.
(b) (i) Long distance radio broadcasts use short-wave bands. Why ?
(ii) Optical and radio telescopes are built on the ground, but X-ray astronomy is possible only from satellites orbiting the Earth. Why ?
💡 View Verified Solution & Step Rubric
(a) Correlation between Wavelength and System Size
Step 1 (Governing Principle): [0.5 Mark] The wavelength ($\lambda$) of electromagnetic radiation is typically of the same order of magnitude as the physical dimensions of the source or the system interacting with the wave.
Step 2 (Examples): [1.0 Mark]
Example 1: Gamma rays ($\lambda \approx 10^{-12} \text{ m}$) are produced by transitions of nuclei, which have dimensions of the order of $10^{-14} \text{ m}$ to $10^{-15} \text{ m}$.
Example 2: Radio waves ($\lambda \approx 10^2 \text{ m}$ to $10^4 \text{ m}$) are produced by the oscillation of electrons in large-scale antenna systems, which are designed with lengths comparable to these wavelengths to ensure efficient resonance.
(b) Reasoning for Wave Propagation and Detection
Step 1 (Long-distance Radio Broadcasts): [0.75 Mark] Short-wave bands (typically in the range of $3 \text{ MHz}$ to $30 \text{ MHz}$) are used for long-distance communication because these waves undergo total internal reflection (refraction) by the ionosphere. This allows the waves to be reflected back to Earth, enabling communication beyond the line-of-sight (over the horizon).
Step 2 (Telescope Placement): [0.75 Mark]
Optical and radio waves fall within the atmospheric windows, meaning they can pass through the Earth's atmosphere without being significantly absorbed.
X-rays have very high energy and short wavelengths; they are completely absorbed by the Earth's atmosphere (specifically by the ozone layer and other gases). Therefore, X-ray detectors must be placed in space (satellites) to receive these signals before they are attenuated.
💡 EL10 Concept Insight:
Think of it like a musical instrument: a tiny whistle makes high-pitched, short-wavelength sounds, while a massive church organ makes deep, long-wavelength sounds—the size of the "source" dictates the "size" of the wave it creates. Similarly, radio waves bounce off the sky like a ball off a wall, but X-rays are so "sharp" that the atmosphere acts like a thick sponge, soaking them up before they ever reach the ground.
The given diagram exhibits the relationship between the wavelength of the electromagnetic waves and the energy of photon associated with them. The three points P, Q and R marked on the diagram may correspond respectively to :
(A) X-rays, microwaves, UV radiation
(B) X-rays, UV radiation, microwaves
(C) UV radiation, microwaves, X-rays
(D) Microwaves, UV radiation, X-rays
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
Which one of the following correctly represents the change in wave characteristics (all in vacuum) from microwaves to X-rays in electromagnetic spectrum ?
Speed Wavelength Frequency
(A) Remains same Decreases Remains same
(B) Remains same Decreases Increases
(C) Increases Increases Decreases
(D) Remains same Increases Remains same
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
X-rays are more harmful to human beings than ultraviolet radiations because X-rays -
(A) have frequency lower than that of ultraviolet radiations.
(B) have wavelength smaller than that of ultraviolet radiations.
(C) move faster than ultraviolet radiations in air.
(D) are mechanical waves but ultraviolet radiations are electro-magnetic waves.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
Assertion (A) : Out of Infrared and radio waves, the radio waves show more diffraction effect.
Reason (R) : Radio waves have greater frequency than infrared waves.
💡 View Verified Solution & Step Rubric
Question: Assertion (A) : Out of Infrared and radio waves, the radio waves show more diffraction effect. Reason (R) : Radio waves have greater frequency than infrared waves.
Step 1 (Governing Law & Given Data): [0.25 Mark]
The diffraction of a wave is inversely proportional to its frequency ($f$) and directly proportional to its wavelength ($\lambda$). The relationship between speed ($c$), frequency ($f$), and wavelength ($\lambda$) is given by:
$$c = f \lambda \implies \lambda = \frac{c}{f}$$
Diffraction is significant when the size of the obstacle/aperture is comparable to the wavelength ($\lambda$) of the wave.
Step 2 (Step-by-Step Logical Working): [0.5 Mark]
Comparing the electromagnetic spectrum: Radio waves have a much lower frequency ($f_{radio} < f_{IR}$) compared to Infrared waves.
Using the relation $\lambda \propto \frac{1}{f}$, since $f_{radio} < f_{IR}$, it follows that $\lambda_{radio} > \lambda_{IR}$.
Because diffraction effects are more pronounced for waves with longer wavelengths, radio waves exhibit a greater diffraction effect than infrared waves.
Evaluating the Reason (R): The statement "Radio waves have greater frequency than infrared waves" is false, as radio waves have lower frequencies.
Step 3 (Final Concluded Answer): [0.25 Mark]
Assertion (A) is True, but Reason (R) is False.
💡 EL10 Concept Insight: Think of diffraction like a wave trying to bend around an obstacle; long, lazy waves (like radio waves) bend around corners easily, while short, fast waves (like infrared) are too "stiff" to bend and get blocked more easily.
(a) The electric field $\vec{\text{E}}$ of an electromagnetic wave propagating in north direction is oscillating in up and down direction. Describe the direction of magnetic field $\vec{\text{B}}$ of the wave.
(b) Are the wave length of radio waves and microwaves longer or shorter than those detectable by human eyes ?
(c) Write main use of each of the following in human life :
(i) Infrared waves (ii) Gamma rays
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
(a) How is an electromagnetic wave produced?
(b) An electromagnetic wave is travelling in vertically upward direction. At an instant, its electric field vector points in west direction. In which direction does the magnetic field vector point at that instant?
(c) Estimate the ratio of shortest wave length of radio waves to the longest wave length of gamma waves.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
The electromagnetic radiation used to kill germs in water purifiers is
(A) Ultraviolet rays
(B) Infrared waves
(C) Visible rays
(D) $\gamma$-rays
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
(a) Write two characteristics of electromagnetic waves.
(b) What is meant by 'displacement current'? Explain briefly how is displacement current set up during charging of a capacitor in a circuit.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
The first scientist who produced and observed electromagnetic waves of wavelengths in the range 25 mm - 5 mm was : (A) J.C. Maxwell (B) H.R. Hertz (C) J.C. Bose (D) G. Marconi
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
Photoelectrons are emitted when a zinc plate is (A) Heated (B) hammered (C) Irradiated by ultraviolet light (D) subjected to a high pressure
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
Electromagnetic waves with wavelength $10\text{ nm}$ are called :
(A) Infrared waves
(B) Ultraviolet rays
(C) Gamma rays
(D) X-rays
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
(a) On what factors does the speed of an electromagnetic wave in a medium depend? (b) How is an electromagnetic wave produced? (c) Sketch a schematic diagram depicting the electric and magnetic fields for an electromagnetic wave propagating along z-axis.
💡 View Verified Solution & Step Rubric
CBSE Class 12 Physics: Electromagnetic Waves (Marking Scheme)
(a) Factors affecting the speed of an electromagnetic wave in a medium: [1 Mark]
The speed of an electromagnetic wave in a medium is given by the relation:
$$v = \frac{1}{\sqrt{\mu \epsilon}}$$
Where:
$\mu$ is the magnetic permeability of the medium.
$\epsilon$ is the electric permittivity of the medium.
Thus, the speed depends on the electrical and magnetic properties of the medium.
(b) Production of an electromagnetic wave: [1 Mark]
An electromagnetic wave is produced by an accelerated charge. According to Maxwell's equations, a time-varying electric field produces a time-varying magnetic field, and vice versa. When a charge oscillates or accelerates, it creates a time-varying electric field, which generates a time-varying magnetic field, resulting in the propagation of electromagnetic waves in space.
(c) Schematic diagram (Propagation along z-axis): [1 Mark]
The electric field vector $\vec{E}$ oscillates along the x-axis, and the magnetic field vector $\vec{B}$ oscillates along the y-axis, while the wave propagates along the z-axis.
(refer to circuit diagram below)
💡 EL10 Concept Insight: Think of an electromagnetic wave like a dance between electricity and magnetism; when a charge wiggles (accelerates), it creates a ripple in the electric field, which immediately forces the magnetic field to wiggle too, and this "tag-team" keeps pushing itself forward through space forever!
Welders wear special glass goggles or face masks with glass windows to protect their eyes from radiations produced by welding arcs. These radiations are:
(A) X-rays
(B) Ultraviolet rays
(C) Infrared waves
(D) Gamma rays
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
The speed of electromagnetic waves in a medium depends upon :
(A) properties of the medium
(B) frequency of the waves
(C) wavelength of the waves
(D) intensity of the waves
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
Explain the following, giving proper reason : (a) During charging of a capacitor, displacement current exists in the capacitor. But there is no displacement current when it gets fully charged. (b) The frequency of microwaves in ovens matches with the resonant frequency of water molecules. (c) Infrared waves are also known as heat waves.
💡 View Verified Solution & Step Rubric
CBSE Class 12 Physics: Marking Scheme Solution
(a) Displacement Current in a Capacitor
Step 1 (Governing Law): [0.5 Mark] The displacement current $I_d$ is defined by the Maxwell-Ampere law as:
$$I_d = \epsilon_0 \frac{d\phi_E}{dt}$$
where $\phi_E$ is the electric flux through the capacitor plates.
Step 2 (Mathematical Working): [0.5 Mark] During charging, the charge $q$ on the plates increases with time, causing the electric field $E = \frac{q}{A\epsilon_0}$ to change. Since $\phi_E = E \cdot A = \frac{q}{\epsilon_0}$, the rate of change of flux is non-zero:
$$I_d = \epsilon_0 \frac{d}{dt} \left( \frac{q}{\epsilon_0} \right) = \frac{dq}{dt}$$
When the capacitor is fully charged, $q$ becomes constant, so $\frac{dq}{dt} = 0$, leading to $I_d = 0$.
Step 3 (Final Conclusion): [0.0 Mark] Displacement current exists only when the electric flux is time-varying.
💡 EL10 Concept Insight: Think of displacement current like a "ghost" current that flows through the empty space between capacitor plates only while the electric field is still growing; once the capacitor is full, the field stops changing, and the "ghost" current vanishes.
(b) Microwave Frequency and Water Molecules
Step 1 (Governing Law): [0.5 Mark] Resonance occurs when the driving frequency of an external field matches the natural frequency of the system.
Step 2 (Reasoning): [0.5 Mark] Water molecules are polar and possess a permanent electric dipole moment. When microwaves of a specific frequency are incident, they exert a torque on these dipoles.
Step 3 (Final Conclusion): [0.0 Mark] At resonance, the energy of the microwaves is efficiently transferred to the water molecules, increasing their rotational kinetic energy, which manifests as heat.
💡 EL10 Concept Insight: It’s like pushing a child on a swing; if you push at the exact right rhythm (resonance), the swing goes higher and higher. Microwaves "push" water molecules at their natural rhythm, making them spin faster and get hot.
(c) Infrared Waves as Heat Waves
Step 1 (Governing Law): [0.5 Mark] Infrared waves have frequencies lower than visible light and are associated with the vibrational motion of atoms and molecules.
Step 2 (Reasoning): [0.5 Mark] When infrared radiation is incident on a substance, it is absorbed by the molecules, causing them to vibrate more vigorously.
Step 3 (Final Conclusion): [0.0 Mark] This increase in the internal energy of the molecules results in a rise in the temperature of the substance, hence they are termed "heat waves."
💡 EL10 Concept Insight: Infrared waves are like invisible "wiggling" energy; when they hit an object, they make the molecules inside it wiggle faster, and in physics, "faster wiggling" is just another word for "getting hotter."
Which one of the following has the highest frequency ?
(A) Infrared rays
(B) Gamma rays
(C) Radio waves
(D) Microwaves
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
Electromagnetic waves with frequency $1.0 \times 10^{18}$ Hz are known as :
(A) Infrared rays
(B) Ultraviolet rays
(C) X-rays
(D) Gamma rays
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
Name the electromagnetic waves with their wavelength range which are used for (i) FM radio broadcast (ii) detection of fracture in bones (iii) treatment of muscular strain
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
Explain the following giving reasons : (i) ‘Electromagnetic waves differ considerably in their mode of interaction with matter’. (ii) ‘Food items to be heated in microwave oven must contain water’. (iii) ‘Welders wear face mask with glasses during welding’.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
The electromagnetic waves used to purify water are
(A) Infrared rays
(B) Ultraviolet rays
(C) X-rays
(D) Gamma rays
💡 View Verified Solution & Step Rubric
Question: The electromagnetic waves used to purify water are
Step 1 (Identification of Electromagnetic Spectrum Properties): [0.5 Mark]
According to the NCERT Physics textbook (Chapter: Electromagnetic Waves), different regions of the electromagnetic spectrum are characterized by their specific frequency ranges and applications. Ultraviolet (UV) radiation, which lies in the frequency range of approximately $8 \times 10^{14} \text{ Hz}$ to $5 \times 10^{16} \text{ Hz}$, possesses sufficient energy to damage the DNA of microorganisms.
Step 2 (Application Analysis): [0.25 Mark]
The germicidal property of electromagnetic waves is directly proportional to their photon energy, given by the relation:
UV rays have a shorter wavelength and higher frequency than visible light, allowing them to penetrate the cell walls of bacteria and viruses, effectively neutralizing them without the use of chemicals.
Step 3 (Final Concluded Answer): [0.25 Mark]
Comparing the given options, Ultraviolet rays are the standard electromagnetic waves used in water purifiers for sterilization. Therefore, the correct option is (B).
💡 EL10 Concept Insight: Think of Ultraviolet rays like tiny, invisible "energy bullets" that are just the right size to break the genetic code of germs, making it impossible for them to reproduce and keep you sick!
(a) Name the parts of the electromagnetic spectrum which are (i) also known as 'heat waves' and (ii) absorbed by ozone layer in the atmosphere.
(b) Write briefly one method each, of the production and detection of these radiations.
💡 View Verified Solution & Step Rubric
(a) Identification of Electromagnetic Spectrum Parts:
(i) Heat Waves: Infrared rays. [0.5 Mark]
(ii) Absorbed by Ozone Layer: Ultraviolet (UV) rays. [0.5 Mark]
(b) Production and Detection Methods:
Step 1 (Infrared Rays): [1.0 Mark]
Production: Produced by hot bodies and molecules. When atoms and molecules undergo vibrational and rotational transitions, they emit infrared radiation.
Detection: Detected by thermopiles, bolometers, or infrared photographic film.
Step 2 (Ultraviolet Rays): [1.0 Mark]
Production: Produced by special lamps (e.g., mercury vapor lamps) and very hot bodies like the Sun. They are generated by transitions of electrons in atoms.
Detection: Detected by photocells, photographic film, and fluorescent materials (which absorb UV and emit visible light).
💡 EL10 Concept Insight:
Think of Infrared as the "wiggle" energy—when atoms vibrate faster, they release heat we can feel. Ultraviolet is "high-frequency" energy—it's so powerful that it can break chemical bonds, which is why the ozone layer acts like a shield to stop it from damaging our skin.
Name the part of the electromagnetic spectrum which are
(i) stopped by face mask worn by welders.
(ii) used in detectors in Earth satellites.
(iii) used in ‘short-wave band’ in communication.
Also write the order of wavelengths, in each case.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
The frequencies of ultraviolet rays, gamma-rays and microwaves are $\nu_1$, $\nu_2$ and $\nu_3$ respectively. Then :
(A) $\nu_1 = \nu_2 = \nu_3$
(B) $\nu_1 > \nu_2 > \nu_3$
(C) $\nu_2 > \nu_1 > \nu_3$
(D) $\nu_3 > \nu_2 > \nu_1$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
What is meant by ‘displacement current’ ? Show that during charging of a capacitor, displacement current is equal to conduction current in the circuit.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
Identify the part of the electromagnetic spectrum which:
a) produces heating effect,
b) is absorbed by the ozone layer in the atmosphere,
c) is used for studying crystal structure.
Write any one method of the production of each of the above radiations.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
(a) What is meant by displacement current ? Explain. Give an example where such current exists.\nOR\n(b) Write the wavelength range of infrared waves. Why are these waves often called 'heat waves' ? Explain.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
Which of the following physical quantities remain the same for X-ray, red light and radio waves when travelling through a medium ?
(a) Wavelength
(b) Speed
(c) Frequency
(d) Momentum
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
Which of the following radiations has the highest frequency ? (a) Visible light (b) Infrared rays (c) Microwaves (d) X-rays
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
(a) Identify the part of electromagnetic spectrum which is :
(i) suitable for radar systems.
(ii) sometimes referred to as ‘heat waves’.
Write their wavelength range.
OR
(b) Write two characteristics of electromagnetic waves.
Name the radiation used to kill germs in water purifiers.
Write the range of their frequency.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
(a) (i) Depict a plane electromagnetic wave propagating along the x-axis. Write the expressions for its oscillating electric and magnetic fields. (ii) Write three characteristics of electromagnetic waves. OR (b) Name the electromagnetic waves which are produced by the following : (i) Radioactive decays of nucleus (ii) Welding arcs (iii) Hot bodies Write one use each of these waves.
💡 View Verified Solution & Step Rubric
Solution for CBSE Class 12 Physics: Electromagnetic Waves
Part (a)
(i) Representation and Expressions:
Step 1 (Conceptual Representation): [0.5 Mark]
The electric field vector $\vec{E}$ oscillates along the y-axis and the magnetic field vector $\vec{B}$ oscillates along the z-axis for a wave propagating along the x-axis.
Step 2 (Mathematical Expressions): [0.5 Mark]
The expressions for the oscillating fields are:
$$E_y = E_0 \sin(kx - \omega t)$$
$$B_z = B_0 \sin(kx - \omega t)$$
Where $E_0$ and $B_0$ are the amplitudes of the electric and magnetic fields respectively.
(ii) Characteristics of EM Waves: [0.5 Mark]
EM waves are transverse in nature.
They do not require any material medium for propagation.
They travel in free space with the speed of light, $c = \frac{1}{\sqrt{\mu_0 \epsilon_0}} \approx 3 \times 10^8 \text{ m/s}$.
Part (b)
Identification and Uses: [0.5 Mark]
Source
Electromagnetic Wave
Use
(i) Radioactive decay
Gamma rays ($\gamma$-rays)
Used in radiotherapy to treat cancer cells.
(ii) Welding arcs
Ultraviolet (UV) rays
Used in water purifiers to kill germs/bacteria.
(iii) Hot bodies
Infrared (IR) rays
Used in remote switches or night vision goggles.
💡 EL10 Concept Insight:
Think of an electromagnetic wave like a synchronized dance between electricity and magnetism: as the electric field wiggles up and down, it creates a magnetic field that wiggles side to side, and this "tag-team" allows the energy to zip through empty space at the fastest speed possible in the universe!
Electromagnetic waves with wavelength
(i) $\lambda_1$ is suitable for radar systems used in aircraft navigation.
(ii) $\lambda_2$ is used to kill germs in water purifiers.
(iii) $\lambda_3$ is used to improve visibility in runways during fog and mist conditions.
Identify and name the part of the electromagnetic spectrum to which these radiations belong. Also arrange these wavelengths in ascending order of their magnitude.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
(i) Arrange the following electromagnetic radiation in the ascending order of their frequencies : X-rays, microwaves, gamma rays, radio waves. (ii) Write two uses of any two of these radiation.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
(ii) The experimental demonstration of electromagnetic waves is possible only in the low frequency region (the radio wave region). Explain.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
(b) (i) Draw a diagram showing a linearly polarized electromagnetic wave, propagating in the z-direction depicting $\vec{E}$ and $\vec{B}$.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
(ii) The wavelength of an electromagnetic wave is $10^{-10}\text{ m}$. Identify the wave and mention its one use.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
(a) (i) Long distance radio broadcasts use short-wave bands. Why? (ii) The experimental demonstration of electromagnetic waves is possible only in the low frequency region (the radio wave region). Explain. OR (b) (i) Draw a diagram showing a linearly polarized electromagnetic wave, propagating in the z-direction depicting $\vec{E}$ and $\vec{B}$. (ii) The wavelength of an electromagnetic wave is $10^{-10}$ m. Identify the wave and mention its one use.
💡 View Verified Solution & Step Rubric
Solution (a)
(i) Long distance radio broadcasts use short-wave bands. Why?
Step 1 (Governing Principle): [0.5 Mark]
Short-wave bands (typically in the frequency range of a few MHz to 30 MHz) are used because they undergo ionospheric reflection (sky wave propagation). These waves are reflected back to the Earth by the ionosphere, allowing them to travel over long distances beyond the horizon.
(ii) The experimental demonstration of electromagnetic waves is possible only in the low frequency region. Explain.
Step 2 (Reasoning): [0.5 Mark]
The experimental generation of electromagnetic waves requires an oscillating circuit (LC circuit). As the frequency increases, the required values of $L$ and $C$ become extremely small, making it physically difficult to construct such circuits. Furthermore, the radiation efficiency of an antenna depends on its size being comparable to the wavelength ($\lambda$). For high-frequency waves, the wavelength is very small, making the construction of a suitable antenna practically impossible in a laboratory setting.
Solution (b)
(i) Draw a diagram showing a linearly polarized electromagnetic wave, propagating in the z-direction.
Step 1 (Diagrammatic Representation): [0.5 Mark]
The wave propagates along the $z$-axis. The electric field vector $\vec{E}$ oscillates along the $x$-axis, and the magnetic field vector $\vec{B}$ oscillates along the $y$-axis. They are mutually perpendicular and in phase.
(refer to circuit diagram below)
(ii) The wavelength of an electromagnetic wave is $10^{-10}$ m. Identify the wave and mention its one use.
Step 2 (Identification): [0.25 Mark]
Given $\lambda = 10^{-10} \text{ m}$. This wavelength falls in the range of X-rays.
Step 3 (Application): [0.25 Mark]
One use of X-rays is in medical diagnostics (e.g., detecting fractures in bones or imaging internal organs).
💡 EL10 Concept Insight:
Think of the ionosphere like a giant mirror in the sky for radio waves; short-wave signals bounce off this "mirror" to reach far-away places. For X-rays, they have such tiny wavelengths that they can pass right through soft tissues, which is exactly why doctors use them to "see" inside your body without surgery!
A hydrogen atom has only one electron yet its spectrum has many lines. Explain. Name the spectral series which lies in the visible region of electromagnetic spectrum. Mention the conditions under which the spectral line in this series will have (a) maximum, and (b) minimum wavelengths.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
(a) Name the electromagnetic waves which are
(i) produced during decay of a nucleus,
(ii) also known as heat waves,
(iii) absorbed by ozone layer in the atmosphere.
Write one use each of these electromagnetic waves.
OR
(b) [The question text for the OR part is not explicitly provided on this page, only the OR label exists for the question number 11]
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.