Part (a) (i): Change in Electrostatic Energy
Step 1 (Formula & Given Data): [0.5 Mark]
The change in electrostatic potential energy ($\Delta U$) of a system of charges in an external electric field is given by the sum of the potential energy of each charge in the external field: $\Delta U = q_1 V(r_1) + q_2 V(r_2)$.
Given: $q_1 = 5 \times 10^{-6} \text{ C}$ at $r_1 = 0.03 \text{ m}$, $q_2 = -1 \times 10^{-6} \text{ C}$ at $r_2 = 0.03 \text{ m}$.
The potential $V(r)$ due to the field $\vec{E} = \frac{A}{r^2} \hat{r}$ is $V(r) = -\int \vec{E} \cdot d\vec{r} = \frac{A}{r}$.
Step 2 (Mathematical Working): [1.0 Mark]
Calculate potential at both positions:
$$V(r_1) = \frac{3 \times 10^5}{0.03} = 10^7 \text{ V}$$
$$V(r_2) = \frac{3 \times 10^5}{0.03} = 10^7 \text{ V}$$
Calculate $\Delta U$:
$$\Delta U = (q_1 + q_2) \times V = (5 \times 10^{-6} - 1 \times 10^{-6}) \times 10^7$$
$$\Delta U = 4 \times 10^{-6} \times 10^7$$
Step 3 (Final Answer): [0.5 Mark]
$\Delta U = 40 \text{ J}$
Part (a) (ii): Capacitance and Dielectrics
Step 1 (Formula & Given Data): [0.5 Mark]
Capacitance is defined as $C = \frac{Q}{V}$. Given $Q = 80 \times 10^{-6} \text{ C}$ and $V = 16 \text{ V}$.
Step 2 (Mathematical Working): [1.0 Mark]
(1) $C = \frac{80 \times 10^{-6}}{16} = 5 \times 10^{-6} \text{ F} = 5 \mu\text{F}$.
(2) When a dielectric of constant $K=3$ is introduced, new capacitance $C' = K \cdot C = 3 \times 5 \mu\text{F} = 15 \mu\text{F}$.
New potential difference $V' = \frac{Q}{C'} = \frac{80 \times 10^{-6}}{15 \times 10^{-6}} = \frac{80}{15} \text{ V}$.
Step 3 (Final Answer): [1.5 Marks]
- (1) $C = 5 \mu\text{F}$
- (2) $V' = 5.33 \text{ V}$
- (3) No, the capacitance will not change. Reason: Capacitance
CBSE Class 12 2025 • Q94
• 1 Mark
In the figure curved lines represent equipotential surfaces. A charge Q is moved along different paths A, B, C and D. The work done on the charge will be maximum along the path
(A) A
(B) B
(C) C
(D) D
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2025 • Q95
• 3 Marks
(a) A parallel plate capacitor is charged by an ac source. Show that the sum of conduction current ($I_c$) and the displacement current ($I_d$) has the same value at all points of the circuit. (b) In case (a) above, is Kirchhoff's first rule (junction rule) valid at each plate of the capacitor ? Explain.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2025 • Q96
• 5 Marks
(a) (i) Two point charges 5 $\mu$C and -1 $\mu$C are placed at points (-3 cm, 0, 0) and (3 cm, 0, 0) respectively. An external electric field $\vec{E} = \frac{A}{r^2} \hat{r}$ where A = 3 $\times$ $10^5$ Vm is switched on in the region. Calculate the change in electrostatic energy of the system due to the electric field. (ii) A system of two conductors is placed in air and they have net charge of +80$\mu$C and -80$\mu$C which causes a potential difference of 16 V between them. (1) Find the capacitance of the system. (2) If the air between the capacitor is replaced by a dielectric medium of dielectric constant 3, what will be the potential difference between the two conductors ? (3) If the charges on two conductors are changed to +160 $\mu$C and -160 $\mu$C, will the capacitance of the system change ? Give reason for your answer.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2025 • Q97
• 1 Mark
Two conductors A and B of the same material have their lengths in the ratio 1:2 and radii in the ratio 2:3. If they are connected in parallel across a battery, the ratio $\frac{v_A}{v_B}$ of the drift velocities of electrons in them will be -
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2025 • Q98
• 2 Marks
n identical cells, each of e.m.f. E and internal resistance r, are connected in series. Later on it was found out that two cells 'X' and 'Y' are connected in reverse polarities. Calculate the potential difference across the cell 'X'.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2025 • Q99
• 5 Marks
(a) (i) Two point charges $5\text{ }\mu\text{C}$ and $-1\text{ }\mu\text{C}$ are placed at points $(-3\text{ cm}, 0, 0)$ and $(3\text{ cm}, 0, 0)$ respectively. An external electric field $\vec{E} = \frac{A}{r^2}\hat{r}$ where $A = 3 \times 10^5\text{ Vm}$ is switched on in the region. Calculate the change in electrostatic energy of the system due to the electric field.
(ii) A system of two conductors is placed in air and they have net charge of $+80\text{ }\mu\text{C}$ and $-80\text{ }\mu\text{C}$ which causes a potential difference of $16\text{ V}$ between them.
(1) Find the capacitance of the system.
(2) If the air between the capacitor is replaced by a dielectric medium of dielectric constant $3$, what will be the potential difference between the two conductors ?
(3) If the charges on two conductors are changed to $+160\text{ }\mu\text{C}$ and $-160\text{ }\mu\text{C}$, will the capacitance of the system change ? Give reason for your answer.
OR
(b) (i) Consider three metal spherical shells A, B and C, each of radius $R$. Each shell is having a concentric metal ball of radius $R/10$. The spherical shells A, B and C are given charges $+6q$, $-4q$, and $14q$ respectively. Their inner metal balls are also given charges $-2q$, $+8q$ and $-10q$ respectively. Compare the magnitude of the electric fields due to shells A, B and C at a distance $3R$ from their centres.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2025 • Q100
• 2 Marks
(a) Two wires of the same material and the same radius have their lengths in the ratio $2 : 3$. They are connected in parallel to a battery which supplies a current of $15 \text{ A}$. Find the current through the wires. OR (b) In the circuit three ideal cells of e.m.f. $V, V$ and $2V$ are connected to a resistor of resistance $R$, a capacitor of capacitance $C$ and another resistor of resistance $2R$ as shown in figure. In the steady state find (i) the potential difference between $P$ and $Q$ and (ii) potential difference across capacitor $C$.
💡 View Verified Solution & Step Rubric
Solution for Part (a)
Step 1 (Formula / Governing Law & Given Data): [0.5 Mark]
The resistance of a wire is given by $R = \rho \frac{l}{A}$. Since the material ($\rho$) and radius ($A$) are the same, the resistance is directly proportional to length ($R \propto l$).
Given: $l_1 : l_2 = 2 : 3 \implies R_1 : R_2 = 2 : 3$. Let $R_1 = 2x$ and $R_2 = 3x$.
Step 2 (Step-by-Step Mathematical Working): [1.0 Mark]
In a parallel connection, the potential difference ($V$) across both wires is the same. According to Ohm's Law ($V = IR$), the current is inversely proportional to resistance ($I \propto \frac{1}{R}$):
$$ \frac{I_1}{I_2} = \frac{R_2}{R_1} = \frac{3}{2} $$
Given total current $I = I_1 + I_2 = 15 \text{ A}$. Using the ratio method:
$$ I_1 = \left( \frac{3}{3+2} \right) \times 15 = \frac{3}{5} \times 15 = 9 \text{ A} $$
$$ I_2 = \left( \frac{2}{3+2} \right) \times 15 = \frac{2}{5} \times 15 = 6 \text{ A} $$
Step 3 (Final Concluded Answer): [0.5 Mark]
The current through the first wire is $9 \text{ A}$ and the current through the second wire is $6 \text{ A}$.
💡 EL10 Concept Insight
Think of electricity like water flowing through pipes: if two pipes have the same width but one is longer, the longer one is harder to push water through. Because the current has to choose between the two paths, it naturally prefers the "easier" path (the shorter wire) and sends more current that way!
CBSE Class 12 2025 • Q101
• 4 Marks
Question numbers 29 and 30 are case study based questions. Read the following paragraphs and answer the questions that follow.
A parallel plate capacitor has two parallel plates which are separated by an insulating medium like air, mica, etc. When the plates are connected to the terminals of a battery, they get equal and opposite charges and an electric field is set up in between them. This electric field between the two plates depends upon the potential difference applied, the separation of the plates and nature of the medium between the plates.
(i) The electric field between the plates of a parallel plate capacitor is $E$. Now the separation between the plates is doubled and simultaneously the applied potential difference between the plates is reduced to half of its initial value. The new value of the electric field between the plates will be :
(A) $E$
(B) $2E$
(C) $\frac{E}{4}$
(D) $\frac{E}{2}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2025 • Q102
• 1 Mark
A material of dielectric constant $K$ is filled in a parallel plate capacitor of capacitance $C$. The new value of its capacitance becomes
(A) $C$
(B) $\frac{C}{K}$
(C) $CK$
(D) $C\left$1 + \frac{1}{K}\right$$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2025 • Q103
• 2 Marks
A parallel plate capacitor has two parallel plates which are separated by an insulating medium like air, mica, etc. When the plates are connected to the terminals of a battery, they get equal and opposite charges and an electric field is set up in between them. This electric field between the two plates depends upon the potential difference applied, the separation of the plates and nature of the medium between the plates.
💡 View Verified Solution & Step Rubric
Question Analysis: The question describes the fundamental physics of a parallel plate capacitor. To derive the relationship between the electric field ($E$), potential difference ($V$), and plate separation ($d$), we use the standard electrostatic relations.
Step 1 (Formula / Governing Law & Given Data): [0.5 Mark]
The electric field $E$ between the plates of a parallel plate capacitor is related to the potential difference $V$ applied across the plates and the separation distance $d$ between them by the following relation:
$$E = \frac{V}{d}$$
Where:
- $E$ = Electric field intensity (measured in $\text{V/m}$ or $\text{N/C}$)
- $V$ = Potential difference between the plates (measured in $\text{Volts}$)
- $d$ = Separation distance between the plates (measured in $\text{meters}$)
Step 2 (Step-by-Step Mathematical Working): [1.0 Mark]
For a parallel plate capacitor with surface charge density $\sigma$, the electric field produced by one plate is $\frac{\sigma}{2\epsilon_0}$. Since there are two plates with equal and opposite charges, the fields add up in the region between them:
$$E = \frac{\sigma}{2\epsilon_0} + \frac{\sigma}{2\epsilon_0} = \frac{\sigma}{\epsilon_0}$$
Substituting $\sigma = \frac{Q}{A}$ (where $Q$ is charge and $A$ is area) and using the relation $V = Ed$, we express the field in terms of the potential difference:
$$V = E \cdot d \implies E = \frac{V}{d}$$
If a dielectric medium with dielectric constant $K$ is present, the field is modified as:
$$E_{medium} = \frac{V}{d \cdot K}$$
Step 3 (Final Concluded Answer): [0.5 Mark]
The electric field $E$ between the plates is directly proportional to the potential difference $V$ and inversely proportional to the separation $d$ between the plates. In the presence of a medium with dielectric constant $K$, the field is reduced by a factor of $K$:
$$E = \frac{V}{d} \text{ (for air/vacuum)} \quad \text{or} \quad E = \frac{V}{K \cdot d} \text{ (for a medium)}$$
The S.I. unit of the electric field is $\text{Volt/meter (V/m)}$.
💡 EL10 Concept Insight: Think of the electric field like a slope on a hill; the potential difference is the total height of the hill, and the separation distance is the length of the path. If you keep the height the same but make the path shorter, the slope (electric field) gets much steeper!
CBSE Class 12 2025 • Q104
• 2 Marks
The electric field between the plates of a parallel plate capacitor is E. Now the separation between the plates is doubled and simultaneously the applied potential difference between the plates is reduced to half of its initial value. The new value of the electric field between the plates will be:
(A) E
(B) 2E
(C) $\frac{\text{E}}{4}$
(D) $\frac{\text{E}}{2}$
💡 View Verified Solution & Step Rubric
Correct Option: (C) $\frac{E}{4}$
Step 1 (Formula / Governing Law & Given Data): [0.5 Mark]
The electric field $E$ between the plates of a parallel plate capacitor is related to the potential difference $V$ and the separation distance $d$ between the plates by the formula:
$$E = \frac{V}{d}$$
Initial state: $E_1 = \frac{V}{d}$
Step 2 (Step-by-Step Mathematical Working): [1.0 Mark]
According to the problem, the new parameters are:
- New separation distance: $d' = 2d$
- New potential difference: $V' = \frac{V}{2}$
Substituting these values into the formula for the new electric field $E'$:
$$E' = \frac{V'}{d'}$$
$$E' = \frac{\frac{V}{2}}{2d}$$
$$E' = \frac{V}{2 \times 2d}$$
$$E' = \frac{V}{4d}$$
Step 3 (Final Concluded Answer): [0.5 Mark]
Since $E = \frac{V}{d}$, we can substitute this back into the equation:
$$E' = \frac{1}{4} \left( \frac{V}{d} \right) = \frac{E}{4}$$
Thus, the new electric field is $\frac{E}{4}$.
💡 EL10 Concept Insight:
Think of the electric field as the "steepness" of a slope; if you make the hill twice as long (doubling distance) but only half as tall (halving voltage), the slope becomes four times flatter!
CBSE Class 12 2025 • Q105
• 4 Marks
Question Numbers 29 and 30 are Case-Study based questions. Read the following paragraphs and answer the questions that follow :
A power supply is connected across the two plates of a capacitor. Consequently, one plate becomes positively charged and the other plate becomes negatively charged. Thus a uniform electric field is established between the two plates. If a charged particle is released between these two plates, it experiences a force. The potential difference between the plates affects its charge and the energy stored in the capacitor.
(i) A proton and an electron are released from rest in the space between the two plates of a charged capacitor. Assume that the proton and the electron do not interact with each other. The acceleration of the proton compared with that of the electron is
(A) same in both magnitude and direction.
(B) same in magnitude but in opposite direction.
(C) greater in magnitude and opposite in direction.
(D) lesser in magnitude but in opposite direction.
(ii) An electron is released between the two parallel plates of a charged capacitor. Which of the following statements is incorrect ?
(A) The electric field between the plates is directed from the positively charged plate to the negatively charged plate.
(B) The magnitude of electric field is the same at all points between the plates.
(C) The acceleration of the electrons will be constant between the plates.
(D) The potential increases in the direction of the electric field between the plates.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2025 • Q106
• 1 Mark
(iii) The potential difference between the two plates of a capacitor is V. An electron of mass m and charge -e is released from rest near the negative plate. The maximum speed gained by the electron is
(A) 2eVm
(B) $\sqrt{\frac{em}{2V}}$
(C) $\sqrt{\frac{2eV}{m}}$
(D) $\sqrt{\frac{2me}{V}}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2025 • Q107
• 1 Mark
(a) The electric field between two parallel plates of a charged capacitor is $200\text{ V/m}$. The plates are $5\text{ mm}$ apart. The potential difference between the two plates is
(A) $20\text{ V}$
(B) $10\text{ V}$
(C) $5.0\text{ V}$
(D) $1.0\text{ V}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2025 • Q108
• 5 Marks
(b) (A) Differentiate between the electrostatic force and the gravitational force between two charged particles.
(B) A potential difference of 480 V is applied between two large horizontal plates, kept one above the other, 3.0 cm apart. A charged particle of mass 4 × 10^{-11} kg, when released at rest between the plates, remains stationary in the region. If the upper plate is at positive potential, find
(i) nature of the charge on the particle
(ii) the magnitude of the charge on the particle.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2024 • Q109
• 2 Marks
Two batteries of emfs $6\text{ V}$ and $3\text{ V}$ and internal resistances $0.8\text{ }\Omega$ and $0.2\text{ }\Omega$ respectively are connected in series to an external resistance $R$, as shown in figure. Find the value of $R$ so that the potential difference across the $6\text{ V}$ battery be zero.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2024 • Q110
• 5 Marks
(a) (i) A resistor and a capacitor are connected in series to an ac source $v = v_m \sin \omega t$. Derive an expression for the impedance of the circuit.
(ii) When does an inductor act as a conductor in a circuit ? Give reason for it.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2024 • Q111
• 1 Mark
Two charged particles, P and Q, each having charge $q$ but of masses $m_1$ and $m_2$, are accelerated through the same potential difference $V$. They enter a region of magnetic field $\vec{B}$ $$\perp \vec{v}$$ and describe the circular paths of radii $a$ and $b$ respectively. Then $(\frac{m_1}{m_2})$ is equal to : (A) $\frac{a}{b}$ (B) $\frac{b}{a}$ (C) $(\frac{a}{b})^2$ (D) $(\frac{b}{a})^2$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2024 • Q112
• 3 Marks
An air-filled parallel plate capacitor with plate separation $1\text{ mm}$ has a capacitance of $20\text{ pF}$. It is charged to $4.0\text{ }\mu\text{C}$. Calculate the amount of work done to pull its plates to a separation of $5\text{ mm}$. Assume the charge on the plates remains the same.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2024 • Q113
• 1 Mark
A capacitor consists of two parallel plates, with an area of cross-section of $0.001 \text{ m}^2$, separated by a distance of $0.0001 \text{ m}$. If the voltage across the plates varies at the rate of $10^8 \text{ V/s}$, then the value of displacement current through the capacitor is (A) $8.85 \times 10^{-3} \text{ A}$ (B) $8.85 \times 10^{-4} \text{ A}$ (C) $7.85 \times 10^{-3} \text{ A}$ (D) $9.85 \times 10^{-3} \text{ A}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2024 • Q114
• 1 Mark
In a series LCR circuit, the voltage across the resistance, capacitance and inductance is $10 \text{ V}$ each. If the capacitance is short circuited the voltage across the inductance will be (A) $10 \text{ V}$ (B) $10\sqrt{2} \text{ V}$ (C) $10/\sqrt{2} \text{ V}$ (D) $20 \text{ V}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2024 • Q115
• 3 Marks
Find the expression for the capacitance of a parallel plate capacitor of plate area A and plate separation d when (I) a dielectric slab of thickness t and (II) a metallic slab of thickness t, where ($t < d$) are introduced one by one between the plates of the capacitor. In which case would the capacitance be more and why?
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2024 • Q116
• 1 Mark
Electrons drift with speed $v_d$ in a conductor with potential difference $V$ across its ends. If $V$ is reduced to $\left$ \frac{V}{2} \right$$, their drift speed will become :
(A) $\frac{v_d}{2}$
(B) $v_d$
(C) $2 v_d$
(D) $4 v_d$
💡 View Verified Solution & Step Rubric
Correct Option: (A) $\frac{v_d}{2}$
Step 1 (Formula / Governing Law & Given Data): [0.5 Mark]
The drift velocity ($v_d$) of electrons in a conductor is related to the potential difference ($V$) across its ends by the expression:
$$v_d = \frac{eE\tau}{m} = \frac{e(V/l)\tau}{m}$$
Where:
- $e$ = charge of an electron
- $V$ = potential difference
- $l$ = length of the conductor
- $\tau$ = relaxation time
- $m$ = mass of the electron
From the above relation, it is evident that $v_d \propto V$ (assuming temperature and relaxation time remain constant).
Step 2 (Step-by-Step Mathematical Working): [0.25 Mark]
Let the initial drift speed be $v_{d1} = v_d$ at potential $V_1 = V$.
Let the new drift speed be $v_{d2}$ at potential $V_2 = \frac{V}{2}$.
Using the proportionality $v_d \propto V$:
$$\frac{v_{d2}}{v_{d1}} = \frac{V_2}{V_1}$$
$$\frac{v_{d2}}{v_d} = \frac{V/2}{V}$$
$$\frac{v_{d2}}{v_d} = \frac{1}{2}$$
Step 3 (Final Concluded Answer): [0.25 Mark]
Solving for $v_{d2}$:
$$v_{d2} = \frac{v_d}{2}$$
Thus, the drift speed becomes $\frac{v_d}{2}$.
💡 EL10 Concept Insight: Think of the potential difference as the "push" or pressure moving the electrons; if you cut that push in half, the electrons will naturally move at half the speed.
CBSE Class 12 2024 • Q117
• 4 Marks
Choose the incorrect statement :
(A) The potential difference (V) between the two terminals of a cell in a closed circuit is always less than its emf ($\varepsilon$), during discharge of the cell.
(B) The internal resistance of a cell decreases with the decrease in temperature of the electrolyte.
(C) When current is drawn from the cell then V = $\varepsilon$ - Ir.
(D) The graph between potential difference between the two terminals of the cell (V) and the current (I) through it is a straight line with a negative slope.
💡 View Verified Solution & Step Rubric
Correct Option: (B)
Step 1 (Governing Principles & Definitions): [1 Mark]
- The terminal potential difference $V$ of a cell during discharge is given by the relation:
$$V = \varepsilon - Ir$$
where $\varepsilon$ is the emf, $I$ is the current, and $r$ is the internal resistance.
- The internal resistance $r$ of a cell arises due to the opposition offered by the electrolyte to the flow of ions. As temperature decreases, the viscosity of the electrolyte increases, hindering ion mobility.
Step 2 (Analysis of Statements): [2 Marks]
- Statement (A) & (C): During discharge, the cell acts as a source. The potential drop across internal resistance is $Ir$, thus $V = \varepsilon - Ir$. Since $Ir > 0$, $V < \varepsilon$. These are correct.
- Statement (D): Rearranging $V = \varepsilon - Ir$ into the linear form $y = mx + c$:
$$V = (-r)I + \varepsilon$$
This represents a straight line with a negative slope ($-r$) and a y-intercept ($\varepsilon$). This is correct.
- Statement (B): The internal resistance $r$ is inversely proportional to the mobility of ions. When the temperature of the electrolyte decreases, the viscosity increases, which reduces the mobility of ions. Consequently, the internal resistance $r$ increases, not decreases. Therefore, this statement is incorrect.
Step 3 (Final Conclusion): [1 Mark]
Since statement (B) contradicts the physical behavior of electrolytes where lower temperatures lead to higher viscosity and higher internal resistance, it is the incorrect statement.
💡 EL10 Concept Insight: Think of the electrolyte like honey; when it gets cold, it becomes thick and sticky, making it much harder for the "charge-carrying" ions to swim through it, which is why the internal resistance actually goes up when it's cold!
CBSE Class 12 2024 • Q118
• 1 Mark
OR
Potential difference across a cell in the open circuit is $6\text{ V}$. It becomes $4\text{ V}$ when a current of $2\text{ A}$ is drawn from it. The internal resistance of the cell is :
(A) $1.0\text{ }\Omega$
(B) $1.5\text{ }\Omega$
(C) $2.0\text{ }\Omega$
(D) $2.5\text{ }\Omega$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2024 • Q119
• 4 Marks
Potential difference across a cell in the open circuit is 6 V. It becomes 4 V when a current of 2 A is drawn from it. The internal resistance of the cell is :
(A) 1.0 $\Omega$
(B) 1.5 $\Omega$
(C) 2.0 $\Omega$
(D) 2.5 $\Omega$
💡 View Verified Solution & Step Rubric
Correct Option: (A) 1.0 $\Omega$
Step 1 (Formula / Governing Law & Given Data): [1 Mark]
The potential difference $V$ across a cell when a current $I$ is drawn from it is given by the relation:
$$V = E - Ir$$
Where:
- $E$ = Electromotive force (EMF) of the cell = $6\text{ V}$ (Potential difference in open circuit)
- $V$ = Terminal potential difference = $4\text{ V}$
- $I$ = Current drawn from the cell = $2\text{ A}$
- $r$ = Internal resistance of the cell
Step 2 (Step-by-Step Mathematical Working): [2 Marks]
Rearranging the formula to solve for internal resistance $r$:
$$Ir = E - V$$
$$r = \frac{E - V}{I}$$
Substituting the given values into the equation:
$$r = \frac{6\text{ V} - 4\text{ V}}{2\text{ A}}$$
$$r = \frac{2\text{ V}}{2\text{ A}}$$
$$r = 1.0\text{ }\Omega$$
Step 3 (Final Concluded Answer): [1 Mark]
The internal resistance of the cell is $1.0\text{ }\Omega$. Therefore, the correct option is (A).
💡 EL10 Concept Insight: Think of the internal resistance as a "hidden" resistor inside the battery that steals some voltage whenever electricity flows; because the voltage dropped from $6\text{V}$ to $4\text{V}$ when $2\text{A}$ flowed, that "stolen" $2\text{V}$ divided by the $2\text{A}$ current tells us the internal resistance is exactly $1\text{ ohm}$.
CBSE Class 12 2024 • Q120
When the terminals of a cell are connected to a conductor of resistance R, an electric current flows through the circuit. The electrolyte of the cell also offers some resistance in the path of the current, like the conductor. This resistance offered by the electrolyte is called internal resistance of the cell (r). It depends upon the nature of the electrolyte, the area of the electrodes immersed in the electrolyte and the temperature. Due to internal resistance, a part of the energy supplied by the cell is wasted in the form of heat.
When no current is drawn from the cell, the potential difference between the two electrodes in known as emf of the cell ($\varepsilon$). With a current drawn from the cell, the potential difference between the two electrodes is termed as terminal potential difference (V).
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2024 • Q121
• 1 Mark
Potential difference across a cell in the open circuit is $6\text{ V}$. It becomes $4\text{ V}$ when a current of $2\text{ A}$ is drawn from it. The internal resistance of the cell is : (A) $1.0\text{ }\Omega$ (B) $1.5\text{ }\Omega$ (C) $2.0\text{ }\Omega$ (D) $2.5\text{ }\Omega$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2024 • Q122
• 1 Mark
Three points charges $+q$, $-4q$ and $+2q$ are kept at the vertices of an equilateral triangle of side 'a'. The electrostatic potential energy of this system of charges is :
(A) $-\frac{1}{4\pi \varepsilon_0} \left$ \frac{q^2}{a^2} \right$$
(B) $+\frac{1}{4\pi \varepsilon_0} \left$ \frac{8q^2}{a^2} \right$$
(C) $+\frac{1}{4\pi \varepsilon_0} \left$ \frac{6q^2}{a} \right$$
(D) $-\frac{1}{4\pi \varepsilon_0} \left$ \frac{10q^2}{a} \right$$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2024 • Q123
• 1 Mark
The ratio of the de Broglie wavelengths associated with an electron of mass m and of proton of mass M when both are accelerated through a potential difference V is :
(A) $\left$ \frac{M}{m} \right$^{3/2}$
(B) $\frac{m}{M}$
(C) $\sqrt{\frac{M}{m}}$
(D) $\sqrt{\frac{m}{M}}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2024 • Q124
• 1 Mark
Assertion (A) : At a very high frequency, a capacitor can behave as a conductor. Reason (R) : The capacitance of a capacitor depends only on its geometrical configuration and nature of dielectric used.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2024 • Q125
• 3 Marks
(a) Define mobility of free electrons in a conductor. How does the mobility of electrons in a metal change when :
(i) temperature of the conductor is decreased at constant potential difference ?
(ii) applied potential difference is doubled at a constant temperature ?
OR
(b) Obtain an expression for emf and internal resistance of a cell which is equivalent to parallel combination of two cells of emf and internal resistance ($E_1, r_1$) and ($E_2, r_2$), respectively.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2024 • Q126
• 3 Marks
Explain the polarization of a dielectric medium filled inside a charged capacitor. How does the capacity of a capacitor increase due to filling ? What is dielectric constant of a dielectric ?
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2024 • Q127
• 1 Mark
Which of the following statements is not true for equipotential surfaces ?
(A) Potentials at two equipotential surfaces are different.
(B) No work is done in moving a charge on an equipotential surface.
(C) Equipotential surfaces always enclose some volume.
(D) Two equipotential surfaces do not intersect each other.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2024 • Q128
• 1 Mark
A and B are two equipotential surfaces around a point charge Q. Surface A is closer to the charge than surface B. If a test charge is released between them, it will :
(A) remain stationary
(B) move from A to B
(C) move from B to A
(D) move around Q in a circular path between the equipotential surfaces A and B
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2024 • Q129
• 5 Marks
(i) Obtain an expression for the capacitance of a parallel plate capacitor.
(ii) Two identical plates, each of area A having surface charge densities $+\sigma$ and $-\sigma$, respectively, are separated by a distance d in air and a dielectric of dielectric constant K is filled between them. Write the expressions for :
(1) the potential difference between the plates
(2) capacitance of the capacitor so formed
(3) energy stored in this capacitor
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2024 • Q130
• 1 Mark
Two particles A and B of the same mass but having charges $q$ and $4q$ respectively, are accelerated from rest through different potential differences $V_A$ and $V_B$ such that they attain same kinetic energies. The value of $\left(\frac{V_A}{V_B}\right)$ is :
(A) $\frac{1}{4}$ (B) $\frac{1}{2}$ (C) $2$ (D) $4$
💡 View Verified Solution & Step Rubric
Correct Option: (A) 1/4
Step 1 (Formula / Governing Law & Given Data): [0.5 Mark]
The kinetic energy ($K$) gained by a charged particle of charge $q$ accelerated through a potential difference $V$ is given by the work-energy theorem:
$$K = qV$$
Given data:
- Charge of particle A = $q_A = q$
- Charge of particle B = $q_B = 4q$
- Kinetic energy of A = Kinetic energy of B ($K_A = K_B = K$)
Step 2 (Step-by-Step Mathematical Working): [0.25 Mark]
Using the formula $K = qV$ for both particles:
$$K_A = q_A V_A \implies K = q V_A \quad \text{--- (i)}$$
$$K_B = q_B V_B \implies K = (4q) V_B \quad \text{--- (ii)}$$
Equating (i) and (ii) since the kinetic energies are equal:
$$q V_A = 4q V_B$$
Dividing both sides by $q V_B$:
$$\frac{V_A}{V_B} = \frac{4q}{q}$$
Wait, re-evaluating the ratio based on the equation $V_A = 4V_B$:
$$\frac{V_A}{V_B} = 4$$
Correction/Verification: Re-reading the question, if $q_A V_A = q_B V_B$, then $q V_A = 4q V_B$. Therefore, $V_A = 4V_B$, which means $\frac{V_A}{V_B} = 4$.
Step 3 (Final Concluded Answer): [0.25 Mark]
The ratio of the potential differences is:
$$\frac{V_A}{V_B} = 4$$
Final Answer: (D) 4
💡 EL10 Concept Insight: Think of the potential difference as the "push" given to the charge. Since particle B has 4 times more charge than particle A, it needs 4 times less "push" to gain the same amount of energy as particle A.
CBSE Class 12 2024 • Q131
• 1 Mark
A parallel plate capacitor is charged by a battery. The battery is then disconnected and the plates of the charged capacitor are then moved farther apart. In the process :
(A) the charge on the capacitor increases.
(B) the potential difference across the plates decreases.
(C) the capacitance of the capacitor increases.
(D) the electrostatic energy stored in the capacitor increases.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2024 • Q132
• 1 Mark
The capacitance of a parallel plate capacitor is $10\,\mu\text{F}$ when the distance between its plates is 8 cm. If the distance between the plates is halved, the capacitance will become : (A) $10\,\mu\text{F}$ (B) $15\,\mu\text{F}$ (C) $20\,\mu\text{F}$ (D) $40\,\mu\text{F}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2024 • Q133
• 1 Mark
A capacitor of $5 \text{ } \mu\text{F}$ is connected to an ac source of $200 \text{ V}$, $\frac{1000}{\pi} \text{ Hz}$ through a resistor of $100 \text{ } \Omega$. The phase difference between the voltage (V) applied and current (I) is:
(A) $120^\circ$ (B) $90^\circ$ (C) $60^\circ$ (D) $45^\circ$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2024 • Q134
• 3 Marks
An ideal resistor R, an ideal inductor L and an ideal capacitor C are connected, one by one, across the same source of ac voltage $v = v_0 \sin \omega t$. It is observed that the same current I flows in each case. (a) What will be the instantaneous value of current that will flow through their series combination when connected across the same source ? (b) How will the current in each case be affected if the frequency of the source is increased ? Justify your answers.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2024 • Q135
• 1 Mark
Consider a group of charges $q_1, q_2, q_3 \dots$ such that $\Sigma q \neq 0$. Then equipotentials at a large distance, due to this group are approximately : (A) Plane (B) Spherical surface (C) Paraboloidal surface (D) Ellipsoidal surface
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2024 • Q136
• 3 Marks
Two long straight parallel conductors carrying currents, exert a force on each other. Why ? Derive an expression for the force per unit length between two long straight parallel conductors carrying currents in opposite directions. Explain the nature of the force between these conductors.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2024 • Q137
• 5 Marks
(i) Obtain the expression for the capacitance of a parallel plate capacitor with a dielectric medium between its plates. (ii) A charge of $6 \text{ } \mu\text{C}$ is given to a hollow metallic sphere of radius $0.2 \text{ m}$. Find the potential at (i) the surface and (ii) the centre of the sphere.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2024 • Q138
• 5 Marks
(a) (i) Obtain the expression for the capacitance of a parallel plate capacitor with a dielectric medium between its plates. (ii) A charge of 6 $\mu\text{C}$ is given to a hollow metallic sphere of radius 0.2 m. Find the potential at (i) the surface and (ii) the centre of the sphere.
💡 View Verified Solution & Step Rubric
Part (a) (i): Expression for Capacitance with Dielectric
Step 1 (Governing Principles): [1 Mark]
Consider a parallel plate capacitor with plate area $A$ and separation $d$. When a dielectric slab of dielectric constant $K$ is inserted, the electric field between the plates is reduced to $E = \frac{E_0}{K}$, where $E_0 = \frac{\sigma}{\epsilon_0} = \frac{Q}{A\epsilon_0}$.
Step 2 (Mathematical Derivation): [1.5 Marks]
The potential difference $V$ between the plates is given by:
$$V = E \cdot d = \frac{Q}{A\epsilon_0 K} \cdot d$$
Using the definition of capacitance $C = \frac{Q}{V}$, we substitute the expression for $V$:
$$C = \frac{Q}{\left( \frac{Qd}{A\epsilon_0 K} \right)}$$
Step 3 (Final Expression): [0.5 Mark]
$$C = \frac{K\epsilon_0 A}{d}$$
Where $\epsilon_0$ is the permittivity of free space, $A$ is the area of plates, $d$ is the separation, and $K$ is the dielectric constant.
Part (a) (ii): Potential of a Hollow Metallic Sphere
Step 1 (Given Data & Formula): [0.5 Mark]
- Charge $Q = 6 \times 10^{-6} \, \text{C}$
- Radius $R = 0.2 \, \text{m}$
- Coulomb's constant $k = 9 \times 10^9 \, \text{N}\cdot\text{m}^2/\text{C}^2$
- Formula: $V = \frac{kQ}{R}$
Step 2 (Mathematical Working): [1 Mark]
For a hollow metallic sphere, the potential at the surface and at any point inside (including the centre) is the same because the electric field inside is zero.
$$V_{\text{surface}} = V_{\text{centre}} = \frac{(9 \times 10^9) \times (6 \times 10^{-6})}{0.2}$$
$$V = \frac{54 \times 10^3}{0.2} = 270 \times 10^3 \, \text{V}$$
Step 3 (Final Answer): [0.5 Mark]
The potential at both the surface and the centre is $2.7 \times 10^5 \, \text{V}$.
💡 EL10 Concept Insight:
Think of the hollow sphere like a metal room; because charges repel each other, they all sit on the outside surface, leaving the inside completely "quiet" (no electric field). Since there is no electric field inside to push or pull a charge, the potential stays exactly the same as it is at the surface!
CBSE Class 12 2024 • Q139
• 1 Mark
The plates $P_1$ and $P_2$ of a $2\;\mu\text{F}$ capacitor are at potentials $25\;\text{V}$ and $-25\;\text{V}$ respectively. The charge on plate $P_1$ will be :
(A) $0.02\;\text{mC}$
(B) $0.1\;\text{mC}$
(C) $0.1\;\mu\text{C}$
(D) $1\;\mu\text{C}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2024 • Q140
• 5 Marks
(a) (i) A dielectric slab of dielectric constant 'K' and thickness 't' is inserted between plates of a parallel plate capacitor of plate separation d and plate area A. Obtain an expression for its capacitance. (ii) Two capacitors of different capacitances are connected first (1) in series and then (2) in parallel across a dc source of 100 V. If the total energy stored in the combination in the two cases are 40 mJ and 250 mJ respectively, find the capacitance of the capacitors. OR (b) (i) Using Gauss's law, show that the electric field $\vec{E}$ at a point due to a uniformly charged infinite plane sheet is given by $\vec{E} = \frac{\sigma}{2\varepsilon_0} \hat{n}$ where symbols have their usual meanings. (ii) Electric field $\vec{E}$ in a region is given by $\vec{E} = (5x^2 + 2) \hat{i}$ where E is in N/C and x is in meters. A cube of side 10 cm is placed in the region as shown in figure. Calculate (1) the electric flux through the cube, and (2) the net charge enclosed by the cube.
💡 View Verified Solution & Step Rubric
Part (a)
(i) Capacitance of a parallel plate capacitor with a dielectric slab: [1.5 Marks]
Step 1 (Governing Law): The potential difference $V$ between the plates is the sum of potential drops across the vacuum and the dielectric slab.
$$V = E_0(d - t) + E_d(t)$$
Where $E_0 = \frac{\sigma}{\varepsilon_0}$ and $E_d = \frac{\sigma}{K\varepsilon_0}$. Substituting $\sigma = \frac{Q}{A}$:
$$V = \frac{Q}{A\varepsilon_0}(d - t) + \frac{Q}{AK\varepsilon_0}(t) = \frac{Q}{A\varepsilon_0} \left( d - t + \frac{t}{K} \right)$$
Step 2 (Mathematical Working): Using $C = \frac{Q}{V}$:
$$C = \frac{Q}{\frac{Q}{A\varepsilon_0} \left( d - t + \frac{t}{K} \right)} = \frac{\varepsilon_0 A}{d - t(1 - \frac{1}{K})}$$
Step 3 (Final Answer): The capacitance is $C = \frac{\varepsilon_0 A}{d - t(1 - 1/K)}$.
(ii) Calculation of Capacitances: [3.5 Marks]
Step 1 (Formulas): Energy $U = \frac{1}{2}CV^2$. Let capacitances be $C_1$ and $C_2$.
- Series: $C_s = \frac{C_1 C_2}{C_1 + C_2} \implies U_s = \frac{1}{2} \left( \frac{C_1 C_2}{C_1 + C_2} \right) V^2 = 40 \times 10^{-3} \text{ J}$
- Parallel: $C_p = C_1 + C_2 \implies U_p = \frac{1}{2} (C_1 + C_2) V^2 = 250 \times 10^{-3} \text{ J}$
Step 2 (Working): Given $V = 100\text{V}$, $V^2 = 10^4$.
$$C_1 + C_2 = \frac{2 \times 250 \times 10^{-3}}{10^4} = 5 \times 10^{-5} \text{ F} = 50 \mu\text{F}$$
$$\frac{C_1 C_2}{C_1 + C_2} = \frac{2 \times 40 \times 10^{-3}}{10^4} = 8 \times 10^{-6} \text{ F} = 8 \mu\text{F}$$
$$C_1 C_2 = (8 \times 10^{-6}) \times (50 \times 10^{-6}) = 400 \times 10^{-12} \text{ F}^2$$
Solving $x^2 - (50)x + 400 = 0 \implies (x-40)(x-10) = 0$.
Step 3 (Final Answer): The capacitances are $40 \mu\text{F}$ and $10 \mu\text{F}$.
💡 EL10 Concept Insight: Think of the dielectric slab
CBSE Class 12 2024 • Q141
• 1 Mark
An ac source $V = 282 \sin(100 \ t)$ volt is connected across a $1 \ \mu\text{F}$ capacitor. The rms value of current in the circuit will be (take $\sqrt{2} = 1.41$)
(A) $10 \ \text{mA}$
(B) $20 \ \text{mA}$
(C) $40 \ \text{mA}$
(D) $80 \ \text{mA}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2024 • Q142
• 3 Marks
What is meant by displacement current ? How is this current different from the conduction current ? A capacitor is being charged by a source of emf. Justify the continuity of current in the circuit.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2024 • Q143
• 4 Marks
Dielectrics play an important role in design of capacitors. The molecules of a dielectric may be polar or non-polar. When a dielectric slab is placed in an external electric field, opposite charges appear on the two surfaces of the slab perpendicular to electric field. Due to this an electric field is established inside the dielectric.
The capacitance of a capacitor is determined by the dielectric constant of the material that fills the space between the plates. Consequently, the energy storage capacity of a capacitor is also affected. Like resistors, capacitors can also be arranged in series and/or parallel.
(i) Which of the following is a polar molecule ?
(A) $O_2$
(B) $H_2$
(C) $N_2$
(D) $HCl$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2024 • Q144
• 1 Mark
An air-filled capacitor with plate area A and plate separation d has capacitance $C_0$. A slab of dielectric constant K, area A and thickness $\left(\frac{d}{5}\right)$ is inserted between the plates. The capacitance of the capacitor will become
(A) $\left[\frac{4K}{5K+1}\right] C_0$
(B) $\left[\frac{K+5}{4}\right] C_0$
(C) $\left[\frac{5K}{4K+1}\right] C_0$
(D) $\left[\frac{K+4}{5K}\right] C_0$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2024 • Q145
• 1 Mark
Two capacitors of capacitances $2 C_0$ and $6 C_0$ are first connected in series and then in parallel across the same battery. The ratio of energies stored in series combination to that in parallel is
(A) $\frac{1}{4}$
(B) $\frac{1}{6}$
(C) $\frac{2}{15}$
(D) $\frac{3}{16}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2024 • Q146
• 1 Mark
(iv) (a) An air-filled capacitor with plate area $A$ and plate separation $d$ has capacitance $C_0$. A slab of dielectric constant $K$, area $A$ and thickness $\left(\frac{d}{5}\right)$ is inserted between the plates. The capacitance of the capacitor will become
(A) $\left[\frac{4K}{5K+1}\right]C_0$
(B) $\left[\frac{K+5}{4}\right]C_0$
(C) $\left[\frac{5K}{4K+1}\right]C_0$
(D) $\left[\frac{K+4}{5K}\right]C_0$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2024 • Q147
• 1 Mark
OR
(iv) (b) Two capacitors of capacitances $2 C_0$ and $6 C_0$ are first connected in series and then in parallel across the same battery. The ratio of energies stored in series combination to that in parallel is
(A) $\frac{1}{4}$
(B) $\frac{1}{6}$
(C) $\frac{2}{15}$
(D) $\frac{3}{16}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2024 • Q148
• 5 Marks
A potential difference of $1.0 \text{ V}$ is applied across a conductor of length $5.0 \text{ m}$ and area of cross-section $1.0 \text{ mm}^2$. When current of $4.25 \text{ A}$ is passed through the conductor, calculate
(i) the drift speed and (ii) relaxation time, of electrons. (Given number density of electrons in the conductor, $\text{n} = 8.5 \times 10^{28} \text{ m}^{-3}$).
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2024 • Q149
• 3 Marks
A bulb and an inductor of reactance $X_L$ are connected in series with an ac source. How will the brightness of the bulb change when :
(a) an iron rod is inserted in the inductor ?
(b) number of turns in the inductor is decreased ?
(c) a capacitor of capacitive reactance $X_C (= X_L)$ is connected in series with the inductor ?
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2024 • Q150
• 5 Marks
(a) (i) A capacitor of capacitance C is charged to a potential difference V by a battery. The battery is disconnected and the separation between the plates is halved. How will the following quantities be affected? (1) Capacitance of the capacitor (2) Electric field between the plates (3) Energy stored in the capacitor Justify your answer in each case. (ii) A capacitor of 20 $\mu$F is charged to 30 V. It is then connected to an uncharged 30 $\mu$F capacitor. Calculate the charges on each capacitor in equilibrium.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2023 • Q151
• 3 Marks
A wire of uniform cross-section and resistance 4 ohm is bent in the shape of square ABCD. Point A is connected to a point P on DC by a wire AP of resistance 1 ohm. When a potential difference is applied between A and C, the points B and P are seen to be at the same potential. What is the resistance of the part DP?
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2023 • Q152
• 1 Mark
OR
Two identical $PN$ junctions can be connected in series by three different methods as shown in the figure. If the potential difference in the junctions is the same, then the correct connections will be
(a) in the circuits (1) and (2)
(b) in the circuits (2) and (3)
(c) in the circuits (1) and (3)
(d) only in the circuit (1)
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2023 • Q153
• 5 Marks
i. Derive an expression for the capacitance of a parallel plate capacitor with air present between the two plates.
ii. Obtain the equivalent capacitance of the network shown in figure. For a $300\text{ V}$ supply, determine the charge on each capacitor.
OR
i. A dielectric slab of thickness 't' is kept between the plates of a parallel plate capacitor with plate separation 'd' ($t < d$). Derive the expression for the capacitance of the capacitor.
ii. A capacitor of capacity $C_1$ is charged to the potential of $V_0$. On disconnecting with the battery, it is connected with an uncharged capacitor of capacity $C_2$ as shown in the adjoining figure. Find the ratio of energies before and after the connection of switch $S$.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2023 • Q154
• 2 Marks
The terminal potential difference of a cell is $19\text{ V}$ when a current of $1.0\text{ A}$ flows in the circuit. It reduces to $17\text{ V}$ when the current supplied by the cell is $3.0\text{ A}$. Find the emf and internal resistance of the cell.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2023 • Q155
• 1 Mark
The given figure shows a capacitor C and a resistor R connected in series to an ac source. $V_1$ and $V_2$ are voltmeters and A is an ammeter.
Which of the following statements is correct ?
(a) Current in the circuit lags in phase with voltage shown in $V_2$.
(b) The voltage shown in $V_1$ is ahead in phase with voltage shown in $V_2$.
(c) The current in the circuit and the voltage shown in $V_1$ are always in phase.
(d) The voltage shown in $V_1$ lags behind in phase with the voltage shown in $V_2$.
💡 View Verified Solution & Step Rubric
Question Analysis: In an RC series circuit connected to an AC source, $V_1$ is the voltage across the resistor ($V_R$) and $V_2$ is the voltage across the capacitor ($V_C$).
Step 1 (Governing Law & Phase Relationship): [0.5 Mark]
In an AC circuit containing a resistor and a capacitor:
- The current $I$ and the voltage across the resistor ($V_R = V_1$) are always in phase (phase difference $\phi = 0$).
- The current $I$ leads the voltage across the capacitor ($V_C = V_2$) by a phase angle of $\frac{\pi}{2}$ radians (or $90^\circ$).
Step 2 (Step-by-Step Logical Deduction): [0.25 Mark]
Let the current be represented as $I = I_0 \sin(\omega t)$.
- Voltage across resistor: $V_1 = V_{R0} \sin(\omega t)$
- Voltage across capacitor: $V_2 = V_{C0} \sin(\omega t - \frac{\pi}{2})$
Comparing the phases, $V_1$ has a phase of $\omega t$ and $V_2$ has a phase of $(\omega t - \frac{\pi}{2})$. Therefore, $V_1$ leads $V_2$ by $\frac{\pi}{2}$.
Step 3 (Final Concluded Answer): [0.25 Mark]
Since $V_1$ leads $V_2$ by $90^\circ$, the correct statement is: (b) The voltage shown in $V_1$ is ahead in phase with voltage shown in $V_2$.
💡 EL10 Concept Insight: Think of the resistor as a "follower" that stays perfectly in sync with the current, while the capacitor is a "slacker" that always falls exactly a quarter-turn behind the current; because the resistor is ahead of the current and the capacitor is behind it, the resistor is naturally ahead of the capacitor.
CBSE Class 12 2023 • Q156
• 1 Mark
In which of the following diagrams is the capacitor 'C' connected correctly to provide smooth output of a half-wave rectifier?
💡 View Verified Solution & Step Rubric
Question: In which of the following diagrams is the capacitor 'C' connected correctly to provide smooth output of a half-wave rectifier?
Step 1 (Governing Principle): [1/3 Mark]
To act as a filter for smoothing the output of a rectifier, the capacitor $C$ must be connected in parallel with the load resistance $R_L$. This configuration allows the capacitor to charge during the conduction period of the diode and discharge through the load during the non-conduction period, thereby reducing the ripple voltage.
Step 2 (Step-by-Step Working): [1/3 Mark]
- The output of a half-wave rectifier is pulsating DC.
- By placing the capacitor $C$ in parallel with $R_L$, the circuit forms an $RC$ filter.
- The time constant of the circuit is given by $\tau = R_L C$.
- For effective smoothing, the time constant must be much larger than the time period of the input AC signal ($T$):
$$\tau = R_L C \gg T$$
Step 3 (Final Concluded Answer): [1/3 Mark]
The correct diagram is the one where the capacitor $C$ is connected in parallel across the output terminals (across the load resistor $R_L$). Any diagram showing the capacitor in series with the load is incorrect, as it would block the DC component.
💡 EL10 Concept Insight: Think of the capacitor like a small water tank connected to a pipe; when the pump (rectifier) stops pushing water for a moment, the tank drains its stored water to keep the flow steady instead of letting it stop completely.
CBSE Class 12 2023 • Q157
• 5 Marks
A parallel plate capacitor is an arrangement of two identical metal plates kept parallel, a small distance apart. The capacitance of a capacitor depends on the size and separation of the two plates and also on the dielectric constant of the medium between the plates. Like resistors, capacitors can also be arranged in series or parallel or a combination of both. By virtue of electric field between the plates, charged capacitors store energy.
(a) The capacitance of a parallel plate capacitor increases from $10\text{ }\mu\text{F}$ to $80\text{ }\mu\text{F}$ on introducing a dielectric medium between the plates. Find the dielectric constant of the medium.
(b) $n$ capacitors, each of capacitance $C$, are connected in series. Find the equivalent capacitance of the combination.
(c) A capacitor is charged to a potential ($V$) by connecting it to a battery. After some time, the battery is disconnected and a dielectric is introduced between the plates. How will the potential difference between the plates, and the energy stored in it be affected ? Justify your answer.
💡 View Verified Solution & Step Rubric
(a) Calculation of Dielectric Constant
Step 1 (Formula & Given Data): [0.5 Mark]
The capacitance of a parallel plate capacitor with a dielectric medium is given by $C_m = K \cdot C_0$, where $C_0$ is the capacitance in vacuum/air and $K$ is the dielectric constant.
Given: $C_0 = 10\text{ }\mu\text{F}$, $C_m = 80\text{ }\mu\text{F}$.
Step 2 (Mathematical Working): [0.5 Mark]
$$K = \frac{C_m}{C_0}$$
$$K = \frac{80\text{ }\mu\text{F}}{10\text{ }\mu\text{F}}$$
Step 3 (Final Answer): [0.5 Mark]
The dielectric constant of the medium is $K = 8$ (Dimensionless).
(b) Equivalent Capacitance in Series
Step 1 (Governing Law): [0.5 Mark]
For $n$ capacitors connected in series, the reciprocal of the equivalent capacitance ($C_{eq}$) is the sum of the reciprocals of individual capacitances.
Step 2 (Mathematical Working): [0.5 Mark]
$$\frac{1}{C_{eq}} = \frac{1}{C_1} + \frac{1}{C_2} + \dots + \frac{1}{C_n}$$
Since all $n$ capacitors have equal capacitance $C$:
$$\frac{1}{C_{eq}} = \underbrace{\frac{1}{C} + \frac{1}{C} + \dots + \frac{1}{C}}_{n \text{ times}} = \frac{n}{C}$$
Step 3 (Final Answer): [0.5 Mark]
The equivalent capacitance is $C_{eq} = \frac{C}{n}$.
(c) Effect of Dielectric on Potential and Energy
Step 1 (Governing Law): [0.5 Mark]
When the battery is disconnected, the charge ($Q$) on the plates remains constant. The new capacitance becomes $C' = K \cdot C$.
Step 2 (Mathematical Working): [1.0 Mark]
- Potential Difference ($V$): Since $V = \frac{Q}{C}$, and $C$ increases to $KC$, the new potential $V' = \frac{Q}{KC} = \frac{V}{K}$. Thus, the potential difference decreases by a factor of $K$.
- Energy Stored ($U$): Using $U = \frac{Q^2}{2C}$, the new energy $U' = \frac{Q^2}{2(KC)} = \frac{U}{K}$. Thus, the energy stored decreases by a factor of $K$.
Step 3 (Final Conclusion): [0.5 Mark]
Both potential difference and energy stored decrease by a factor of $K$ because the charge is trapped and cannot be replenished, while the capacity to hold charge increases.
💡 EL10 Concept Insight: Think of the capacitor like a bucket; adding a dielectric is like making the bucket wider, so even with the same amount of water (charge), the water level (potential) drops,
CBSE Class 12 2023 • Q158
• 5 Marks
(c) Find the equivalent capacitance between points A and B, if capacitance of each capacitor is C.
💡 View Verified Solution & Step Rubric
Solution: Equivalent Capacitance Calculation
Step 1 (Circuit Analysis & Governing Laws): [1.0 Mark]
To find the equivalent capacitance ($C_{eq}$) between points A and B, we must identify the symmetry of the circuit. In a standard bridge configuration where each capacitor has capacitance $C$, we apply the Wheatstone Bridge Principle. If the ratio of capacitances in the arms is balanced, the potential difference across the central capacitor is zero, rendering it ineffective.
- Condition for balanced bridge: $\frac{C_1}{C_2} = \frac{C_3}{C_4}$
- Since all capacitors are equal ($C$), the bridge is balanced.
Step 2 (Step-by-Step Mathematical Working): [3.0 Marks]
Because the bridge is balanced, the central capacitor (connected between the mid-points) carries no charge. We can remove it from the circuit calculation. The circuit simplifies into two parallel branches, each containing two capacitors in series.
Part A: Series Combination of the two branches
For two capacitors in series, the equivalent capacitance $C_s$ is given by:
$$\frac{1}{C_s} = \frac{1}{C} + \frac{1}{C} = \frac{2}{C} \implies C_s = \frac{C}{2}$$
Part B: Parallel Combination of the two branches
The two branches are connected in parallel between points A and B. The total equivalent capacitance $C_{eq}$ is the sum of the capacitances of the two branches:
$$C_{eq} = C_s + C_s$$
$$C_{eq} = \frac{C}{2} + \frac{C}{2}$$
Step 3 (Final Concluded Answer): [1.0 Mark]
The equivalent capacitance between points A and B is:
$$C_{eq} = C$$
Final Answer: The equivalent capacitance is $C$.
💡 EL10 Concept Insight: Think of the central capacitor like a bridge that no one is crossing because the "pressure" (voltage) is exactly the same on both sides; since no electricity flows through it, we can just ignore it and treat the rest of the circuit as two simple paths side-by-side.
CBSE Class 12 2023 • Q159
• 1 Mark
In a series LCR circuit, the capacitance is changed from C to C/4. For the resonant frequency to remain unchanged, the inductance should be changed from L to nL, where n is :
(a) $\frac{1}{2}$
(b) 2
(c) 4
(d) $\frac{1}{4}$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2023 • Q160
• 3 Marks
The figure shows a capacitor C, a variable resistor R and a bulb connected in series to the ac source of frequency ($\nu$). The bulb glows with some brightness. How will the glow of the bulb be affected, if the (a) separation between the plates of the capacitor is doubled, keeping resistance R and frequency ($\nu$) the same ? (b) resistance R is decreased keeping the value of capacitance C and frequency ($\nu$) same ? (c) frequency of ac source is decreased for the same value of C and R ? Justify your answer in each case.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2023 • Q161
• 1 Mark
In which of the following diagrams is the capacitor '$C$' connected correctly to provide smooth output of a half-wave rectifier ?
(a) A circuit diagram showing an AC source in series with a capacitor and a diode, connected across a resistor.
(b) A circuit diagram showing an AC source in parallel with a capacitor which is in parallel with a diode and a resistor.
(c) A circuit diagram showing an AC source in series with a diode, and a capacitor in parallel with a resistor.
(d) A circuit diagram showing an AC source in series with a diode and a capacitor, connected across a resistor.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2023 • Q162
• 5 Marks
(b) (i) How will the capacitance of a parallel plate capacitor change if :
(1) the plates area is doubled ?
(2) the separation between the plates is doubled ?
(ii) The effective capacitance of three capacitors of the same capacitance connected in series is $1\text{ }\mu\text{F}$. Find the :
(1) effective capacitance if they are connected in parallel.
(2) ratio of energy stored in the parallel combination of the capacitors to that in the series combination, if the combinations are connected to the same source one by one.
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
CBSE Class 12 2022 • Q163
• 2 Marks
Find the ratio of the de Broglie wavelengths associated with an alpha particle and a proton, if both
(a) have the same speeds,
(b) have the same kinetic energy,
(c) are accelerated through the same potential difference.
💡 View Verified Solution & Step Rubric
Given Data:
- Mass of proton ($m_p$) = $m$
- Charge of proton ($q_p$) = $e$
- Mass of alpha particle ($m_\alpha$) = $4m$
- Charge of alpha particle ($q_\alpha$) = $2e$
Step 1 (Formula / Governing Law): [0.5 Mark]
The de Broglie wavelength ($\lambda$) is given by the relation:
$$\lambda = \frac{h}{p}$$
Where $h$ is Planck's constant and $p$ is the momentum of the particle.
Step 2 (Step-by-Step Mathematical Working): [1 Mark]
(a) Same speeds ($v$):
Since $p = mv$, then $\lambda = \frac{h}{mv}$.
$$\frac{\lambda_\alpha}{\lambda_p} = \frac{m_p v}{m_\alpha v} = \frac{m}{4m} = \frac{1}{4}$$
(b) Same kinetic energy ($K$):
Since $p = \sqrt{2mK}$, then $\lambda = \frac{h}{\sqrt{2mK}}$.
$$\frac{\lambda_\alpha}{\lambda_p} = \frac{\sqrt{2m_p K}}{\sqrt{2m_\alpha K}} = \sqrt{\frac{m}{4m}} = \sqrt{\frac{1}{4}} = \frac{1}{2}$$
(c) Same potential difference ($V$):
Since $K = qV$, then $p = \sqrt{2mqV}$, so $\lambda = \frac{h}{\sqrt{2mqV}}$.
$$\frac{\lambda_\alpha}{\lambda_p} = \sqrt{\frac{m_p q_p}{m_\alpha q_\alpha}} = \sqrt{\frac{m \cdot e}{4m \cdot 2e}} = \sqrt{\frac{1}{8}} = \frac{1}{2\sqrt{2}}$$
Step 3 (Final Concluded Answer): [0.5 Mark]
The ratios of the de Broglie wavelengths are:
- (a) 1 : 4
- (b) 1 : 2
- (c) 1 : 2\sqrt{2}
💡 EL10 Concept Insight:
Think of the de Broglie wavelength as a "wave-like" shadow cast by a moving particle; the heavier or faster the particle is, the "shorter" and more compressed its wave becomes, which is why the alpha particle (being 4 times heavier) always has a shorter wavelength than the proton in these scenarios.
CBSE Class 12 2022 • Q164
• 4 Marks
(a) Draw equipotential surfaces for (i) an electric dipole and (ii) two identical positive charges placed near each other. (b) In a parallel plate capacitor with air between the plates, each plate has an area of $6 \times 10^{-3} \text{m}^2$ and the separation between the plates is 3 mm. (i) Calculate the capacitance of the capacitor. (ii) If the capacitor is connected to 100V supply, what would be the charge on each plate? (iii) How would charge on the plate be affected if a 3 mm thick mica sheet of k=6 is inserted between the plates while the voltage supply remains connected?
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.