NEET UG 2026 • Q1
Repeated in 2016, 2017, 2018, 2020, 2021, 2022, 2023, 2024, 2025, 2026
A particle of mass M moves along a horizontal x axis from x=0 to x = L. The coefficient of kinetic friction varies as a function of x as $\mu_k(x) = \mu_0 - \alpha x$, where $\mu_0$, $\alpha$ are constants of appropriate dimensions, so that $\mu_k(L)=0$. The total work done by the frictional force during the motion is $n \mu_0 MgL$, where g is the acceleration due to gravity. The value of n is :
💡 View Official Answer & Solution Status
Official Correct Option: (D)
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
NEET UG 2026 • Q2
Repeated in 2018, 2021, 2024, 2025, 2026
A frictionless circular wire of unit radius is fixed on the horizontal plane. Two point particles of unit mass start moving simultaneously from point $A\left(\theta = \frac{\pi}{2}\right)$ with identical uniform angular speeds in opposite directions, and meet again at point $B\left(\theta = -\frac{\pi}{2}\right)$. During this time, which of the following figures schematically represent the magnitude of the total linear momentum $P$ of the system, as a function of $\theta$?
(A) figure (1)
(B) figure (2)
(C) figure (3)
(D) figure (4)
💡 View Official Answer & Solution Status
Official Correct Option: (C)
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
NEET UG 2026 • Q3
Repeated in 2016, 2017, 2018, 2020, 2021, 2022, 2023, 2024, 2025, 2026
A car travels on a circular racetrack of radius $50 \text{ m}$, which is banked at an angle $\theta$. If the car travels at a speed $10 \text{ ms}^{-1}$, then the wear and tear on its tyres is minimum. Taking the acceleration due to gravity to be $10 \text{ ms}^{-2}$, the value of $\theta$ is :
(A) $\tan^{-1}\left(\frac{1}{5}\right)$
(B) $\tan^{-1}\left(\frac{2}{5}\right)$
(C) $\tan^{-1}(\sqrt{3}/2)$
(D) $\tan^{-1}(2\sqrt{3})$
💡 View Official Answer & Solution Status
Official Correct Option: (A)
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
NEET UG 2025 • Q4
Repeated in 2018, 2021, 2024, 2025, 2026
There are two inclined surfaces of equal length ($L$) and same angle of inclination $45^\circ$ with the horizontal. One of them is rough and the other is perfectly smooth. A given body takes $2$ times as much time to slide down on rough surface than on the smooth surface. The coefficient of kinetic friction ($\mu_k$) between the object and the rough surface is close to
(A) $0.25$
(B) $0.40$
(C) $0.5$
(D) $0.75$
💡 View Official Answer & Solution Status
Official Correct Option: (D)
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
NEET UG 2025 • Q5
Repeated in 2018, 2021, 2024, 2025, 2026
A ball of mass $0.5 \text{ kg}$ is dropped from a height of $40 \text{ m}$. The ball hits the ground and rises to a height of $10 \text{ m}$. The impulse imparted to the ball during its collision with the ground is (Take $g = 9.8 \text{ m/s}^2$)
(A) $21 \text{ NS}$
(B) $7 \text{ NS}$
(C) $0$
(D) $84 \text{ NS}$
💡 View Official Answer & Solution Status
Official Correct Option: (A)
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
NEET UG 2025 • Q6
Repeated in 2018, 2021, 2024, 2025, 2026
A uniform rod of mass $20\text{ kg}$ and length $5\text{ m}$ leans against a smooth vertical wall making an angle of $60^{\circ}$ with it. The other end rests on a rough horizontal floor. The friction force that the floor exerts on the rod is (Take $g = 10\text{ m/s}^2$)
(A) $100\text{ N}$
(B) $100\sqrt{3}\text{ N}$
(C) $200\text{ N}$
(D) $200\sqrt{3}\text{ N}$
💡 View Official Answer & Solution Status
Official Correct Option: (B)
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
NEET UG 2024 • Q7
Repeated in 2018, 2021, 2024, 2025, 2026
A horizontal force 10 N is applied to a block A as shown in figure. The mass of blocks A and B are 2 kg and 3
kg respectively. The blocks slide over a frictionless surface. The force exerted by block A on block B is :
(A) Zero
(B) 4 N
(C) 6 N
(D) 10 N
💡 View Official Answer & Solution Status
Official Correct Option: (C)
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
NEET UG 2021 • Q8
Repeated in 2018, 2021, 2024, 2025, 2026
Water falls from a height of 60 m at the rate of
15 kg/s to operate a turbine. The losses due to
frictional force are 10% of the input energy. How
much power is generated by the turbine?
(g = 10 m/s2)
(A) 10.2 kW
(B) 8.1 kW
(C) 12.3 kW
(D) 7.0 kW
💡 View Official Answer & Solution Status
Official Correct Option: (B)
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
NEET UG 2021 • Q9
Repeated in 2018, 2021, 2024, 2025, 2026
A ball of mass 0.15 kg is dropped from a height 10 m,
strikes the ground and rebounds to the same height.
The magnitude of impulse imparted to the ball is
(g = 10 m/s2) nearly
(A) 0 kg m/s
(B) 4.2 kg m/s
(C) 2.1 kg m/s
(D) 1.4 kg m/s
💡 View Official Answer & Solution Status
Official Correct Option: (B)
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
NEET UG 2019 • Q10
Repeated in 2016, 2017, 2018, 2019, 2021, 2022, 2024, 2026
A block of mass 10 kg is in contact against the
inner wall of a hollow cylindrical drum of
radius 1 m. The coefficient of friction between
the block and the inner wall of the cylinder is
0.1. The minimum angular velocity needed for
the cylinder to keep the block stationary when
the cylinder is vertical and rotating about its
axis, will be :
2
(g
10 m/s )
(A) 10 rad/s
(B) 10 rad/s 2
(C) 10 rad/s
(D) 10rad/s
💡 View Official Answer & Solution Status
Official Correct Option: (C)
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
NEET UG 2018 • Q11
Repeated in 2018, 2021, 2024, 2025, 2026
A body initially at rest and sliding along a
frictionless track from a height h (as shown in
the figure) just completes a vertical circle of
diameter AB = D. The height h is equal to
B
A
h
(A) 7 D
(B) D
(C) 3D
(D) 5 D
💡 View Official Answer & Solution Status
Official Correct Option: (D)
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.
NEET UG 2016 • Q12
Repeated in 2016, 2017, 2018, 2019, 2021, 2022, 2024, 2026
A car is negotiating a curved road of radius R. The road is banked at an angle θ. The coefficient of friction
between the tyres of the car and the road is μs. The maximum safe velocity on this road is:
(A) $√gR2 μs+tanθ 1−μs tan θ$
(B) $√gR μs+tanθ 1−μs tan θ$
(C) $√ g R μs+tanθ 1−μs tan θ$
(D) $√ g R2 μs+tanθ 1−μs tan θ$
💡 View Official Answer & Solution Status
Official Answer: Solution under certified teacher verification
Official marking scheme solution not verified yet — answer key only. Intermediate derivations are under certified teacher review against official board guidelines.