JEE Main 2026 • Q1
Match the LIST-I with LIST-II
| List-I | List-II |
|---|
| A. Planck's constant | I. $ML^2T^{-2}$ |
| B. Stopping potential | II. $T^{-1}$ |
| C. Work function | III. $ML^2T^{-1}$ |
| D. Threshold frequency | IV. $ML^2T^{-3}A^{-1}$ |
Choose the correct answer from the options given below :
💡 View Verified Solution & Step Rubric
(i) $[h] = \frac{[E]}{[v]} = \frac{ML^2T^{-2}}{T^{-1}} = ML^2T^{-1}$
(ii) Stopping potential : $E = q.V_0$
$[V_0] = [v_0] = \frac{[E]}{[q]} = \frac{ML^2T^{-2}}{AT} = ML^2T^{-3}A^{-1}$
(iii) Work function $(\phi) \rightarrow$ Energy form
$[\phi] = ML^2T^{-2}$
(iv) Threshold freq. $[v_0] = T^{-1}$
JEE Main 2026 • Q2
The de Broglie wavelength of an oxygen molecule at $27^{\circ}\text{C}$ is $x \times 10^{-12}\text{ m}$. The value of $x$ is (take Planck's constant $= 6.63 \times 10^{-34}\text{ J}\cdot\text{s}$, Boltzmann constant $= 1.38 \times 10^{-23}\text{ J/K}$, mass of oxygen Molecule $= 5.31 \times 10^{-26}\text{ kg}$).
💡 View Verified Solution & Step Rubric
$\lambda = \frac{\text{h}}{\sqrt{2mK}} = \frac{\text{h}}{\sqrt{2m\left(\frac{3}{2}\text{kT}\right)}}$$\n\n$\lambda = \frac{\text{h}}{\sqrt{3mkT}}$$\n\n$= \frac{6.63 \times 10^{-34}}{\sqrt{3 \times 5.31 \times 10^{-26} \times 1.38 \times 10^{-23} \times 300}}$$\n\n$= 2.58 \times 10^{-11} = 25.8 \times 10^{-12}$\n\nSo, $x = 26$
JEE Main 2026 • Q3
The graph shows variation of stopping potential $V_0$ with the frequency $\nu$ of the incident radiation for three photosensitive metals $X_1$, $X_2$ and $X_3$. Which metal will give out electrons with greater kinetic energy, for the same wavelength of incident radiation?
💡 View Verified Solution & Step Rubric
From Einstein's photoelectric equation:
$$h\nu = \phi + e V_0 \implies V_0 = \frac{h\nu}{e} - \frac{\phi}{e}$|
For $V_0 = 0$, $\frac{h\nu}{e} = \frac{\phi}{e}$, so the work function $\phi$ is directly proportional to threshold frequency $\nu_0$.
From the given graph, threshold frequencies are in the ratio:
$$\nu_1 : \nu_2 : \nu_3 = 1.0 : 1.5 : 2$$
Thus, work functions are in the ratio:
$$\phi_1 : \phi_2 : \phi_3 = 1 : 1.5 : 2$$
As metal $X_1$ has the minimum value of work function, for the same wavelength of incident radiation, $X_1$ will give out photoelectrons with maximum kinetic energy ($K_{max} = h\nu - \phi$).
JEE Main 2026 • Q4
When a light of a given wavelength falls on a metallic surface the stopping potential for photoelectrons is $3.2\text{ V}$. If a second light having wavelength twice of first light is used, the stopping potential drops to $0.7\text{ V}$. The wavelength of first light is __________ $\text{m}$. ($h = 6.63 \times 10^{-34}\text{ J.s}$, $e = 1.6 \times 10^{-19}\text{ C}$, $c = 3 \times 10^8\text{ m/s}$)
💡 View Verified Solution & Step Rubric
$q(3.2) = \frac{hc}{\lambda} - \phi \quad ...(1)$
$q(0.7) = \frac{hc}{2\lambda} - \phi \quad ...(2)$
Eq. (1) - Eq. (2):
$q(2.5) = \frac{hc}{2\lambda}$
$2.5 = \left(\frac{hc}{e}\right)\left(\frac{1}{2\lambda}\right)$
$2.5 = \frac{12400}{2(\lambda)}$
$\lambda = \frac{12400}{5} \text{ \AA}$
$\lambda = 2480 \text{ \AA}$
$\lambda = 2.48 \times 10^{-7}\text{ m} \approx 2.5 \times 10^{-7}\text{ m}$
JEE Main 2026 • Q5
An electron of mass $m$ is moving in an electric field $\vec{E} = -2E_0\hat{i}$ ($E_0 = \text{constant} > 0$), with an initial velocity $\vec{V} = v_0\hat{i}$ ($v_0 = \text{constant} > 0$). If $\lambda_0 = \frac{h}{4mv_0}$, its de Broglie wavelength at time $t$ is __________. ($e$ = charge of electron)
💡 View Verified Solution & Step Rubric
Force on electron $F = qE = (-e)(-2E_0\hat{i}) = 2eE_0\hat{i}$
Acceleration $a = \frac{F}{m} = \frac{2eE_0}{m}$
Using equation of motion:
$V = U + at$
$V = v_0 + \left(\frac{2eE_0}{m}\right)t$
de Broglie wavelength $\lambda = \frac{h}{mV} = \frac{h}{m\left(v_0 + \frac{2eE_0 t}{m}\right)}$
Given $\lambda_0 = \frac{h}{4mv_0} \Rightarrow h = 4\lambda_0 m v_0$
Substitute $h$ into the wavelength equation:
$$\lambda = \frac{4\lambda_0 m v_0}{m \left(v_0 + \frac{2eE_0 t}{m}\right)}$$
$$\lambda = \frac{4\lambda_0}{1 + \frac{2eE_0}{mv_0}t}$$
JEE Main 2026 • Q6
The minimum frequency of photon required to break a particle of mass $15.348\text{ amu}$ into $4\alpha$ particles is ______ $\text{kHz}$.
[mass of $\text{He}$ nucleus $= 4.002\text{ amu}$, $1\text{ amu} = 1.66 \times 10^{-27}\text{ kg}$, $h = 6.6 \times 10^{-34}\text{ J.s}$ and $c = 3 \times 10^8\text{ m/s}$]
💡 View Verified Solution & Step Rubric
$h\nu = (4 \times 4.002 - 15.348) \times 1.66 \times 10^{-27} \times (3 \times 10^8)^2$
$\nu = 14.94 \times 10^{19}\text{ kHz}$
JEE Main 2026 • Q7
Number of photons of equal energy emitted per second by a $6 \text{ mW}$ laser source operating at $663 \text{ nm}$ is ______.
(Given : $h = 6.63 \times 10^{-34} \text{ J.s}$ and $c = 3 \times 10^8 \text{ m/s}$)
💡 View Verified Solution & Step Rubric
$P = \frac{nhC}{\lambda}$
$6 \times 10^{-3} = \frac{n \times 6.63 \times 10^{-34} \times 3 \times 10^8}{663 \times 10^{-9}}$
$n = 2 \times 10^{16} \text{ photons}$
JEE Main 2026 • Q8
A light wave described by $E = 60\sin(3 \times 10^{15})t + \sin(12 \times 10^{15})t$ (in SI units) falls on a metal surface of work function $2.8 \text{ eV}$. The maximum kinetic energy of ejected photoelectron is (approximately) ______ $\text{eV}$. ($h = 6.6 \times 10^{-34} \text{ J-s.}$ and $e = 1.6 \times 10^{-19} \text{ C}$)
💡 View Verified Solution & Step Rubric
$\omega_1 = 3 \times 10^{15} \text{ rad/sec}$
$\omega_2 = 12 \times 10^{15} \text{ rad/sec}$
$\therefore \nu = \frac{\omega}{2\pi}$
$E_{\text{photon}} = h\nu = 6.6 \times 10^{-34} \times 1.91 \times 10^{15}$
$= 1.26 \times 10^{-18} \text{ J}$
$E_{\text{max}} = \frac{1.26 \times 10^{-18}}{1.6 \times 10^{-19}} \approx 7.9 \text{ eV}$
$K_{\text{max}} = E_{\text{max}} - \phi_0$
$= 7.9 - 2.8$
$K_{\text{max}} = 5.1 \text{ eV}$
Correct option (1)
JEE Main 2026 • Q9
A monochromatic source of light operating at $15\text{ kW}$ emits $2.5 \times 10^{22}\text{ photons/s}$. The region of an electromagnetic spectrum to which the emitted electromagnetic radiation belongs to _______. (Take $h = 6.6 \times 10^{-34}\text{ J.s}$ and $c = 3 \times 10^8\text{ m/s}$).
💡 View Verified Solution & Step Rubric
$$\frac{hC}{\lambda} = \frac{15 \times 10^3}{2.5 \times 10^{22}}$$
$$\therefore \lambda = \frac{6.6 \times 10^{-34} \times 3 \times 10^8 \times 2.5 \times 10^{22}}{15 \times 10^3}$$
$$\lambda = 3.3 \times 10^{-7}\text{ m} = 330\text{ nm}$$, which lies in the Ultraviolet region.
JEE Main 2026 • Q10
Light source having wavelength $331 \text{ nm}$ is used to generate photo-electrons whose stopping potential is $0.2\text{ V}$. The work function of the used metal in the experiment is $\alpha \times 10^{-19}\text{ J}$. The value of $\alpha$ is \underline{\hspace{1cm}}. ($h = 6.62 \times 10^{-34}\text{ J s}, e = 1.6 \times 10^{-19}\text{ C and } c = 3 \times 10^8\text{ m/s}$)
💡 View Verified Solution & Step Rubric
$V_s = \frac{1}{e}\left(\frac{hc}{\lambda} - \phi\right)$
$\phi = \frac{hc}{\lambda} - e V_s$
$= \left(\frac{6.62 \times 10^{-34} \times 3 \times 10^8}{331 \times 10^{-9}}\right) - (1.6 \times 10^{-19} \times 0.2)$
$= 5.68 \times 10^{-19}\text{ J}$
JEE Main 2026 • Q11
For a certain metal, when monochromatic light of wavelength $\lambda$ is incident, the stopping potential for photoelectrons is $3V_0$. When the same metal is illuminated by light of wavelength $2\lambda$, then the stopping potential becomes $V_0$. The threshold wavelength for photoelectric emission for the given metal is $\alpha\lambda$. The value of $\alpha$ is ______.
💡 View Verified Solution & Step Rubric
$\frac{hc}{\lambda} - \phi = 3eV_0 \dots\dots (i)$
$\frac{hc}{2\lambda} - \phi = eV_0 \dots\dots (ii)$
$\frac{hc}{\lambda} - \phi = 3\left[\frac{hc}{2\lambda} - \phi\right]$
$\phi = \frac{hc}{4\lambda}$
$\frac{hc}{\lambda_0} = \frac{hc}{4\lambda}$
$\lambda_0 = 4\lambda$
$\alpha = 4$
JEE Main 2026 • Q12
An electron is travelling with a velocity $v$ in free space and when it enters a medium, its velocity is reduced by $20\%$. The de Broglie wavelength of electron in the medium is $\alpha \lambda_0$, where $\lambda_0$ is its de Broglie wavelength in free space. The value of $\alpha$ is______
💡 View Verified Solution & Step Rubric
Solution steps not fully shown in image, but official answer is given as 3.
JEE Main 2026 • Q13
$K_1$ and $K_2$ be the maximum kinetic energies of photoelectrons emitted from a surface of a given material for the light of wavelength $\lambda_1$ and $\lambda_2$, respectively. If $\lambda_1 = 2\lambda_2$ then the work function of material is given by :
💡 View Verified Solution & Step Rubric
$2K_1 = \frac{2hC}{\lambda_1} - 2\phi \quad \text{--- (i)}
K_2 = \frac{2hC}{\lambda_1} - \phi \quad \text{--- (ii)}
\text{Solving (i) & (ii), we get}
K_2 - 2K_1 = \phi$
JEE Main 2026 • Q14
Light is incident on a metallic plate having work function $110 \times 10^{-20}\text{ J}$. If the produced photoelectrons have zero kinetic energy then the angular frequency of the incident light is $\rule{2cm}{0.15mm}\text{ rad/s}$. ($h = 6.63 \times 10^{-34}\text{ J}\cdot\text{s}$)
💡 View Verified Solution & Step Rubric
$\phi = h\nu$
$\nu = \frac{\phi}{h}$
$\omega = 2\pi\nu = \frac{2\pi\phi}{h} = \frac{2 \times 3.14 \times 110 \times 10^{-20}}{6.63 \times 10^{-34}}$
$\omega = 1.04 \times 10^{16}\text{ rad/sec}$
JEE Main 2026 • Q15
The ratio of de Broglie wavelength of a deuteron with kinetic energy $E$ to that of an alpha particle with kinetic energy $2E$, is $n : 1$. The value of $n$ is ________.\n(Assume mass of proton = mass of neutron) :
💡 View Verified Solution & Step Rubric
$\lambda = \frac{h}{mv} = \frac{h}{\sqrt{2m \cdot \mathrm{KE}}}$\n$\frac{\lambda_d}{\lambda_\alpha} = \sqrt{\frac{m_\alpha \cdot \mathrm{KE}_\alpha}{m_d \cdot \mathrm{KE}_d}} = \sqrt{\frac{4m \cdot 2E}{2m \cdot E}} = 2:1$
JEE Main 2026 • Q16
The work functions of two metals ($\text{M}_A$ and $\text{M}_B$) are in the $1 : 2$ ratio. When these metals are exposed to photons of energy $6\text{ eV}$, the kinetic energy of liberated electrons of $\text{M}_A : \text{M}_B$ is in the ratio of $2.642 : 1$. The work functions (in $\text{eV}$) of $\text{M}_A$ and $\text{M}_B$ are respectively.
💡 View Verified Solution & Step Rubric
Einstein's photoelectric equation is given by $\text{KE}_{\text{max}} = E - \phi$.
For metal A: $(\text{KE}_{\text{max}})_1 = 6 - \phi_1 \quad \dots\dots \text{(1)}$
For metal B: $(\text{KE}_{\text{max}})_2 = 6 - \phi_2 \quad \dots\dots \text{(2)}$
Given $\phi_2 = 2\phi_1$ and $\frac{(\text{KE}_{\text{max}})_1}{(\text{KE}_{\text{max}})_2} = \frac{2.642}{1}$.
Dividing eq. (1) by eq. (2):
$$\frac{2.642}{1} = \frac{6 - \phi_1}{6 - 2\phi_1}$$
Solving for $\phi_1$:
$$\phi_1 = 2.3\text{ eV}$$
$$\phi_2 = 4.6\text{ eV}$$
JEE Main 2025 • Q17
In an experiment with photoelectric effect, the stopping potential.
💡 View Verified Solution & Step Rubric
$$\frac{hC}{\lambda} = W + eV_S$$
$$\frac{hC}{\lambda} = W + (K_{\max})$$
$$\therefore V_S = \frac{K_{\max}}{e}$$
Ans. (3)
JEE Main 2025 • Q18
In photoelectric effect an em-wave is incident on a metal surface and electrons are ejected from the surface. If the work function of the metal is $2.14\text{ eV}$ and stopping potential is $2\text{V}$, what is the wavelength of the em-wave?
(Given $hc = 1242\text{ eVnm}$ where $h$ is the Planck's constant and $c$ is the speed of light in vaccum.)
💡 View Verified Solution & Step Rubric
$eV_s = E - \phi$
$2\text{ eV} = E - 2.14\text{ eV}$
$E = 4.14\text{ eV}$
$E = \frac{hc}{\lambda}$
$\lambda = \frac{1242}{4.14} = 300\text{ nm}$
JEE Main 2025 • Q19
An electron in the ground state of the hydrogen atom has the orbital radius of $5.3 \times 10^{-11}\text{ m}$ while that for the electron in third excited state is $8.48 \times 10^{-10}\text{ m}$. The ratio of the de Broglie wavelengths of electron in the ground state to that in excited state is
💡 View Verified Solution & Step Rubric
For ground state ($n_1 = 1$), radius $r_1 = 5.3 \times 10^{-11}\text{ m}$. For third excited state ($n_2 = 4$), radius $r_2 = 8.48 \times 10^{-10}\text{ m}$. The de Broglie wavelength is given by $\lambda = \frac{h}{p} = \frac{h}{mv}$. For Bohr orbit, $2\pi r = n\lambda \Rightarrow \lambda = \frac{2\pi r}{n}$. Thus, $\frac{\lambda_1}{\lambda_2} = \frac{r_1/n_1}{r_2/n_2} = \frac{5.3 \times 10^{-11}/1}{8.48 \times 10^{-10}/4} = \frac{5.3 \times 10^{-11}}{2.12 \times 10^{-10}} = 4$.
JEE Main 2025 • Q20
A light source of wavelength $\lambda$ illuminates a metal surface and electrons are ejected with maximum kinetic energy of $2\text{ eV}$. If the same surface is illuminated by a light source of wavelength $\frac{\lambda}{2}$, then the maximum kinetic energy of ejected electrons will be (The work function of metal is $1\text{ eV}$)
💡 View Verified Solution & Step Rubric
$$\frac{hc}{\lambda} = \phi + \text{eV} \Rightarrow \frac{hc}{\lambda} = 1 + 2 = 3\text{ eV} \dots\dots(1)$$
$$\frac{hc}{\lambda/2} = 6 = 1 + k_{\max} \therefore k_{\max} = 5\text{ eV}$$
JEE Main 2025 • Q21
Given below are two statements: one is labelled as Assertion A and the other is labelled as Reason R
Assertion A: In photoelectric effect, on increasing the intensity of incident light the stopping potential increases.
Reason R : Increase in intensity of light increases the rate of photoelectrons emitted, provided the frequency of incident light is greater than threshold frequency.
In the light of the above statements, choose the correct answer from the options given below
💡 View Verified Solution & Step Rubric
$V_s = \frac{h\nu - \phi}{e}$
so stopping potential doesn't depend on Intensity.
$I = \frac{\eta h\nu}{A}$
On increasing intensity no. of photons per sec. $n$ increases so the no. of electrons.
JEE Main 2025 • Q22
In photoelectric effect, the stopping potential ($V_0$) v/s frequency ($\nu$) curve is plotted.
(h is the Planck's constant and $\phi_0$ is work function of metal)
(A) $V_0$ v/s $\nu$ is linear
(B) The slope of $V_0$ v/s $\nu$ curve = $\frac{\phi_0}{h}$
(C) $h$ constant is related to the slope of $V_0$ v/s $\nu$ line
(D) The value of electric charge of electron is not required to determine $h$ using the $V_0$ v/s $\nu$ curve.
(E) The work function can be estimated without knowing the value of $h$.
Choose the correct answer from the options given below :
💡 View Verified Solution & Step Rubric
$h\nu = \phi + \text{KE}_{max}$
$\text{KE}_{max} = eV_0$
$V_0 = \frac{h\nu - \phi}{e}$
(A) $V_0$ v/s $V$ is linear: Correct
(B) Slope = $\frac{h}{e}$, hence (B) is wrong
(C) Correct
(D) Incorrect
(E) Correct
JEE Main 2025 • Q23
The work function of a metal is $3\text{ eV}$. The color of the visible light that is required to cause emission of photoelectrons is
💡 View Verified Solution & Step Rubric
$(\text{KE})_{\max} = \frac{hc}{\lambda} - \phi$, $\frac{hc}{\lambda} > \phi$ [for emission], $\lambda < \frac{hc}{\phi} \Rightarrow \lambda < \frac{1242}{3}\text{ nm}$. So blue light option (B).
JEE Main 2025 • Q24
An electron of mass '$m$' with an initial velocity $\vec{v} = v_0\hat{i} \,(v_0 > 0)$ enters an electric field $\vec{E} = -E_0\hat{k}$. If the initial de Broglie wavelength is $\lambda_0$, the value after time $t$ would be :-
💡 View Verified Solution & Step Rubric
$\vec{v} = v_0\hat{i} - \frac{E_0e}{m}t\hat{k}$
$|\vec{v}| = \sqrt{v_0^2 + \frac{E_0^2e^2t^2}{m^2}}$
$\lambda_0 = \frac{h}{mv_0}$
$\lambda' = \frac{h}{mv_0\sqrt{1 + \frac{E_0^2e^2t^2}{v_0^2m^2}}}$
$\lambda' = \frac{\lambda_0}{\sqrt{1 + \frac{E_0^2e^2t^2}{v_0^2m^2}}}$
JEE Main 2025 • Q25
A proton of mass '$m_p$' has same energy as that of a photon of wavelength '$\lambda$'. If the proton is moving at non-relativistic speed, then ratio of its de Broglie wavelength to the wavelength of photon is.
💡 View Verified Solution & Step Rubric
$E_{\text{photon}} = \frac{hc}{\lambda} = E$; $E_{\text{proton}} = \frac{1}{2}m_p v^2 = E$
$\frac{\lambda_{\text{proton}}}{\lambda_{\text{photon}}} = \frac{h/p}{hc/E} = \frac{h/\sqrt{2m_p E}}{hc/E} = \frac{E}{c\sqrt{2m_p E}} = \frac{1}{c}\sqrt{\frac{E}{2m_p}}$
JEE Main 2025 • Q26
An electron in the hydrogen atom initially in the fourth excited state makes a transition to $n^{\text{th}}$ energy state by emitting a photon of energy $2.86\text{ eV}$. The integer value of $n$ will be ______.
💡 View Verified Solution & Step Rubric
Fourth excited state means $n_2 = 5$ ($n=0$ is ground state, 1st excited is $n=2$, 2nd is $n=3$, 3rd is $n=4$, 4th excited is $n=5$).
$$E = 13.6 \left(\frac{1}{n^2} - \frac{1}{n_2^2}\right)$$
$$2.86 = 13.6 \left(\frac{1}{n^2} - \frac{1}{5^2}\right)$$
$$\frac{1}{n^2} = 0.21 + \frac{1}{2.5}$$
$$n^2 = 4 \implies n = 2$$
JEE Main 2024 • Q27
Which of the following statement is not true about stopping potential (V0)?
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (3)
KEmax = hν – φ0 = eV
JEE Main 2024 • Q28
For the photoelectric effect, the maximum kinetic energy (Ek) of the photoelectrons is plotted against the frequency (v) of the incident photons as shown in figure. The slope of the graph gives Ek v θ
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (4)
K.E. = hf – φ
tan θ = h
JEE Main 2024 • Q29
Given below are two statements: V0 v M1 M2
Statement-I: Figure shows the variation of
stopping potential with frequency (ν) for the two photosensitive materials M1 and M2. The slope gives value of h e , where h is Planck's constant, e is the charge of electron.
Statement-II: M2 will emit photoelectrons of
greater kinetic energy for the incident radiation having same frequency.
In the light of the above statements, choose the most appropriate answer from the options given below.
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (1)
Key Derivation Steps:
M2 material has higher work function, so statement-(II) is incorrect. Option (1) is correct.
Result: =
JEE Main 2024 • Q30
The work function of a substance is 3.0 eV. The longest wavelength of light that can cause the emission of photoelectrons from this substance is approximately:
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (2)
Key Derivation Steps:
For P.E.E. : 413.33nm 414nm for P.E.E.
JEE Main 2024 • Q31
The de Broglie wavelengths of a proton and an α particle are λ and 2 λ respectively. The ratio of the velocities of proton and α particle will be :
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (4)
Key Derivation Steps:
λ = h ⇒ v = h = 4 × 2 = 8
JEE Main 2024 • Q32
In a photoelectric effect experiment a light of frequency 1.5 times the threshold frequency is made to fall on the surface of photosensitive material. Now if the frequency is halved and intensity is doubled, the number of photo electrons emitted will be:
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (3)
Key Derivation Steps:
Since i.e. the incident frequency is less than threshold frequency. Hence there will be no emission of photoelectrons. current
Result: =
JEE Main 2024 • Q33
When UV light of wavelength 300 nm is incident on the metal surface having work function 2.13 eV, electron emission takes place. The stopping potential is : (Given hc = 1240 eV nm)
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (3)
Key Derivation Steps:
⇒ 1240 300 eV – 2.13 eV = eVs ⇒ 4.13 eV – 2.13 eV = eVs. ⇒ So, 2volt
JEE Main 2024 • Q34
The de-Broglie wavelength of an electron is the same as that of a photon. If velocity of electron is 25% of the velocity of light, then the ratio of K.E. of electron and K.E. of photon will be:
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (2)
Key Derivation Steps:
For photon For electron Given ve = 0.25 c 0.25c Also
JEE Main 2024 • Q35
The threshold frequency of a metal with work function 6.63 eV is :
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (4)
Key Derivation Steps:
Result: =
JEE Main 2024 • Q36
UV light of 4.13 eV is incident on a photosensitive metal surface having work function 3.13 eV. The maximum kinetic energy of ejected photoelectrons will be :
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (2)
Ephoton = (work function) + K.Emax
. = . + K.Emax
K.Emax = 1 eV
JEE Main 2024 • Q37
A proton and an electron have the same de Broglie wavelength. If Kp and Ke be the kinetic energies of proton and electron respectively. Then choose the correct relation :
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (4)
Key Derivation Steps:
De Broglie wavelength of proton & electron = λ Θ λ = h pproton = pelectron Θ KE = KEproton < KEelectron
JEE Main 2024 • Q38
In photoelectric experiment energy of 2.48 eV irradiates a photo sensitive material. The stopping potential was measured to be 0.5 V. Work function of the photo sensitive material is :
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (4)
eVs = hν – φ
0.5 V = 2.48 – φ
work function (φ) = 2.48 V – 0.5 V = 1.98 V
SECTION-B
JEE Main 2024 • Q39
When a metal surface is illuminated by light of wavelength λ, the stopping potential is 8V. When the same surface is illuminated by light of wavelength 3λ, stopping potential is 2V. The threshold wavelength for this surface is :
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (3)
Key Derivation Steps:
8e = ......(i) .......(ii) on solving (i) & (ii) SECTION-B
Result: λ=λ
JEE Main 2024 • Q40
When a hydrogen atom going from n = 2 to n = 1 emits a photon, its recoil speed is x 5 m/s. Where x = ______ . (Use : mass of hydrogen atom = 1.6 × 10 –27 kg)
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (17)
–3.4 eV –13.6 eV n = 2 n = 1
ΔE = 10.2 eV
Recoil speed(v) = E mc Δ
= –27 8
10.2eV
1.6 10
3 10
–19 –27 8
10.2 1.6 10
1.6 10
3 10
=
v = 3.4 m/s = 17 5 m/s
Therefore, x = 17
<<
>>
JEE Main 2023 • Q41
If the two metals 𝐴 and 𝐵 are exposed to radiation of wavelength 350 nm. The work functions of
metals A and B are 4.8eV and 2.2eV. Then choose the correct option.
💡 View Verified Solution & Step Rubric
If E > , photo electrons will emit.
A will not emit and B will emit.
JEE Main 2023 • Q42
A photon is emitted from n = 4 to n = 1 level in hydrogen atom the corresponding wavelength for
this transfer will be [hc = 1240 nm eV].
💡 View Verified Solution & Step Rubric
Sol.
E = hc
l =
4 1
hc
1240nm eV
E
12.75 eV
= 97.3 nm
<<
>>
JEE Main 2023 • Q43
A proton moving with one tenth of velocity of light has a certain de Broglie wavelength of 𝜆. An alpha
particle having certain kinetic energy has the same de-Brogle wavelength 𝜆. The ratio of kinetic energy
of proton and that of alpha particle is:
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
JEE Main 2023 • Q44
The threshold frequency of a metal is f0. When the light of frequency 2f0 is incident on the metal plate,
the maximum velocity of photoelectrons is 𝑣1. When the frequency of incident radiation is increased
to 5f0, the maximum velocity of photoelectrons emitted is 𝑣2. The ratio of 𝑣1 to 𝑣2 is:
💡 View Verified Solution & Step Rubric
Using photoelectric equation
0
0
hf
hf
eV
As per question
0
0
1
h(2f )
h(f )
eV
0
0
1
h(2f
f )
eV
0
1
hf
eV
…(1)
0
0
2
h(5f )
hf
eV
0
0
2
h(5f
f )
eV
0
2
4hf
eV
…(2)
Equation 2
1
0
2
0
1
4hf
eV
hf
eV
2
1
V
4
V
As we know
2
max
max
1
KE
eV
mv
2
max
v
V
2
2
1
1
v
V
4
2
v
V
1
2
v
1
v
2
JEE Main 2023 • Q45
Match the column.
Column-I
Column-II
(a)
h (Planck's constant)
(P)
[M1L1T–1]
(b)
P (momentum)
(Q)
[M1L2T–3]
(c)
V (stopping potential)
(R)
[M1L2T–2]
(d)
(work function)
(S)
[M1L2T–3A–1]
Choose the correct option
💡 View Verified Solution & Step Rubric
<<
>>
Sol.
h(Planck's constant)
(a)
E = h
2
2
1
2
1
1
[ML T ]
h
[M L T ]
h
[T ]
(b)
P(momentum)
P = mv = [m][LT–1] = [MLT–1]
(c)
Vs (stopping potential)
Vs = Ed = Fd
q =
1 1
2
[M LT ][L]
[AT]
= [M1L2T–3A–1]
(d)
Work function ()
= Energy
= [M1L2T–2]
JEE Main 2023 • Q46
Choose the correct option based on the following statements
(a) Photoelectric effect is explained by wave theory
(b) Stopping potential may depend on work function
(c) If intensity of light increases then photoelectric current also increases
(d) If intensity of light increases then maximum kinetic energy of photoelectrons increases.
(1) (a, d)
(2) (a, c)
(3) c
(2) (b, c, d)
Ans
(3)
Basic Theory
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
JEE Main 2022 • Q47
A parallel beam of light of wavelength 900 nm
and intensity 100 Wm-2 is incident on a surface
perpendicular to the beam. Tire number of
photons crossing 1 cm2 area perpendicular to
the beam in one second is :
💡 View Verified Solution & Step Rubric
)
Sol.
Wavelength of incident beam
9
900 10
m
Intensity of incident beam =I W/m2
No. of photons crossing per unit sec
net
single photon
E
IA
n
E
hc
4
9
16
34
8
100 1 10
900 10
4.5 10
6.62 10
3 10
JEE Main 2022 • Q48
The electric field at the point associated with a
light wave is given by
E = 200 [sin(6 × 10
15) t + sin(9 × 10
15) t] Vm
–1
Given : h = 4.14 × 10
–15 eVs
If this light falls on a metal surface having a work
function of 2.50 eV, the maximum kinetic energy
of the photoelectrons will be :
💡 View Verified Solution & Step Rubric
Sol. For maximum KE we will take
higher frequency §
·
u
¨
¸
S
©
¹
15
9 10
f
Hz
2
Kmax = hf – I
=
u
u
u
S
15
15
9 10
4.14 10
2.50
2
3.43 eV
nearest is 3.42 eV
JEE Main 2022 • Q49
Given below are two statements : one is labelled as
Assertion A and the other is labelled as Reason R.
Assertion A : The photoelectric effect does not
take place, if the energy of the incident radiation is
less than the work function of a metal.
Reason R : Kinetic energy of the photoelectrons is
zero, if the energy of the incident radiation is equal
to the work function of a metal.
In the light of the above statements, choose the
most appropriate answer from the options given
below.
💡 View Verified Solution & Step Rubric
Sol. To free the electron from metal surface minimum
energy required, is equal to the work function of
that metal.
So Assertion A, is correct.
hv = w0 + K. E.max
if hv = w0
K.E.max = 0
Hence reason R, is correct, But R is not the correct
explanation of A.
JEE Main 2022 • Q50
A nucleus of mass M at rest splits into two parts
having masses M'
3 and
2M' M'
M
3
. The ratio
of de Broglie wavelength of two parts will be :
💡 View Verified Solution & Step Rubric
Sol.
1
2
P
P
Here P is momentum
So
h
P
Hence both will have same de broglie wavelength.
JEE Main 2022 • Q51
A proton, a neutron, an electron and an -particle
have same energy. If
p
n
e
,
,
and
are the de
Broglie’s wavelengths of proton, neutron, electron
and particle respectively, then choose the correct
relation from the following :
💡 View Verified Solution & Step Rubric
Sol.
h
2Em
1
m
e
p
n
<<
>>
6
JEE Main 2022 • Q52
When light of a given wavelength is incident on a metallic surface, the minimum potential
needed to stop the emitted photoelectrons is 6.0 V. This potential drops to 0.6 V if another source
with wavelength four times that of the first one and intensity half of the first one is used.
What are the wavelength of the first source and the work function of the metal, respectively?
[Take =
6
1
1.24 10
hc
Jm C
e
-
-
=
´
.]
💡 View Verified Solution & Step Rubric
Sol. hc
6
= f +
l
… (i)
hc
0.6
4
= f +
l
… (ii)
3hc
5.4eV
4
=
l
\ f = 1.2 eV
24
8
7
19
3
6.63 10
3 10
1.72 10 m
4
5.4 1.6 10
-
-
-
´
´ ´
Þ
´
= l =
´
´
´
JEE Main 2022 • Q53
A metal exposed to light of wavelength 800 nm
and emits photoelectrons with a certain kinetic
energy.
The
maximum
kinetic
energy
of
photo-electron doubles when light of wavelength
500 nm is used. The work function of the metal is
(Take hc = 1230 eV-nm).
💡 View Verified Solution & Step Rubric
Sol.
1
1230
k
800
…(1)
2
1
1230
k
2k
500
-
…(2)
Eliminating k1 from (1) and (2) we get
1230
1230
0
500
400
0.615eV
JEE Main 2022 • Q54
Two streams of photons, possessing energies to
five and ten times the work function of metal are
incident on the metal surface successively. The
ratio
of
the
maximum
velocities
of
the
photoelectron
emitted,
in
the
two
cases
respectively, will be
💡 View Verified Solution & Step Rubric
Sol.
2
1
1 mv
4
2
2
2
1 mv
9
2
1
2
v
2
v
3
JEE Main 2022 • Q55
Find the ratio of energies of photons produced due
to transition of an election of hydrogen atom from
its(i) second permitted energy level to the first
level, and (ii) the highest permitted energy level to
the first permitted level.
💡 View Verified Solution & Step Rubric
Sol.
n
2
13.6
E
ev
n
2
1
1
1
13.6(1
)
E
E
3
4
E
E
13.6
4
JEE Main 2022 • Q56
The light of two different frequencies whose
photons have energies 3.8 eV and 1.4 eV
respectively, illuminate a metallic surface whose
work function is 0.6 eV successively. The ratio of
maximum speeds of emitted electrons for the two
frequencies respectivly will be :
💡 View Verified Solution & Step Rubric
Sol.
3.8
0.6
3.2
2
1.4
0.6
0.8
-
=
=
-
JEE Main 2022 • Q57
x
x
4
+
is the ratio of energies of photons
produced due to transition of an electron of
hydrogen atom from its
(i) third permitted energy level to the second
level and
(ii) the highest permitted energy level to the
second permitted level.
The value of x will be
💡 View Verified Solution & Step Rubric
Sol.
2
2
2
1
1
13.6
x
2
3
1
x
4
13.6
0
2
æ
ö
-
ç
÷
è
ø =
+
æ
ö
-
ç
÷
è
ø
;
1
1
x
4
9
1
x
4
4
-
=
+
5
x
9
x
4
=
+
5x + 20 = 9x
4x = 20
x = 5
JEE Main 2022 • Q58
The stopping potential for photoelectrons emitted
from a surface illuminated by light of wavelength
6630 Å is 0.42 V. If the threshold frequency is x ×
1013/s, where x is ______ (nearest integer).
(Given, speed light = 3 × 108 m/s, Planck’s
constant = 6.63 × 10–34 Js)
💡 View Verified Solution & Step Rubric
5)
Sol. Stopping potential V0 = 0.42 V
= 6630 Å
E = + eV0
E : energy of incident photon
V0 : Stopping potential
= E – eV0
= (1.87 – 0.42) = 1.45 eV
= hv0 ; v0 : threshold frequency
1.45 × 1.6 × 10–19 = 6.63 × 10–34 × v0
v0 = 0.35 × 1015
= 35 × 1013 sec–1
= 35
0 1 2
1
2
I I , I
I
5A
2 d
5A
d
5A
2
0 1 2
I I
10 10
2 d
7
5
2
2 10
5 5
10
10 10
d
7
4
3
r
tanC
h
1
3
sinC
4
3
tanC
7
3
r
7
3
7
49
1VSD
MSD
50
49
1
1
MSD
MSD
50
50
1
1MSD
cm
40
1
Least count =
cm
50
40
5
1
1
cm=
10 m
2000
2
12400
E
eV
1.87 eV
6630
<<
>>
1
FINAL JEE–MAIN EXAMINATION – JUNE, 2022
(Held On Sunday 26th June, 2022)
TIME : 3 : 00 PM to 6 : 00 PM
CHEMISTRY
TEST PAPER WITH SOLUTION
SECTION-A
JEE Main 2021 • Q59
Find the ratio of de Broglie wavelength of an electron and a proton having same
Kinetic Energy. Given that the mass of electron is me and proton is mp.
💡 View Verified Solution & Step Rubric
de Broglie wavelength
2
h
mk
for electron,
2
e
e
h
m k
…(i)
for proton,
2
p
p
h
m k
…(ii)
from equation (i) and (ii)
p
e
p
e
m
m
JEE Main 2021 • Q60
An X-ray tube is operated at 1.24 million volt. The shortest wavelength of the produced photon
will be :
💡 View Verified Solution & Step Rubric
Sol.
min
hc
eV
min
6
1240nm
eV
1.24
10
3
min
10
nm
JEE Main 2021 • Q61
When a metal is illuminated by light of wavelengthλ ,the stopping potential is
0
V
and for wavelength2λ , it is
0
3V . Then the threshold wavelength is?
💡 View Verified Solution & Step Rubric
( )
0
... 1
hc
eV
φ
λ
=
−
<<
>>
( )
0
3
... 2
2
hc
eV
φ
λ
=
−
Multiply by 3 in equation (1)
( )
3
3
3 ... 3
hc
eV
φ
λ
=
−
Equation (3) – (2)
3
2
0
2
hc
hc
φ
λ
λ
−
−
=
0
5
2
2
2
hc
hc
φ
λ
λ
=
=
0
5
4
hc
hc
λ
λ
=
0
4
5
λ
λ =
JEE Main 2021 • Q62
The wavelength of the photon emitted by a hydrogen atom when an electron makes a transition
from n = 2 to n = 1 state is:
💡 View Verified Solution & Step Rubric
E = 10.2 eV
hc
= 10.2 ev
hc
10.2 e
= 12400 Å
10.2
= 121.56 nm
121.8 nm
<<
>>
JEE Main 2021 • Q63
A free electron of 2.6 eV energy collides with a
H+ ion. This results in the formation of a hydrogen
atom in the first excited state and a photon is
released. Find the frequency of the emitted photon.
(h = 6.6 × 10–34 Js)
💡 View Verified Solution & Step Rubric
Sol. For every large distance P.E. = 0
& total energy = 2.6 + 0 = 2.6 eV
Finally in first excited state of H atom total energy
= –3.4 eV
Loss in total energy = 2.6 – (–3.4)
= 6eV
It is emitted as photon
1240
206 nm
6
8
9
3 10
f
206 10
= 1.45 × 1015 Hz
= 1.45 × 109 Hz
JEE Main 2021 • Q64
The stopping potential for electrons emitted from a photosensitive surface illuminated by light of
wavelength 491 nm is 0.710 V. When the incident wavelength is changed to a new value, the
stopping potential is 1.43V. The new wavelength is:
💡 View Verified Solution & Step Rubric
From the photoelectric effect equation
hc
= + evs
so
1
s
ev
=
1
hc
……(i)
2
s
ev
=
2
hc
…..(ii)
Subtract equation (i) from equation (ii)
1
s
ev
–
2
s
ev
=
1
2
hc
hc
1
s
v
–
2
s
v
=
1
2
hc
1
1
e
(0.710 – 1.43) = 1240
2
1
1
491
2
0.72
1
1
1240
491
2
1
1
0.72
491
1240
2
1
= 0.00203 + 0.00058
<<
>>
2
1
= 0.00261
2 = 383.14
2 382nm
JEE Main 2021 • Q65
An electron of mass me and a proton of mass mp = 1836 me are moving with the same speed.
The ratio of their de Broglie wavelength
electron
Proton
will be:
💡 View Verified Solution & Step Rubric
Given mass of electron = me
Mass of proton = mp
given mp = 1836 me
From de-Broglie wavelength
= h
h
p
mv
p
e
p
e
m
m
=
e
e
1836m
m
e
p
1836
JEE Main 2021 • Q66
In a photoelectric experiment ultraviolet light of
wavelength 280 nm is used with lithium cathode
having work function = 2.5 eV. If the wavelength
of incident light is switched to 400 nm, find out the
change in the stopping potential. (h = 6.63 × 10–34 Js,
c = 3 × 108 ms–1)
💡 View Verified Solution & Step Rubric
Sol.
max
S
hc
KE
eV
S
1240
eV
2.5
1.93eV
280
1
S
V
1.93V
… (i)
2
S
1240
eV
2.5
0.6eV
400
2
S
V
0.6V
… (ii)
1
2
S
S
V
V
V
1.93
0.6
1.33V
Option (1)
<<
>>
4
JEE Main 2021 • Q67
The recoil speed of a hydrogen atom after it emits a photon in going from n = 5 state to n = 1
state will be:
💡 View Verified Solution & Step Rubric
n=5
–0.54eV
+
n=1 n=2 n=3 n=4
–13.6eV
f
Eye
<<
>>
momentum (P) =
E
C
8
(13.6
0.54)eV
3
10
mv =
19
8
(13.06)
1.6
10
3
10
v =
19
8
27
(13.06)
1.6
10
3
10
1.67
10
4.17 m/sec
JEE Main 2021 • Q68
In a photoelectric experiment, increasing the
intensity of incident light :
💡 View Verified Solution & Step Rubric
Sol. Increasing intensity means number of incident
photons are increased.
Kinetic energy of ejected electrons depend on the
frequency of incident photons, not the intensity.
<<
>>
4
JEE Main 2021 • Q69
A body of mass emits a photon of frequency ‘v’, then loss in its internal energy is
💡 View Verified Solution & Step Rubric
K.E. of body
2
2
2
2
1
1
2
2
2
E
E
mv
m
c
m
mc
=
=
=
Energy emitted by photon = E
Total decrease in internal energy
2
2
2
E
E
mc
=
+
2
1
2
E
E
mc
=
+
2
1
(
)
2
hv
hv
asE
hv
mc
=
+
=
JEE Main 2021 • Q70
The de Broglie wavelength of a proton and-particle are equal. The ratio of their velocities is :
💡 View Verified Solution & Step Rubric
Sol.
From De-broglie’s wavelength :-
h
mv
Given
P
1
v
m
p
p
p
p
v
4m
m
v
m
m
4
1
JEE Main 2021 • Q71
A nucleus of mass 4 m disintegrates into two daughter nuclei of mass m and 3 m.
Find the ratio of their respective De Broglie wavelength?
💡 View Verified Solution & Step Rubric
0
i
f
P
P
=
=
1
2
0
P
P
=
−
1
2
P
P
=
1
1
h
h
P
P
λ
λ
=
⇒
=
2
2
h
P
λ =
1
2
1
1:1
1
λ
λ =
=
JEE Main 2021 • Q72
The stopping potential in the context of
photoelectric effect depends on the following
property
of
incident
electromagnetic
radiation :
💡 View Verified Solution & Step Rubric
Sol.
Stopping potential changes linearly with
frequency of incident radiation.
JEE Main 2021 • Q73
Two stream of photons, possessing energies equal to twice and ten times the work function of
metal are incident on the metal surface successively. The value of ratio of maximum velocities
of the photoelectrons emitted in the two respective cases is x : y. The value of x is ________.
💡 View Verified Solution & Step Rubric
Forphotoelectric effectk.Emax = E –
E1 = 2,
k1 =
E2 = 10,
k2 = 9
2
1
2
V
k
k
mv
1
2
1
1
9
3
v
x
v
y
x = 1
JEE Main 2021 • Q74
The wavelength of an X-ray beam is 10 Å. The mass of a fictitious particle having the same
energy as that of the X – ray photons is x
3 h kg. The value of x is _______.
💡 View Verified Solution & Step Rubric
0
Given wavelength of an x-ray beam = 10Å
2
hc
E
mc
m = h
c
The mass of a fictitious particle having the same energy as that of the x-ray photons = x hkg
3
x h
3
= h
c
x = 3
c
=
8
10
3
3
10
10
10
x = 10
<<
>>
JEE Main 2020 • Q75
Two photons of energy 4 𝑒𝑉 and 4.5 𝑒𝑉 are incident on two metals 𝐴 and 𝐵 respectively.
The maximum kinetic energy for an ejected electron is 𝑇𝐴 for 𝐴, and 𝑇𝐵 = 𝑇𝐴 −1.5 𝑒𝑉 for
the metal 𝐵. The relation between the de-Broglie wavelengths of the ejected electron
of 𝐴 and 𝐵 are 𝜆𝐵= 2𝜆𝐵. The work function of the metal 𝐵 is
a. 3 𝑒𝑉
b. 1.5 𝑒𝑉
c. 4.5 𝑒𝑉
d. 4 𝑒𝑉
Solution: (d)
λ =
h
√2(KE)mB
= λ ∝
1
√KE
8th Jan (Shift 1, Physics)
Page | 7
λA
λB
= √KEB
√KEA
1
2 = √𝑇𝐴 −1.5
𝑇𝐴
𝑇𝐴 = 2 𝑒𝑉
KEB = 2 −1.5 = 0.5 𝑒𝑉
∅B = 4.5 −0.5 = 4 𝑒𝑉
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
JEE Main 2020 • Q76
When the wavelength of radiation falling on a metal is changed from 500 nm to 200 nm, the
maximum kinetic energy of the photoelectrons becomes three times larger. The work function of
the metal is close to :
💡 View Verified Solution & Step Rubric
max
1
hc
KE
max
2
hc
3KE
1
2
hc
hc
3
1
2
3hc
hc
2
3
1240
1240
2
500
200
0.6
JEE Main 2020 • Q77
An electron and a photon have same energy E. Find the de Broglie wavelength of
electron to wavelength of photon. (Given mass of electron is 𝑚 and speed of light is 𝑐)
a.
2
𝐶(
𝐸
2𝑚)
1
2
b.
1
𝐶(
𝐸
2𝑚)
1
3
c.
1
𝐶(
𝐸
𝑚)
1
2
d.
1
𝐶(
𝐸
2𝑚)
1
2
Solution:
(d)
𝜆𝑑 for electron =
ℎ
√2𝑚𝐸
𝜆 for photon =
ℎ𝐶
𝐸
Ratio =
ℎ
√2𝑚𝐸
𝐸
ℎ𝐶=
1
𝐶√
𝐸
2𝑚
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
JEE Main 2020 • Q78
When radiation of wavelength is used to illuminate a metallic surface, the stopping potential is V.
When the same surface is illuminated with radiation of wavelength 3, the stopping potential is V
4 .
If the threshold wavelength for the metallic surface is n then value of n will be __________.
Sol.
(9)
hc
eV
...(1)
hc
eV
3
4
...(2)
eq.(1)
eq.(2)
eV
3
eV
4
3eV
3
eV
4
eV
2
4
eV
8
hc
eV
eV
8
9 eV
8
8 hc
eV
9
so
hc
8 hc
9
1 hc
9
th
hc
hc
9
th = 9
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
JEE Main 2020 • Q79
In a photoelectric effect experiment, the graph of stopping potential V versus reciprocal of wavelength
obtained is shown in the figure. As the intensity of incident radiation is increased:
1/
V
💡 View Verified Solution & Step Rubric
ev = h –w (w = work function)
h
w
v
e
e
as h
w
&
e
e constant
Therefore no change in graph.
JEE Main 2020 • Q80
The surface of a metal is illuminated alternately with photons of energies E1 = 4 eV and
E2 = 2.5 eV respectively. The ratio of maximum speeds of the photoelectrons emitted in the two
cases is 2. The work function of the metal in (eV) is _________.
💡 View Verified Solution & Step Rubric
2
1
2
2
1 mV
2
1 mV
2
=
1
0
0
E
2.5
=
0
0
4
2.5
2
1
2
V
V
=
0
0
4
2.5
(2)2 =
0
0
4
2.5
10 – 40 = 4 – 0
30 = 10 – 4 = 6
0 = 2eV
JEE Main 2020 • Q81
A beam of electromagnetic radiation of intensity 6.4× 10−5 W/cm2 is comprised of wavelength, λ = 310 nm.
It falls normally on a metal (work function 2 eV ) of surface area 1 cm2. If one in 103 photons ejects an electron,
total number of electrons ejected in 1s is 10x (hc = 1240 eV −nm, 1 eV = 1.6 × 10−19 J), then the value of x
is
Solution:(11)
P = Intensity × Area
= 6.4 × 10−5W −cm−2 × 1 cm2
= 6.4 × 10−5 W
For photoelectric effect to take place, energy should be greater than work function
Now,
E = 1240
310 = 4 eV > 2 eV
Therefore, photoelectric effect takes place
Here n is the number of photons emitted.
n × E = I × A
=⇒n = IA
E = 6.4 × 10−5
6.4 × 10−19 = 1014
Where, n is number of incident photon
Since, 1 out of every 1000 photons are sucessfull in ejecting 1 photoelectron
7th Jan (Shift 1, Physics)
page: 16
Therefore, the number of photoelectrons emitted is
= 1014
103
∴x = 11
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
JEE Main 2020 • Q82
The metal mainly used in devising photoelectric cells is:
(1) Li
(2) Cs
(3) Rb
(4) Na
💡 View Verified Solution & Step Rubric
‘Cs’ is used in photoelectric cell as its ionisation energy is lowest
Hence Ans (2)
JEE Main 2020 • Q83
The work function of sodium metal is 4.41 × 10–19J. If photons of wavelength 300 nm are incident
on the metal, the kinetic energy of the ejected electrons will be (h = 6.63 × 10–34 J s; c = 3 × 108
m/s) __________ × 10–21 J.
Sol.
222
= 4.41 × 10–19 J
= 300 nm
KEmax = hc
–
=
–34
8
–9
6.63
10
3
10
300
10
–4.41× 10–19
= 6.63 × 10–19 – 4.41 × 10–19
= 222 × 10–21
💡 View Official Answer & Solution Status
Official Correct Option: (2)
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
JEE Main 2020 • Q84
The photoelectric current from Na (Work function, w0 = 2.3 eV) is stopped by the output voltage of
the cell Pt(s) H2(g, 1 Bar) HCl (aq. pH =1)
AgCl s Ag(s).
The pH of aq. HCl required to stop the photoelectric current form K(w0 = 2.25 eV), all other
conditions remaining the same, is _______ 10-2 (to the nearest integer).
Given,
0
AgCl AgCl
RT
2.303
0.06 V;E
0.22 V
F
Sol.
58
Energy of photon = 2.3 – Ecell {for Na}
Energy of photon = 2.25 – Ecell {for K}
Ecell {for ‘Na’} + 0.05 = Ecell {for ‘K’}
0.22 + 0.06 log [H+][Cl–] + 0.05 = 0.22 + 0.06 log [H+] [Cl–]
6 log (10–2) + 5 = 6 log [H+][Cl–]
log (10–12) + log (105) = log {[H+][Cl–]}6
{[H+][Cl–]}6 = 10–7
[H+]12 = 10–7
pH = 7
12 = 0.58
= 58 × 10–2
= 58 Ans
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
JEE Main 2019 • Q85
Two particles move at right angle to each other.
Their de Broglie wavelengths are 1 and 2
respectively. The particles suffer perfectly
inelastic collision. The de Broglie wavelength ,
of the final particle, is given by:
💡 View Verified Solution & Step Rubric
2
1
1
h
p
2
2
h
p
2
2
f
1
2
p
p
p
2
2
2
2
1
2
h
h
h
2
2
2
1
2
1
1
1
JEE Main 2019 • Q86
50 W/m2 energy density of sunlight is normally
incident on the surface of a solar panel. Some
part of incident energy (25%) is reflected from
the surface and the rest is absorbed. The force
exerted on 1 m2 surface area will be close to
(c = 3 × 108 m/s) :
💡 View Verified Solution & Step Rubric
Sol.
∵
W
P
c
and pressure = I/c
h
h
5h
P
4
4
for one photon
5
Nh
pressure
4
tA
But
2
Nhc
50 W/m
tA
5
50
pressure
4
c
Fn =
2
8
5 50 1m
20 10
N
4 c
<<
>>
JEE Main 2019 • Q87
In a photoelectric effect experiment the
threshold wavelength of light is 380 nm. If the
wavelength of incident light is 260 nm, the
maximum kinetic energy of emitted electrons
will be :
Given E (in eV) =
1237
(in nm)
💡 View Verified Solution & Step Rubric
Sol. Wavelength of incident wave () = 260 nm
Cut off (threshold) wavelength (0) = 380 nm
Then
max
0
hc
hc
KE
1
1
1237
260
380
1237
120
1.5 eV
380
260
JEE Main 2019 • Q88
When a certain photosensistive surface is
illuminated with monochromatic light of frequency
, the stopping potential for the photo current is –
V0/2. When the surface is illuminated by
monochromatic light of frequency /2, the stopping
potential is –V0. The threshold frequency for
photoelectric emission is:
💡 View Official Answer & Solution Status
Official Correct Option: (2)
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
JEE Main 2019 • Q89
If the deBronglie wavelenght of an electron is
equal to 10–3 times the wavelength of a photon
of frequency 6 × 1014 Hz, then the speed of
electron is equal to :
(Speed of light = 3 × 108 m/s
Planck's constant = 6.63 × 10–34 J.s
Mass of electron = 9.1 × 10–31 kg)
💡 View Verified Solution & Step Rubric
Sol.
8
3
14
h
3 10
10
mv
6 10
34
14
31
5
6.63 10
6 10
v
9.1 10
3 10
v = 1.45 × 106 m/s
JEE Main 2019 • Q90
A metal plate of area 1 × 10–4 m2 is illuminated
by a radiation of intensity 16 mW/m2.The work
function of the metal is 5eV. The energy of the
incident photons is 10 eV and only 10% of it
produces photo electrons. The number of
emitted photo electrons per second and their
maximum energy, respectively, will be :
[1 eV = 1.6 × 10–19J]
💡 View Verified Solution & Step Rubric
nE
I
At
19
3
12
4
Photon
n
10 1.6 10
16 10
10
t
10
JEE Main 2019 • Q91
An excited He+ ion emits two photons in
succession, with wavelengths 108.5 nm and
30.4 nm, in making a transition to ground
state. The quantum number n, corresponding
to its initial excited state is (for photon of
wavelength , energy
1240 eV
E
(in nm)
):
💡 View Verified Solution & Step Rubric
Sol.
2
0
n
2
E Z
E
–
n
Let it start from n to m and from m to ground.
Then
2
hc
1
13.6
4 1
30.4 nm
m
2
2
1
1
1
0.7498
0.25
m
m
m = 2, and now
9
2
hc
1
1
13.6
4 4
108.5
10
n
n 5.
JEE Main 2019 • Q92
The stopping potential V0 (in volt) as a function
of frequency () for a sodium emitter, is shown
in the figure. The work function of sodium,
from the data plotted in the figure, will be:
(Given: Planck’s constant)
(h) = 6.63 × 10–34 Js, electron
charge e = 1.6 × 10–19 C)
3.0
2.0
1.0
2
4
6
8
10
V0
(10 Hz)
14
💡 View Verified Solution & Step Rubric
Sol.
hc
hv
= h × 4 × 1014 Hz = 1.654 eV
1.66 eV
JEE Main 2019 • Q93
In a photoelectric experiment, the wavelength
of the light incident on a metal is changed from
300 nm to 400 nm. The decrease in the stopping
potential is close to :
hc
1240 nm
V
e
💡 View Verified Solution & Step Rubric
Sol.
1
1
hc
eV
....... (i)
2
2
hc
eV
....... (ii)
(i) – (ii)
1
2
1
2
1
1
hc
e(V
V )
2
1
1
2
1
2
hc
V
V
e
100nm
(1240nm
V) 300nm
400nm
= 1V
JEE Main 2019 • Q94
A 2 mW laser operates at a wavelength of
500 nm. The number of photons that will be
emitted per second is:
[Given Planck’s constant h = 6.6 × 10–34 Js,
speed of light c = 3.0 × 108 m/s]
💡 View Verified Solution & Step Rubric
Sol.
hc
E
Let no. of photons per sec. is N
hc
N
2 mW
3
19
2
2 5000 10
N
hC
12420 1.6 10
N = 5 × 1015
<<
>>
JEE Main 2019 • Q95
Surface of certain metal is first illuminated with
light of wavelength 1 =350 nm and then, by
light of wavelength 2=54D nm. It is found that
the maximum speed of the photo electrons in
the two cases differ by a factor of 2. The work
function of the metal (in eV) is close to :
(Energjr of photon =
1240
eV
(innm)
)
💡 View Verified Solution & Step Rubric
Sol.
2
1
hc
1 m 2v
2
2
2
hc
1 mv
2
1
1
2
2
hc
hc
hc
4
4
hc
2
1
4hc
hc
3
2
1
1
4
1
hc
3
1
4 350
540
1240
3
350
540
= 1.8 eV
JEE Main 2019 • Q96
In a Frank-Hertz experiment, an electron of energy
5.6 eV passes through mercury vapour and
emerges with an energy 0.7 eV. The minimum
wavelength of photons emitted by mercury atoms
is close to :-
💡 View Verified Solution & Step Rubric
Sol.
1240
nm
5.6
0.7
JEE Main 2019 • Q97
The electric field of light wave is given as
⎛
⎞
⎜
⎟
⎝
⎠
–3
14
–7
2 x
N
ˆ
E
10
cos
– 2
6 10
t x C
5 10
. This
light falls on a metal plate of work function
2eV. The stopping potential of the photo-
electrons is :
Given, E (in eV) =
12375
(in Å)
💡 View Verified Solution & Step Rubric
Sol. = 5 × 10–7 m
8
14
7
3
10
6
10
Hz
5
10
12375
E
2.475 eV
5000
Kmax = E –
= 0.48 eV
JEE Main 2019 • Q98
If p is the momentum of the fastest electron
ejected from a metal surface after the
irradiation of light having wavelength , then
for 1.5 p momentum of the photoelectron, the
wavelength of the light should be :
(Assume kinetic energy of ejected photoelectron
to be very high in comparison to work function):
💡 View Verified Solution & Step Rubric
Sol. In photoelectric effect,
hc = w + KE of electron
It is given that KE of ejected electron is very
high in comparison to w.
2
hc
hc
P
KE
2m
New wavelength
2
1
hc
(1.5P)
4
2m
9