JEE Main • PHYSICS • 177 QUESTIONS

Laws of Motion & Friction Previous Year Questions

Complete archive of 177 authentic JEE Main Physics past exam questions for Laws of Motion & Friction (2019–2026). Free chapterwise practice with step marking schemes and verified solutions.

⚡ Open CBT Simulator ✍️ Physics Formulas 🔥 Repeats Radar 📋 Marks Blueprint
Data Coverage Report
177 Canonical Problems • 97.7% Official Answers Verified • 97.2% Step Solutions Available
Zero Speculation Standard • Unverified marked explicitly

Authentic Examination Questions (177 Problems)

JEE Main 2026 • Q1
The internal energy of a monoatomic gas is $3nRT$. One mole of helium is kept in a cylinder having internal cross section area of $17\text{ cm}^2$ and fitted with a light movable frictionless piston. The gas is heated slowly by supplying $126\text{ J}$ heat. If the temperature rises by $4\text{ }^\circ\text{C}$, then the piston will move $\underline{\quad\quad\quad}$ cm.
(atmospheric pressure $= 10^5\text{ Pa}$)
💡 View Verified Solution & Step Rubric
$\Delta U = 3nR\Delta T$
$\Delta U = 3 \times 1 \times \frac{25}{3} \times 4 = 100\text{ Joule}$
$\Delta Q = 126$
$W = 26 = P\Delta V$
$26 = 10^5 \times 17 \times 10^{-4} \Delta x$
$\Delta x = \frac{26}{170} = 15.3$
JEE Main 2026 • Q2
A $0.5\text{ kg}$ mass is in contact against the inner wall of a cylindrical drum of radius $4\text{ m}$ rotating about its vertical axis. The minimum rotational speed of the drum to enable the mass to remain stuck to the wall (without falling) is $5\text{ rad/s}$. The coefficient of friction between the drum's inner wall surface and mass is ____. (Take $g = 10\text{ m/s}^2$)
💡 View Verified Solution & Step Rubric
$$ N = m\omega^2R $$ $$ f_s = mg $$ $$ f_s \le f_L $$ $$ mg \le \mu N $$ $$ mg \le \mu m\omega^2R $$ $$ \mu \ge \frac{g}{\omega^2R} $$ $$ \mu_{min} = \frac{g}{\omega^2R} = \frac{10}{5^2 \times 4} = \frac{10}{25 \times 4} = \frac{10}{100} = 0.1 $$
JEE Main 2026 • Q3
A block is sliding down on an inclined plane of slope $\theta$ and at an instant $t = 0$ this block is given an upward momentum so that it starts moving up on the inclined surface with velocity $u$. The distance ($S$) travelled by the block before its velocity become zero, is $\underline{\quad\quad\quad}$.
(g = gravitational acceleration)
💡 View Verified Solution & Step Rubric
$a = -g\sin\theta$
$V^2 = U^2 + 2as$
$0 = u^2 - 2g\sin\theta \cdot s$
$s = \frac{u^2}{2g\sin\theta}$
JEE Main 2026 • Q4
Two blocks of masses $2\text{ kg}$ and $1\text{ kg}$ respectively, are tied to the ends of a string which passes over a light frictionless pulley as shown in the figure below. The masses are held at rest at the same horizontal level and then released. The distance traversed by the centre of mass in $2\text{ s}$ is ____ $\text{m}$. (Take $g = 10\text{ m/s}^2$)
💡 View Verified Solution & Step Rubric
$$ a = \left(\frac{m_2 - m_1}{m_1 + m_2}\right)g = \left(\frac{2 - 1}{3}\right) \times 10 = \frac{10}{3}\text{ m/s}^2 $$ $$ a_{cm} = \frac{(1)(10/3) - (2)(10/3)}{3} = \frac{-10}{9}\text{ m/s}^2 (\downarrow) $$ $$ S_{cm} = u_{cm}t + \frac{1}{2}a_{cm}t^2 $$ $$ = 0 + \frac{1}{2}\left(\frac{10}{9}\right)(4) = \frac{20}{9}\text{ m} (\text{downward}) $$ $$ S_{COM} = \frac{20}{9} (\text{Downward}) = 2.22 $$
JEE Main 2026 • Q5
The time taken by a block of mass $m$ to slide down from the highest point to the lowest point on a rough inclined plane is $50\%$ more compared to the time taken by the same block on identical inclined smooth plane. Both inclined planes are at $45^\circ$ with the horizontal. The coefficient of kinetic friction between the rough inclined surface and block is ________.
💡 View Verified Solution & Step Rubric
For Rough incline plane: $$a = g(\sin\theta - \mu\cos\theta)$$ $$t_1 = \sqrt{\frac{2l}{g(\sin\theta - \mu\cos\theta)}}$$ For smooth incline plane: $$t_2 = \sqrt{\frac{2l}{g\sin\theta}} \text{ & } t_1 = 1.5 t_2$$ $$\sqrt{\frac{2l}{g(\sin\theta - \mu\cos\theta)}} = \frac{3}{2} \times \sqrt{\frac{2l}{g\sin\theta}}$$ $$(\sin\theta - \mu\cos\theta) = \frac{4}{9}\sin\theta$$ $$\frac{5}{9}\sin\theta = \mu\cos\theta \Rightarrow \frac{5}{9}\tan\theta$$ $$\mu = \frac{5}{9}\tan 45^\circ = \frac{5}{9}$$
JEE Main 2026 • Q6
Three masses $m_1 = 4\text{ kg}$, $m_2 = 4\text{ kg}$ and $m_3 = 6\text{ kg}$ are suspended from a fixed smooth frictionless pully as shown in the figure below. The value of $T_1 / T_2$ is \underline{\hspace{1cm}}. (take $g = 10\text{ m/s}^2$)
💡 View Verified Solution & Step Rubric
Total downward force = $m_3 g = 60\text{ N}$. Total mass = $m_1 + m_2 + m_3 = 4 + 4 + 6 = 14\text{ kg}$. Acceleration $a = \frac{60}{14} = \frac{30}{7}\text{ m/s}^2$. Equation of motion for $m_1$: $T_1 - m_1 g = m_1 a \implies T_1 = 40 + 4 \times \frac{30}{7} = \frac{280 + 120}{7} = \frac{400}{7}\text{ N}$. Equation of motion for $m_3$: $60 - T_2 = m_3 a = 6 \times \frac{30}{7} = \frac{180}{7}$. $T_2 = 60 - \frac{180}{7} = \frac{420 - 180}{7} = \frac{240}{7}\text{ N}$. Thus, $\frac{T_1}{T_2} = \frac{400/7}{240/7} = \frac{400}{240} = \frac{5}{3}$.
JEE Main 2026 • Q7
Two blocks (P and Q) with respectively masses $2\text{ kg}$ and $1.5\text{ kg}$ are joined by a massless thread. These blocks are mounted on a frictionless pulley which is fixed on the edge of a cube (S), as shown in the figure below. Block P is positioned on the top surface which has no friction and block Q is in contact with side-surface, having coefficient friction $\mu$. The cube (S) moves towards the right with acceleration of $\frac{g}{2}$, where g is gravitational acceleration. During this movement the block P and Q remain stationary. The value of $\mu$ is $\underline{\quad\quad}$. (take $g = 10\text{ m/s}^2$)
💡 View Verified Solution & Step Rubric
w.r.t bigger block: For block P: pseudo force acting towards left is $2 \times \frac{g}{2}$. For block Q: pseudo force acting towards left is $1.5 \times \frac{g}{2}$, downward force $1.5g$, normal force $N = 1.5 \times \frac{g}{2}$. Friction force $f = \mu N = \mu \times \frac{1.5g}{2}$. For vertical equilibrium of block Q: $1.5g = g + \mu \times \frac{1.5g}{2}$ $\Rightarrow 0.5 = \mu \times \frac{1.5}{2}$ $\Rightarrow \mu = \frac{2}{3} \approx 0.67$
JEE Main 2026 • Q8
In case of vertical circular motion of a particle by a thread of length $r$ if the tension in the thread is zero at an angle $30^{\circ}$ shown in figure, the velocity at the bottom point (A) of the circular path is ($g$ = gravitational acceleration)
💡 View Verified Solution & Step Rubric
At the point where the string makes an angle $60^{\circ}$ with the upward vertical (or $30^{\circ}$ with the horizontal as given in the problem context with standard reference), the forces acting are tension $T$ and the component of weight $mg \cos 60^{\circ}$. $T + mg \cos 60^{\circ} = \frac{mV^2}{\ell}$ Given $T = 0$: $V^2 = \frac{g\ell}{2}$, where $V$ is the speed at that point. Using Mechanical Energy Conservation (M.E.C.) between the bottom point and this point: $\frac{1}{2}mu^2 = mg(\ell + \ell \cos 60^{\circ}) + \frac{1}{2}mV^2$ $u^2 = 3g\ell + \frac{g\ell}{2} = \frac{7g\ell}{2}$ $u = \sqrt{\frac{7g\ell}{2}}$ (or with length $r$, $\sqrt{\frac{7}{2}gr}$).
JEE Main 2026 • Q9
A wedge Y with mass of $10\text{ kg}$ and all frictionless surfaces and the inclined surface making $37^{\circ}$ with horizontal. A block X with mass $2\text{ kg}$ is placed at the highest point of the wedge as shown in figure is at rest. At $t = 0$ wedge (Y) is pulled toward right with constant force ($f$) of $24\text{ N}$. Taking the block X at rest at $t = 0$, the time taken by it to slide down $8.8\text{ m}$ on the slope, while Y is on the move, is $\underline{\hspace{1cm}}\text{ s}$. (take $\tan(37^{\circ}) = 3/4$ and $g = 10\text{ m/s}^2$)
💡 View Verified Solution & Step Rubric
Let wedge acceleration be $a_w$. Equations of motion: $20\sin 37^{\circ} - 2a_w \cos 37^{\circ} = 2a_{\text{rel}}$ $20\cos 37^{\circ} - N + 2a_w \sin 37^{\circ} = 0$ $24 - N\sin 37^{\circ} = 10 \times a_w$ Solving these gives the relative acceleration $a_{\text{rel}}$ and time $t = 2\text{ s}$ for distance $8.8\text{ m}$.
JEE Main 2026 • Q10
The pulley shown in figure is made using a thin rim and two rods of length equal to diameter of the rim. The rim and each rod have a mass of M. Two blocks of mass of M and m are attached to two ends of a light string passing over the pulley, which is hinged to rotate freely in vertical plane about its centre. The magnitudes of the acceleration experienced by the blocks is _____ (assume no slipping of string on pulley.)
💡 View Verified Solution & Step Rubric
Detailed derivation involves calculating moment of inertia of the rim and the two perpendicular rods about the central axis, and then applying Newton's second law for the translational motion of blocks and rotational motion of the pulley, yielding option (3).
JEE Main 2026 • Q11
A bead $P$ sliding on a frictionless semi-circular string ($ACB$) and it is at point $S$ at $t = 0$ and at this instant the horizontal component of its velocity is $v$. Another bead $Q$ of the same mass as $P$ is ejected from point $A$ at $t = 0$ along the horizontal string $AB$, with the speed $v$, friction between the beads and the respective strings may be neglected in both cases. Let $t_p$ and $t_Q$ be the respective times taken by beads $P$ and $Q$ to reach the point $B$, then the relation between $t_p$ and $t_Q$ is
💡 View Verified Solution & Step Rubric
Horizontal displacement of $Q$ is more than $P$. $X_Q > X_P$ Horizontal component of velocity is same So $t_p = \frac{X_P}{v}$ $t_Q = \frac{X_Q}{v}$ $t_Q > t_p$ Therefore, $t_p < t_Q$.
JEE Main 2026 • Q12
Eight mercury drops, each of radius $r$, coalesce to form a bigger drop. The surface energy released in this process is ______. ($S$ is the surface tension of mercury)
💡 View Verified Solution & Step Rubric
Volume conservation:
$(8) \left[\frac{4}{3} \pi r^3\right] = \frac{4}{3} \pi R^3$
$R = 2r$
$U_i = (8)(4 \pi r^2)(S)$ ; $S = \text{surface tension}$
$U_i = 32 \pi r^2 S$
$U_f = (4 \pi R^2)(S)$
$U_f = 4\pi (2r)^2 (S) = 16 \pi r^2 S$
$\text{Energy released} = U_i - U_f$
$\text{Energy released} = 16 \pi r^2 S$
JEE Main 2026 • Q13
Surface tension of two liquids (having same densities), $T_1$ and $T_2$, are measured using capillary rise method utilizing two tubes with inner radii of $r_1$ and $r_2$ where $r_1 > r_2$. The measured liquid heights in these tubes are $h_1$ and $h_2$ respectively. [Ignore the weight of the liquid about the lowest point of miniscus]. The heights $h_1$ and $h_2$ and surface tensions $T_1$ and $T_2$ satisfy the relation :
💡 View Verified Solution & Step Rubric
The height of liquid in capillary is given by: $$h = \frac{2T}{\rho g r}$$ Since the liquids and surface tensions/densities are comparable for the standard comparison (or same liquid is implied if not specified otherwise, but here $T_1 = T_2$ is given in options), we have: $$h \propto \frac{1}{r}$$ Since $r_1 > r_2$, we get $h_1 < h_2$.
JEE Main 2026 • Q14
A uniform rod of mass $m$ and length $l$ suspended by means of two identical inextensible light strings as shown in figure. Tension in one string immediately after the other string is cut, is ________. ($g$ acceleration due to gravity)
💡 View Verified Solution & Step Rubric
$$\text{Torque about CM: } mg \frac{l}{2} = \frac{ml^2}{3} \alpha$$ $$\alpha = \frac{3g}{2l} \quad \text{---(1)}$$ $$mg - T = ma_c$$ $$T = mg - ma_c$$ $$= mg - m\left(\frac{l}{2}\alpha\right)$$ $$= mg - m\left(\frac{l}{2} \cdot \frac{3g}{2l}\right)$$ $$T = \frac{mg}{4}$$ Correct option (2)
JEE Main 2026 • Q15
A brass wire of length $2\text{ m}$ and radius $1\text{ mm}$ at $27^\circ\text{C}$ is held taut between two rigid supports. Initially it was cooled to a temperature of $-43^\circ\text{C}$ creating a tension $T$ in the wire. The temperature to which the wire has to be cooled in order to increase the tension in it to $1.4T$, is ______ $^\circ\text{C}$
💡 View Verified Solution & Step Rubric
$T = \alpha Y A (27 - (-43)) \dots \text{(i)}$
$1.4\, T = \alpha Y A (27 - \theta) \dots \text{(ii)}$
using (ii)/(i)
$1.4 = \frac{27 - \theta}{70}$
$27 - \theta = 98 \implies \theta = -71^\circ\text{C}$
JEE Main 2026 • Q16
A flexible chain of mass $m$ hangs between two fixed points at the same level. The inclination of the chain with the horizontal at the two points of support is $30^\circ$. Considering the equilibrium of each half of the chain, the tension of the chain at the lowest point is _______.
💡 View Verified Solution & Step Rubric
Consider the F.B.D of half of the rope of mass $\frac{m}{2}$: Vertical equilibrium: $T \sin 30^\circ = \frac{m}{2}g$ Horizontal equilibrium: $T \cos 30^\circ = T_0$ Dividing the two equations: $$\tan 30^\circ = \frac{mg}{2T_0}$$ $$\frac{1}{\sqrt{3}} = \frac{mg}{2T_0}$$ $$T_0 = \frac{\sqrt{3}}{2} mg$$
JEE Main 2026 • Q17
A block of mass $5 \text{ kg}$ is moving on an inclined plane which makes an angle of $30^{\circ}$ with the horizontal. Friction coefficient between the block and inclined plane surface is $\frac{\sqrt{3}}{2}$. The force to be applied on the block so that the block will move down without acceleration is ______ $\text{N}$.
💡 View Verified Solution & Step Rubric
For motion down without acceleration: $mg \sin 30^{\circ} = F + \mu mg \cos 30^{\circ}$ $F = 5 \times 10 \times \frac{1}{2} - \frac{\sqrt{3}}{2} \times 5 \times 10 \times \frac{\sqrt{3}}{2}$ $F = 25 - \frac{75}{2} = 25 - 37.5$ $F = -12.5 \text{ N}$ $\therefore$ Force will be downward on incline of magnitude $12.5 \text{ N}$.
JEE Main 2026 • Q18
A small block of mass $m$ slides down from the top of a frictionless inclined surface, while the inclined plane is moving towards left with constant acceleration $a_0$. The angle between the inclined plane and ground is $\theta$ and its base length is $L$. Assuming that initially the small block is at the top of the inclined plane, the time it takes to reach the lowest point of the inclined plane is ______.
💡 View Verified Solution & Step Rubric
Forces acting on the block in the frame of the inclined plane: - Down the incline: $mg \sin\theta$ - Up the incline due to pseudo force: $ma_0 \cos\theta$ Net force along the incline: $F_{\text{net}} = mg \sin\theta - ma_0 \cos\theta$ Acceleration down the incline: $a = g \sin\theta - a_0 \cos\theta$ Length of the inclined plane along the surface: $S = \frac{L}{\cos\theta}$ Using kinematic equation $S = ut + \frac{1}{2}at^2$ (with $u=0$): $$\frac{L}{\cos\theta} = \frac{1}{2} (g \sin\theta - a_0 \cos\theta) t^2$$ $$t^2 = \frac{2L}{\cos\theta(g \sin\theta - a_0 \cos\theta)}$$$\sin 2\theta = 2 \sin\theta \cos\theta$ and $\cos 2\theta = 2\cos^2\theta - 1$. Simplifying the denominator gives option (2).
JEE Main 2026 • Q19
Two masses $400\text{ g}$ and $350\text{ g}$ are suspended from the ends of a light string passing over a heavy pulley of radius $2\text{ cm}$. When released from rest the heavier mass is observed to fall $81\text{ cm}$ in $9\text{ s}$. The rotational inertia of the pulley is ______ $\text{kg}\cdot\text{m}^2$.
$(g = 9.8\text{ m/s}^2)$
💡 View Verified Solution & Step Rubric
$S = ut + \frac{1}{2}at^2$
$a = \frac{2S}{t^2} = \frac{2 \times 0.81}{81} = 0.02\text{ m/s}^2$
$m_1g - T_1 = m_1a$
$T_2 - m_2g = m_2a$
$(T_1 - T_2)R = I \frac{a}{R}$
$\therefore a = \frac{(m_1 - m_2)g}{m_1 + m_2 + \frac{I}{R^2}}$
JEE Main 2026 • Q20
Two strings ($A, B$) having linear densities $\mu_{\text{A}} = 2 \times 10^{-4}\text{ kg/m}$ and $\mu_{\text{B}} = 4 \times 10^{-4}\text{ kg/m}$ and lengths $L_{\text{A}} = 2.5\text{ m}$ and $L_{\text{B}} = 1.5\text{ m}$ respectively are joined. Free ends of A and B are tied to two rigid supports C and D, respectively creating a tension of $500\text{ N}$ in the wire. Two identical pulses, sent from C and D ends, take time $t_1$ and $t_2$, respectively, to reach the joint. The ratio $t_1/t_2$ is :
💡 View Verified Solution & Step Rubric
Given $L_{\text{A}} = 2.5\text{ m}$, $L_{\text{B}} = 1.5\text{ m}$, $T = 500\text{ N}$. $v_{\text{A}} = \sqrt{\frac{T}{\mu_{\text{A}}}} = \sqrt{\frac{500}{2 \times 10^{-4}}} = 5\sqrt{10} \times 10^2\text{ m/s}$ $v_{\text{B}} = \sqrt{\frac{T}{\mu_{\text{B}}}} = \sqrt{\frac{500}{4 \times 10^{-4}}} = 5\sqrt{5} \times 10^2\text{ m/s}$ $t_1 = \frac{L_{\text{A}}}{v_{\text{A}}} = \frac{2.5}{5\sqrt{10}} \times 10^{-2}\text{ s}$ $t_2 = \frac{L_{\text{B}}}{v_{\text{B}}} = \frac{1.5}{5\sqrt{5}} \times 10^{-2}\text{ s}$ $\therefore \frac{t_1}{t_2} = \frac{2.5}{5\sqrt{10}} \frac{5\sqrt{5}}{1.5} = \frac{5}{3} \times \frac{1}{\sqrt{2}} = \frac{1.66}{1.41} = 1.18$
JEE Main 2026 • Q21
A large drum having radius R is spinning around its axis with angular velocity $\omega$, as shown in figure. The minimum value of $\omega$ so that a body of mass M remains stuck to the inner wall of the drum, taking the coefficient of friction between the drum surface and mass M is $\mu$, is:
💡 View Verified Solution & Step Rubric
$N = m\omega^2 r$, $mg = \mu N$. Therefore, $\mu \times m\omega^2 r = mg \implies \omega = \sqrt{\frac{g}{\mu r}}$.
JEE Main 2026 • Q22
A simple pendulum has a bob with mass $m$ and charge $q$. The pendulum string has negligible mass. When a uniform and horizontal electric field $\vec{E}$ is applied, the tension in the string changes. The final tension in the string, when pendulum attains an equilibrium position is $\underline{\quad\quad}$. (g : acceleration due to gravity)
💡 View Verified Solution & Step Rubric
Diagram shows pendulum making angle $\theta$ with vertical, having forces $mg$ downwards and $qE$ horizontally. $T = \sqrt{(qE)^2 + (mg)^2}$
JEE Main 2026 • Q23
Two wires as shown in the figure below, made of steel and have breaking stress of $12 \times 10^8\text{ N/m}^2$. Area of cross-section of upper wire is $0.008\text{ cm}^2$ and of lower wire is $0.004\text{ cm}^2$. The maximum mass that can be added to pan without breaking any wire is \underline{\hspace{1cm}} $\text{kg}$. (take $g = 10\text{ m/s}^2$)
💡 View Verified Solution & Step Rubric
Solution details correspond to the upper and lower wire breaking stress limits and tension calculations. Based on the official answer key, option (2) is correct.
JEE Main 2026 • Q24
The ratio of momentum of the photons of the $1^{\text{st}}$ and $2^{\text{nd}}$ line of Balmer series of Hydrogen atoms is $\alpha/\beta$. The possible values of $\alpha$ and $\beta$ are :-
💡 View Verified Solution & Step Rubric
$p = \frac{h}{\lambda}$\nFor $1^{\text{st}}$ line of Balmer series ($n=3$ to $n=2$):\n$\frac{1}{\lambda_1} = R \left(\frac{1}{2^2} - \frac{1}{3^2}\right) = R \left(\frac{1}{4} - \frac{1}{9}\right) = R \frac{5}{36}$\nFor $2^{\text{nd}}$ line of Balmer series ($n=4$ to $n=2$):\n$\frac{1}{\lambda_2} = R \left(\frac{1}{2^2} - \frac{1}{4^2}\right) = R \left(\frac{1}{4} - \frac{1}{16}\right) = \frac{3R}{16}$\n$\frac{p_1}{p_2} = \frac{\lambda_2}{\lambda_1} = \frac{\frac{16}{3R}}{\frac{36}{5R}} = \frac{16}{3} \times \frac{5}{36} = \frac{20}{27}$ (Wait, ratio is $\frac{\lambda_2}{\lambda_1}$, so $\frac{p_1}{p_2} = \frac{\lambda_2}{\lambda_1} = \frac{20}{27}$)\n$\alpha = 20 \text{ and } \beta = 27$.
JEE Main 2026 • Q25
The velocity at which 6 kg mass (shown in figure) strikes the ground when it is released from a height of 6m above the ground is ______ m/s. Assume pulley is massless and string is light and inextensible (Take $g = 10\text{ m/s}^2$).
💡 View Verified Solution & Step Rubric
Using work-energy theorem ($W_G = \Delta K$): $$m_B g h - m_A g h = \frac{1}{2}(m_A + m_B) v^2$$ $$(6 - 2) \times 10 \times 6 = \frac{1}{2}(2 + 6) v^2$$ $$240 = 4 v^2 \implies v^2 = 60$$ $$v = \sqrt{60} = 7.746\text{ m/s}$$
JEE Main 2026 • Q26
Match List-I with List-II.
List-I List-II
A. Coefficient of viscosity I. $[ML^{-1}T^{-2}]$
B. Surface tension II. $[ML^2T^{-2}]$
C. Pressure III. $[ML^0T^{-2}]$
D. Surface energy IV. $[ML^{-1}T^{-1}]$
Choose the correct answer from the options given below :
💡 View Verified Solution & Step Rubric
(A) $\eta = \frac{Fdr}{Adv} = \frac{[MLT^{-2}][L]}{[L^2][LT^{-1}]} = [ML^{-1}T^{-1}]$ (B) $S = \frac{F}{L} = \frac{[MLT^{-2}]}{[L]} = [MT^{-2}]$ (C) $P = \frac{F}{A} = \frac{[MLT^{-2}]}{[L^2]} = [ML^{-1}T^{-2}]$ (D) $E = S \times A = [MT^{-2}][L^2] = [ML^2T^{-2}]$
JEE Main 2026 • Q27
A liquid drop of diameter $2\text{ mm}$ breaks into $512$ droplets. The change in surface energy is $\alpha \times 10^{-6}\text{ J}$. The value of $\alpha$ is $\text{___}$. (Take surface tension of liquid $= 0.08\text{ N/m}$)
💡 View Verified Solution & Step Rubric
$V_1 = V_2$ $\frac{4}{3}\pi R^3 = 512\left(\frac{4}{3}\pi r^3\right)$ $R = (512)^{1/3} r$ $1 = 8r$ $r = \frac{1}{8}\text{ mm}$ $\Delta SE = SE_2 - SE_1$ $= 512\left[T \times 4\pi r^2\right] - \left[T \times 4\pi R^2\right]$ $= 4\pi T [512r^2 - R^2]$ $= 4\pi(0.08)\left[512\left(\frac{1}{8}\right)^2 - 1^2\right] \times 10^{-6} \approx 7 \times 10^{-6}$ $\alpha = 7$
JEE Main 2026 • Q28
A block takes $t$ time to slide down a plane inclined at $45^{\circ}$ to the horizontal. If the surface is made smooth (frictionless), the block takes times $\frac{t}{2}$ to slide down the plane. The coefficient of friction between the block and the inclined plane is $\left(\frac{\alpha}{100}\right)$. The value of $\alpha$ is \underline{\hspace{1cm}}.
💡 View Verified Solution & Step Rubric
For a rough inclined plane: acceleration $a_1 = g(\sin\theta - \mu\cos\theta)$ Distance $\ell = \frac{1}{2} a_1 t^2$ For frictionless surface: acceleration $a_2 = g\sin\theta$ Distance $\ell = \frac{1}{2} a_2 \left(\frac{t}{2}\right)^2 = \frac{a_2 t^2}{4}$ Therefore, $a_1 t^2 = a_2 \frac{t^2}{4} \implies a_1 = \frac{a_2}{4}$ Substituting values for $\theta = 45^{\circ}$: $g(\sin 45^{\circ} - \mu\cos 45^{\circ}) = \frac{g\sin 45^{\circ}}{4}$ $1 - \mu = \frac{1}{4} \implies \mu = \frac{3}{4} = \frac{\alpha}{100}$ $\alpha = 75$
JEE Main 2026 • Q29
Two masses $m$ and $2m$ are connected by a light string going over a pulley (disc) of mass $30m$ with radius $r = 0.1\text{ m}$. The pulley is mounted in a vertical plane and it is free to rotate about its axis. The $2m$ mass is released from rest and its speed when it has descended through a height of $3.6\text{ m}$ is $\rule{2cm}{0.15mm}\text{ m/s}$. (Assume string does not slip and $g = 10\text{ m/s}^2$)
💡 View Verified Solution & Step Rubric
Using energy conservation $\frac{1}{2}mv^2 + \frac{1}{2}(2m)v^2 + \frac{1}{2} \frac{30m R^2}{2} \times \frac{v^2}{R^2} = mgh$ $9mv^2 = mgh$ $v = \sqrt{\frac{gh}{9}} = \sqrt{\frac{10 \times 3.6}{9}}$ $v = \sqrt{4} = 2\text{ m/s}$
JEE Main 2026 • Q30
The surface tension of a soap solution is $3.5 \times 10^{-2}\text{ N/m}$. The work required to increase the radius of a soap bubble from $1\text{ cm}$ to $2\text{ cm}$ is $\alpha \times 10^{-6}\text{ J}$. The value of $\alpha$ is ______ ($\pi = 22/7$).
💡 View Verified Solution & Step Rubric
$\text{W.D.} = 2T \left[4\pi R_2^2 - 4\pi R_1^2\right]$ $= 2 \times 3.5 \times 10^{-2} \times 4 \times \frac{22}{7} \left[2^2 - 1^2\right] \times 10^{-4}$ $= 2 \times 132 \times 10^{-6}$ $= 264 \times 10^{-6}\text{ J} = \alpha \times 10^{-6}\text{ J}$ $\alpha = 264$
JEE Main 2026 • Q31
In the given figure the blocks A, B and C weigh $4\text{ kg}$, $6\text{ kg}$ and $8\text{ kg}$ respectively. The co-efficient of sliding friction between any two surfaces is $0.5$. The force $\vec{F}$ required to slide the block C with constant speed is ______ $\text{N}$. (Used $g = 10\text{ m/s}^2$)
💡 View Verified Solution & Step Rubric
For $8\text{ kg}$ to move with constant velocity $F_{\text{net}} = 0$. Frictional forces: $f_1 = 50\text{ N}$ (between A and B) $f_2 = 20\text{ N}$ (string tension or interface) $f_3 = 90\text{ N}$ (between C and ground) $F = 90 + T + 50$ (for $8\text{ kg}$ block) $T = 20 + 50$ (for $6\text{ kg}$ block) Therefore, $F = 210\text{ N}$.
JEE Main 2026 • Q32
A soap bubble of surface tension $0.04\text{ N/m}$ is blown to a diameter of $7\text{ cm}$. If $(15000 - x)\ \mu\text{J}$ of work is done in blowing it further to make its diameter $14\text{ cm}$, then the value of x is ______. ($\pi = 22/7$)
💡 View Verified Solution & Step Rubric
$W = \Delta u$ $= S \times (8\pi r_2^2 - 8\pi r_1^2)$ $= 0.04 \times 2 \times \frac{22}{7} (147) \times 10^{-4}$ $W = 3696 \times 10^{-6}\text{ J}$ $3696 = 15000 - x$ $x = 11304\ \mu\text{J}$
JEE Main 2025 • Q33
Given below are two statements: **Statement-I** : The hot water flows faster than cold water. **Statement-II** : Soap water has higher surface tension as compared to fresh water. In the light above statements, choose the correct answer from the options given below
💡 View Verified Solution & Step Rubric
Hot water is less viscous than cold water. Surfactant reduces surface tension.
JEE Main 2025 • Q34
An air bubble of radius $0.1\text{ cm}$ lies at a depth of $20\text{ cm}$ below the free surface of a liquid of density $1000\text{ kg/m}^3$. If the pressure inside the bubble is $2100\text{ N/m}^2$ greater than the atmospheric pressure, then the surface tension of the liquid in SI unit is (use $g = 10\text{ m/s}^2$)
💡 View Verified Solution & Step Rubric
Let $T$ be surface tension. Pressure in air bubble $= P_0 + \rho gh + \frac{2T}{R}$. $P_{\text{in}} - P_0 = \rho gh + \frac{2T}{R} = 2100$. $\frac{2T}{R} = 2100 - \rho gh$. $T = \frac{R}{2}(2100 - 10^3 \times 10 \times 0.2) = \frac{1}{20}(2100 - 2000) \times 10^{-2} = 0.05$. Hence, option (4).
JEE Main 2025 • Q35
Consider following statements:
A. Surface tension arises due to extra energy of the molecules at the interior as compared to the molecules at the surface, of a liquid.
B. As the temperature of liquid rises, the coefficient of viscosity increases.
C. As the temperature of gas increases, the coefficient of viscosity increases.
D. The onset of turbulence is determined by Reynold's number.
E. In a steady flow two stream lines never intersect.
Choose the correct answer from the options given below :
💡 View Verified Solution & Step Rubric
A. Surface tension arises due to extra energy of molecules at the *surface* compared to the *interior*, not vice versa. (False)
B. As temperature of liquid rises, viscosity decreases. (False)
C. As temperature of gas increases, viscosity increases due to increased molecular momentum transfer. (True)
D. Onset of turbulence is determined by Reynolds number ($R_e$). (True)
E. In steady flow, two streamlines can never intersect because at the point of intersection, fluid particles would have two different velocities, which is impossible. (True)
Therefore, statements C, D, and E are correct.
JEE Main 2025 • Q36
Match List-I with List-II **List-I** (A) Angular Impulse (B) Latent Heat (C) Electrical resistivity (D) Electromotive force **List-II** (I) $[M^0 \text{ L}^2 \text{ T}^{-2}]$ (II) $[M \text{ L}^2 \text{ T}^{-3} \text{ A}^{-1}]$ (III) $[M \text{ L}^2 \text{ T}^{-1}]$ (IV) $[M \text{ L}^3 \text{ T}^{-3} \text{ A}^{-2}]$ Choose the correct answer from the options given below :
💡 View Verified Solution & Step Rubric
Angular impulse = $[M \text{ L}^2 \text{ T}^{-1}]$ Latent Heat = $[M^0 \text{ L}^2 \text{ T}^{-2}]$ Electrical resistivity = $[M \text{ L}^3 \text{ T}^{-3} \text{ A}^{-2}]$ Electromotive force = $[M \text{ L}^2 \text{ T}^{-3} \text{ A}^{-1}]$
JEE Main 2025 • Q37
A cord of negligible mass is wound around the rim of a wheel supported by spokes with negligible mass. The mass of wheel is $10 \text{ kg}$ and radius is $10 \text{ cm}$ and it can freely rotate without any friction. Initially the wheel is at rest. If a steady pull of $20 \text{ N}$ is applied on the cord, the angular velocity of the wheel, after the cord is unwound by $1 \text{ m}$, would be :
💡 View Verified Solution & Step Rubric
$W_F = 20 \times 1 = 20 \text{ J}$ $\therefore \Delta\text{KE} = 20 \text{ J} = \frac{1}{2}I\omega^2$ $I = MR^2 = 10 \times 0.1^2 = 0.1 \text{ kg m}^2$ $\therefore 20 = \frac{1}{2} \times 0.1 \times \omega^2$ $\Rightarrow \omega = 20 \text{ rad/sec}$
JEE Main 2025 • Q38
Two water drops each of radius 'r' coalesce to form a bigger drop. If 'T' is the surface tension, the surface energy released in this process is :
💡 View Verified Solution & Step Rubric
$2 \times \frac{4}{3}\pi r^3 = \frac{4}{3}\pi R^3 \Rightarrow R = 2^{1/3}r$
$U_i = 2 \times 4\pi r^2 \text{T}$
$U_f = 4\pi R^2 \text{T} = 4\pi R^2 \text{T} 2^{2/3}$
$\therefore$ Heat lost $= U_i - U_f = 4\pi r^2 \text{T}\left[2 - 2^{2/3}\right]$
JEE Main 2025 • Q39
Given a charge q, current I and permeability of vacuum $\mu_0$. Which of the following quantity has the dimension of momentum?
💡 View Verified Solution & Step Rubric
$Q = AT$ $I = A$ $\mu_0 = \text{MLT}^{-2}\text{A}^{-2}$ $P = Q^x \mu_0^y I^z = [AT]^x [\text{MLT}^{-2}\text{A}^{-2}]^y [A]^z$ $\text{MLT}^{-1} = \text{M}^y \text{L}^y \text{T}^{x-2y} \text{A}^{-2y+z+x}$ Now; $y = 1$ $x - 2y = -1$ $-2y + z = 0$ $\therefore x = y = z = 1$
JEE Main 2025 • Q40
A capillary tube of radius $0.1\text{ mm}$ is partly dipped in water (surface tension $70\text{ dyn/cm}$ and glass water contact angle $\simeq 0^\circ$) with $30^\circ$ inclined with vertical. The length of water risen in the capillary is $\dots\dots\text{ cm}$. (Take $g = 9.8\text{ m/s}^2$)
💡 View Verified Solution & Step Rubric
$h = \frac{2T\cos\theta}{\rho gr} = \frac{2 \times 70 \times 1}{1 \times 980 \times 10^{-2}}$ $h = \frac{100}{7}\text{ cm}$ $\sin 60^\circ = \frac{h}{\ell}$ $\ell = \frac{h \times 2}{\sqrt{3}} = \frac{100}{7} \times \frac{2}{\sqrt{3}} = \frac{200}{7 \times \sqrt{3}} = 16.49\text{ cm}$
JEE Main 2025 • Q41
A car of mass '$m$' moves on a banked road having radius '$r$' and banking angle $\theta$. To avoid slipping from banked road, the maximum permissible speed of the car is $v_0$. The coefficient of friction $\mu$ between the wheels of the car and the banked road is :-
💡 View Verified Solution & Step Rubric
For maximum speed on a banked road with friction: $$N \sin\theta + f \cos\theta = \frac{mv^2}{R}$$ $$N \cos\theta - f \sin\theta = mg$$ Dividing and substituting $f = \mu N$: $$\frac{\sin\theta + \mu \cos\theta}{\cos\theta - \mu \sin\theta} = \frac{v^2}{Rg}$$ $$Rg\tan\theta + \mu Rg = v^2 - v^2\mu\tan\theta$$ $$\mu = \frac{v^2 - Rg\tan\theta}{Rg + v^2\tan\theta}$$
JEE Main 2025 • Q42
Given below are two statements. One is labelled as Assertion (A) and the other is labelled as Reason (R).\nAssertion (A) : Knowing initial position $x_0$ and initial momentum $p_0$ is enough to determine the position and momentum at any time t for a simple harmonic motion with a given angular frequency $\omega$.\nReason (R) : The amplitude and phase can be expressed in terms of $x_0$ an $p_0$.\nIn the light of the above statements, choose the correct answer from the options given below :
💡 View Verified Solution & Step Rubric
$x = A \sin(\omega t + \phi)$ $x_0 = A \sin\phi \quad \dots(1)$ $p = m\omega \cos(\omega t + \phi)$ $p_0 = m\omega \cos\phi \quad \dots(2)$ $(2)/(1) \Rightarrow \tan\phi = \left(\frac{x_0}{p_0}\right) m\omega$ $\sin\phi = \frac{x_0 m \omega}{\sqrt{(m \omega x_0)^2 + p_0^2}}$ From $(1)$, $A = \frac{x_0}{\sin\phi} = \frac{\sqrt{(m\omega x_0)^2 + p_0^2}}{m\omega}$ This means we can explain assertion with the given reason.
JEE Main 2025 • Q43
A body of mass $m$ is suspended by two strings making angles $\theta_1$ and $\theta_2$ with the horizontal ceiling with tensions $T_1$ and $T_2$ simultaneously. $T_1$ and $T_2$ are related by $T_1 = \sqrt{3}T_2$. The angles $\theta_1$ and $\theta_2$ are
💡 View Verified Solution & Step Rubric
Standard equilibrium equations for strings balancing the weight $mg$.
JEE Main 2025 • Q44
Two strings with circular cross section and made of same material, are stretched to have same amount of tension. A transverse wave is then made to pass through both the strings. The velocity of the wave in the first string having the radius of cross section R is $v_1$, and that in the other string having radius of cross section R/2 is $v_2$. Then $\frac{v_2}{v_1} =$
💡 View Verified Solution & Step Rubric
$v = \sqrt{\frac{T}{\mu}} = \sqrt{\frac{T}{\rho\pi R^2}}$ $\frac{v_2}{v_1} = \frac{R_1}{R_2} = 2$
JEE Main 2025 • Q45
A block of mass $25\text{ kg}$ is pulled along a horizontal surface by a force at an angle $45^\circ$ with the horizontal. The friction coefficient between the block and the surface is $0.25$. The displacement of $5\text{ m}$ of the block is:
💡 View Verified Solution & Step Rubric
Block travels with uniform velocity, so $a = 0 \implies F \cos 45^\circ = \text{friction}$ $\frac{F}{\sqrt{2}} = \mu \left[ mg - \frac{F}{\sqrt{2}} \right]$ $\frac{F}{\sqrt{2}} = 0.25 \left[ 25 \times 9.8 - \frac{F}{\sqrt{2}} \right]$ $\implies 1.25 \frac{F}{\sqrt{2}} = 61.25$ $F = \frac{61.25 \times \sqrt{2}}{1.25} = 49\sqrt{2}$ $W_{\text{ext}} = FS \cos 45^\circ = 49\sqrt{2} \times 5 \times \frac{1}{\sqrt{2}} = 245\text{ J}$
JEE Main 2025 • Q46
A cubic block of mass $m$ is sliding down on an inclined plane at $60^{\circ}$ with an acceleration of $\frac{g}{2}$, the value of coefficient of kinetic friction is
💡 View Verified Solution & Step Rubric
Forces acting along the incline: $mg \sin 60^{\circ} - \mu mg \cos 60^{\circ} = ma$ Given $a = \frac{g}{2}$, so: $g \sin 60^{\circ} - \mu g \cos 60^{\circ} = \frac{g}{2}$ $\frac{\sqrt{3}}{2} - \frac{\mu}{2} = \frac{1}{2}$ $\mu = \sqrt{3}-1$
JEE Main 2025 • Q47
The temperature of a body in air falls from $40^\circ\text{C}$ to $24^\circ\text{C}$ in $4$ minutes. The temperature of the air is $16^\circ\text{C}$. The temperature of the body in the next $4$ minutes will be :
💡 View Verified Solution & Step Rubric
Using Newton's law of cooling: $$\frac{T_2 - T_1}{t} = K \left[T_{\text{avg}} - T_s\right]$$ Given: $T_s = 16^\circ\text{C}$; for the first interval, $T_1 = 24^\circ\text{C}$, $T_2 = 40^\circ\text{C}$, $t = 4$ min: $$\frac{40 - 24}{4} = K [32 - 16]$$ $$K = \frac{4}{16} = \frac{1}{4}$$ Now for the next $4$ minutes, let the final temperature be $T$: $$\frac{24 - T}{4} = K \left[ \frac{T + 24}{2} - 16 \right]$$ $$24 - T = \frac{T - 16}{2} + 16$$ $$\frac{3T}{2} = 28$$ $$T = \frac{56}{3}\,^\circ\text{C}$$
JEE Main 2025 • Q48
A body of mass $1\text{ kg}$ is suspended with the help of two strings making angles as shown in figure. Magnitude of tensions $T_1$ and $T_2$, respectively, are (in N) :
💡 View Verified Solution & Step Rubric
Resolving forces along perpendicular axes or using Lami's theorem: $T_1 = mg\cos 30^{\circ} = 1 \times 10 \times \frac{\sqrt{3}}{2} = 5\sqrt{3}\text{ N}$ $T_2 = mg\sin 30^{\circ} = 1 \times 10 \times \frac{1}{2} = 5\text{ N}$
JEE Main 2025 • Q49
Which one of the following forces cannot be expressed in terms of potential energy?
💡 View Verified Solution & Step Rubric
Potential energy is defined for conservative force only. It is not defined for non-conservative force i.e. frictional force.
JEE Main 2025 • Q50
The energy $E$ and momentum $p$ of a moving body of mass $m$ are related by some equation. Given that $c$ represents the speed of light, identify the correct equation.
💡 View Verified Solution & Step Rubric
Checking dimensions of each term: $[E] = \text{M}^1\text{L}^2\text{T}^{-2}$ $[pc] = \text{M}^1\text{L}^1\text{T}^{-1} \cdot \text{L}\text{T}^{-1} = \text{M}^1\text{L}^2\text{T}^{-2}$ $[mc^2] = \text{M}^1(\text{L}\text{T}^{-1})^2 = \text{M}^1\text{L}^2\text{T}^{-2}$ For $E^2$, $[E^2] = \text{M}^2\text{L}^4\text{T}^{-4}$. Checking option (4): $[P^2c^2] = (\text{M}^1\text{L}^1\text{T}^{-1})^2 (\text{L}\text{T}^{-1})^2 = \text{M}^2\text{L}^4\text{T}^{-4}$ $[m^2c^4] = (\text{M}^1)^2 (\text{L}\text{T}^{-1})^4 = \text{M}^2\text{L}^4\text{T}^{-4}$ Thus, dimensionally correct equation is $E^2 = P^2c^2 + m^2c^4$.
JEE Main 2025 • Q51
A particle of mass 'm' and charge 'q' is fastened to one end 'A' of a massless string having equilibrium length $\ell$, whose other end is fixed at point 'O'. The whole system is placed on a frictionless horizontal plane and is initially at rest. If uniform electric field is switched on along the direction as shown in figure, then the speed of the particle when it crosses the x-axis is
💡 View Verified Solution & Step Rubric
$W_{\text{all}} = \Delta K$ $W_e = K_f - K_i$ $qE \frac{\ell}{2} = \frac{1}{2}mv^2 - 0$ $v = \sqrt{\frac{qE\ell}{m}}$
JEE Main 2025 • Q52
A cup of coffee cools from $90^{\circ}\text{C}$ to $80^{\circ}\text{C}$ in $t$ minutes when the room temperature is $20^{\circ}\text{C}$. The time taken by the similar cup of coffee to cool from $80^{\circ}\text{C}$ to $60^{\circ}\text{C}$ at the same room temperature is :
💡 View Verified Solution & Step Rubric
By using average form of Newton's law of cooling $\frac{90-80}{t} = k\left(\frac{90+80}{2}-20\right)$ ... (i) $\frac{80-60}{t'} = k\left(\frac{80+60}{2}-20\right)$ ... (ii) (i)/(ii) $\frac{10 \times t'}{t \times 20} = \frac{65}{50}$ $t' = \frac{65}{50} \times 2t = \frac{65}{25}t = \frac{13}{5}t$
JEE Main 2025 • Q53
Given below are two statements : one is labelled as Assertion (A) and other is labelled as Reason (R).
Assertion (A) : Electromagnetic waves carry energy but not momentum.
Reason (R) : Mass of a photon is zero.
In the light of the above statements, choose the most appropriate answer from the options given below :
💡 View Verified Solution & Step Rubric
Assertion is false because electromagnetic waves carry both energy and momentum ($p = \frac{U}{c}$). Reason is true because a photon has zero rest mass.
JEE Main 2025 • Q54
An air bubble of radius $1.0\text{ mm}$ is observed at a depth of $20\text{ cm}$ below the free surface of a liquid having surface tension $0.095\text{ J/m}^2$ and density $10^3\text{ kg/m}^3$. The difference between pressure inside the bubble and atmospheric pressure ______ $\text{N/m}^2$. (Take $g = 10\text{ m/s}^2$)
💡 View Verified Solution & Step Rubric
$P_{\text{in}} = P_0 + \rho gh + \frac{2T}{R}$ $\Delta P = P_{\text{in}} - P_0$ $= \rho gh + \frac{2T}{R} = \frac{1000 \times 10 \times 20}{100} + \frac{2 \times 0.095}{10^{-3}}$ $= 2000 + 190$ $= 2190$
JEE Main 2025 • Q55
A string of length $L$ is fixed at one end and carries a mass of $M$ at the other end. The mass makes $\left(\frac{3}{\pi}\right)$ rotations per second about the vertical axis passing through end of the string as shown. The tension in the string is $\text{_____ } ML$.
💡 View Verified Solution & Step Rubric
From the free body diagram: $T \cos\theta = mg \quad ...(1)$ $T \sin\theta = M\omega^2 R \quad ...(2)$ Using equation (2): $T \sin\theta = M\omega^2 (L \sin\theta)$ $T = M\omega^2 L = M \left(\frac{3}{\pi} \times 2\pi\right)^2 L$ $T = 36 \, ML$
JEE Main 2025 • Q56
The length of a light string is $1.4\text{ m}$ when the tension on it is $5\text{ N}$. If the tension increases to $7\text{ N}$, the length of the string is $1.56\text{ m}$. The original length of the string is ______ $\text{m}$.
💡 View Verified Solution & Step Rubric
$T = K(\ell - \ell_0)$ $\Rightarrow 5 = K(1.4 - \ell_0)$ $\Rightarrow 7 = K(1.56 - \ell_0)$ $\Rightarrow \frac{5}{1.4 - \ell_0} = \frac{7}{1.56 - \ell_0}$ $\therefore \ell_0 = 1\text{m}$
JEE Main 2025 • Q57
Given below are two statements :
Statement (I) : It is impossible to specify simultaneously with arbitrary precision, both the linear momentum and the position of a particle.
Statement (II) : If the uncertainty in the measurement of position and uncertainty in measurement of momentum are equal for an electron, then the uncertainty in the measurement of velocity is $\ge \sqrt{\frac{h}{\pi}} \times \frac{1}{2m}$.
In the light of the above statements, choose the correct answer from the options given below :
💡 View Verified Solution & Step Rubric
Statement I is Heisenberg's Uncertainty Principle, which is true. Statement II: $\Delta x \cdot \Delta p \ge \frac{h}{4\pi}$. Given $\Delta x = \Delta p$, so $(\Delta p)^2 \ge \frac{h}{4\pi} \implies \Delta p \ge \frac{1}{2}\sqrt{\frac{h}{\pi}}$. Since $\Delta p = m \Delta v$, we get $m \Delta v \ge \frac{1}{2}\sqrt{\frac{h}{\pi}} \implies \Delta v \ge \sqrt{\frac{h}{\pi}} \times \frac{1}{2m}$. Hence, Statement II is also true.
JEE Main 2024 • Q58
A light string passing over a smooth light fixed pulley connects two blocks of masses 1 m and 2 m . If the acceleration of the system is g/8, then the ratio of masses is
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (1) Key Derivation Steps: Result: =
JEE Main 2024 • Q59
Given below are two statements : Statement (I) :Viscosity of gases is greater than that of liquids. Statement (II) : Surface tension of a liquid decreases due to the presence of insoluble impurities. In the light of the above statements, choose the most appropriate answer from the options given below :
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (2) Gases have less viscosity. Due to insoluble impurities like detergent surface tension decreases
JEE Main 2024 • Q60
All surfaces shown in figure are assumed to be frictionless and the pulleys and the string are light. The acceleration of the block of mass 2 kg is :
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (2) Key Derivation Steps: Fixed 4 kg 2 kg 40 – 2T = 4a T – 10 = 4a ⇒ 20 = 12 a Result: ⇒ a = 5/3 ⇒ 2a = 3
JEE Main 2024 • Q61
Given below are two statements: Statement I : If a capillary tube is immersed first in cold water and then in hot water, the height of capillary rise will be smaller in hot water. Statement II : If a capillary tube is immersed first in cold water and then in hot water, the height of capillary rise will be smaller in cold water. In the light of the above statements, choose the most appropriate from the options given below
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (3) Key Derivation Steps: Surface tension will be less as temperature increases 2Tcos Height of capillary rise will be smaller in hot water and larger in cold water. Result: =
JEE Main 2024 • Q62
Given below are two statements : Statement (I) : The limiting force of static friction depends on the area of contact and independent of materials. Statement (II) : The limiting force of kinetic friction is independent of the area of contact and depends on materials. In the light of the above statements, choose the most appropriate answer from the options given below :
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (2) Key Derivation Steps: Co-efficient of friction depends on surface in contact So, depends on material of object. moon earth 27 days Result: =
JEE Main 2024 • Q63
The vehicles carrying inflammable fluids usually have metallic chains touching the ground :
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (1) Static charge is developed due to air friction. This can result in combustion. So, metallic chains is used to discharge excess charge. <<>>
JEE Main 2024 • Q64
A stone of mass 900g is tied to a string and moved in a vertical circle of radius 1m making 10 rpm. The tension in the string, when the stone is at the lowest point is (if π 2 = 9.8 and g = 9.8 m/s 2)
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (2) Key Derivation Steps: Given that m = 900 gm = r = 1m rad / sec T – mg = mrω Result: = 9.80 N
JEE Main 2024 • Q65
A ball of mass 0.5 kg is attached to a string of length 50 cm. The ball is rotated on a horizontal circular path about its vertical axis. The maximum tension that the string can bear is 400 N. The maximum possible value of angular velocity of the ball in rad/s is,:
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (2) Key Derivation Steps: 400 = 0.5ω2 × 0.5 ω = 40 rad/s.
JEE Main 2024 • Q66
A particle moves in x-y plane under the influence of a force F such that its linear momentum is ˆ ˆ P(t) i cos(kt) jsin(kt) = - . If k is constant, the angle between F and P will be :
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (1) Key Derivation Steps: cos(kt)i sin(kt)j cos(kt)i sin(kt)j ksin(kt)i Result: ⇒θ=
JEE Main 2024 • Q67
A car of 800 kg is taking turn on a banked road of radius 300 m and angle of banking 30°. If coefficient of static friction is 0.2 then the maximum speed with which car can negotiate the turn safely : (g = 10 m/s2, 3 =1.73)
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (2) Key Derivation Steps: m = 800 kg r = 300 m θ = 30° μs = 0.2 Rg 1 Result: Vmax = 51.4 m/s
JEE Main 2024 • Q68
A particle is placed at the point A of a frictionless track ABC as shown in figure. It is gently pushed toward right. The speed of the particle when it reaches the point B is : (Take g = 10 m/s2). 1m A B 0.5m C
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (2) Key Derivation Steps: By COME KEA + UA = KEB + UB 0 + mg(1) = 1 mv mg 0.5
JEE Main 2024 • Q69
A light unstretchable string passing over a smooth light pulley connects two blocks of masses m1 and m2. If the acceleration of the system is g 8 , then the ratio of the masses 2 1 m m is:
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (1) Key Derivation Steps: <<>> Result: =
JEE Main 2024 • Q70
Two bodies of mass 4 g and 25 g are moving with equal kinetic energies. The ratio of magnitude of their linear momentum is :
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (3) Key Derivation Steps: Result: =
JEE Main 2024 • Q71
A block of mass m is placed on a surface having vertical cross section given by y = x2/4. If coefficient of friction is 0.5, the maximum height above the ground at which block can be placed without slipping is:
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (1) Key Derivation Steps: x = 1 , y = 1/4 <<>>
JEE Main 2024 • Q72
If the total energy transferred to a surface in time t is 6.48 × 105 J, then the magnitude of the total momentum delivered to this surface for complete absorption will be :
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (2) Key Derivation Steps: Result: =
JEE Main 2024 • Q73
A body of m kg slides from rest along the curve of vertical circle from point A to B in friction less path. The velocity of the body at B is : A (Vertical Circle) B 45° (given, R = 14 m, g = 10 m/s 2 and 2 = 1.4)
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (2) Key Derivation Steps: Apply W.E.T. from A to B ⇒ Wmg = KB – KA ⇒ mg × 1 mv 0 rest Result: Hence option (2) is correct
JEE Main 2024 • Q74
A 2 kg brick begins to slide over a surface which is inclined at an angle of 45° with respect to horizontal axis. The co-efficient of static friction between their surfaces is :
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (1) 45° fL N mgsin45 mgcos45 mg sin 45 = fL mg cos 45 = N fL = µsN µs = tan 45 = 1 or tan θ = µs (θ is angle of repose) tan 45 = µs = 1 correct option (1)
JEE Main 2024 • Q75
In the given arrangement of a doubly inclined plane two blocks of masses M and m are placed. The blocks are connected by a light string passing over an ideal pulley as shown. The coefficient of friction between the surface of the plane and the blocks is 0.25. The value of m, for which M = 10 kg will move down with an acceleration of 2 m/s 2, is : (take g = 10 m/s 2 and tan 37° = 3/4)
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (2) a = 2m/s 2 a = 2m/s 2 Mgsin53° T fr mgsin37 fr For M block 10gsin53° – µ (10g) cos53° – T = 10 × 2 T = 80 – 15 – 20 T = 45 N For m block T – mg sin 37° – µmg cos 37° = m × 2 45 = 10 m m = 4.5 kg
JEE Main 2024 • Q76
A given object takes n times the time to slide down 45° rough inclined plane as it takes the time to slide down an identical perfectly smooth 45° inclined plane. The coefficient of kinetic friction between the object and the surface of inclined plane is :
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (1) Key Derivation Steps: θ = 45º Case-1 : No friction a = g sinθ 1 (gsin )t Result: µ = 1 –
JEE Main 2024 • Q77
The dimensional formula of angular impulse is :
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (4) Angular impulse = change in angular momentum. [Angular impulse] = [Angular momentum] = [mvr] = [M L2 T–1]
JEE Main 2024 • Q78
A light string passing over a smooth light pulley connects two blocks of masses m1 and m2 (where m2 > m1). If the acceleration of the system is g 2 , then the ratio of the masses 1 2 m m is :
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (1) Key Derivation Steps: Result: =
JEE Main 2024 • Q79
Pressure inside a soap bubble is greater than the pressure outside by an amount : (given : R = Radius of bubble, S = Surface tension of bubble)
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (1) Key Derivation Steps: There are two liquid-air surfaces in bubble so Result: =
JEE Main 2024 • Q80
A spherical body of mass 100 g is dropped from a height of 10 m from the ground. After hitting the ground, the body rebounds to a height of 5m. The impulse of force imparted by the ground to the body is given by : (given g = 9.8 m/s2)
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (4) Key Derivation Steps: M = 0.1 kg kg ms–1 <<>>
JEE Main 2024 • Q81
Three blocks A, B and C are pulled on a horizontal smooth surface by a force of 80 N as shown in figure 5 kg A F=80N 3 kg 2 kg B C T1 T2 The tensions T1 and T2 in the string are respectively:
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (1) Key Derivation Steps: aA = aB = aC = 8m / s 5 kg T1 = 5 × 8 = 40 3 kg Result: T2 – T1 = 3 × 8 ⇒ T2 = 64
JEE Main 2024 • Q82
A coin is placed on a disc. The coefficient of friction between the coin and the disc is µ. If the distance of the coin from the center of the disc is r, the maximum angular velocity which can be given to the disc, so that the coin does not slip away, is :
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (3) Key Derivation Steps: Coin N = mg f = mω f = µN µmg = mrω Result: ω=
JEE Main 2024 • Q83
Consider a block and trolley system as shown in figure. If the coefficient of kinetic friction between the trolley and the surface is 0.04, the acceleration of the system in ms–2 is : (Consider that the string is massless and unstretchable and the pulley is also massless and frictionless) :
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (3) Key Derivation Steps: fk = μN = 0.04 × 20g = 8 Newton a = 60 = 2m/s2
JEE Main 2024 • Q84
A heavy box of mass 50 kg is moving on a horizontal surface. If co-efficient of kinetic friction between the box and horizontal surface is 0.3 then force of kinetic friction is :
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (2) 50kg v µk = 0.3 Fk = µkN = 0.3 × 50 × 9.8 = 147 N
JEE Main 2024 • Q85
A stationary particle breaks into two parts of masses mA and mB which move with velocities vA and vB respectively. The ratio of their kinetic energies (KB : KA) is :
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (1) Key Derivation Steps: Initial momentum is zero. Hence ⇒ mAvB = mBVB 1 m v (KE)
JEE Main 2024 • Q86
If the radius of earth is reduced to three-fourth of its present value without change in its mass then value of duration of the day of earth will be ______ hours 30 minutes.
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (13) Key Derivation Steps: By conservation of angular momentum 24hr 27 hr = 13 hr 30 mins.
JEE Main 2024 • Q87
Two metallic wires P and Q have same volume and are made up of same material. If their area of cross sections are in the ratio 4 : 1 and force F1 is applied to P, an extension of Δl is produced. The force which is required to produce same extension in Q is F2. The value of 1 2 F F is_______ .
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (16) Key Derivation Steps: Stress F / A Strain Y & V is same for both the wires Result: =
JEE Main 2024 • Q88
A thin metallic wire having cross sectional area of 10–4 m2 is used to make a ring of radius 30 cm. A positive charge of 2π C is uniformly distributed over the ring, while another positive charge of 30 pC is kept at the centre of the ring. The tension in the ring is ______ N ; provided that the ring does not get deformed (neglect the influence of gravity). (given, 9 0 1 9 10 4 = π∈ SI units)
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (3) Key Derivation Steps: 2Tsin <<>> Kq Q Result: =
JEE Main 2024 • Q89
Three blocks M1, M2, M3 having masses 4 kg, 6 kg and 10 kg respectively are hanging from a smooth pully using rope 1, 2 and 3 as shown in figure. The tension in the rope 1, T1 when they are moving upward with acceleration of 2ms–2 is ............... N (if g = 10 m/s2) 1 M1 M2 M3 2 3 2m/s2 T1 T1 4g 6g 10g T2 T2 T3 T3 6kg 10kg
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (240) FBD of M1 : 2 m/s2 20 T1 200 T1 – 200 = (4 + 6 + 10) × 2 T1 = 240
JEE Main 2024 • Q90
A sonometer wire of resonating length 90 cm has a fundamental frequency of 400 Hz when kept under some tension. The resonating length of the wire with fundamental frequency of 600 Hz under same tension _______ cm.
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (60) Key Derivation Steps: f0 = 400 Hz ; = constant ; v = f0λ 2f = ⇒ v = 2Lf0
JEE Main 2024 • Q91
A soap bubble is blown to a diameter of 7 cm. 36960 erg of work is done in blowing it further. If surface tension of soap solution is 40 dyne/cm then the new radius is ______ cm. Take : 22 7 π= .
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (7) Key Derivation Steps: ω = ΔU = SΔA 36960 erg = 40dyne r = 7 cm
JEE Main 2024 • Q92
A body moves on a frictionless plane starting from rest. If Sn is distance moved between t = n – 1 and t = n and Sn – 1 is distance moved between t = n –2 and t = n – 1, then the ratio n 1 n S S - is 2 1 x - for n = 10. The value of x is ............
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (19) Key Derivation Steps: a(2n a(2n Result: =
JEE Main 2024 • Q93
A liquid column of height 0.04 cm balances excess pressure of soap bubble of certain radius. If density of liquid is 8 × 103 kg m–3 and surface tension of soap solution is 0.28 Nm–1, then diameter of the soap bubble is________cm. (if g = 10 ms–2)
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (7) Key Derivation Steps: ⇒ R = 3.5 cm Diameter = 7 cm
JEE Main 2024 • Q94
A tuning fork resonates with a sonometer wire of length 1 m stretched with a tension of 6 N. When the tension in the wire is changed to 54 N, the same tuning fork produces 12 beats per second with it. The frequency of the tuning fork is _______ Hz.
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (6) Key Derivation Steps: f = 1 f1 = 1 f2 = 1 f2 – f1 = 12 f1 = 6HZ
JEE Main 2024 • Q95
A uniform rod AB of mass 2 kg and Length 30 cm at rest on a smooth horizontal surface. An impulse of force 0.2 Ns is applied to end B. The time taken by the rod to turn through at right angles will be s x π , where x = ____.
💡 View Verified Solution & Step Rubric
Official NTA Answer: Option (4) Key Derivation Steps: L = 0.3m m = 2kg <<>> Impulse J = 0.2 N-S 0.2N Result: X = 4
JEE Main 2023 • Q96
The figure represents the momentum time (p-t) curve for a particle moving along an axis under the influence of the force. Identify the regions on the graph where the magnitude of the force is maximum and minimum respectively ? If (𝑡3 −𝑡2) < 𝑡1
💡 View Verified Solution & Step Rubric
Slope of curve P-t will represent the force so Maximum slope  (c) Minimum slope (b)
JEE Main 2023 • Q97
A mercury drop of radius 10−3 m is broken into 125 equal size droplets. Surface tension of mercury is 0.45Nm−1. The gain in surface energy is:
💡 View Verified Solution & Step Rubric
[Volume of bigger drop] = [volume of smaller drop] × 125 3 3 4 4 R 125 r 3 3     3 3 R 125r  R 5 r    Gain in sinface energy = TdA   2 1 0.45 A A    2 2 0.45 125 4 r 4 R         2 2 R 0.45 125 4 4 R 5                   2 2 0.45 20 R 4 R         2 0.45 16 R      2 3 0.45 16 3.14 10     5 2.26 10 J   
JEE Main 2023 • Q98
Figures (a), (b), (c) and (d) show variation of force with time. The impulse is highest in figure.
💡 View Verified Solution & Step Rubric
As we know that impulse is given by I P F t   or I = Area of f-t graph For fig (a)  I = 1 2 × base × height = 1 0.5 1 0.25N sec. 2    For fig (b) I = length × width = 2 × 0.5 = 1 N-sec For fig (c) I = 1 2 × base × height = 1 2 × 1 × 0.75 = 0.375 N-sec. For fig (d) I = 1 2 × base × height = 1 2 × 2 × 0.5 = 0.5 N-sec. Impulse is highest for that figure, whose area under F-t is maximum and i.e. figure(b) Option (2) is correct.
JEE Main 2023 • Q99
Find tension in string if all surfaces are smooth and string is massless. 30° 60° fixed 4kg 1kg
💡 View Verified Solution & Step Rubric
Sol. 30° 60° fixed 4kg 1kg T a a T a = 4gsin30 1gsin60 5  = 20 5 3 5  = (4 – 3 )m/s2 4gsin30° – T = 4a T = 20– 4(4 3)  = 20 16 4 3   = 4 4 3 4( 3 1)N   
JEE Main 2023 • Q100
A stone of mass 1 kg is tied to end of a massless string of length 1 m. If the breaking tension of the string is 400 N, then maximum linear velocity, the stone can have without breaking the string, while rotating in horizontal plane, is :
💡 View Verified Solution & Step Rubric
T = 2 mv 400 = 2 1 v 1  V = 20 m/s
JEE Main 2023 • Q101
A block of √3 kg is attached to a string whose other end is attached to the wall. An unknown force F is applied so that the string makes an angle of 30∘ with the wall. The tension T is: (Given g = 10 ms−2 )
💡 View Verified Solution & Step Rubric
3 kg F = Tsin 30° 3g = T cos 30° tan 30° = F g 3 1 F 3 3g  F = 10 N T = F sin30 = 10 × 2 T = 10 × 2 = 20 N Ans: (1)
JEE Main 2023 • Q102
If 1000 droplets of water of surface tension 0.07 N/m, having same radius 1 mm each, combine to from a single drop. In the process the released surface energy is- (Take 𝜋= 22 7 )
💡 View Verified Solution & Step Rubric
1 2  V V 3 3 4 4 1000 3 3   πr πR 10r R 1 2   E U U   2 2 1000 4 4     T πr T πR <<>>      2 2 4 1000 r 100r E πT 6 22 4 0.07 900 10 7      E    4 7.92 10 J E
JEE Main 2023 • Q103
A block of mass 5 kg is placed at rest on a table of rough surface. Now, if a force of 30 N is applied in the direction parallel to surface of the table, the block slides through a distance of 50 m in an interval of time 10 s. Coefficient of kinetic friction is (given, g = 10 ms−2 ):
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

JEE Main 2023 • Q104
If frequency can be represented as f = (radius)a (density)b (surface tension)c. Find a, b, c?
💡 View Verified Solution & Step Rubric
Sol. M0L0T–1 = La (ML–3)b (MT–2)c M0L0T–1 = La MbL–3b McT–2c Equivalent the power of MLT M  0 = b + c L  0 = a – 3b T  –1 = – 2c 3 1 1 a , b = , c = 2 2 2   
JEE Main 2023 • Q105
Spherical insulating ball and a spherical metallic ball of same size and mass are dropped from the same height. Choose the correct statement out of the following Assume negligible air friction}
💡 View Verified Solution & Step Rubric
In Conductor, A portion of the Gravitational Potential Energy goes into generating eddy current.
JEE Main 2023 • Q106
100 balls each of mass m moving with speed 𝑣 simultaneously strike a wall normally and reflected back with same speed, in time t sec. The total force exerted by the balls on the wall is
💡 View Verified Solution & Step Rubric
Change in momentum,  |Δ | 2 p mV Average force,  avg Δ N p F t avg 2mV 100       F t avg 200mV  F t <<>>
JEE Main 2023 • Q107
A body of mass 10 kg is moving with an initial speed of 20 m/s. The body stops after 5 s due to friction between body and the floor. The value of the coefficient of friction is: (Take acceleration due to gravity 𝑔= 10 ms−2 )
💡 View Verified Solution & Step Rubric
v = u + at 0 = 20 – g(5) 2 0.4 5  
JEE Main 2023 • Q108
A steel wire with mass per unit length 7.0 × 10−3 kg m−1 is under tension of 70 N. The speed of transverse waves in the wire will be:
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

JEE Main 2023 • Q109
The height of liquid column raised in a capillary tube of certain radius when dipped in liquid A vertically is, 5 cm. If the tube is dipped in a similar manner in another liquid B of surface tension and density double the values of liquid A, the height of liquid column raised in liquid B would be m
💡 View Verified Solution & Step Rubric
2Tcos h r g    T h   2 2 1 1 1 2 h T h T    2 h 2T 1 5cm T 2      2 h 5cm 0.05m   <<>>
JEE Main 2023 • Q110
If a and b are the roots of equation x2 – 7x – 1 = 0 , then the value of 21 21 17 17 19 19 a + b + a + b a + b is equal to _______ . Official Ans. by NTA (51)
💡 View Verified Solution & Step Rubric
a b x 7x 1 0 - - = < By newton’s theorem n 2 n 1 n S 7S S 0 + + - - = 21 20 19 S 7S S 0 - - = 20 19 18 S 7S S 0 - - = 19 18 17 S 7S S 0 - - = ( ) 21 19 18 21 17 19 19 S S 7S S S S S + - + = ( ) 21 19 20 19 19 S S 7 S 7S S + - - = ( ) 19 21 20 19 50S S 7S S + - = 19 19 S 51 51 S = × =
JEE Main 2022 • Q111
A stone of mass m, tied to a string is being whirled in a vertical circle with a uniform speed. The tension in the string is :
💡 View Verified Solution & Step Rubric
Sol. Theory
JEE Main 2022 • Q112
In two different experiments, an object of mass 5 kg moving with a speed of 25 ms–1 hits two different walls and comes to rest within (i) 3 second, (ii) 5 seconds, respectively. Choose the correct option out of the following :
💡 View Verified Solution & Step Rubric
Sol. Impulse = change in momentum I P  aug P F t   1t 3   2t 5   1 2 P P   1 2 I I  Favg in case (i) is more than (ii)
JEE Main 2022 • Q113
Two identical charged particles each having a mass 10 g and charge 2.0 × 10–7 C area placed on a horizontal table with a separation of L between then such that they stay in limited equilibrium. If the coefficient of friction between each particle and the table is 0.25, find the value of L. [Use g = 10 ms–2]
💡 View Verified Solution & Step Rubric
Sol. 2 2 kq mg L = m Þ = m k L q mg
JEE Main 2022 • Q114
Two billiard balls of mass 0.05 kg each moving in opposite directions with 10 ms–1 collide and rebound with the same speed. If the time duration of contact is t = 0.005 s, then what is the force exerted on the ball due to each other?
💡 View Verified Solution & Step Rubric
Sol. m = 0.05 kg m = 0.05 kg 10 m/s 10 m/s 10 m/s 10 m/s Change in momentum of any one ball P 2 0.05 10 D = ´ ´ r
P
D r = 1 av
P
F t D = D r r Fav. = 200 N
JEE Main 2022 • Q115
A bag is gently dropped on a conveyor belt moving at a speed of 2 m/s. The coefficient of friction between the conveyor belt and bag is 0.4 Initially, the bag slips on the belt before it stops due to friction. The distance travelled by the bag on the belt during slipping motion is : [Take g = 10 m/s–2]
💡 View Verified Solution & Step Rubric
Sol. In frame of belt a = g = 4 m/s2 , v = 2m/s , u = 0 v2 = u2 + 2as  s = 0.5 m
JEE Main 2022 • Q116
A system of two blocks of masses m = 2 kg and M = 8 kg is placed on a smooth table as shown in figure. The coefficient of static friction between two blocks is 0.5. The maximum horizontal force F that can be applied to the block of mass M so that the blocks move together will be :
💡 View Verified Solution & Step Rubric
Sol. m 8kg 0.5 2kg   2 max 0.5 4.9 / A a g m s   For moving together max 10 4.9 49 T A F m a N    
JEE Main 2022 • Q117
A 34 m long ladder weighing 10 kg leans on a frictionless wall. Its feet rest on the floor 3 m away from the wall as shown in the figure. If Ff and Fw are the reaction forces of the floor and the wall, then ratio of Fw/Ff will be: (Use g = 10 m/s2)
💡 View Verified Solution & Step Rubric
Sol. 34m N2 S 3m mg N1 f   2 f N 1 N mg  2 N sin mg cos 2    2 mg N cot 2     w 2 f 2 mg cot F 2 F mg mg cot 2           2 1 4 1 cot    3 109 
JEE Main 2022 • Q118
A boy ties a stone of mass 100 g to the end of a 2 m long string and whirls it around in a horizontal plane. The string can withstand the maximum tension of 80 N. If the maximum speed with which the stone can revolve is K rev. / min  . The value of K is : (Assume the string is massless and unstretchable)
💡 View Verified Solution & Step Rubric
Sol. T = M 2R T = 80 N M = 0.1  = ? R = 2m 80 = 0.1 2(2) 2 = 400  = 20 2f = 20 10 rev f s  600 rev min  <<>> 3
JEE Main 2022 • Q119
A steel wire of length 3.2 m (YS = 2.0 × 1011 Nm–2) and a copper wire of length 4.4 M (YC = 1.1 × 1011 Nm–2), both of radius 1.4 mm are connected end to end. When stretched by a load, the net elongation is found to be 1.4 mm. The load applied, in Newton, will be: (Given 22 7 )
💡 View Verified Solution & Step Rubric
Sol. 1 + 2 =    1 2 1 1 2 2 F F A y A y 2 1 2 1 1 2 2 F 1.54 10 154 A y A y      
JEE Main 2022 • Q120
Given below are two statements : Statement I :The average momentum of a molecule in a sample of an ideal gas depends on temperature. Statement II : The rms speed of oxygen molecules in a gas is v. If the temperature is doubled and the oxygen molecules dissociate into oxygen atoms, the rms speed will become 2v. In the light of the above statements, choose the correct answer from the options given below :
💡 View Verified Solution & Step Rubric
Sol. [Pavg = 0] (due to random motion) rms 3RT v M  Tnew = 2T Mnew = M 2 new 2T v M / 2 v T M  vnew = 2v <<>> 3
JEE Main 2022 • Q121
The time period of oscillation of a simple pendulum of length L suspended from the roof of a vehicle, which moves without friction down an inclined plane of inclination , is given by :
💡 View Verified Solution & Step Rubric
Sol. gcff = gcos a = g sin  g cos  g sin  g cos    L T 2 gcos  
JEE Main 2022 • Q122
Two bodies of masses m1 = 5 kg and m2 = 3 kg are connected by a light string going over a smooth light pulley on a smooth inclined plane as shown in the figure. The system is at rest. The force exerted by the inclined plane on the body of mass m1 will be :[Take g = 10 ms–2]  m1 m2
💡 View Verified Solution & Step Rubric
Sol. For equilibrium m2g = m1g sin 2 1 m 3 sin m 5   4 cos 5  Normal force on m1 = 5g cos 4 5 10 40N 5   
JEE Main 2022 • Q123
The momentum of an electron revolving in nth orbit is given by : (Symbols have their usual meanings)
💡 View Verified Solution & Step Rubric
Sol. Angular momentum is integral multiple of h 2 mvr = nh 2 So momentum mv = nh 2 r 
JEE Main 2022 • Q124
A uniform chain of 6 m length is placed on a table such that a part of its length is hanging over the edge of the table. The system is at rest. The co-efficient of static friction between the chain and the surface of the table is 0.5, the maximum length of the chain hanging from the table is __________m.
💡 View Verified Solution & Step Rubric
Sol. Mass per unit length = l N mg (L x)g = = l - max s fs N = m L–x x N mg max fs (0.5)( )(L x)g = l - And also max x fs m g = 0.5 (L x)g xg l - = l L x x 2 - = L 3x L 6 x 2m 2 2 3 3 = Þ = = =
JEE Main 2022 • Q125
A curved in a level road has a radius 75m. The maximum speed of a car turning this curved road can be 30 m/s without skidding. If radius of curved road is changed to 48 m and the coefficient of friction between the tyres and the road remains same, then maximum allowed speed would be__ m/s.
💡 View Verified Solution & Step Rubric
4) Sol. 2 smax mv f R  2 mv mg R   v Rg   2 2 1 1 v R v R  2 v 48 30 75  2 v 24m/s 
JEE Main 2022 • Q126
A batsman hits back a ball of mass 0.4 kg straight in the direction of the bowler without changing its initial speed of 15 ms–1. The impulse imparted to the ball is _______________Ns.
💡 View Verified Solution & Step Rubric
2) Sol. Impulse = change in momentum = m[v – (–v)] = 2 mv = 2 × 0.4 × 15 = 12 Ns
JEE Main 2022 • Q127
A system to 10 balls each of mass 2 kg are connected via massless and unstretchable string. The system is allowed to slip over the edge of a smooth table as shown in figure. Tension on the string between the 7th and 8th ball is_____________N when 6th ball just leaves the table. 1 ball st 10 ball th
💡 View Verified Solution & Step Rubric
6) m c m c c A A 1 sin t sin t A               c c c c m c m A A sin t cos t cos t 2            c c m m c A A A A 10 2 A 2 2      2 1 1 h 50t gt 2       2 2 1 h 50 t 2 g t 2 2         2 2 1 1 50t gt 50 t 2 g t 2 2 2        2 2 1 100 g t t 2 2          10 100 4t 4 2   <<>> 7 Sol. T taking 8,9,10 together T T = 3 ma = 36 N
JEE Main 2022 • Q128
A wire of length 30 cm, stretched between rigid supports, has it’s nth and (n + 1)th harmonics at 400 Hz and 450 Hz, respectively. If tension in the string is 2700 N, it’s linear mass density is……..kg/m.
💡 View Verified Solution & Step Rubric
Sol.    nv (n 1)v 400 & 450 0.6 0.6           0.6 400 v 1 450 v 0.6  = v = 30    T 30     2700 900 3
JEE Main 2022 • Q129
A uniform disc with mass M = 4 kg and radius R = 10 cm is mounted on a fixed horizontal axle as shown in figure. A block with mass m = 2 kg hangs from a massless cord that is wrapped around the rim of the disc. During the fall of the block, the cord does not slip and there is no friction at the axle. The tension in the cord is ________N. (Take g = 10 ms–2)
💡 View Verified Solution & Step Rubric
0) Sol. 2g – T = 2a …(1)   2 MR TR 2 …(2) a R …(3) T = 2a 2g – T = 2a T = g = 10N
JEE Main 2022 • Q130
In an experment ot verify Newton's law of cooling, a graph is plotted between, the temperature difference (DT) of the water and surroundings and time as shown in figure. The initial temperature of water is taken as 80°C. The value of t2 as mentioned in the graph will be _______. 60 40 20 0 6 t2 Time (minute) DT(°C)
💡 View Verified Solution & Step Rubric
6) Sol. T – T0 (Ti – T0) Bt ms e - 6l = ln 1.5 (6) 40 60e-l = Þ 6l = ln 1.5 2t 20 60e-l = Þ t2 l = ln3 2t ln3 6 ln1.5 = \ t2 = 16.25 min So » 16 <<>> 1 FINAL JEE–MAIN EXAMINATION – JUNE, 2022 (Held On Friday 24th June, 2022) TIME : 3 : 00 PM to 6 : 00 PM CHEMISTRY TEST PAPER WITH SOLUTION SECTION-A
JEE Main 2021 • Q131
The boxes of masses 2 kg and 8 kg are connected by a massless string passing over smooth pulleys. Calculate the time taken by box of mass 8 kg to strike the ground starting from rest. (use g = 10 m/s2) 20cm 2kg 8kg
💡 View Verified Solution & Step Rubric
Sol. m1g 8kg a 2T m2g 2kg T 2a (m1g – 2T) = m1a – (1) T – m2g = m2(2a) 2T – 2m2g = 4m2 a – (2) m1g – 2m2g = (m1 + 4m2) a a =     (8 4)g 4 g g (8 8) 16 4 a = 10 4 m/s2 S = 2 1 at 2   2 0.2 2 4 t 10 t = 0.4 sec <<>> 2
JEE Main 2021 • Q132
On the basis of kinetic theory of gases, the gas exerts pressure because its molecules:
💡 View Verified Solution & Step Rubric
Sol. On the basis of kinetic theory of gases, the gas pressure is due to the molecules suffering change in momentum when impinge on the walls of container. 24th Feb. 2021 | Shift - 2 PHYSICS <<>>
JEE Main 2021 • Q133
Find the ratio of the impulse transferred to the wall by a ball incident normally and then at 45°with normal?
💡 View Verified Solution & Step Rubric
For collision along normal Impulse ( )1 2 p mv ∆ = For collision at 45° Impulse ( ) ( ) 2 2 sin 45 p mv ∆ = ° 2 2 Ratio 2 sin 45 1 mv mv = = °
JEE Main 2021 • Q134
If E and H represents the intensity of electric field and magnetising field respectively, then the unit of E/H will be :
💡 View Verified Solution & Step Rubric
Sol. Unit of E H is volt / metre Ampere / metre = volt Ampere = ohm
JEE Main 2021 • Q135
Given below are two statements : Statement – I: Two photons having equal linear momenta have equal wavelengths. Statement-II: If the wavelength of photon is decreased, then the momentum and energy of a photon will also decrease. In the light of the above statements, choose the correct answer from the options given below.
💡 View Official Answer & Solution Status
Official Correct Option: (4)

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

JEE Main 2021 • Q136
Assume that a tunnel is dug along a chord of the earth, at a perpendicular distance (R/2) from the earth's centre, where 'R' is the radius of the Earth. The wall of the tunnel is frictionless. If a particle is released in this tunnel, it will execute a simple harmonic motion with a time period :
💡 View Verified Solution & Step Rubric
 F O R 2 d FRes x x cos d  If displaced from equilibrium position, Frestoring = 3 GMmd cos R        Re s. 3 3 GMmd x GMmx F d R R    R 3 GMx a R  GMe = gR2 x T 2 a   3 2 3 x R T 2 GMx gR R   R T 2 g   <<>>
JEE Main 2021 • Q137
A solid cylinder of mass m is wrapped with an inextensible light string and, is placed on a rough inclined plane as shown in the figure. The frictional force acting between the cylinder and the inclined plane is : 60° [The coefficient of static friction, µs, is 0.4]
💡 View Verified Solution & Step Rubric
<<>> 6 Sol. 60° f T Let's take solid cylinder is in equilibrium T + f = mg sin60 ....(i) TR – fR = 0 ....(ii) Solving we get q = = req mgsin T f 2 But limiting friction < required friction µmgcos60° < ° mgsin60 2 \ Hence cylinder will not remain in equilibrium Hence f = kinetic = µkN = µkmgcos 60° = mg 5
JEE Main 2021 • Q138
Statement I : A cyclist is moving on an unbanked road with a speed of 7 kmh–1 and takes a sharp circular turn along a path of radius of 2m without reducing the speed. The static friction coefficient is 0.2. The cyclist will not slip and pass the curve (g = 9.8 m/s2) Statement II : If the road is banked at an angle of 45°, cyclist can cross the curve of 2m radius with the speed of 18.5 kmh–1 without slipping. In the light of the above statements, choose the correct answer from the options given below.
💡 View Verified Solution & Step Rubric
Sol. Statement I : = m = ´ ´ max v Rg (0.2) 2 9.8 vmax = 1.97 m/s 7 km/h = 1.944 m/s Speed is lower than vmax, hence it can take safe turn. Statement II vmax = tan Rg 1 tan é ù q + m ê ú - m q ë û = + é ù ´ = ê ú - ë û 1 0.2 2 9.8 5.42 m / s 1 0.2 18.5 km/h = 5.14 m/s Speed is lower than vmax, hence it can take safe turn.
JEE Main 2021 • Q139
The length of metallic wire is l1 when tension in it is T1. It is l2 when the tension is T2. The original length of the wire will be :
💡 View Verified Solution & Step Rubric
From young’s modulus relation F A y l l                     we can write for 1st case   1 1 y T  A      60° 0° B Bv <<>> we can write for 2nd case   2 2 y T  A      1 1 2 2 T  T        1 2 1 2 1 2 T T T T        2 1 1 2 2 1 T – T T – T  l l
JEE Main 2021 • Q140
A moving proton and electron have the same de- Broglie wavelength. If K and P denote the K.E. and momentum respectively. Then choose the correct option :
💡 View Verified Solution & Step Rubric
Sol. P P h P  e e h P  P e  P e P P    2 P P P P K 2m    2 e e e P K 2m  KP < Ke as mP > me Option (1) <<>> 7
JEE Main 2021 • Q141
Two blocks of masses 3 kg and 5 kg are connected by a metal wire going over a smooth pulley. The breaking stress of the metal is S 24 × 102 Nm–2. What is the minimum radius of the wire? (Take g = 10 ms–2) 3kg 5kg
💡 View Verified Solution & Step Rubric
Sol. T 3kg 5kg T u u u  1 2 1 2 2m m g 2 3 5 10 T m m 8 = 75 2 Stress = T A u S uS 2 2 24 75 10 2 R u u u 2 75 3 R 2 24 100 8 24 Ÿ R = 0.125 m R = 12.5 cm <<>> 8 Final JEE-Main Exam August, 2021/26-08-2021/Evening Session SECTION-B
JEE Main 2021 • Q142
The percentage increase in the speed of transverse waves produced in a stretched string if the tension is increased by 4% will be___________%.
💡 View Verified Solution & Step Rubric
Speed of transverse wave is V = T µ n v = 1 1 nT nµ 2 2    v 1 T v 2 T    = 1 4 2  v 2% v   <<>>
JEE Main 2021 • Q143
The mass per unit length of a uniform wire is 0.135 g/cm. A transverse wave of the form y=–0.21sin(x+30t) is produced in it, where x is in meter and t is in second. Then, the expected value of tension in the wire is x × 10–2 N. Value of x is __________. (Round-off to the nearest integer)
💡 View Verified Solution & Step Rubric
215 y = –0.21sin(x+30t) 30 v 30m/s K 1     T v   T = v2 ×  T = (30)2 × 0.135 × 10–1 0.135gm/cm T = 900 × 0.135 × 10–1 0.135 × 3 2 10 kg m 10   T = 12.15N T = 1215 × 10–2 N x 1215 
JEE Main 2021 • Q144
A body of mass 1 kg rests on a horizontal floor with which it has a coefficient of static friction 1 3 . It is desired to make the body move by applying the minimum possible force F N. The value of F will be __________. (Round off to the Nearest Integer) [Take g = 10 ms–2]
💡 View Verified Solution & Step Rubric
Sol. q N F F cos q = mN F sin q + N = mg Þ F = mg cos sin m q + m q Fmin = 2 mg 1 m + m = 1 10 3 5 2 3 ´ =
JEE Main 2021 • Q145
A boy of mass 4 kg is standing on a piece of wood having mass 5kg . If the coefficient of friction between the wood and the floor is 0.5, the maximum force that the boy can exert on the rope so that the piece of wood does not move from its place is ________N.(Round off to the Nearest Integer) [Take g = 10 ms–2] • R • • • T T F T T
💡 View Verified Solution & Step Rubric
0) <<>> 7 Sol. mN T T N 9g N + T = 90 T = m N = 0.5 (90–T) 1.5 T = 45 T = 30
JEE Main 2021 • Q146
When a body slides down from rest along a smooth inclined plane making an angle of 30° with the horizontal, it takes time T. When the same body slides down from the rest along a rough inclined plane making the same angle and through the same distance, it takes time DT, where D is a constant greater than 1. The co-efficient of friction between the body and the rough plane is 1 x § · D ¨ ¸ D © ¹ 2 2 –1 where x = ...........
💡 View Verified Solution & Step Rubric
Sol. a mgsin30° 30° On smooth incline a = g sin30° by S = ut + 2 1at 2 S = 2 2 1 g g T T 2 2 4 …….(i) a mgsin30° 30° µmgcos30 On rough incline a = g sin30° – µg cos 30° by S = ut + 2 1at 2  P D 2 1 S g 1 3 T 4 …(ii) By (i) and (ii)  P D 2 2 2 1 1 gT g 1 3 T 4 4 Ÿ  D2 1 1 3g Ÿ g = § · D  ¨ ¸ D © ¹ 2 2 1 1 . 3 Ÿ x = 3.00
JEE Main 2021 • Q147
The coefficient of static friction between a wooden block of mass 0.5 kg and a vertical rough wall is 0.2. The magnitude of horizontal force that should be applied on the block to keep it adhere to the wall will be ______ N. [g = 10 ms-2]
💡 View Verified Solution & Step Rubric
5 F f =0.2 N mg m Given : s = 0.2 <<>> m = 0.5 kg g = 10 m/s2 we know that fs = N and ....(1) To keep the block adhere to the wall here N = F ...(2) fs = mg ....(3) from equation (1), (2), and (3), we get mg = F  F = mg  F = 0.5 10 0.2  F = 25 N
JEE Main 2021 • Q148
As shown in the figure, a block of mass 3 kg is kept on a horizontal rough surface of coefficient of friction 1 3 3 . The critical force to be applied on the vertical surface as shown at an angle 60° with horizontal such that it does not move, will be 3x. The value of x will be _______. [g=10m/s2; sin 60°= 3 2 ; cos 60°= 1 2 ] 60° 1 3 3  m= 3 kg
💡 View Verified Solution & Step Rubric
.33 m= 3 60° F=3x 1 3 3  60° Fcos60° F=3x N Fsin60° M f=N Mg N = Mg + Fsin60° F 3 N 3g 2   For No slipping Fcos60° = Friction F 1 F 3 N 3g 2 2 3 3            F g F 2 3 6   F F g 2 6 3   6F 2F g 12 3   4F = 4g F = 10 F = 3x F 10 x 3.33 3 3    x 3.33  <<>>
JEE Main 2021 • Q149
An inclined plane is bent in such a way that the vertical cross-section is given by y = 2 x 4 where y is in vertical and x in horizontal direction. If the upper surface of this curved plane is rough with coefficient of friction  = 0.5, the maximum height in cm at which a stationary block will not slip downward is _____ cm.
💡 View Verified Solution & Step Rubric
5 m  2 x y 4  given y = 2 x 4  = 0.5 condition for block will not slip downward mg sin  = mg cos  m mgsin mgcos <<>> tan  =  and we know that tan = dy dx dy dx = x 2 = 0.5 2 x y 4 dy x dx 2                x = 1, put x = 1 in equation y = x2/4  y = 2 (1) 4  y = 1 4  y = 0.25 y = 25 cm
JEE Main 2021 • Q150
A wire having a linear mass density 9.0 × 10–4 kg/m is stretched between two rigid supports with a tension of 900 N. The wire resonates at a frequency of 500 Hz. The next higher frequency at which the same wire resonates is 550 Hz. The length of the wire is ______m.
💡 View Verified Solution & Step Rubric
0) Sol. 4 kg 9.0 10 m    T = 900 N 4 T 900 V 1000m / s 9 10      f1 = 500 Hz f = 550 nV 500 2  …. (i)   n 1 V 500 2   … (ii) (ii) (i) V 50 2  1000 10 2 50   
JEE Main 2021 • Q151
Two solids A and B of mass 1 kg and 2 kg respectively are moving withequal linear momentum. The ratio of their kinetic energies (K.E.)A : (K.E.)B will be A 1 . So the value of A will be ________.
💡 View Verified Solution & Step Rubric
Sol. Given that, 1 2 M 1 M 2  Also, 1 2 p p p   1 1 2 2 M V M V p    Also, we know that +q 12cm 12cm 6cm <<>> 2 p K 2M  2 1 1 p K 2M   & 2 2 2 p K 2M   2 1 2 2 2 1 K 2M p K 2M p    1 2 2 1 K M 2 K M 1    A 2 1 1   A 2  
JEE Main 2021 • Q152
A steel rod with y = 2.0 × 1011 Nm–2 and D = 10–5 °C–1 of length 4 m and area of cross-section 10 cm2 is heated from 0° C to 400°C without being allowed to extend. The tension produced in the rod is x × 105 N where the value of x is .............
💡 View Verified Solution & Step Rubric
Sol. Thermal force F = Ayv'T F = (10 × 10–4) (2 × 1011) (10–5)(400) F = 8 × 105 N Ÿ x = 8
JEE Main 2021 • Q153
A 2 kg steel rod of length 0.6 m is clamped on a table vertically at its lower end and is free to rotate in vertical plane. The upper end is pushed so that the rod falls under gravity, Ignoring the friction due to clamping at its lower end, the speed of the free end of rod when it passes through its lowest position is ............ms–1. (Take g = 10 ms–2)
💡 View Verified Solution & Step Rubric
Sol. Z by energy conservation Z Z A A 2 2 2 1 1 m mg I 2 2 3 Ÿ Z A 6g Speed v = Zr = ZA = A 6g u u v 6 10 .6 6m / s
JEE Main 2021 • Q154
A boy pushes a box of mass 2kg with a force   F 20i 10j     N on a frictionless surface. If the box was initially at rest, then __________m is displacement along the x-axis after 10 s. Sol. 500 F = 20 i+10 j Fx = 20N Fy = 10N 2 x x F 20 a 10 m/s M 2    y 2 y F 10 a 5 m/s M 2    displacement on x axis is Sx = uxt + 1 2 axt2 S = 0 × 10 + 1 2 × 10 × (10)2 S 500m 
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

JEE Main 2021 • Q155
A small block slides down from the top of hemisphere of radius R = 3 m as shown in the figure. The height 'h' at which the block will lose contact with the surface of the sphere is ____m. (Assume there is no friction between the block and the hemisphere) (R–h) A O R h 
💡 View Official Answer & Solution Status
Official Correct Option: (2)

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

JEE Main 2021 • Q156
Two blocks (m = 0.5 kg and M = 4.5 kg) are arranged on a horizontal frictionless table as shown in figure. The coefficient of static friction between the two blocks is 3 7 . Then the maximum horizontal force that can be applied on the larger block so that the blocks move together is ______ N. (Round off to the Nearest Integer) [Take g as 9.8 ms–2] m M F
💡 View Verified Solution & Step Rubric
1) Sol. amax = mg = 3 7 × 9.8 F = (M + m) amax = 5 amax = 21 Newton <<>> 8
JEE Main 2021 • Q157
Two particles having masses 4g and 16g respectively are moving with equal kinetic energies. The ratio of the magnitudes of their linear momentum is n:2. The value of n will be_____.
💡 View Verified Solution & Step Rubric
 relation b/w kinetic energy & momentum is P = 2mKE ( KE = same) 1 1 2 2 p m p m  n 4 2 16  n = 1 <<>>
JEE Main 2021 • Q158
The coefficient of static friction between two blocks is 0.5 and the table is smooth. The maximum horizontal force that can be applied to move the blocks together is .......N. (take g = 10 ms–2) 1 kg 2kg µ=0.5 F Table
💡 View Verified Solution & Step Rubric
5) Sol. 1 kg 2kg µ=0.5 F Table F = 3a (For system) ….(i) 1 fsmax max fs 1a (for 1kg block) ….(ii) µ × 1 × g = a Ÿ 5 = a F = 15N <<>> 1 FINAL JEE–MAIN EXAMINATION – AUGUST, 2021 (Held On Thursday 26th August, 2021) TIME : 3 : 00 PM to 6 : 00 PM CHEMISTRY TEST PAPER WITH SOLUTION SECTION-A
JEE Main 2020 • Q159
If momentum (P), area
💡 View Verified Solution & Step Rubric
[P] = MLT–1  momentum [A] = M0L2T0  Area [T] = M0L0T1  Time Let [E] = PxAyTz ML2T–2 = [MLT–1]x [L2]y [T]z = Mx Lx+2y Tz-x Comparing both sides :- x = 1 .....(i) x + 2y = 2  1 + 2y= 2 or, y = 1 2 .....(ii) z – x = –2  z–1 = –2 or z=–1 .....(iii)  [E] = [P1 A1/2 T–1]
JEE Main 2020 • Q160
A bead of mass m stays at point P (a, b) on a wire bent in the shape of a parabola y = 4Cx2 and rotating with angular speed  (see figure). The value of  is (neglect friction):
💡 View Verified Solution & Step Rubric
y = 4 cx2 dy 8cx dx  2 m a tan mg   y 0 P(a,b) x mg tan= dy dx =8cx 2a 8 cx g   (x = a), 2a 8 c a g   8cg  2 2gc  <<>>
JEE Main 2020 • Q161
Two identical strings X and Z made of same material have tension Tx and Tz in them. If their fundamental frequencies are 450 Hz and 300 Hz, respectively, then the ratio Tx/Tz is :
💡 View Verified Solution & Step Rubric
1 T ƒ 2L   given, x z x z & L L    as identical f T  2 2 2 x x 2 z z T ƒ 450 3 9 T 300 2 4 ƒ                  y x T T = 2.25
JEE Main 2020 • Q162
An insect is at the bottom of a hemispherical ditch of radius 1 m. It crawls up the ditch but starts slipping after it is at height h from the bottom. If the coefficient of friction between the ground and the insect is 0.75, then h is: (g = 10 ms–2)
💡 View Verified Solution & Step Rubric
mg sin h f mg cos mg f = mg sin  f = mg cos  mgcos mgsin    tan 3 tan 4  4 4 cos 5 16 9    4 1 h 1(1 cos ) 1 5 5      1 h 0.2m 5   <<>>
JEE Main 2020 • Q163
Shown in the figure is rigid and uniform one meter long rod AB held in horizontal position by two strings tied to its ends and attached to the ceiling. The rod is of mass `m` and has another weight of mass 2 m hung at a distance of 75 cm from A. The tension in the string at A is:
💡 View Verified Solution & Step Rubric
0 25 50 B 2m A 75 T TB 2mg mg 100 net about B = 0 T × 100cm = mg × 50cm + 2mg × 25cm T = 1 mg
JEE Main 2020 • Q164
A small block starts slipping down from a point B on an inclined plane AB, which is making an angle  with the horizontal section BC is smooth and the remaining section CA is rough with a coefficient of friction . It is found that the block comes to rest as it reaches the bottom (point A) of the inclined plane. If BC = 2AC, the coefficient of friction is given by =k tan . The value of k is __________.
💡 View Verified Solution & Step Rubric
B C A from work energy theorem Wg + Wf =  kE mg 3xsin  – mg cos  x = 0 – 0 mg3x sin mgcos x    3 tan  =  k = 3
JEE Main 2020 • Q165
120 m v m v 2m v/2  In Horizontal Direction By Momentum conservation. v mv mv cos 2m cos 2    1 cos cos    ....(1) In vertical direction By Momentum conservation. v 0 mv sin 2m sin 2    sin sin   2 1 cos 1 sin     120  
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification

Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.

JEE Main 2019 • Q166
A particle of mass m is moving in a straight line with momentum p. Starting at time t = 0, a force F = kt acts in the same direction on the moving particle during time interval T so that its momentum changes from p to 3p. Here k is a constant. The value of T is :-
💡 View Verified Solution & Step Rubric
Sol. dp F kt dt   3P T P O dP kt dt    2 KT 2p 2  P T 2 K  PHYSICS TEST PAPER OF JEE(MAIN) EXAMINATION – 2019 (Held On Friday 11th JANUARY, 2019) TIME : 02 : 30 PM To 05 : 30 PM
JEE Main 2019 • Q167
A liquid of density  is coming out of a hose pipe of radius a with horizontal speed v and hits a mesh. 50% of the liquid passes through the mesh unaffected. 25% looses all of its momentum and 25% comes back with the same speed. The resultant pressure on the mesh will be :
💡 View Verified Solution & Step Rubric
<<>> E 2 JEE (Main) Examination–2019/Morning Session/11-01-2019 Sol. Momentum per second carried by liquid per second is av2 net force due to reflected liquid = 2 1 2 av 4         net force due to stopped liquid = 2 1 av 4  Total force = 2 3 av 4  net pressure = 2 3 v 4
JEE Main 2019 • Q168
Equation of travelling wave on a stretched string of linear density 5 g/m is y = 0.03 sin(450 t – 9x) where distance and time are measured is SI units. The tension in the string is :
💡 View Verified Solution & Step Rubric
Sol. y = 0.03 sin(450 t – 9x) 450 v 50m/s k 9     T T v 2500      T = 2500 × 5 × 10–3 = 12.5 N
JEE Main 2019 • Q169
Two blocks A and B of masses mA = 1 kg and mB = 3 kg are kept on the table as shown in figure. The coefficient of friction between A and B is 0.2 and between B and the surface of the table is also 0.2. The maximum force F that can be applied on B horizontally, so that the block A does not slide over the block B is: [Take g = 10 m/s2] B A F
💡 View Verified Solution & Step Rubric
F f a M m         F (0.2)4 10 F 8 a 4 4           We have F 8 (0.2)10 4    F 8 8    F 16 
JEE Main 2019 • Q170
A block of mass 10 kg is kept on a rough inclined plane as shown in the figure. A force of 3 N is applied on the block. The coefficient of static friction between the plane and the block is 0.6. What should be the minimum value of force P, such that the block doesnot move downward ? 45º 10 kg P 3N (take g = 10 ms-2)
💡 View Verified Solution & Step Rubric
Sol. 45º 10 kg P 3N µ = 0.6 100 mgsin 45 50 2 2   1 mgcos 0.6 mg 0.6 50 2 2       P 31.28 32N   P µmgcos 73.7=3+mgsin
JEE Main 2019 • Q171
A uniform rod of length l is being rotated in a horizontal plane with a constant angular speed about an axis passing through one of its ends. If the tension generated in the rod due to rotation is T(x) at a distance x from the axis, then which of the following graphs depicts it most closely?
💡 View Verified Solution & Step Rubric
Sol. x Tx   2 2 2 2 x M M L x T (L x) (L x ) x L 2L 2        <<>>
JEE Main 2019 • Q172
A wedge of mass M = 4m lies on a frictionless plane. A particle of mass m approaches the wedge with speed v. There is no friction between the particle and the plane or between the particle and the wedge. The maximum height climbed by the particle on the wedge is given by :
💡 View Verified Solution & Step Rubric
Sol. mv = (4m + m)v  Common speed v v 5  mgh + 2 2 1 v 1 5m mv 2 25 2    mgh = 2 2 1 1 1 4 mv 1– mv 2 5 2 5         2 2 2mv 2v h 5 mg 5g   
JEE Main 2019 • Q173
A string of length 1 m and mass 5 g is fixed at both ends. The tension in the string is 8.0 N. The siring is set into vibration using an external vibrator of frequency 100 Hz. The separation between successive nodes on the string is close to :
💡 View Verified Solution & Step Rubric
Sol. Velocity of wave on string T 8 V 1000 40m /s 5      Now, wavelength of wave v 40 m n 100   Separation b/w successive nodes, 20 100   m = 20 cm
JEE Main 2019 • Q174
A block kept on a rough inclined plane, as shown in the figure, remaias at rest upto a maximum force 2 N down the inclined plane. The maximum external force up the inclined plane that does not move the block is 10 N. The coefficient of static friction betwreen the block and the plane is : [Take g = 10 m/s2] 30º 2 N 10 N
💡 View Verified Solution & Step Rubric
Sol. 2 + mg sin30 = µmg cos30° 10 = mgsin 30 + µ mg cos30° = 2µmg cos30 –2 6 = µmg cos 30 4 = mg sin 30 3 µ 3 2   µ = 3 2
JEE Main 2019 • Q175
A man (mass = 50 kg) and his son (mass = 20 kg) are standing on a frictionless surface facing each other. The man pushes his son so that he starts moving at a speed of 0.70 ms–1 with respect to the man. The speed of the man with respect to the surface is :
💡 View Verified Solution & Step Rubric
Sol. 50 V1 = 20 V2 V1 + V2 = 0.70 V1 = 0.20 <<>>
JEE Main 2019 • Q176
Light is incident normally on a completely absorbing surface with an energy flux of 25 Wcm–2. If the surface has an area of 25 cm2, the momentum transferred to the surface in 40 min time duration will be :
💡 View Verified Solution & Step Rubric
Sol. P = E C  = 8 (25 25) 40 60 3 10     N-s = 5 × 10–3 N-s
JEE Main 2019 • Q177
A ball is thrown vertically up (taken as + z-axis) from the ground. The correct momentum-height (p-h) diagram is:
💡 View Verified Solution & Step Rubric
0 V V 2gh   Direction of velocity changes at top most point